Microwave engineered NiZrO3@GNP as efficient electrode material for energy storage applications.

Supercapacitors (SCs) have emerged as attractive energy storage devices due to their rapid charge/discharge rates, long cycle life, and high-power density. However, the development of innovative electrode materials to achieve high-performance remains crucial to meet future requirements in supercapacitor technology. In this work, we have explored the potential of a microwave-engineered NiZrO3@GNP composite as a promising electrode material for SCs. A microwave assisted hydrothermal approach was adopted for the fabrication of the NiZrO3@GNP nanocomposite. Structural and morphological investigations showed its structural richness and its chemical compositions. When applied as a SC electrode, this innovative combination exhibits battery-like behaviour with higher specific capacity (577.63 C g-1) with good cyclic stability, and good performance. We have assembled an asymmetric-type two-electrode SC device and analysed its electrochemical features. This NiZrO3@GNP device exhibits the specific capacity of 47 C g-1 with capacitance retention of 70% after 2000 charge-discharge cycles. Further research on optimizing the synthesis process and exploring different device configurations could pave the way for even higher-performance supercapacitors in the future.

The Anticancer Efficacy of Thiourea-Mediated Reduced Graphene Oxide Nanosheets against Human Colon Cancer Cells (HT-29).

The current research focuses on the fabrication of water-soluble, reduced graphene oxide (rGO) employing thiourea (T) using a simple cost-effective method, and subsequently examining its anticancer characteristics. The cytotoxicity caused by graphene oxide (GO) and T-rGO is investigated in detail. Biological results reveal a concentration-dependent toxicity of GO and T-rGO in human colon cancer cells HT-29. A decrease in cell viability alongside DNA fragmentation is observed. Flow cytometry analysis confirms the cytotoxic effects. The novelty in this work is the use of raw graphite powder, and oxidants such as KMNO4, NaNO3, and 98 percent H2SO4 to produce graphene oxide by a modified Hummers method. This study demonstrates a simple and affordable procedure for utilising thiourea to fabricate a water-soluble reduced graphene oxide, which will be useful in a variety of biomedical applications.

The Cytotoxic Effectiveness of Thiourea-Reduced Graphene Oxide on Human Lung Cancer Cells and Fungi.

This study demonstrated the effective reduction of graphene oxide (GO) by employing thiourea as a reducing and stabilizing agent. Two fungi (Aspergillus flavus and Aspergillus fumigatus) were used for anti-fungal assay. Cell viability, cell cycle analysis, DNA fragmentation, and cell morphology were assessed to determine the toxicity of thiourea-reduced graphene oxide (T-rGO) on human lung cancer cells. The results revealed that GO and T-rGO were hazardous to cells in a dose-dependent trend. The viability of both A. fumigatus and A. flavus was affected by GO and T-rGO. The reactive oxygen species produced by T-rGO caused the death of A. flavus and A. fumigatus cells. This study highlighted the effectiveness of T-rGO as an antifungal agent. In addition, T-rGO was found to be more harmful to cancer cells than GO. Thus, T-rGO manifested great potential in biological and biomedical applications.

Flexible Type Symmetric Supercapacitor Electrode Fabrication Using Phosphoric Acid-Activated Carbon Nanomaterials Derived from Cow Dung for Renewable Energy Applications.

Porous-activated carbon (PAC) materials have been playing a vital role in meeting the challenges of the ever-increasing demand for alternative clean and sustainable energy technologies. In the present scenario, a facile approach is suggested to produce hierarchical PAC at different activation temperatures in the range of 600 to 900 °C by using cow dung (CD) waste as a precursor, and H3PO4 is adopted as the nonconventional activating agent to obtain large surface area values. The as-prepared cow dung-based PAC (CDPAC) is graphitic in nature with mixed micro- and mesoporous textures. High-resolution scanning electron microscopy depicts the morphology of CDPAC as nanoporous structures with a uniform arrangement. High-resolution transmission electron microscopy reveals spherical carbon dense nanoparticles with dense tiny spherical carbon particles. N2 adsorption-desorption isotherms show a very high specific surface area of 2457 m2/g for the CDPAC 9 (CD 9) sample with a large pore volume of 1.965 cm3/g. Electrochemical measurements of the CD 9 sample show a good specific capacitance (C s) of 347 F/g at a lower scan rate (5 mV/s) with improved cyclic stability, which is run up to 5000 cycles at a low current density (0.5 A/g). Hence, we choose an activated carbon prepared at 900 °C to fabricate the modified electrode material. In this regard, a flexible type symmetric supercapacitor device was fabricated, and the electrochemical test results show a supercapacitance value (C s) of 208 F/g.

Electrochemical Studies on Tamarindus indica Fruit Shell Bio-Waste Derived Nanoporous Activated Carbons for Supercapacitor Applications.

Supercapacitors are perfect energy storage devices; they can be charged almost instantly and release energy over a long period. Another advantage of using supercapacitors is their multipletimes chargeable behavior with minimum degradation in performance. Herein, we report the nanoporous activated carbon based modified electrodes prepared by using phosphoric acid (PA) activation method at different temperatures (600, 700, 800, and 900 °C) using bio-waste precursor, Tamarindus indica (T. indica) fruit shell. Because of their excellent energy storage capacity, in the present work, supercapacitive behavior of the nanoporous activated carbon based modified electrode has been demonstrated and hence the electrochemical properties of the developed supercapacitor electrodes are analyzed using cyclic voltammetry, galvanostatic charge-discharge measurements, electrochemical impedance spectroscopy and cycling studies using 1 M KOH as the electrolyte. The developed supercapacitor nanoporous activated carbon materials are characterized by X-ray diffraction, functional group analysis, surface area and morphological studies.

Green Synthesis of Co3O4 Nanorods for Highly Efficient Catalytic, Photocatalytic, and Antibacterial Activities.

Cobalt oxide nanorods were successfully synthesized by a hot plate combustion method using the plant extract of Vitis vinifera. The plant extract as an alternative to toxic chemicals can be used generally as reducing and capping agents. The obtained nanorods were characterized by XRD, FT-IR, Raman, TEM, SAED, EDX, DRS, PL and VSM techniques for the structural, morphological, optical and magnetic properties. The XRD, FT-IR, Raman, EDX analysis confirmed the high purity of the sample. The TEM and SAED results showed the rod shape morphology of the sample. DRS and PL showed the band gap energy and emission at visible region. VSM showed the antiferromagnetic nature of the sample. The photocatalytic activities of the as-prepared cobalt oxide nanorods were investigated for the degradation of textile dying waste water. As per the standards of Indian pollution control board for industrial waste water let out into river bodies, the degradation reactions of waste water was found to be 250 mg/L at 150 min. Also, the same catalyst is used for the reduction of 4-nitrophenol and 4-nitroaniline using sodium borohydride as a reducing agent and it exhibits excellent reduction reaction, because of the high active surface sites. The time taken for the reduction reaction was 300 sec and 210 sec for 4-nitrophenol and 4-nitroaniline respectively. Also, the antibacterial activities towards the bacterial strains were studied and reported.

Correction to 'Investigation on preferably oriented abnormal growth of CdSe nanorods along (0002) plane synthesized by henna leaf extract-mediated green synthesis'.

[This corrects the article DOI: 10.1098/rsos.171430.].

Liquid Phase Catalytic Oxidation of Toluene Over Rich Silica and Alumina Composition of Hierarchical Ordered ZSM-5 Zeolites Prepared Without Organic Templates.

Hierarchical ordered ZSM-5 zeolites were successfully synthesized by a template-free hydrothermal treatment using rice joints ash as the source of silica. The formation of hierarchical ordered ZSM-5 zeolites and its physicochemical properties were investigated systematically. The mineralogical phases, morphology, surface area and porosity, acidity and thermal stability of the synthesized hierarchical materials were investigated using XRD, FT-IR, HR-SEM, N2 adsorption-desorption (BET) analysis, NH3-TPD and TGA/DTA analysis. The excellent catalytic activity of hierarchical ordered ZSM-5 zeolites (150 °C) was revealed in the selective oxidation of toluene to the corresponding benzaldehyde with 82% conversion and 94% selectivity. The material was evaluated for the oxidation of toluene in the presence of H2O2 as the oxidizing agent and 1,4-dioxane solvent. The obtained results noted that the material was highly active, stable and can be recycled at least four times without a loss of catalytic efficiency. The crystallization was carried out in an autoclave for 5 days maintained at a temperature of 150 °C for the transformation of RJA into hierarchical ZSM-5 zeolite structure as well as to achieve high crystallinity.

Green synthesis of Ag nanoparticles using Tamarind fruit extract for the antibacterial studies.

In the present study, first time we report the microwave-assisted green synthesis of silver nanoparticles (AgNPs) using Tamarindus indica natural fruit extract. The plant extract plays a dual role of reducing and capping agent for the synthesis of AgNPs. The formation of spherical shape AgNPs is confirmed by XRD, HR-SEM, and HR-TEM. The presence of face-centered cubic (FCC) silver is confirmed by XRD studies and the average crystallite size of AgNPs is calculated to be around 6-8nm. The average particle diameter is found to be around 10nm, which is identified from HR-TEM images. The purity of AgNPs is confirmed by EDX analysis. The presence of sigmoid curve in UV-Visible absorption spectra suggests that the reaction has complicated kinetic features. To investigate the functional groups of the extract and their involvement in the reduction of AgNO3 to form AgNPs, FT-IR studies are carried out. The redox peaks are observed in cyclic voltammetry in the potential range of -1.2 to +1.2V, due to the redox active components of the T. indica fruit extract. In photoluminescence spectroscopy, the excited and emission peaks were obtained at 432nm and 487nm, respectively. The as-prepared AgNPs showed good results towards antibacterial activities. Hence, the present approach is a facile, cost- effective, reproducible, eco-friendly, and green method.

Green synthesis of NiO nanoparticles using Moringa oleifera extract and their biomedical applications: Cytotoxicity effect of nanoparticles against HT-29 cancer cells.

Green protocols for the synthesis of nickel oxide nanoparticles using Moringa oleifera plant extract has been reported in the present study as they are cost effective and ecofriendly, moreover this paper records that the nickel oxide (NiO) nanoparticles prepared from green method shows better cytotoxicity and antibacterial activity. The NiO nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), High resolution transmission electron microscopy (HRTEM), Energy dispersive X-ray analysis (EDX), and Photoluminescence spectroscopy (PL). The formation of a pure nickel oxide phase was confirmed by XRD and FTIR. The synthesized NiO nanoparticles was single crystalline having face centered cubic phase and has two intense photoluminescence emissions at 305.46nm and 410nm. The formation of nano- and micro-structures was confirmed by HRTEM. The in-vitro cytotoxicity and cell viability of human cancer cell HT-29 (Colon Carcinoma cell lines) and antibacterial studies against various bacterial strains were studied with various concentrations of nickel oxide nanoparticles prepared from Moringa oleifera plant extract. MTT assay measurements on cell viability and morphological studies proved that the synthesized NiO nanoparticles posses cytotoxic activity against human cancer cells and the various zones of inhibition (mm), obtained revealed the effective antibacterial activity of NiO nanoparticles against various Gram positive and Gram negative bacterial pathogens.

Studies on the efficient dual performance of Mn1-xNixFe2O4 spinel nanoparticles in photodegradation and antibacterial activity.

The present work describes the successful synthesize of spinel magnetic ferrite Mn1-xNixFe2O4 (x=0.0, 0.1, 0.2, 0.3, 0.4 & 0.5) nanoparticles via a simple microwave combustion method which was then evaluated for its photocatalytic activity in the degradation of indigo carmine (IC) synthetic dye, a major water pollutant. Our results reveal that the synthesized of Ni2+ doped MnFe2O4 nanoparticles possess well-crystalline pure cubic spinel phase, exhibit excellent optical and magnetic properties. Further, the photocatalytic performance of the synthesized nanoparticles at different concentration ratios of Ni2+ ions was monitored by photocatalytic degradation of indigo carmine synthetic dye under UV (λ=365nm) light irradiation. In order to get maximum photocatalytic degradation (PCD) efficiency, we have optimized various parameters, which include catalyst dosage, initial dye concentration, pH and Ni2+ dopant content. It was found that the reaction was facilitated with optimum catalyst dose of 50mg/100mL, high dye concentrations of 150mg/L and acidic pH and among all the synthesized samples, Mn0·5Ni0.5Fe2O4 exhibit superior performance of photocatalytic activity on the degradation of indigo carmine synthetic dye. These results highlighted the potential use of effective, low-cost and easily available photocatalysts for the promotion of wastewater treatment and environmental remediation. In addition, the antibacterial activity of spinel magnetic Mn1-xNixFe2O4 nanoparticles against two Gram positive bacteria (Staphylococcus aureus and Bacillus subtilis) and two Gram negative bacteria (Pseudomonas aeruginosa and Escherichia coli) was also examined. Our antibacterial activity results are comparable with the results obtained using the antibiotic, streptomycin.

Photocatalytic activity of binary metal oxide nanocomposites of CeO2/CdO nanospheres: Investigation of optical and antimicrobial activity.

We report the synthesis of high quality CeO2-CdO binary metal oxide nanocomposites were synthesized by a simple chemical precipitation and hydrothermal method. Cerium nitrate and cadmium nitrate were used as precursors. Composition, structure and morphology of the nanocomposites were analyzed by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). XRD pattern proves that the final product has cubic phase and the particle size diameter of the nanocomposites are 27nm, XRD results also indicated that the crystalline properties of the nanocomposite were improved without affecting the parent lattice, FESEM analysis indicates that the product is composed of spherical particles in clusters. The morphological and optical properties of CeO2-CdO nanosamples were characterized by HRTEM and DRS spectroscopy. The IR results showed high purity of products and indicated that the nanocomposites are made up of CeO2 and CdO bonds. Absorption spectra exhibited an upward shift in characteristic peaks caused by the addition of transition metal oxide, suggesting that crystallinity of both the metal oxide is improved due to specific doping level. TGA plots further confirmed the purity and stability of nanomaterials prepared. Hence the nanocomposite has cubic crystal lattice and form a homogeneous solid structure. From the result, Cd(2+) ions are embedded in the cubic crystal lattice of ceria. The growth rate increases which are ascribed to the cationic doping with a lower valence cation. Ce-Cd binary metal oxide nanocomposites showed antibacterial activity, it showed the better growth inhibition towards p.aeruginosa. Exploit of photodegradation and photocatalytic activity of large scale synthesis of CeO2-CdO binary metal oxide nanocomposites was reported.

Preparation and characterization of hierarchical porous carbons derived from solid leather waste for supercapacitor applications.

Utilization of crust leather waste (CLW) as precursors for the preparation of hierarchical porous carbons (HPC) were investigated. HPCs were prepared from CLW by pre-carbonization followed by chemical activation using KOH at relatively high temperatures. Textural properties of HPC's showed an extent of micro-and mesoporosity with maximum BET surface area of 716m(2)/g. Inducements of graphitic planes in leather waste derived carbons were observed from X-ray diffraction and HR-TEM analysis. Microstructure, thermal behavior and surface functional groups were identified using FT-Raman, thermo gravimetric analysis and FT-IR techniques. HPCs were evaluated for electrochemical properties by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD) and electrochemical impedance spectroscopy (EIS) by three electrode system. CLC9 sample showed a maximum capacitance of 1960F/g in 1M KCl electrolyte. Results achieved from rectangular curves of CV, GCD symmetric curves and Nyquist plots show that the leather waste carbon is suitable to fabricate supercapacitors as it possess high specific capacitance and electrochemical cycle stability. The present study proposes an effective method for solid waste management in leather industry by the way of converting toxic leather waste to new graphitic porous carbonaceous materials as a potential candidate for energy storage devices.

Influence of Fe-Doping on the Structural, Morphological, Optical, Magnetic and Antibacterial Effect of ZnO Nanostructures.

Pure and Fe-doped ZnO nanostructures with different weight ratios (0.5, 1.0, 1.5, and 2.0 at wt% of Fe) were successfully synthesized by a facile microwave combustion method using urea as a fuel. The detailed structural characterization was performed by means of X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), energy dispersive X-ray analysis (EDX), diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy and vibrating sample magnetometry (VSM). XRD patterns refined by the Rietveld method indicated that Fe-doped ZnO have a single pure phase with wurtzite structure, suggesting that Fe ions are successfully incorporated into ZnO crystal lattice by occupying Zn ionic sites. Interestingly, the morphology was found to change substantially from grains to nanoflakes and then into nanorods with the variation of Fe-content. The optical band gap estimated using DRS was found to be red-shifted from 3.220 eV for the pure ZnO nanostructures, then decreases up to 3.200 eV with increasing Fe-content. Magnetic studies showed that Fe-doped ZnO nanostructures exhibit room temperature ferromagnetism (RTFM) and the saturation magnetization attained a maximum value of 8.154 x 10(-3) emu/g for the highest Fe-content. The antibacterial activity of pure and Fe-doped ZnO nanostructures against a Gram-positive bacteria and Gram-negative bacteria was investigated. Pure ZnO and Fe-doped ZnO exhibited antibacterial activity, but it was considerably more effective in the 1.5 wt% Fe-doped ZnO nanostructures.

Structural, Optical and Magnetic Properties of Ni-Zn Ferrite Nanoparticles Prepared by a Microwave Assisted Combustion Method.

Ni-doped ZnFe2O4(Ni(x)Zn1₋xFe2O4; x = 0.0 to 0.5) nanoparticles were synthesized by a simple microwave combustion method. The X-ray diffraction confirms the presence of cubic spinel ZnFe2O4for all compositions. The lattice parameter decreases with an increase in Ni content resulting in the reduction of lattice strain. High resolution scanning electron microscope images revealed that the as-prepared samples are crystalline with particle size distribution in 40-50 nm range. Optical properties were determined by UV-Visible diffuse reflectance and photoluminescence spectroscopy respectively. The saturation magnetization (Ms) shows the super paramagnetic nature of the sample for x = 0.0-0.2, whereas for x = 0.3-0.5, it shows ferromagnetic nature. The Ms value is 1.638 emu/g for pure ZnFe2O4 sample and it increases with increase in Ni content.

Microwave Based Synthesis; Structural, Optical and Magnetic Measurements of Co²âº Doped MnFe2O4.

CO²âº doped manganese ferrite (Mn1₋xCoxFe2O4, x = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5) samples were synthesized by a microwave combustion method. Nitrates of the constituent elements and urea were respectively used as the oxidizer and fuel to drive the reaction. On an average a yield of 80% were obtained for all the compositions. Light-absorbing properties from UV-Vis diffuse reflection spectrum were studied and the results infer that the band gap energy (Eg) of the pure MnFe2O4 is 1.76 eV and with increase in C02+ ion concentration, it increases to 2.25 eV. The phase purity and crystal lattice symmetry were estimated from X-ray diffraction (XRD) and was identified as the spinel cubic crystal structure. The lattice parameter is found to decrease with an increase in Co content. The crystallite size was in the range of 19-25 nm. The purity and the composition of the elements were further confirmed by energy dispersive X-ray (EDX) results. Microstructural features obtained by scanning electron microscope (SEM) demonstrate that the nanocrystals were formed with a decrease in average grain size with C02+ content. Room temperature magnetic measurement for stoichiometric samples is discussed with the help of vibrating sample magnetometer (VSM). The saturation magnetization (M), remanant magnetization (Mr) and coercivity (H.) are measured from the respective hysteresis plots.

Synthesis and Characterization of Cobalt Substituted Zinc Ferrite Nanoparticles by Microwave Combustion Method.

Pure and cobalt doped zinc ferrites were prepared by microwave combustion method using L-arginine as a fuel. The prepared samples were characterized by various instrumental techniques such as X-ray powder diffractometry, high resolution scanning electron microscopy (HR-SEM), energy dispersive X-ray analysis, Fourier transformed infrared (FT-IR) spectroscopy, photoluminescence spectroscopy and UV-Visible diffuse reflectance spectroscopy. Vibrating sample magnetometry at room temperature was recorded to study the magnetic behavior of the samples. X-ray analysis confirmed the formation of zinc ferrites normal spinel-type structure with an average crystallite sizes in the range, 25.69 nm to 35.68 nm. The lattice parameters decreased as cobalt fraction was increased. The HR-SEM images showed nanoparticles are agglomerated. The estimated band gap energy value was found to decrease with an increase in cobalt content (1.87 to 1.62 eV). Broad visible emissions are observed in the photoluminescence spectra. A gradual increase in the coercivity and saturation magnetization (M(s)) were noted at relatively higher cobalt doping fractions.

Comparative Investigation on the Photocatalytic Degradation of 2,4,6-Trichlorophenol Using Pure and M-Doped (M = Ba, Ce, Mg) ZnO Spherical Nanoparticles.

Pure and M-doped (Ba, Ce, Mg) ZnO spherical nanoparticles are synthesized by a simple low temperature co-precipitation method, and were characterized by X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), and high resolution transmission electron microscopy (HR-TEM). The XRD results showed the formation of single phase ZnO with wurtzite crystal structure and the electron microscopic studies supported the validity for the formation of pure and M-doped (Ba, Ce, Mg) ZnO spherical nanoparticles. Photocatalytic degradation (PCD) of 2,4,6-trichlorophenol, a potent endocrine disrupting chemical in aqueous medium was investigated by both pure and M-doped (Ba, Ce, Mg) ZnO spherical nanoparticles under UV-light irradiation. The influence of the metal dopants on the structure and photocatalytic (PC) activity of ZnO was investigated systematically. Furthermore, the effect of different parameters such as 2,4,6-trichlorophenol concentration, photocatalyst amount, pH and dopant wt% on the resulting PC activity was investigated. The kinetics of the photocatalytic degradation of 2,4,6-trichlorophenol was found to follow the pseudo-first order reaction, and it was established that Ba-doped ZnO is photocatalytically more active than the other photocatalysts.

Microwave combustion synthesis of Co1-xZnxFe2O4 (0⩽x⩽0.5): Structural, magnetic, optical and vibrational spectroscopic studies.

Nanostructured pure and zinc doped cobalt ferrites (Co1-xZnxFe2O4 where x fraction ranging from 0 to 0.5) were prepared by microwave combustion method employing urea as a fuel. The nanostructured samples were characterized by using various instrumental techniques such as X-ray powder diffractometry, high resolution scanning electron microscopy, energy dispersive X-ray analysis, UV-visible diffuse reflectance spectroscopy, photoluminescence spectroscopy and Fourier transformed infrared (FT-IR) spectroscopy. Vibrating sample magnetometry at room temperature was recorded to study the magnetic behavior of the samples. X-ray analysis and the FT-IR spectroscopy revealed the formation of cobalt ferrite cubic spinel-type structure. The average crystallite sizes for the samples were in the range of 3.07-11.30 nm. The direct band gap (Eg) was estimated using Kubelka-Munk method and is obtained from the UV-vis spectra. The band gap value decreased with an increase in zinc fraction (2.56-2.17 eV). The violet and green emission observed in the photoluminescence spectra revealed that cobalt ferrites are governed by defect controlled processes. The elemental analysis of zinc doped cobalt ferrites were obtained from energy dispersive X-ray (EDX) analysis. From the magnetic measurements, it is observed that cobalt ferrite and zinc doped cobalt ferrite systems fall under the soft ferrite category. The saturation magnetization (Ms) value of undoped cobalt ferrite is 14.26 emu/g, and it has reached a maximum of 29.61 emu/g for Co0.7Zn0.3Fe2O4.

Effect of Ce doping on structural, optical and photocatalytic properties of ZnO nano-structures.

A novel self-assembled pure and Ce doped ZnO nano-particles (NPs) were successfully synthesized by a simple low temperature co-precipitation method. The prepared photocatalysts were characterized by X-ray diffraction (XRD), High resolution scanning electron microscopy (HR-SEM), High resolution transmission electron microscopy (HR-TEM), diffuse reflectance spectroscopy (DRS) and Photoluminescence (PL) spectroscopy. The results indicated that the prepared photocatalysts shows a novel morphology, high crystallinity, uniform size distribution, and more defects. Photocatalytic degradation (PCD) of nonylphenol, a potent endocrine disrupting chemical in aqueous medium was investigated. Higher amount of oxygen defects exhibits enhanced PCD of nonylphenol. In addition, the influence of the Ce contents on the structure, morphology, absorption, emission and photocatalytic activity of ZnO nanoparticles (NPs) were investigated systematically. The relative PCD efficiency of pure ZnO, Ce-doped ZnO NPs and commercial TiO2 (Degussa P-25) have also been discussed.