RESUMEN
Hydrogen (H2) generation by electrochemical water splitting is a key technique for sustainable energy applications. Two-dimensional (2D) transition-metal dichalcogenide (MoS2) and silver phosphate (Ag3PO4) possess excellent electrochemical hydrogen evolution reaction (HER) properties when they are combined together as a composite rather than individuals. Reports examining the HER activity by using Ag3PO4, especially, in combination with the 2D layered MoS2 are limited in literature. The weight fraction of MoS2 in Ag3PO4 is optimized for 1, 3, and 5 wt%. The Ag3PO4/1 wt % MoS2 combination exhibits enhanced HER activity with least overpotential of 235 mV among the other samples in the acidic medium. The synergistic effect of optimal nano-scale 2D layered MoS2 structure and Ag3PO4 is essential for creating higher electrochemical active surface area of 217 mF/cm2, and hence this leads to faster reaction kinetics in the HER. This work suggests the advantages of Ag3PO4/1 wt % MoS2 heterogeneous composite catalyst for electrochemical analysis and HER indicating lower resistivity and low Tafel slope value (179 mV/dec) among the prepared catalysts making it a promising candidate for its use in practical energy applications.
Asunto(s)
Molibdeno , Nanoestructuras , Humanos , Hidrógeno , Cinética , FísicaRESUMEN
The current study highlights the successful integration of an in silico design with experimental validation to create a highly effective corrosion inhibitor for copper (Cu) surfaces. The synthesized sulfonated zinc phthalocyanine (Zn-Pc) is electrochemically characterized and demonstrates an impressive 97% inhibition efficiency, comparable to the widely used industrial corrosion inhibitor, BTA, for Cu surfaces. The corrosion inhibition is comprehensively analyzed through potentiodynamic polarization and impedance spectroscopy techniques, supported by their respective equivalent circuits. Furthermore, the sample undergoes thorough characterization using scanning electron microscopy, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, contact angle measurements, and atomic force microscopy. Density functional theory calculations reveal that sulfonated Zn-Pc exhibits the highest interaction energy, underscoring its exceptional inhibition properties. These results open possibilities for utilizing computational methods to design and optimize corrosion inhibitors for protection of Cu surfaces.
RESUMEN
The difference in resistive switching characteristics by modifying the device configuration provides a unique operating principle, which is essential for both fundamental studies and the development of future memory devices. Here, we demonstrate the poly(methyl methacrylate) (PMMA)-based resistive switching characteristics using four different combinations of electrode/electrolyte arrangement in the device geometry. From the current-voltage (I-V) measurements, all the PMMA-based devices revealed nonvolatile memory behavior with a higher ON/OFF resistance ratio (â¼105-107). Significantly, the current conduction in the filament and resistive switching behavior depend majorly on the presence of Al electrode and electrochemically active silver (Ag) element in the PMMA matrix. A trap-controlled space charge limited conduction (SCLC) mechanism constitutes the resistive switching in the Al/PMMA/Al device, whereas the current conduction governed by ohmic behavior influences the resistive switching in the Ag-including devices. The depth-profiling X-ray photoelectron spectroscopy (XPS) study evidences the conducting filament formation processes in the PMMA-based devices. These results with different conduction mechanisms provide further insights into the understanding of the resistive switching behavior in the polymer-based devices by simply rearranging the device configuration.
RESUMEN
The detailed understanding and control of ionic transport pathways in the electrode/electrolyte interface is vital for realizing micro-scale energy storage devices and formulating adequate design principles. A planar device geometry with nanostructured thin solid polymer electrolyte (SPE) and potassium hydroxide (KOH) incorporated poly(N-vinyl imidazole) (PVI) is demonstrated for micro-supercapacitors (MSCs). The adsorption/desorption kinetics of ionic charges in the interfacial regime of ITO/PVI-KOH has been investigated for electrical double layer capacitance (EDLC) characteristics. A single-cell of ITO/PVI-KOH/ITO planar MSC shows the large variation in volumetric capacitance and capacitance retention characteristics when the thickness of PVI-KOH approaches the characteristic nanoscale. Moreover, ITO/PVI-KOH/ITO planar MSC consisting of five series-cells exhibits the maximum operating cell voltage of 5.0 V with maximum volumetric energy and power density of 0.056 mW h cm-3 and 6.89 mW cm-3, respectively. The electrochemical properties of planar MSC have been systematically studied so as to confirm how the anions and cations are separated at electrode/electrolyte interfaces by means of an electromotive force. Significantly, the hydrated PVI enables charge migration and separation of cations and anions at the electrode/electrolyte interfaces.
RESUMEN
We report a low-temperature scanning tunneling microscopy investigation of the in-situ growth of gadolinium phthalocyaninato complexes by combined deposition of free-base phthalocyanines and gadolinium atoms on a smooth Ag(111) substrate. A careful control of the stoichiometry allows the expression of a multilevel structurecomposed of irregularly distributed Gdx-1 (Pc)x complexes, x=2-5, thus paving new avenues for surface-confined columnar growth.
RESUMEN
Interfacial modification of the photoanode|electrolyte interface using oleic acid (OA) is thoroughly investigated in this present study. The overall photoconversion efficiency of 11.8% was achieved under the illumination of 100 mW cm-2 with an optical filter of AM 1.5 G. OA molecules were meant to be adsorbed on to the vacant areas of the TiO2 and the OA moieties leached out the aggregated C106 dye molecules from the TiO2 surface. There was a strong spectral overlap between the absorption spectrum of donor (OA) and the emission spectrum of acceptor (C106), leading to effective Förster Resonance Energy Transfer (FRET) between OA and C106 and suggested an excellent opportunity to improve the photovoltaic performances of DSSCs. UV-vis DRS and UPS analysis revealed that OA molecules created new surface (mid-gap energy) states (SS) in TiO2 and these SS played a major role in the electron transport kinetics. Mott-Schottky analysis of DSSCs under dark conditions was carried out to find the shift in the flat band potential of TiO2 upon OA modification. Surprisingly, no trade off between V OC and J SC was observed after interfacial modification with OA. The dynamics of charge recombination and electron transport at the photoanode|electrolyte interface were studied in detail using electrochemical impedance spectroscopy.
RESUMEN
Self-assembled organic molecules can potentially be an excellent source of charge and spin for two-dimensional (2D) atomic-layer superconductors. Here we investigate 2D heterostructures based on In atomic layers epitaxially grown on Si and highly ordered metal-phthalocyanine (MPc, M = Mn, Cu) through a variety of techniques: scanning tunneling microscopy, electron transport measurements, angle-resolved photoemission spectroscopy, X-ray magnetic circular dichroism, and ab initio calculations. We demonstrate that the superconducting transition temperature (Tc) of the heterostructures can be modified in a controllable manner. Particularly, the substitution of the coordinated metal atoms from Mn to Cu is found to reverse the Tc shift from negative to positive directions. This distinctive behavior is attributed to a competition of charge and spin effects, the latter of which is governed by the directionality of the relevant d-orbitals. The present study shows the effectiveness of molecule-induced surface doping and the significance of microscopic understanding of the molecular states in these 2D heterostructures.
RESUMEN
Selectivity in chemical reactions is a major objective in industrial processes to minimize spurious byproducts and to save scarce resources. In homogeneous catalysis the most important factor which determines selectivity is structural symmetry. However, a transfer of the symmetry concept to heterogeneous catalysis still requires a detailed comprehension of the underlying processes. Here, we investigate a ring-closing reaction in surface-confined meso-substituted porphyrin molecules by scanning tunneling microscopy, temperature-programmed desorption, and computational modeling. The identification of reaction intermediates enables us to analyze the reaction pathway and to conclude that the symmetry of the porphyrin core is of pivotal importance regarding product yields.
RESUMEN
Surface-supported molecular motors are nanomechanical devices of particular interest in terms of future nanoscale applications. However, the molecular motors realized so far consist of covalently bonded groups that cannot be reconfigured without undergoing a chemical reaction. Here we demonstrate that a platinum-porphyrin-based supramolecularly assembled dimer supported on a Au(111) surface can be rotated with high directionality using the tunneling current of a scanning tunneling microscope (STM). Rotational direction of this molecular motor is determined solely by the surface chirality of the dimer, and most importantly, the chirality can be inverted in situ through a process involving an intradimer rearrangement. Our result opens the way for the construction of complex molecular machines on a surface to mimic at a smaller scale versatile biological supramolecular motors.
RESUMEN
Magnetochemistry recently emerged as a promising approach to control addressable spin arrays on surfaces. Here we report on the binding, spatial ordering, and magnetic properties of Fe on a highly regular Co-tetraphenylporphyrin (Co-TPP) template and highlight how the Fe controls the magnetism of the Co centers. As evidenced by scanning tunneling microscopy (STM) single Fe atoms attach to the saddle-shape conformers site-selectively in a unique coordination environment offered through a heptamer defined by the Co-N-C-C-C-N cyclic subunit. While the magnetic moment of Co is quenched for bare Co-TPP/Ag(111), the Fe presence revives it. Our X-ray magnetic circular dichroism (XMCD) experiments, complemented by density functional theory (DFT) calculations, evidence a ferromagnetic coupling between the Fe and the Co center concomitant with a complex charge redistribution involving the porphyrin ligand. Thus, we demonstrate an unusual metalloporphyrin coordination geometry that opens pathways to spatially order and engineer magnetic moments in surface-based nanostructures.
RESUMEN
We report on the construction of well-defined surface quantum well arrangements by combining self-assembly protocols and molecular manipulation procedures. After the controlled removal of individual porphyrin molecules from dense-packed arrays on Ag(111), the surface state electrons are confined at the bare silver patches. These act as quantum wells that show well-defined unoccupied bound surface states. Scanning tunneling spectroscopy and complementary boundary element method calculations are performed to characterize the interaction between the bound states of adjacent quantum wells and reveal a hybridization of wave functions resulting in bonding and antibonding states. The interwell coupling can be tuned by the deliberate choice of the molecules acting as potential barriers. The fabrication method is shown to be ideally suited to engineer specific configurations as one-dimensional chains or two-dimensional artificial molecules.
Asunto(s)
Electrones , Plata/química , Propiedades de Superficie , Electrónica , Microscopía de Túnel de Rastreo , Análisis EspectralRESUMEN
The formation of 2D surface-confined supramolecular porous networks is scientifically and technologically appealing, notably for hosting guest species and confinement phenomena. In this study, we report a scanning tunneling microscopy (STM) study of the self-assembly of a tripod molecule specifically equipped with pyridyl functional groups to steer a simultaneous expression of lateral pyridyl-pyridyl interactions and Cu-pyridyl coordination bonds. The assembly protocols yield a new class of porous open assemblies, the formation of which is driven by multiple interactions. The tripod forms a purely porous organic network on Ag(111), phase α, in which the presence of the pyridyl groups is crucial for porosity, as confirmed by molecular dynamics and Monte Carlo simulations. Additional deposition of Cu dramatically alters this scenario. For submonolayer coverage, three different porous phases coexist (i.e., ß, γ, and δ). Phases ß and γ are chiral and exhibit a simultaneous expression of lateral pyridyl-pyridyl interactions and twofold Cu-pyridyl linkages, whereas phase δ is just stabilized by twofold Cu-pyridyl bonds. An increase in the lateral molecular coverage results in a rise in molecular pressure, which leads to the formation of a new porous phase (ε), only coexisting with phase α and stabilized by a simultaneous expression of lateral pyridyl-pyridyl interactions and threefold Cu-pyridyl bonds. Our results will open new avenues to create complex porous networks on surfaces by exploiting components specifically designed for molecular recognition through multiple interactions.
Asunto(s)
Compuestos Macrocíclicos/química , Metales/química , Compuestos Organometálicos/química , Piridinas/química , Cobre/química , Enlace de Hidrógeno , Microscopía de Túnel de Rastreo , Modelos Moleculares , Nanoestructuras/química , PorosidadRESUMEN
The fabrication and control of coordination compounds or architectures at well-defined interfaces is a thriving research domain with promise for various research areas, including single-site catalysis, molecular magnetism, light-harvesting, and molecular rotors and machines. To date, such systems have been realized either by grafting or depositing prefabricated metal-organic complexes or by protocols combining molecular linkers and single metal atoms at the interface. Here we report a different pathway employing metal-organic chemical vapor deposition, as exemplified by the reaction of meso-tetraphenylporphyrin derivatives on atomistically clean Ag(111) with a metal carbonyl precursor (Ru3(CO)12) under vacuum conditions. Scanning tunneling microscopy and X-ray spectroscopy reveal the formation of a meso-tetraphenylporphyrin cyclodehydrogenation product that readily undergoes metalation after exposure to the Ru-carbonyl precursor vapor and thermal treatment. The self-terminating porphyrin metalation protocol proceeds without additional surface-bound byproducts, yielding a single and thermally robust layer of Ru metalloporphyrins. The introduced fabrication scheme presents a new approach toward the realization of complex metal-organic interfaces incorporating metal centers in unique coordination environments.
RESUMEN
The tessellation of the Euclidean plane by regular polygons has been contemplated since ancient times and presents intriguing aspects embracing mathematics, art, and crystallography. Significant efforts were devoted to engineer specific 2D interfacial tessellations at the molecular level, but periodic patterns with distinct five-vertex motifs remained elusive. Here, we report a direct scanning tunneling microscopy investigation on the cerium-directed assembly of linear polyphenyl molecular linkers with terminal carbonitrile groups on a smooth Ag(111) noble-metal surface. We demonstrate the spontaneous formation of fivefold Ce-ligand coordination motifs, which are planar and flexible, such that vertices connecting simultaneously trigonal and square polygons can be expressed. By tuning the concentration and the stoichiometric ratio of rare-earth metal centers to ligands, a hierarchic assembly with dodecameric units and a surface-confined metal-organic coordination network yielding the semiregular Archimedean snub square tiling could be fabricated.
Asunto(s)
Cerio/química , Elementos de la Serie de los Lantanoides/química , Modelos Químicos , Nanopartículas/química , Polifenoles/química , Microscopía de Túnel de Rastreo , Nitrilos/química , Propiedades de SuperficieRESUMEN
We investigated the surface bonding and ordering of free-base porphine (2H-P), the parent compound of all porphyrins, on a smooth noble metal support. Our multitechnique investigation reveals a surprisingly rich and complex behavior, including intramolecular proton switching, repulsive intermolecular interactions, and density-driven phase transformations. For small concentrations, molecular-level observations using low-temperature scanning tunneling microscopy clearly show the operation of repulsive interactions between 2H-P molecules in direct contact with the employed Ag(111) surface, preventing the formation of islands. An increase of the molecular coverage results in a continuous decrease of the average intermolecular distance, correlated with multiple phase transformations: the system evolves from an isotropic, gas-like configuration via a fluid-like phase to a crystalline structure, which finally gives way to a disordered layer. Herein, considerable site-specific molecule-substrate interactions, favoring an exclusive adsorption on bridge positions of the Ag(111) lattice, play an important role. Accordingly, the 2D assembly of 2H-P/Ag(111) layers is dictated by the balance between adsorption energy maximization while retaining a single adsorption site counteracted by the repulsive molecule-molecule interactions. The long-range repulsion is associated with a charge redistribution at the 2H-P/Ag(111) interface comprising a partial filling of the lowest unoccupied molecular orbital, resulting in long-range electrostatic interactions between the adsorbates. Indeed, 2H-P molecules in the second layer that are electronically only weakly coupled to the Ag substrate show no repulsive behavior, but form dense-packed islands.
Asunto(s)
Compuestos Macrocíclicos/química , Nanopartículas del Metal/química , Nanopartículas del Metal/ultraestructura , Plata/química , Sitios de Unión , Ensayo de Materiales , Tamaño de la Partícula , Transición de Fase , Electricidad Estática , Propiedades de SuperficieRESUMEN
Repulsive interactions: a staging of supramolecular aggregation from (0D) clusters to (1D) chains and (2D) assemblies as a function of molecular coverage of dipolar porphyrins adsorbed on the Ag(111) surface is described. It displays a complex interplay of both attractive and repulsive molecule-molecule interactions, the emergence of chirality, and the registry of the substrate.
Asunto(s)
Porfirinas/química , Plata/química , Estructura Molecular , Espectrofotometría Ultravioleta , EstereoisomerismoRESUMEN
Ultrathin films of boron nitride (BN) have recently attracted considerable interest given their successful incorporation in graphene nanodevices and their use as spacer layers to electronically decouple and order functional adsorbates. Here, we introduce a BN monolayer grown by chemical vapor deposition of borazine on a single crystal Cu support, representing a model system for an electronically patterned but topographically smooth substrate. Scanning tunneling microscopy and spectroscopy experiments evidence a weak bonding of the single BN sheet to Cu, preserving the insulating character of bulk hexagonal boron nitride, combined with a periodic lateral variation of the local work function and the surface potential. Complementary density functional theory calculations reveal a varying registry of the BN relative to the Cu lattice as origin of this electronic Moiré-like superstructure.
RESUMEN
The control of organic molecules, supramolecular complexes and donor-acceptor systems at interfaces is a key issue in the development of novel hybrid architectures for regulation of charge-carrier transport pathways in nanoelectronics or organic photovoltaics. However, at present little is known regarding the intricate features of stacked molecular nanostructures stabilized by noncovalent interactions. Here we explore at the single molecule level the geometry and electronic properties of model donor-acceptor dyads stabilized by van der Waals interactions on a single crystal Ag(111) support. Our combined scanning tunneling microscopy/spectroscopy (STM/STS) and first-principles computational modeling study reveals site-selective positioning of C(60) molecules on Ce(TPP)(2) porphyrin double-decker arrays with the fullerene centered on the π-system of the top bowl-shaped tetrapyrrole macrocycle. Three specific orientations of the C(60) cage in the van der Waals complex are identified that can be reversibly switched by STM manipulation protocols. Each configuration presents a distinct conductivity, which accounts for a tristable molecular switch and the tunability of the intradyad coupling. In addition, STS data evidence electronic decoupling of the hovering C(60) units from the metal substrate, a prerequisite for photophysical applications.
RESUMEN
Studies of complex condensed matter systems have led to the discovery of materials of unexpected spatial organization as glasses, glassy crystals, quasicrystals, and protein and virus crystals. Here, we present two-dimensional (2D) short-range disordered molecular crystalline networks, which, regarding spatial organization, can be considered as surface analogues of 3D glassy crystals. In particular, the deposition of a flexible molecular module on Cu(111) gives rise to distinct phases whose characteristics have been examined in real space by scanning tunneling microscopy: a 2D short-range distortional disordered crystalline network and a 2D short-range orientational disordered crystalline network, respectively. Both phases exhibit a random arrangement of nanopores that are stabilized by the simultaneous presence of metal-organic and pyridyl-pyridyl interactions. The 2D short-range distortional disordered crystalline network displayed intriguing flexibility, as probed by the STM tip that modifies the pore shape, a prerequisite for adaptive behavior in host-guest processes.
RESUMEN
The development of a variety of nanoscale applications requires the fabrication and control of atomic or molecular switches that can be reversibly operated by light, a short-range force, electric current or other external stimuli. For such molecules to be used as electronic components, they should be directly coupled to a metallic support and the switching unit should be easily connected to other molecular species without suppressing switching performance. Here, we show that a free-base tetraphenyl-porphyrin molecule, which is anchored to a silver surface, can function as a molecular conductance switch. The saddle-shaped molecule has two hydrogen atoms in its inner cavity that can be flipped between two states with different local conductance levels using the electron current through the tip of a scanning tunnelling microscope. Moreover, by deliberately removing one of the hydrogens, a four-level conductance switch can be created. The resulting device, which could be controllably integrated into the surrounding nanoscale environment, relies on the transfer of a single proton and therefore contains the smallest possible atomistic switching unit.