Nanozymes with Peroxidase-like Activity for Ferroptosis-Driven Biocatalytic Nanotherapeutics of Glioblastoma Cancer: 2D and 3D Spheroids Models.

Glioblastoma (GBM) is the most common primary brain cancer in adults. Despite the remarkable advancements in recent years in the realm of cancer diagnosis and therapy, regrettably, GBM remains the most lethal form of brain cancer. In this view, the fascinating area of nanotechnology has emerged as an innovative strategy for developing novel nanomaterials for cancer nanomedicine, such as artificial enzymes, termed nanozymes, with intrinsic enzyme-like activities. Therefore, this study reports for the first time the design, synthesis, and extensive characterization of innovative colloidal nanostructures made of cobalt-doped iron oxide nanoparticles chemically stabilized by a carboxymethylcellulose capping ligand (i.e., Co-MION), creating a peroxidase-like (POD) nanozyme for biocatalytically killing GBM cancer cells. These nanoconjugates were produced using a strictly green aqueous process under mild conditions to create non-toxic bioengineered nanotherapeutics against GBM cells. The nanozyme (Co-MION) showed a magnetite inorganic crystalline core with a uniform spherical morphology (diameter, 2R = 6-7 nm) stabilized by the CMC biopolymer, producing a hydrodynamic diameter (HD) of 41-52 nm and a negatively charged surface (ZP~-50 mV). Thus, we created supramolecular water-dispersible colloidal nanostructures composed of an inorganic core (Cox-MION) and a surrounding biopolymer shell (CMC). The nanozymes confirmed the cytotoxicity evaluated by an MTT bioassay using a 2D culture in vitro of U87 brain cancer cells, which was concentration-dependent and boosted by increasing the cobalt-doping content in the nanosystems. Additionally, the results confirmed that the lethality of U87 brain cancer cells was predominantly caused by the production of toxic cell-damaging reactive oxygen species (ROS) through the in situ generation of hydroxyl radicals (·OH) by the peroxidase-like activity displayed by nanozymes. Thus, the nanozymes induced apoptosis (i.e., programmed cell death) and ferroptosis (i.e., lipid peroxidation) pathways by intracellular biocatalytic enzyme-like activity. More importantly, based on the 3D spheroids model, these nanozymes inhibited tumor growth and remarkably reduced the malignant tumor volume after the nanotherapeutic treatment (ΔV~40%). The kinetics of the anticancer activity of these novel nanotherapeutic agents decreased with the time of incubation of the GBM 3D models, indicating a similar trend commonly observed in tumor microenvironments (TMEs). Furthermore, the results demonstrated that the 2D in vitro model overestimated the relative efficiency of the anticancer agents (i.e., nanozymes and the DOX drug) compared to the 3D spheroid models. These findings are notable as they evidenced that the 3D spheroid model resembles more precisely the TME of "real" brain cancer tumors in patients than 2D cell cultures. Thus, based on our groundwork, 3D tumor spheroid models might be able to offer transitional systems between conventional 2D cell cultures and complex biological in vivo models for evaluating anticancer agents more precisely. These nanotherapeutics offer a wide avenue of opportunities to develop innovative nanomedicines for fighting against cancerous tumors and reducing the frequency of severe side effects in conventionally applied chemotherapy-based treatments.

Photophysical, photobiological, and biomolecule-binding properties of new tri-cationic meso-tri(2-thienyl)corroles with Pt(II) and Pd(II) polypyridyl derivatives.

We report the synthesis and characterization of new tri-cationic corrole derivatives, containing Pt(II) or Pd(II) complexes attached at the peripheral position of thienyl moieties. Corrole derivatives were characterized through microanalysis, electrochemical, spectrometry and spectroscopy analysis. Singlet and triplet excited-states are investigated by photophysical/theoretical calculation methods and photobiological parameters were also evaluated spectroscopic techniques (UV-Vis and EPR). Also, the binding capacity of each corrole derivative with nucleic acids (DNA) and human serum albumin (HSA) was determined by UV-Vis, steady-state, and time-resolved fluorescence spectroscopy, combined with molecular docking analysis. Moreover, the new corroles containing peripheral complexes improve their interactions with biomacromolecules, generate reactive oxygen species under light source irradiation studied and has potential for application in photodynamic therapeutic processes.

Post-synthetic modification of aluminum trimesate and copper trimesate with TiO2 nanoparticles for photocatalytic applications.

Organic pollutants have been a significant source of concern in recent years due to their facile dissemination and harmful effects. In this work, two different metal-organic frameworks (MOFs) were initially prepared by hydrothermal treatment, namely aluminum trimesate (MIL-100(Al)) and copper trimesate (HKUST-1). These materials were subsequently submitted to a post-synthetic modification step to grow titania nanoparticles on their surface. Anatase nanoparticles with sizes around 5 nm were successfully anchored on MIL-100(Al), and the concentration of TiO2 in this sample was about 68 wt.%. This is the first time that this composite (TiO2@MIL-100(Al)) is reported in the literature. It showed an improved photocatalytic activity, removing 90% of methylene blue (k app = 1.29 h-1), 55% of sodium diclofenac (k app = 0.21 h-1), and 62% of ibuprofen (k app = 0.37 h-1) after four hours of illumination with UV-A light. A significant concentration (14 µM) of reactive oxygen species (ROS) was detected for this composite. HKUST-1 showed a structural collapse during its post-synthetic modification, leading to a non-porous material and providing fewer sites for the heterogeneous nucleation of titania. This behavior led to a low concentration of rutile nanoparticles on HKUST-1 (9 wt.%). However, the obtained composite (TiO2@HKUST) also showed an improved photoactivity compared to HKUST-1, increasing the photodegradation rates evaluated for methylene blue (0.05 h-1 vs. 0.29 h-1), sodium diclofenac (negligible vs. 0.03 h-1), and ibuprofen (0.01 h-1 vs. 0.02 h-1). This work brings new insights concerning the preparation of photocatalysts by growing semiconductor nanoparticles on trimesate-based MOFs.

Detection of singlet oxygen by EPR: The instability of the nitroxyl radicals.

The use of spin traps and redox probes coupled with electron paramagnetic resonance (EPR) is a method frequently applied in the evaluation of the efficiency of photosensitizers and photocatalysts in phototherapeutic and photocatalytic processes that involve reactive oxygen species. In this way, the method helps to clarify the mechanism behind photo-induced reactions. Hydroxy-TEMP is a very specific redox probe for selectively identifying and quantifying singlet oxygen (1O2). In this work, the kinetics of radical generated by the oxidation products of the Hydroxy-TEMP redox probe was analyzed from EPR spectra in aqueous solutions of several water-soluble porphyrins ([H2T4MPyP](OTs)4, Na4[H2T4SPP], [H2T2MPyP](OTs)4, [ZnT4MyPyP](OTs)4, [MnT4MyPyP](OTs)5, H2T4CPP, and [H2T4TriMAPP](OTs)4) under white light illumination. Different factors such as the concentration of the redox probe, pH of the medium, and photostability of the porphyrins were evaluated. A systematic study was carried out to reveal the factors associated with stable radical degradation (TEMPOL) by illumination in the visible spectral region in systems containing photosensitizer (porphyrin) and redox probe (Hydroxy-TEMP). With the aid of EPR and gas chromatography coupled with mass spectroscopy (GC-MS) techniques, the mechanism of the radical degradation and the photobleaching of porphyrins were investigated. After successive interactions with the porphyrin in its excited state, in alkaline aqueous solution (pH > 10), the free radical TEMPOL is transformed into TEMPONE until the final diamagnetic product Phorone. A protocol was elaborated to identify and quantify the generation of 1O2 by Hydroxy-TEMP reliably, to avoid possible errors in the interpretation of efficiency of photosensitizers.

Peroxidation and photo-peroxidation of pantoprazole in aqueous solution using silver molybdate as catalyst.

In this study, silver molybdate was used as a catalyst in different oxidation processes to degrade pantoprazole (PAN) from aqueous suspension. The catalyst was synthesized using a controlled precipitation method and characterized by XRD, FTIR spectroscopy, BET analysis, Zeta potential, FEG-SEM/EDS, DRS and EPR. The α- and ß-phases of Ag2MoO4 were identified as crystalline structure of the butterfly-shaped particles. The metastable α-phase could be completely converted into ß-Ag2MoO4 by thermal treatment at 300 °C. The band gap energy of ß-Ag2MoO4 (Eg = 3.25 eV) is slightly higher than for as-prepared catalyst (α-Ag2MoO4 + ß-Ag2MoO4) (Eg = 3.09 eV), suggesting that as-prepared catalyst should be active under visible light. PAN is sensible to UV light irradiation, and the addition of H2O2 as electron acceptor enhanced the mineralization rate. In the catalytic UV-based reactions, high PAN oxidation efficiencies were obtained (>85%) but with low mineralization (32-64%). Catalytic peroxidation and photo-catalytic peroxidation under visible light showed the highest PAN oxidation efficiency, leading to its almost complete mineralization (>95%), even under dark conditions (98% in 120 min). Several degradation byproducts were identified and three mechanistic routes of PAN decomposition were proposed. The identified byproducts are less toxic than the parent compound. EPR coupled with the spin trapping method identified •OH radicals as the main ROS species in both photocatalytic and catalytic peroxidation reactions. Ag2MoO4 showed to be a promising catalyst to promote the decomposition of hydrogen peroxide into ROS.1.

Amoxicillin photodegradation under visible light catalyzed by metal-free carbon nitride: An investigation of the influence of the structural defects.

Herein, the structural defects of metal-free polymeric carbon nitrides were controlled by making use of different precursors in their syntheses, i.e. melamine (CN-M) and thiourea (CN-T), as well as a 1:1 mixture of them (CN-1M:1 T). By controlling the structural defects, the electronic, morphological and chemical properties were modified. Additionally, the activities of synthesized PCNs were evaluated for amoxicillin photodegradation under visible light irradiation (16 mW cm-2). The results of photocatalytic tests showed that CN-T material has better efficiency (100 % removal within 48 h), which is directly related to the greater number of defects present in its structure with consequent improvement of electron-hole pairs separation efficiency. The CN-T material showed excellent stability with only 13 % decrease in its photocatalytic activity after the third cycle. A mechanism for amoxicillin degradation by CN-T was proposed based on the ESI-MS and the in situ EPR allied with spin trapping method investigations.

Photophysical and electrochemical properties of two trans-A2B-corroles: differences between phenyl or pyrenyl groups at the meso-10 position.

The present study reports on the optical and photophysical properties of trans-A2B-corroles possessing pyrenyl units attached at the meso-10-position and compares them with those of model trans-A2B-corroles having phenyl substituents at that position. In contrast to the model meso-substituted corrole, the new pyrenyl-corrole shows slightly red-shifted absorption bands and blue-shifted emission, slightly higher fluorescence quantum yield, and more importantly, it shows better photo-stability under white-light illumination. Theoretical calculations were used to determine the electronic transitions and geometries of the singlet and triplet excited states (TD-DFT and NTO). Moreover, we demonstrate that the pyrenyl-corrole in analogy to previously studied model corroles is able to generate reactive oxygen species (ROS) under visible light using photo-degradation of 1,3-diphenylisobenzofuran (DBPF), a singlet oxygen quencher, and EPR spectroscopy allied with the spin-trapping method is used for identifying singlet oxygen species. The results show that the pyrenyl unit attached at the meso-10-position of the corrole increases the photo-stability and efficiency in ROS generation compared to the phenyl substituent.

Photophysical, photodynamical, redox properties and BSA interactions of novel isomeric tetracationic peripheral palladium(II)-bipyridyl porphyrins.

New isomeric tetra-cationic porphyrins containing peripheral [Pd(bpy)Cl]+ units attached to pyridyl substituents were synthesized and fully characterized. The porphyrins present an intense Soret band located in the blue spectral region and an additional four weaker red-shifted Q bands in the visible spectral region (about 500-700 nm). The obtained Strickler-Berg parameters indicate fully spin and symmetry allowed transitions for all the observed absorption bands. Both porphyrins present two fluorescence emission bands, an intense one located around 650 nm and an additional weak red-shifted emission at ∼710 nm. Fluorescence decay time profiles were obtained showing bi-exponential decay. The interaction of the porphyrins with bovine serum albumin (BSA) was studied in detail by a fluorescence quenching method and molecular docking analysis. In addition, the photodynamical activity of the porphyrins in the photooxidation of BSA was determined and compared with the light-induced formation of reactive oxygen species (ROS) by electron paramagnetic resonance (EPR) allied with the spin trapping method. The results show that the Pd(ii)-bypyridyl tetra-cationic porphyrins are promising candidates for the photooxidation of biological substrates used in photodynamic therapy (PDT).