Peeling mechanism of tomato induced by HHAIB: Microscopic, ultrastructure, chemical, physical and mechanical properties perspectives.

In order to better manage the peeling degree and avoid unnecessary losses, the current work aimed to explore the peeling mechanism of a novel peeling technology, high-humidity hot air impingement blanching (HHAIB). The relationships between HHAIB peeling performance and the changes in skin temperature, skin structure, water state, pectin fractions content, and skin mechanical properties of tomatoes were analyzed. Results showed, after HHAIB treatment, the epicuticular wax was disrupted, the skin exhibited more and longer random cracks, the degradation of inner skin tissue was observed by transmission electron microscopy, the free water percentage increased resulting in water loss in the whole tomato, the water-soluble pectin contents decreased in tomato fleshes, while the contents of chelate-soluble pectin and sodium-carbonate-soluble pectin increased. HHAIB heating reduced the elongation at break, and increased Young's Modulus of tomato peel. This study revealed the HHAIB peeling mechanism and provided new insights for developing HHAIB peeling technology.

Artificial Neural Network Modeling and Genetic Algorithm Multiobjective Optimization of Process of Drying-Assisted Walnut Breaking.

This study combined an artificial neural network (ANN) with a genetic algorithm (GA) to obtain the model and optimal process parameters of drying-assisted walnut breaking. Walnuts were dried at different IR temperatures (40 °C, 45 °C, 50 °C, and 55 °C) and air velocities (1, 2, 3, and 4 m/s) to different moisture contents (10%, 15%, 20%, and 25%) by using air-impingement technology. Subsequently, the dried walnuts were broken in different loading directions (sutural, longitudinal, and vertical). The drying time (DT), specific energy consumption (SEC), high kernel rate (HR), whole kernel rate (WR), and shell-breaking rate (SR) were determined as response variables. An ANN optimized by a GA was applied to simulate the influence of IR temperature, air velocity, moisture content, and loading direction on the five response variables, from which the objective functions of DT, SEC, HR, WR, and SR were developed. A GA was applied for the simultaneous maximization of HR, WR, and SR and minimization of DT and SEC to determine the optimized process parameters. The ANN model had a satisfactory prediction ability, with the coefficients of determination of 0.996, 0.998, 0.990, 0.991, and 0.993 for DT, SEC, HR, WR, and SR, respectively. The optimized process parameters were found to be 54.9 °C of IR temperature, 3.66 m/s of air velocity, 10.9% of moisture content, and vertical loading direction. The model combining an ANN and a GA was proven to be an effective method for predicting and optimizing the process parameters of walnut breaking. The predicted values under optimized process parameters fitted the experimental data well, with a low relative error value of 2.51-3.96%. This study can help improve the quality of walnut breaking, processing efficiency, and energy conservation. The ANN modeling and GA multiobjective optimization method developed in this study provide references for the process optimization of walnut and other similar commodities.

Changes in, and correlation analysis of, volatile compounds, key enzymes, and fatty acids in lemon juice vesicles during freeze drying and hot-air drying.

BACKGROUND: Lemon juice vesicles are distinguished by their unique and abundant volatile flavor compounds, which can undergo complex changes during drying. In this study, integrated freeze drying (IFD), conventional freeze drying (CFD), and hot-air drying (AD) were used to dry lemon juice vesicles to investigate the changes in, and correlations among volatile compounds, fatty acids, and key enzyme activity during the drying process. RESULTS: Twenty-two volatile compounds were detected during the drying processes. Compared with fresh samples, seven compounds were lost in the dried samples after IFD, seven after CFS, and six after AD, and the loss rates of the total content of volatile compounds in the dried samples were 82.73% in CFD, more than 71.22% in IFD, and more than 28.78% in AD. In total, 1.015 mg/g of seven fatty acids were detected in the fresh samples; the content loss rates of total fatty acids after drying were 67.68% in AD, more than 53.00% in CFD, and more than 36.95% in IFD, respectively. During the three drying processes, IFD retained relatively higher enzyme activity in the samples. CONCLUSION: Many positive and negative correlations (P < 0.05) were observed among the key enzyme effects, fatty acids, and volatile compounds, showing close associations. The current work provides information that is important for the selection of suitable drying techniques for lemon juice vesicles and suggests how to control their flavor during the drying process. © 2023 Society of Chemical Industry.

Pulsed Vacuum Drying of Persimmon Slices: Drying Kinetics, Physicochemical Properties, Microstructure and Antioxidant Capacity.

In order to explore an alternative drying method to enhance the drying process and quality of persimmon slices, pulsed vacuum drying (PVD) was employed and the effects of different drying temperatures (60, 65, 70, and 75 °C) on drying kinetics, color, rehydration ratio (RR), microstructure, bioactive compounds, and the antioxidant capacity of sliced persimmons were investigated in the current work. Results showed that the rehydration ratio (RR) of the samples under PVD was significantly higher than that of the traditional hot air-dried ones. Compared to the fresh samples, the dried persimmon slices indicated a decrease in the bioactive compounds and antioxidant capacity. The total phenolic content (TPC) of PVD samples at 70 °C was 87.96% higher than that of the hot air-dried persimmon slices at 65 °C. Interestingly, at 70 °C, the soluble tannin content and TPC of the PVD samples reached the maximum values of 6.09 and 6.97 mg GAE/g, respectively. The findings in the current work indicate that PVD is a promising drying method for persimmon slices as it not only enhances the drying process but also the quality attributes.

A comprehensive review on innovative and advanced stabilization approaches of anthocyanin by modifying structure and controlling environmental factors.

Anthocyanins are pigments abundant in fruits and vegetables, and commonly applied in foods due to attractive colour and health-promoting benefits. However, instability of anthocyanins leads to their easy degradation, reduced bioactivity, and colour fading in food processing, limiting their application and causing economic losses. Stability of anthocyanins depends on their own structures and environmental factors. For structural factors, modification including copigmentation, acylation and biosynthesis is a potential solution to increase anthocyanin stability due to forming stable structures. With regard to environmental factors, encapsulation such as microencapsulation, liposome and nanoparticles has been shown effectively to enhance the stability. We proposed the potential challenges and perspectives for the diversification of anthocyanin-rich products for food application, particularly, introduction of hazards, technical limitations, interaction with other ingredients in food system and exploration of pyranoanthocyanins. The integrated strategies are warranted for improving anthocyanin stabilization for promoting their further application in food industry.

Guidelines on reporting treatment conditions for emerging technologies in food processing.

In the last decades, different non-thermal and thermal technologies have been developed for food processing. However, in many cases, it is not clear which experimental parameters must be reported to guarantee the experiments' reproducibility and provide the food industry a straightforward way to scale-up these technologies. Since reproducibility is one of the most important science features, the current work aims to improve the reproducibility of studies on emerging technologies for food processing by providing guidelines on reporting treatment conditions of thermal and non-thermal technologies. Infrared heating, microwave heating, ohmic heating and radiofrequency heating are addressed as advanced thermal technologies and isostatic high pressure, ultra-high-pressure homogenization sterilization, high-pressure homogenization, microfluidization, irradiation, plasma technologies, power ultrasound, pressure change technology, pulsed electric fields, pulsed light and supercritical CO2 are approached as non-thermal technologies. Finally, growing points and perspectives are highlighted.

Structural characterization and antioxidant activities of one neutral polysaccharide and three acid polysaccharides from Ziziphus jujuba cv. Hamidazao: A comparison.

A neutral polysaccharide (HJP-1a) and three acid polysaccharides (HJP-2, HJP-3 and HJP-4) were obtained from Z. jujuba cv. Hamidazao. HJP-1a was mainly composed of arabinose and galactose in a ratio of 56.9:20.0, with an average molecular weight of 3.115 × 104 g/mol. HJP-2, HJP-3 and HJP-4 were homogeneous heteropolysaccharides mainly containing galacturonic acid, arabinose and galactose, with average molecular weights of 4.590 × 104, 6.986 × 104 and 1.951 × 105 g/mol, respectively. Structural characterization indicated that the backbone of HJP-3 appeared to be mainly composed of →4)-α-d-GalpA (1→ and →2,4)-α-l-Rhap (1→ residues with some branches consisting of →5)-α-l-Araf (1→ residues and terminals of T-α-l-Araf (1→ and T-ß-d-Galp residues. The four purified fractions displayed dose-dependent radical scavenging activity on ABTS+ radicals and reducing capacity, as well as excellent protective effect on H2O2-induced HepG2 cells and metronidazole-damaged zebrafish embryos, especially HJP-2 in vitro and HJP-1a in vivo. Therefore, the polysaccharides from Z. jujuba cv. Hamidazao could be used as a potential antioxidant in functional foods.

Improving Biosecurity Procedures to Minimize the Risk of Spreading Pathogenic Infections Agents After Carcass Recycling.

Animal proteins are essential elements of human and animal feed chain and improving the safety of human and animal feed requires understanding and controlling of the transmission of infectious agents in food chain. Many pathogenic infectious agents, such as prion protein is known to damage the central nervous system in the cattle. Bovine spongiform encephalopathy (BSE) results from infection agent (prion), and affects number of species such as cattle, human, and cats. In addition, Salmonella, pathogenic E. coli O157:H7, and Listeria monocytogenes were found in animal by-products used in the human and animal feed production. Increased interest in controlling microbial risks in human and animal feed is evidenced by a large number of publications, which highlights the need for examining the animal disposal method such as rendering process and provides a broader perspective of rendering process. While existing practices help greatly in controlling microbial contamination, this overview study showed that additional biosafety measures are necessary to ensure microbial safety in animal feed.

Characterization and management strategies for process discharge streams in California industrial tomato processing.

The California tomato industry is the leading processor of tomatoes in the world. Accordingly, it produces a large amount of solid and liquid byproducts during processing. Some of these byproducts are under-utilized and discarded. There is increasing demand for the conversion of tomato byproducts into value-added products. This study reviews the characteristics of solid residue and process water discharge streams generated at different stages of tomato processing in addition to their current management strategies. Furthermore, relevant policy that governs management of solid and liquid organic byproducts for California tomato processors is discussed. Finally, recommendations for novel and sustainable management strategies are explored.

Emerging chemical and physical disinfection technologies of fruits and vegetables: a comprehensive review.

With a growing demand for safe, nutritious, and fresh-like produce, a number of disinfection technologies have been developed. This review comprehensively examines the working principles and applications of several emerging disinfection technologies. The chemical treatments, including chlorine dioxide, ozone, electrolyzed water, essential oils, high-pressure carbon dioxide, and organic acids, have been improved as alternatives to traditional disinfection methods to meet current safety standards. Non-thermal physical treatments, such as UV-light, pulsed light, ionizing radiation, high hydrostatic pressure, cold plasma, and high-intensity ultrasound, have shown significant advantages in improving microbial safety and maintaining the desirable quality of produce. However, using these disinfection technologies alone may not meet the requirement of food safety and high product quality. Several hurdle technologies have been developed, which achieved synergistic effects to maximize lethality against microorganisms and minimize deterioration of produce quality. The review also identifies further research opportunities for the cost-effective commercialization of these technologies.