Abortion by request in advanced maternal age: What changes in contraception? / Interrupción voluntaria del embarazo en edad materna avanzada: ¿qué cambia en la anticoncepción?

Overview and aim: Pregnancy at an advanced maternal age has become a reality. The acceptance rate of an unwanted pregnancy in this age group is lower, resulting in a higher proportion of pregnancy interruptions. This study aims to characterize abortion by request (AR) in advanced maternal age. Methods: Descriptive study of AR requested by women aged 40 years old or older, over a period of six years, in an Obstetrics service of a Portuguese tertiary hospital. Descriptive data analysis was performed using SPSS® version 26. Results: 194 women were included in the study (n=194), with a median age of 42 years, most of them Portuguese (94.3%) and with no history of performing AR (75.2%). The contraceptive methods used prior to AR were used oral contraception (47.0%) and barrier contraception (39.1%). Medical abortion was performed in the entire sample, with a success rate of 96.9%. After AR, intrauterine contraception (44.3%), oral contraception (22.7%) and the vaginal ring (7.2%) were the preferred contraceptive methods. Discussion/Conclusions: Changes in women's health and contraceptive needs motivate new approaches and contraceptive strategies. After AR, a significant percentage of woman chose long-term and non-user-dependent methods. Particularly in women aged 40 or over, these methods, in addition to their highly effective and safe contraceptive role, may bring additional non-contraceptive benefits, namely the therapeutic effect in abnormal uterine bleeding.(AU)

Introducción y objetivoEl embarazo a una edad materna avanzada se ha convertido en una realidad. La tasa de aceptación de un embarazo no deseado en esta edad es menor, lo que se traduce en una mayor proporción de interrupciones del embarazo. Este estudio tiene como objetivo caracterizar la interrupción voluntaria del embarazo (IVE) en edad materna avanzada.MétodosEstudio descriptivo de las IVE solicitadas por mujeres de 40 años o más, durante un período de 6 años, en un servicio de obstetricia de un hospital terciario portugués. El análisis descriptivo de los datos se realizó con SPSS® versión 26.ResultadosSe incluyeron en el estudio 194 mujeres (n=194), con una mediana de edad de 42 años, la mayoría portuguesas (94,3%) y sin antecedentes de realización de IVE (75,2%). Los métodos anticonceptivos utilizados antes de la IVE fueron la anticoncepción oral (47,0%) y la anticoncepción de barrera (39,1%). El aborto médico se realizó en toda la muestra, con una tasa de éxito del 96,9%. Después de la IVE, la anticoncepción intrauterina (44,3%), la anticoncepción oral (22,7%) y el anillo vaginal (7,2%) fueron los métodos anticonceptivos preferidos.Discusión/conclusionesLos cambios en la salud de las mujeres y las necesidades anticonceptivas motivan nuevos enfoques y estrategias anticonceptivas. Después de la IVE, un porcentaje significativo de mujeres eligió métodos a largo plazo y no dependientes de la usuaria. Particularmente en mujeres de 40 años o más, estos métodos, además de su función anticonceptiva altamente efectiva y segura, pueden traer beneficios adicionales no anticonceptivos, por ejemplo, el efecto terapéutico en el sangrado uterino anormal.(AU)

Crude extract of Jatobá leaves promotes canine osteosarcoma cell D17 proliferation.

Background and Aim: New substances for neoplasm treatment have to be carefully studied to minimize adverse effects and prevent disease progression stimulation. Jatobá is a typical tree of the Cerrado and Caatinga biome, with antifungal, antimicrobial, larvicide, antioxidant, and antiproliferative properties. This study aimed to investigate the action of the crude extract of Jatobá leaves (EBFJ) on canine osteosarcoma (CO) cells and analyze the expression of biomarkers in neoplasm progression. Materials and Methods: D17 cells were cultured and subjected to treatment with EBFJ at different concentrations (10 µg/mL; 100 µg/mL; 1000 µg/mL; 2000 µg/mL; and 5000 µg/mL) and exposure times (24 h, 48 h, and 72 h). The tetrazolium reduction assay and the immunocytochemistry technique, with anti-Bcl2, anti-p53, and anti-Ki-67 antibodies, were used to observe the effect of the extract on cell proliferation. Results: Doses of 2000 µg and 5000 µg had cell viability of 300.80% and 361.84%, respectively. The extract did not show significant cytotoxicity of samples with the control group. The confluence of cells, the number of labeled cells, and the expression of Bcl2, Ki-67, and p53 were higher in the groups treated with EBFJ, with a statistical difference from the group without treatment. Conclusion: EBFJ was not cytotoxic and had a proliferative effect on CO D17 cells. The confluence of cells, the number of labeled cells, and the expression of Bcl2, Ki-67, and p53 were higher in the groups treated with the extract.

Design, metallurgical features, mechanical performance and canal preparation of six reciprocating instruments.

AIM: To compare six reciprocating instruments regarding their geometric design, metallurgical characteristics, mechanical behaviour and ability to prepare root canals. METHODOLOGY: A total of 246 new 25-mm NiTi instruments (41 per group) from six reciprocating systems (Reciproc, Reciproc Blue, One Files, One Files Blue, Reverso Silver, and WaveOne Gold) were evaluated throughout a multimethod approach regarding their design using stereomicroscopy (number of blades and helix angle) and scanning electron microscopy (blades symmetry, cross section and surface finishing), nickel-titanium composition, phase transformation temperatures, mechanical performance (cyclic fatigue, torsional and bending resistance) and unprepared canal surface area on anatomically matched mandibular molars assessed by micro-CT. One-way ANOVA and post hoc Tukey's or Mood's median tests were selected depending on sample distribution with significance level set at 5%. RESULTS: The instruments had similarities regarding their metal composition and unprepared canal area, whilst differences in phase transformation temperatures and geometric design (number of blades, surface finishing and tip geometry) were observed. Overall, no difference was observed regarding the maximum torque values (P > 0.05), whilst One Files (72 s) and One Files Blue (414 s) had the shortest and longest times to fracture, respectively (P < 0.05). Similar angles of rotation were observed in Reciproc (310°), One Files (285°) and Reverso Silver (318°) instruments (P > 0.05), which were significantly lower than Reciproc Blue (492°), One Files Blue (456°) and WaveOne Gold (492°; P < 0.05). Maximum bending load demonstrated that Reciproc Blue (201.3 gf) was significantly more flexible that the other instruments (P < 0.05). CONCLUSION: Although there were similarities in metal composition and percentage of unprepared canal surface, the instruments had differences in the overall geometric design, phase transformation temperatures and in the four mechanical resistance parameters (time to fracture, maximum torque, angle of rotation and maximum bending load).

Bending, buckling and torsional resistance of rotary and reciprocating glide path instruments.

AIM: To evaluate the bending, buckling and torsional resistance of ProGlider (PG) (Dentsply Sirona, Ballaigues, Switzerland), R-Pilot (RP) (VDW, Munich, Germany) and WaveOne Gold Glider (WOGG) (Dentsply Sirona). METHODOLOGY: Ninety instruments were used: 30 PG (size 0.16, .02v taper), 30 RP (size 0.125, .04 taper) and 30 WOGG (size 0.15, .02v taper). The bending resistance test was performed on 10 randomly selected instruments of each system according to ISO 3630-1 specifications. For the buckling resistance test, a loading was applied in the axial direction of each instrument using a universal test machine, with a 20 N cell and 15 mm min-1 speed, in the axial direction. When a lateral elastic displacement of 1 mm occurred, the force was registered. The torsional resistance test was performed according to ISO 3630-1 specifications. Statistical analysis was performed using one-way anova and post hoc Student-Newman-Keuls test (P < 0.05). RESULTS: WOGG had the lowest bending resistance, whilst RP had the highest bending resistance (P < 0.05). RP also had the highest buckling resistance, and WOGG had the lowest (P < 0.05). PG had intermediate results regarding bending and buckling resistance, with significant differences to RP and WOGG (P < 0.05). RP had the highest torsional strength and the lowest angular deflection when compared to PG and WOGG (P < 0.05). No differences in the torsional strength and angular deflection were observed between WOGG and PG (P> 0.05). CONCLUSION: The glide path instruments had different behaviours in term of bending, buckling and torsional resistance.

Overexpression of ALDH1 and EMT marker profile are linked with unfavorable outcome in head and neck cancer.

BACKGROUND: The aim of this research was to assess the expression of aldehyde dehydrogenase 1 (ALDH1) and epithelial-mesenchymal transition (EMT) markers in head and neck squamous cell carcinoma (HNSCC), and to correlate them with the clinical and histopathological parameters of a patient cohort with follow-up over an 8-year period. MATERIAL AND METHODS: For this, seventeen HNSCC and non-neoplastic adjacent epithelium (AE) samples were subjected to laser microdissection and real-time PCR to evaluate the mRNA expression of ALDH1, E-cadherin (E-CAD), N-cadherin (N-CAD), and vimentin (VIM). Also, immunohistochemistry was performed for ALDH1, E-CAD, N-CAD, and VIM in the tumor center (TC), invasion front (IF), and AE of the seventeen samples. Mann-Whitney, Kruskal-Wallis and Chi-square tests were used to correlate the mRNA and immunohistochemical expression with different variables, considering p<0.05. Kaplan-Meier curves were produced for local recurrence, regional metastasis and treatment. RESULTS: A mRNA overexpression of ALDH1 in primary tumors was associated with regional metastasis and a high ALDH1 immunostaining was related to metastasis and a worse patient outcome. Additionally, a favorable outcome was associated with the transition phase and an unfavorable outcome was associated with EMT event. An overall 26.9 months was observed with longer survival associated with surgery and radiotherapy. CONCLUSIONS: However, due to the intense variability inherent to the indicator proteins in the EMT process, the complete profile markers related to this biological process should be continuous investigated.

Living on the edge: the role of Atgolgin-84A at the plant ER-Golgi interface.

The plant Golgi apparatus is responsible for the processing of proteins received from the endoplasmic reticulum (ER) and their distribution to multiple destinations within the cell. Golgi matrix components, such as golgins, have been identified and suggested to function as putative tethering factors to mediate the physical connections between Golgi bodies and the ER network. Golgins are proteins anchored to the Golgi membrane by the C-terminus either through transmembrane domains or interaction with small regulatory GTPases. The golgin N-terminus contains long coiled-coil domains, which consist of a number of α-helices wrapped around each other to form a structure similar to a rope being made from several strands, reaching into the cytoplasm. In animal cells, golgins are also implicated in specific recognition of cargo at the Golgi.Here, we investigate the plant golgin Atgolgin-84A for its subcellular localization and potential role as a tethering factor at the ER-Golgi interface. For this, fluorescent fusions of Atgolgin-84A and an Atgolgin-84A truncation lacking the coiled-coil domains (Atgolgin-84AΔ1-557) were transiently expressed in tobacco leaf epidermal cells and imaged using high-resolution confocal microscopy. We show that Atgolgin-84A localizes to a pre-cis-Golgi compartment that is also labelled by one of the COPII proteins as well as by the tether protein AtCASP. Upon overexpression of Atgolgin-84A or its deletion mutant, transport between the ER and Golgi bodies is impaired and cargo proteins are redirected to the vacuole. LAY DESCRIPTION: The Golgi apparatus is a specialised compartment found in mammalian and plant cells. It is the post office of the cell and packages proteins into small membrane boxes for transport to their destination in the cell. The plant Golgi apparatus consist of many separate Golgi bodies and is responsible for the processing of proteins received from the endoplasmic reticulum (ER) and their distribution to multiple destinations within the cell. Specialised proteins called golgins have been suggested to tether Golgi bodies and the ER. Here we investigate the plant golgin Atgolgin-84A for its exact within the Golgi body and its potential role as a tethering factor at the ER-Golgi interface. For this, we have fused Atgolgin-84A with a fluorescent protein from jellyfish and we are producing this combination in tobacco leaf cells. This allows us to see the protein using laser microscopy. We show that Atgolgin-84A localises to a compartment between the ER and Golgi that is also labelled by the tether protein AtCASP. When Atgolgin-84A is produced in high amounts in the cell, transport between the ER and Golgi bodies is inhibited and proteins are redirected to the vacuole.

Left Hepatic Lobectomy in the Living Donor-Comparison Between Open vs Laparoscopic Surgery.

Laparoscopic hepatic surgery dramatically changed surgical practice in the last decades, improving outcomes in correctly selected patients. The reduction of postoperative pain, lower rate of complication, early return to work activities, and better esthetic result have been well described in several studies. The success of these procedures would inevitably clash in the more complex and delicate field of hepatectomy in the living donor. The 2nd International Consensus of the Conference on Laparoscopic Liver Surgery considers laparoscopic hepatectomy in the donor as an ideal procedure. The aim of this study is to compare the results between conventional and laparoscopic surgery; prospective data and retrospective analysis of 55 cases of live liver donor lobectomy were collected between January 2013 and June 2018. The mean age was 30.4 years in the video laparoscopic technique and 32.1 years in conventional surgery; the majority of donors were male in both groups. The mean time of ischemia was 70.2 minutes (range, 50-120 minutes) in laparoscopic surgery and 80.2 minutes (range, 50-165 minutes) in conventional surgery. The surgical time ranged from 270 to 800 minutes (mean, 452 minutes) in laparoscopic surgery and ranged from 300 to 600 minutes (mean, 424 minutes) in conventional surgery. The mean length of hospital stay was 2.2 days in laparoscopy and 3.97 days in conventional surgery. Laparoscopic left liver lobectomy in the living donor is safe and feasible. There was no significant difference in surgical time; however, the time of hospitalization was lower in patients submitted to laparoscopic technique.

Liver Transplantation for Acute Liver Failure due to Yellow Fever: A Case Report.

Yellow fever is a noncontagious disease caused by an arbovirus in the Flaviviridae family. It is an endemic disease in the tropical forests of Africa and South America, with the mosquito as a vector. Approximately half of those infected will be asymptomatic, while 15% will develop the severe/malignant form of the disease that includes renal and hepatic failure, bleeding, and neurological impairment as the principal symptoms. The lethality of the severe form reaches up to 70%. The objective of this study was to report on the case of a patient who was transferred to the hepatobiliary unit of our service due to acute liver failure due to yellow fever. He was treated with liver transplantation. The patient progressed satisfactorily, being discharged from the intensive care unit in 10 days and discharged from the hospital within 19 days after transplantation. Despite the encouraging result of our team, this has not been applied to other centers that have also performed this modality of treatment; therefore, the question remains as to whether and when to recommend liver transplantation for treatment of severe yellow fever.

Influence of heat treatment on torsional resistance and surface roughness of nickel-titanium instruments.

AIM: To evaluate the influence of controlled memory (CM) thermal treatment on the torsional resistance and surface roughness of nickel-titanium instruments with identical geometric and dimensional characteristics. The influence of environmental temperature on torsional resistance was also evaluated. METHODOLOGY: A sample of 25 conventional NiTi alloy and 25 CM thermal-treated NiTi instruments, with an identical geometric design and a nominal size of 0.25 mm at D0 and a nominal taper of .06 mm mm-1 were selected. The torsional strength and the angle of rotation of the instruments were tested following ISO 3630-1 at two temperatures: 21 and 35 °C. The fracture surfaces of all tested instruments were verified with a scanning electron microscope. The surface roughness of the blades of conventional NiTi alloy and CM wire files was evaluated by using a New View 7100 Profilometer. Statistical analysis was performed using Student's t-test and paired t-test to analyse the torsional resistance and surface roughness at a significance level of P < 0.05. RESULTS: The torsional strength of thermally-treated instruments was significantly lower than nontreated instruments (P < 0.05). However, thermally-treated instruments had significantly greater angular rotation to fracture than nontreated instruments (P < 0.05). Temperature did not influence the torsional strength (P > 0.05) and the angular rotation (P > 0.05) of the instruments. Regarding the roughness measurements, groove depth was lower at the surface of thermally-treated instruments when compared to nontreated instruments (P < 0.05). CONCLUSION: Thermal treatment influenced the torsional resistance and surface roughness of NiTi instruments with identical geometric and dimensional characteristics. Temperature did not affect torsional behaviour.

Monopolar 250-500 Hz language mapping: Results of 41 patients.

OBJECTIVES: To determine whether high-frequency 250-500 Hz monopolar stimulation is effective for mapping cortical and subcortical language structures during brain tumor resection. METHODS: Using high-frequency monopolar stimulation, we mapped the speech areas of 41 awake patients undergoing brain tumor resection in the dominant hemisphere, subject to risk of lesions in the cortical and subcortical speech tracts. Patients were tested for object naming, semantic and other language tasks. RESULTS: Mapping was positive in 22 out of 41 patients. Nine patients presented clinical worsening immediately after surgery. Only one patient did not recover after the 30-day follow-up. Nineteen patients showed negative mapping for language tracts, none of whom exhibited worsening of symptoms at the final evaluation. The applied method showed 89% sensitivity and 56% specificity rates. CONCLUSIONS: The applied method was effective in identifying cortical and subcortical speech areas during the surgical resection of brain tumors. SIGNIFICANCE: Determining whether monopolar high-frequency stimulation is effective for language mapping is important, since it may be very effective in infiltrating tumor areas and nearby edema region.

Torsional fatigue resistance of R-Pilot and WaveOne Gold Glider NiTi glide path reciprocating systems.

AIM: To evaluate the torsional properties of the NiTi glide path reciprocating instruments R-Pilot (VDW, Munich, Germany) and WaveOne Gold Glider (Dentsply Sirona, Ballaigues, Switzerland). METHODOLOGY: Ten R-Pilot (size 12.5, .04 taper) and 10 WaveOne Gold Glider (size 15, .02v taper) instruments were used. The torque and angle of rotation at failure of new instruments (n = 10) were measured according to ISO 3630-1. Three millimetres of each instrument tip was clamped to a small load cell by a lever arm linked to the torsion axis. The fracture surface of all fragments was examined with a scanning electron microscope. Data were analysed using the Student t-test at a significance level of P < 0.05. RESULTS: The maximum torsional strength of the R-Pilot instruments was greater than the WaveOne Gold Glider (P < 0.05). In contrast, WaveOne Gold Glider instruments had significantly higher angular rotation to fracture than R-Pilot instruments (P < 0.05). The scanning electron microscopy of the fracture surfaces revealed similar and typical features of torsional failure (ductile type) for both brands. The torsional failure displayed two zones: the first with microvoids in the centre of the instruments (core) and the second one represented by plastic deformation around the microvoids; this configuration occurred because of the shear stresses originated during the twisting. CONCLUSIONS: R-Pilot instruments had a lower angle of rotation to fracture but a higher torque to failure than WaveOne Gold Glider instruments.

Mechanical characteristics of counterfeit Reciproc instruments: a call for attention.

AIM: To report the main differences seen by direct visual inspection between original and counterfeit Reciproc instruments, together with an evaluation of instrument bending resistance, cyclic fatigue, surface finish, Vickers microhardness and chemical composition. METHODOLOGY: The visual aspects of original Reciproc R25 (VDW, Munich, Germany) and counterfeit Reciproc R25 instruments (claimed to be original, supposedly with dimensions similar to those of Reciproc R25 files, bought at www.mercadolivre.com.br) were evaluated under direct observation, stereomicroscopy and scanning electron microscope. The flexibility of original and counterfeit Reciproc R25 was determined via 45° bending tests according to the ISO 3630-1 specification. Instruments were also subjected to cyclic fatigue resistance, measuring the time to fracture in an artificial stainless steel canal with a 60° angle and 5-mm radius of curvature. The fracture surfaces of all fragments were examined under a scanning electron microscope. Roughness of the instruments was quantified using a profilometer, and the microhardness test was carried out using a Vickers hardness tester. Energy-dispersive X-ray microanalysis (EDX) was also carried out. Results were analysed statistically using the Student's t-test at a significance level of P < 0.05. RESULTS: Although the packaging of the original and counterfeit instruments was similar, a number of differences were observed such as ISO colour coding, measurement marks, stopper and morphologic characteristics. Original Reciproc instruments had significantly longer cyclic fatigue life and significantly lower bending resistance than counterfeit Reciproc instruments (P < 0.05), as well as significantly lower microhardness and roughness (P < 0.05). EDX results revealed differences in the chemical composition of the instruments (P < 0.05), indicating that the instruments were manufactured with different raw material. CONCLUSION: Original Reciproc files outperformed counterfeit instruments in all tests. It is thus important that identification strategies for these counterfeit instruments be developed, thereby preventing their inadvertent use.

Properties of some Hamiltonians describing topologically non-trivial fermionic systems.

We introduce a Hamiltonian for fermions on a lattice and prove a theorem regarding its topological properties. We identify the topological criterion as a [Formula: see text]-topological invariant [Formula: see text] (the Pfaffian polynomial). The topological invariant is not only the first Chern number, but also the sign of the Pfaffian polynomial coming from a notion of duality. Such Hamiltonian can describe non-trivial Chern insulators, single band superconductors or multiorbital superconductors. The topological features of these families are completely determined as a consequence of our theorem. Some specific model examples are explicitly worked out, with the computation of different possible topological invariants.

Ecological Aspects of Phlebotomine Sand Flies (Diptera, Psychodidae, Phlebotominae) in Areas of American Cutaneous Leishmaniasis, in the Municipality of Paraty, Rio de Janeiro, Brazil. I-Index of Abundance by Location and Type of Capture.

The description of the first and autochthonous case of diffuse cutaneous leishmaniasis in the municipality of Paraty, State of Rio de Janeiro, brought the interest of this study. Sand flies were captured over a 3-yr period. Using manual suction tubes, sand flies were collected from the inner and outer walls of homes, in the living spaces of domestic animals, and in Shannon light traps, which were set up outside homes and in the forest. CDC light traps were installed inside homes, around the exterior of the houses, and along the divide and within the forest. A total of 102,937 sand flies were collected, representing 23 species--three from the genus Brumptomyia and 20 from the genus Lutzomyia. Of these, six species, Lutzomyia intermedia, Lutzomyia fischeri, Lutzomyia migonei, Lutzomyia whitmani, and Lutzomyia pessoai have already been recorded as being naturally infected by Leishmania braziliensis, and one species, Lutzomyia ayrozai, by Leishmania naiffi. Lu. intermedia is the vector of Le. braziliensis in the study area, particularly inside the homes and on the exterior of the houses. Lu. fischeri can also act as vector of Le. braziliensis in domestic environments and particularly in the wild. The third-ranked Lu. migonei was the most abundant in kennels, suggesting its canine affinity. Lu. whitmani, ranked fourth, still has characteristics indicative of the wild, but with a significant number located on the edge of the forest, suggesting a selection process of adaptation to the anthropic environment.

Diphtheria outbreak in Maranhão, Brazil: microbiological, clinical and epidemiological aspects.

We describe microbiological, clinical and epidemiological aspects of a diphtheria outbreak that occurred in Maranhão, Brazil. The majority of the 27 confirmed cases occurred in partially (n = 16) or completely (n = 10) immunized children (n = 26). Clinical signs and characteristic symptoms of diphtheria such as cervical lymphadenopathy and pseudomembrane formation were absent in 48% and 7% of the cases, respectively. Complications such as paralysis of lower limbs were observed. Three cases resulted in death, two of them in completely immunized children. Microbiological analysis identified the isolates as Corynebacterium diphtheriae biovar intermedius with a predominant PFGE type. Most of them were toxigenic and some showed a decrease in penicillin G susceptibility. In conclusion, diphtheria remains endemic in Brazil. Health professionals need to be aware of the possibility of atypical cases of C. diphtheriae infection, including pharyngitis without pseudomembrane formation.

Infective endocarditis in Rio de Janeiro, Brazil: a 5-year experience at two teaching hospitals.

INTRODUCTION: Despite the recent advances in diagnosis and treatment, mortality rates due to infective endocarditis (IE) remain high if not aggressively treated with antibiotics, whether or not associated with surgery. Data on the prevalence, epidemiology and etiology of IE from developing countries remain scarce. The aim of this observational, prospective cohort study was to report a 5-year experience of IE at two teaching hospitals in Rio de Janeiro, Brazil. MATERIAL AND METHODS: Demographical, anamnestic and microbiological characteristics of 71 IE patients were evaluated during the period of January 2009 to March 2013. RESULTS: The mean age of the IE patients was 49.8 ± 2.4 years, of which 41 (57.7%) were males. The median time between the onset of symptoms and diagnosis of IE was 35.8 ± 4.8 days. A total of 31 (43.6%) cases of community-acquired infective endocarditis (CAIE) and 40 (56.3%) cases of healthcare-acquired infective endocarditis (HAIE) were observed. Staphylococcus aureus (30%) was the predominant cause of IE. Streptococcus spp. (45.1 %) was the predominant cause of the CAIE while S. aureus (32.5%) and Enterococcus spp. (27.2 %) were the main etiological agents of HAIE. For 64 (90.1 %) patients with native valve endocarditis, the mitral valve was the most commonly affected (48.3%). The main source of IE in this cohort was intravascular catheter. The tricuspid valve and renal chronic insufficiency were more frequent in patients with HAIE than CAIE (p = 0.001). The risk factors associated with in-hospital mortality rate (46.4%) in IE patients were: age over 45 (OR 3.4; 95% CI 1.03-11.24; p = 0.04) and chronic renal insufficiency (OR 38.3; 95% CI 3.2-449.4; p = 0.004). CONCLUSIONS: At two main teaching hospitals in Brazil, Streptococcus spp. was the principal pathogen of CAIE while S. aureus and Enterococcus spp. were the most frequent causes of HAIE. IE remains a serious disease associated with high in-hospital mortality rate (46.6%); especially, in individuals over 45 years of age and with renal failure. Data suggest that early surgery may improve the outcome of IE patients.

Cosmética sustentable: Propuesta de guía para la certificación de cosméticos ecológicos en Venezuela / Sustainable Cosmetic: Guidelines Proposal for Certification of Ecological Cosmetics in Venezuela

Las universidades son centros de producción de conocimiento y de desarrollo científico y tecnológico. Asimismo, una de sus responsabilidades es promover en la sociedad la preservación del medio que nos rodea. Investigadores en el área cosmética de la Universidad Central de Venezuela, preocupados por el medio ambiente y los consumidores, diseñaron una propuesta venezolana como guía para la estandarización y clasificación de los cosméticos ecológicos. Conociendo que las economías de América Latina y del Caribe dependen en su mayoría de la productividad de sus ecosistemas, esta guía contribuirá como una herramienta para el desarrollo sustentable en los países de la región. Para su elaboración, se tomó en consideración la situación actual de estos países. Igualmente, se tomó en cuenta los reglamentos establecidos por los organismos internacionales para la certificación de cosméticos ecológicos más empleados en Latinoamérica. Adicionalmente, se estableció comunicación directa con algunos organismos certificadores y se realizó una revisión bibliográfica de revistas cosméticas de reconocido prestigio. Al comparar los diferentes procedimientos de certificación, se encontraron coincidencias en cuanto al uso de las materias primas permitidas, materiales de empaque y requerimientos para las empresas fabricantes. Sin embargo, se observaron diferencias tanto para la clasificación del producto, basado en el contenido del mismo, así como en los requerimientos exigidos en el texto de la etiqueta. Esta guía podría contribuir con el diseño de una legislación venezolana en materia de productos ecológicos que desarrolle ventajas competitivas en el mercado y que permita alcanzar con éxito el comercio de integración regional.

The universities are centers for knowledge production and scientific and technological development. Therefore, one of their responsibilities is to encourage the society to preserve the environment. Cosmetic researchers at the Universidad Central de Venezuela, aware of the environment as well as the necessities of the consumers, designed a proposal Venezuelan Guide for the Standardization and Classification of Ecologic Cosmetics. Ever since the economies of Latin America and the Caribbean highly depend on the productivity of the ecosystems; this guide will represent a tool for sustainable development for the countries in the region. The guide was elaborated taking into consideration the current situation of those countries. The design of the guide takes into account the rules established by the international bodies on the certification of ecologic cosmetics - mostly used in the Latin American countries-. In addition, direct communications with certifying agencies as well as important cosmetic journals were used. As we compared the different certification procedures used by the agencies, we found consensus in matters of the using of raw materials, packing materials and the requirements for these cosmetic producers. Nevertheless, there was a discrepancy in the classification of ecologic products based on their contents, as well as the information required in the labeling of the products. This guide will help to design a Venezuelan legislation on ecologic cosmetic products that will develop advantages on the market in terms of competition and, at the same time, achieving the access of these products on the regional integration markets.

Study on the postmortem submersion interval and accumulated degree days for a multiple drowning accident.

Recreational accidents in aquatic environments leading to death by drowning are quite frequent. Even if they do not usually require forensic investigation, they may provide useful information on the post mortem submersion interval (PMSI) and its relation with accumulated degree days (ADD). This is particularly useful to forensic science since most studies dealing with these matters rely mostly on animal carcasses as human analogues. In this work we report on a multiple drowning accident resulting in 6 victims. ADD was calculated based on the PMSI and water temperature during this period. PMSI varied between ∼7.4 days and ∼11.4 days, and estimated body drift from the accident site ranged from 0.5km to 8.0km. Surface water temperature in the accident area showed little variation during the PMSI (14.5-16.0°C). Estimated ADD varied between 115°C and 174°C, and between 104°C and 191°C when considering the cumulative lower (ADDmin) and upper (ADDmax) limits for ADD. We compare the results with recently published data on two similar cases, and suggest a range for ADD that can be assumed as necessary before body floatability is regain after a drowning accident.

A case report and literature overview: Abiotrophia defectiva aortic valve endocarditis in developing countries.

A fatal case of aortic valve endocarditis due to Abiotrophia defectiva was reported in Brazil. An overview of cases of endocarditis and other human infections related to A. defectiva in developing countries was also accomplished.

Advances in nanomedicines for malaria treatment.

Malaria is an infectious disease that mainly affects children and pregnant women from tropical countries. The mortality rate of people infected with malaria per year is enormous and became a public health concern. The main factor that has contributed to the success of malaria proliferation is the increased number of drug resistant parasites. To counteract this trend, research has been done in nanotechnology and nanomedicine, for the development of new biocompatible systems capable of incorporating drugs, lowering the resistance progress, contributing for diagnosis, control and treatment of malaria by target delivery. In this review, we discussed the main problems associated with the spread of malaria and the most recent developments in nanomedicine for anti-malarial drug delivery.