RESUMEN
Decalobanthus peltatus is a woody vine that is commonly utilized in traditional Southeast Asian medicinal preparations. Despite the documented therapeutic uses of D. peltatus, there is hardly any information regarding its toxic effects on its consumers. In this study, crude leaf extracts (aqueous, methanol, ethyl acetate, and hexane) from D. peltatus were prepared and evaluated for their embryotoxicity and teratogenic effects. Phytochemical screening of bioactive compounds from the plants showed the presence of alkaloids, flavonoids, saponins, steroids, and tannins. In addition, investigations on the toxicity of the crude leaf extracts were determined using brine shrimp lethality assay, in which the LC50 was calculated. Results showed that the ethyl acetate leaf extract was the most toxic among the crude leaf extracts, with an LC50 of 14.54 ppm. Based on this result, ethyl acetate leaf extract was treated on duck embryos, and the alteration of vascular branching patterns in the chorioallantoic membrane was quantified. Gross morphological and histological analysis of the skin tissues from the treated duck embryos were also examined. We found significant reduction of primary and tertiary vessel diameters in the duck embryos treated with ethyl acetate leaf extracts in both concentrations compared to the control group. Treated duck embryos exhibited gross malformations, growth retardation, and hemorrhages on the external body surfaces at 1000 ppm. Histopathological analysis of the skin tissues from the 14-day-old treated duck embryos showed a reduced number of feather follicles compared to the control group. These results suggest that D. peltatus crude leaf extracts present risks when taken in significant dosages and comprehensive toxicity testing on therapeutic herbs should be performed to ensure their safety on the consumers.
RESUMEN
Historical tailings storage facilities (TSFs) are either abandoned or sparsely rehabilitated promoting acid mine drainage (AMD) formation and heavy metal release. To sustainably manage these sites, a geochemical audit coupled with numerical simulation to predict AMD flow paths and heavy metal migration are valuable. In this study, a 40-year-old TSF in Hokkaido, Japan was investigated. Tailings in this historical TSF contain pyrite (FeS2) while its copper (Cu) and zinc (Zn) contents were 1400-6440 mg/kg and 2800-22,300 mg/kg, respectively. Copper and Zn were also easily released in leaching tests because they are partitioned with the exchangeable phase (29% of Zn; 15% of Cu) and oxidizable fraction (25% of Zn; 33% of Cu). Kinetic modeling results attributed AMD formation to the interactions of pyrite and soluble phases in the tailings with oxygenated groundwater, which is supported by the sequential extraction and leaching results. Calibrations of groundwater/AMD flow and solute transport in the 2D reactive transport model were successfully done using hydraulic heads measured on-site and leaching results, respectively. The model forecasted the quality of AMD to deteriorate with time and AMD formation to continue for 1000 years. It also predicted ~24% AMD flux reduction, including lower Zn release with time when recharge reduction interventions are implemented on-site.
Asunto(s)
Metales Pesados , Zinc , Cobre , Monitoreo del Ambiente/métodos , Japón , Metales Pesados/análisis , MineríaRESUMEN
Tight junction complexes are involved in the establishment and maintenance of cell polarity and the regulation of signalling pathways, controlling biological processes such as cell differentiation and cell proliferation. MarvelD3 is a tight junction protein expressed in adult epithelial and endothelial cells. In Xenopus laevis, MarvelD3 morphants present differentiation defects of several ectodermal derivatives. In vitro experiments further revealed that MarvelD3 couples tight junctions to the MEKK1-JNK pathway to regulate cell behaviour and survival. In this work, we found that MarvelD3 is expressed from early developmental stages in the exocrine and endocrine compartments of the pancreas, as well as in endothelial cells of this organ. We thoroughly characterized MarvelD3 expression pattern in developing pancreas and evaluated its function by genetic ablation. Surprisingly, inactivation of MarvelD3 in mice did not alter development and differentiation of the pancreatic tissue. Moreover, tight junction formation and organization, cell polarization, and activity of the JNK-pathway were not impacted by the deletion of MarvelD3.
Asunto(s)
Proteínas con Dominio MARVEL/genética , Páncreas/embriología , Páncreas/fisiología , Proteínas de Uniones Estrechas/genética , Animales , Sistemas CRISPR-Cas , Diferenciación Celular/genética , Femenino , Regulación del Desarrollo de la Expresión Génica , Sistema de Señalización de MAP Quinasas/genética , Proteínas con Dominio MARVEL/metabolismo , Masculino , Ratones Endogámicos C57BL , Ratones Noqueados , Páncreas/citología , Glándulas Salivales/fisiología , Análisis Espacio-Temporal , Proteínas de Uniones Estrechas/metabolismoRESUMEN
The continuous accumulation of artisanal and small-scale gold mining (ASGM) tailings in the Philippines without adequate storage and disposal facility could lead to human health and environmental disasters in the long run. In this study, ASGM tailings was simultaneously stabilized and repurposed as construction material via geopolymerization using coal fly ash, palm oil fuel ash and a powder-based alkali activator. Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) identified iron sulfides in the tailings containing arsenic (As), cadmium (Cd), copper (Cu), lead (Pb) and zinc (Zn), which could be released via weathering. The average unconfined compressive strengths (UCS) of tailings-based geopolymers at 14 days curing were 7.58 MPa and 7.7 MPa with fly ash and palm oil fuel ash, respectively. The tailings-based geopolymers with palm oil fuel ash had higher UCS most likely due to CASH reaction product formation that improved strength formation. The toxicity characteristic leaching procedure (TCLP) results showed very low leachabilities of As, Pb and Fe in the geopolymer materials suggesting ASGM tailings was effectively encapsulated within the geopolymer matrix. Overall, the geopolymerization of ASGM tailings is a viable and promising solution to simultaneously stabilize mining and industrial wastes and repurpose them into construction materials.
RESUMEN
Artisanal and small-scale gold mining (ASGM) operations are major contributors to the Philippines' annual gold (Au) output (at least 60%). Unfortunately, these ASGM activities lacked adequate tailings management strategies, so contamination of the environment is prevalent. In this study, soil contamination with copper (Cu), lead (Pb), zinc (Zn) and arsenic (As) due to ASGM activities in Nabunturan, Davao de Oro, Philippines was investigated. The results showed that ASGM-impacted soils had Cu, Pb, Zn and As up to 3.6, 83, 73 and 68 times higher than background levels, respectively and were classified as 'extremely' polluted (CD = 30-228; PLI = 5.5-34.8). Minerals typically found in porphyry copper-gold ores like pyrite, chalcopyrite, malachite, galena, sphalerite and goethite were identified by XRD and SEM-EDS analyses. Furthermore, sequential extraction results indicate substantial Cu (up to 90%), Pb (up to 50%), Zn (up to 65%) and As (up to 48%) partitioned with strongly adsorbed, weak acid soluble, reducible and oxidisable fractions, which are considered as 'geochemically mobile' phases in the environment. Although very high Pb and Zn were found in ASGM-impacted soils, they were relatively immobile under oxidising conditions around pH 8.5 because of their retention via adsorption to hydrous ferric oxides (HFOs), montmorillonite and kaolinite. In contrast, Cu and As release from the historic ASGM site samples exceeded the environmental limits for Class A and Class C effluents, which could be attributed to the removal of calcite and dolomite by weathering. The enhanced desorption of As at around pH 8.5 also likely contributed to its release from these soils.
Asunto(s)
Minería , Contaminantes del Suelo/análisis , Contaminantes del Suelo/química , Suelo/química , Arsénico/análisis , Arsénico/química , Cobre/análisis , Cobre/química , Oro/análisis , Hierro/química , Compuestos de Hierro/química , Plomo/análisis , Plomo/química , Minerales/química , Filipinas , Sulfuros/química , Difracción de Rayos X , Zinc/análisis , Zinc/químicaRESUMEN
Acid mine drainage (AMD) formation and toxic arsenic (As) pollution are serious environmental problems encountered worldwide. In this study, we investigated the crucial roles played by common secondary mineral phases formed during the natural weathering of pyrite-bearing wastes-soluble salts (melanterite, FeSO4·7H2O) and metal oxides (hematite, Fe2O3)-on AMD formation and As mobility under acidic conditions (pH 1.5-4) prevalent in historic tailings storage facilities, pyrite-bearing rock dumps and AMD-contaminated soils and sediments. Our results using a pyrite-rich natural geological material containing arsenopyrite (FeAsS) showed that melanterite and hematite both directly-by supplying H+ and/or oxidants (Fe3+)-and indirectly-via changes in the nature of oxidation layer formed on pyrite-influenced pyrite oxidation dynamics. Based on SEM-EDS, DRIFT spectroscopy and XPS results, the oxidation layer on pyrite was mainly composed of ferric arsenate and K-Jarosite when melanterite was abundant with/without hematite but changed to Fe-oxyhydroxide/oxide and scorodite when melanterite was low and hematite was present. This study also observed the formation of a mechanically 'strong' coating on pyrite that suppressed the mineral's oxidation. Finally, As mobility under acidic conditions was limited by its precipitation as ferric arsenate, scorodite, or a Fe/Al arsenate phase, including its strong adsorption to Fe-oxyhydroxides/oxides.
RESUMEN
Scorodite is an important mineral not only for arsenic (As) removal from industrial wastewaters but also in the mobility and final fate of As in waste rocks, contaminated soils and sediments, and mine tailings. Because of the mineral's high As-loading capacity and stability, numerous studies have been done to understand its formation. Unfortunately, most of these studies were limited to elevated temperatures (>70⯰C), so the processes involved in scorodite formation under ambient conditions remain unclear. This study provides evidence of the catalytic effects of hematite on the formation of scorodite at 25⯰C in a pyrite-rich natural geologic material. Scorodite peaks were detected in the XRD patterns of the leaching residues with and without hematite, but those in the former were stronger and more pronounced than the latter. These results suggest that the formation of scorodite was catalysed by hematite, a generalisation that is further supported by strong characteristic IR absorption bands of scorodite at 819 cm-1 (As-O bending vibration), 785 and 725 cm-1 (As-O stretching vibrations), and 2990â¯cm-1 (OH-vibration) as well as the distinct XPS binding energies of Fe(III)-As (709.7â¯eV), As(V)-O (44.8, 44.31 and 43.7â¯eV), O2- (530.5â¯eV) and coordinated water (531.3â¯eV) in scorodite. This phenomenon could be attributed to three possible mechanisms: (1) more rapid precipitation promoted by the "seeding" effect of hematite particles, (2) additional supply of Fe3+ from hematite dissolution under acidic conditions, and (3) enhanced oxidations of Fe2+ to Fe3+ and As(III) to As(V) on the surface of hematite.
Asunto(s)
Arsénico/química , Arsenicales/síntesis química , Compuestos Férricos/química , Aguas Residuales/química , Purificación del Agua/métodos , Catálisis , Hierro/química , Oxidación-Reducción , Contaminantes del Suelo/análisis , Sulfuros/química , Contaminantes Químicos del Agua/análisisRESUMEN
Massive and ambitious underground space development projects are being undertaken by many countries around the world to decongest megacities, improve the urban landscapes, upgrade outdated transportation networks, and expand modern railway and road systems. A number of these projects, however, reported that substantial portions of the excavated debris are oftentimes naturally contaminated with hazardous elements, which are readily released in substantial amounts once exposed to the environment. These contaminated excavation debris/spoils/mucks, loosely referred to as "naturally contaminated rocks", contain various hazardous and toxic inorganic elements like arsenic (As), selenium (Se), boron (B), and heavy metals like lead (Pb), cadmium (Cd), copper (Cu), and zinc (Zn). If left untreated, these naturally contaminated rocks could pose very serious problems not only to the surrounding ecosystem but also to people living around the construction and disposal sites. Several incidents of soil and ground/surface water contamination, for example, have been documented due to the false assumption that excavated materials are non-hazardous because they only contain background levels of environmentally regulated elements. Naturally contaminated rocks are hazardous wastes, but they still remain largely unregulated. In fact, standard leaching tests for their evaluation and classification are not yet established. In this review, we summarized all available studies in the literature about the factors and processes crucial in the enrichment, release, and migration of the most commonly encountered hazardous and toxic elements in naturally contaminated geological materials. Although our focus is on naturally contaminated rocks, analogue systems like contaminated soils, sediments, and other hazardous wastes that have been more widely studied will also be discussed. Classification schemes and leaching tests to properly identify and regulate excavated rocks that may potentially pose environmental problems will be examined. Finally, management and mitigation strategies to limit the negative effects of these hazardous wastes are introduced.