Delicate Analysis of Interacting Proteins and Their Assemblies by Flow Field-Flow Fractionation Techniques.

We study the efficiency of several asymmetrical flow field-flow fractionation (AF4) techniques to investigate self-associating wheat gluten proteins. We compare the use of a denaturing buffer including sodium dodecyl sulfate (SDS) and a mild chaotropic solvent, water/ethanol, as the eluent, on a model gluten sample. Through a thorough analysis of the data obtained from coupled light scattering detectors and with the identification of molecular composition of the eluted protein, we evidence coelution events in several conditions. We show that the focus step used in conventional AF4 with the SDS buffer leads to the formation of aggregates that coelute with monomeric proteins. By contrast, a frit-inlet device enables the fractionation of individual wheat proteins in the SDS buffer. Interestingly conventional AF4, using water/ethanol as eluent, is an effective method for fractionating gluten proteins and their complex dynamic assemblies, which involve weak forces and are composed of both monomeric and polymeric proteins.

Ozonized 2-hydroxypropyl-ß-cyclodextrins as novel materials with oxidative and bactericidal properties.

Ozonized (2-Hydroxypropyl)-ß-cyclodextrins (Oz-HPbCDs) were produced by direct gas/solid reaction between gaseous ozone (O3) and solid HPbCD. The solid materials obtained were first characterized using physical and chemical methods and compared to the initial HPbCD. The main process parameters of the synthesis were studied independently to assess their effect on the oxidizing power of Oz-HPbCDs. The ability of the Oz-HPbCDs to retain their oxidative properties over time was evaluated, at different storage temperatures, for a period of at least two months. Lastly, aqueous solutions of HPbCD and Oz-HPbCD at different concentrations were contacted with bacterial strains of Escherichia coli and Streptococcus uberis to see whether these materials might have bactericidal properties. Since normal bacterial growth was noted with HPbCD, the antimicrobial efficiency of Oz-HPbCDs was clearly demonstrated on these two types of bacteria.

Study of the relationship between red wine colloidal fraction and astringency by asymmetrical flow field-flow fractionation coupled with multi-detection.

Macromolecules including condensed tannins and polysaccharides impact wine taste and especially astringency. Asymmetrical Flow-Field-Flow-Fractionation (AF4) coupled to UV detection (UV), multi-angle light scattering (MALS) and refractive index detection (dRI) has been proposed to separate red wine colloids. The present work aimed at relating AF4-mutidetection profiles with red wine astringency. Fifty commercial red wines characterized by a trained sensory panel were analysed by AF4-UV-MALS-dRI and UV-visible spectroscopy. The analytical data set was built by selecting the three variables most predictive of the astringency score from each table (UV, dRI, MALS, Mw distribution, and UV-visible spectra of whole wine, permeate and retentate A4F fractions) and analysed by principal component analysis. Red wine astringency was more related to variables extracted from the AF4 data than to UV- absorbance of the wine or permeate, confirming the relevance of AF4-multidetection for analysis of the colloidal fraction involved in this perception.

Ozonation of three different fungal conidia associated with apple disease: Importance of spore surface and membrane phospholipid oxidation.

Although ozone (O3) is a well-known bactericide and fungicide, the required dose of ozone can depend significantly on the targeted pathogens. The present research evaluates the variation in sensibility to ozone of three fungal species from a single fungal group. The three fungal species selected, Venturia inaequalis, Botrytis cinerea, and Neofabreae alba, belong to the Ascomycota group and attack apples. The fungi were exposed to ozone by bubbling directly into the spore solutions (treatment period ranged from 0.5 to 4 min, ozone concentration in inlet gas ranged from 1 to 30 g/m3). The rates of germination were determined, and the level of peroxidation of the lipid membrane was quantified based on the malondialdehyde (MDA) production. The results indicate that ozone effectively reduces spore development and suggest that the fungi differ in sensitivity. To reduce by 50% the spore germination rate of N. alba, B. cinerea, and V. inaequalis requires ozone doses of 0.01, 0.03, and 0.07 mg/ml, respectively. Spore sensitivity seems to be directly linked to spore surface. For all the fungal species, the MDA level and the level of spore inactivation both increase with ozone dose, which confirms that ozone alters the cell membrane.

Prediction and detection of human epileptic seizures based on SIFT-MS chemometric data.

Although epilepsy is considered a public health issue, the burden imposed by the unpredictability of seizures is mainly borne by the patients. Predicting seizures based on electroencephalography has had mixed success, and the idiosyncratic character of epilepsy makes a single method of detection or prediction for all patients almost impossible. To address this problem, we demonstrate herein that epileptic seizures can not only be detected by global chemometric analysis of data from selected ion flow tube mass spectrometry but also that a simple mathematical model makes it possible to predict these seizures (by up to 4 h 37 min in advance with 92% and 75% of samples correctly classified in training and leave-one-out-cross-validation, respectively). These findings should stimulate the development of non-invasive applications (e.g., electronic nose) for different types of epilepsy and thereby decrease of the unpredictability of epileptic seizures.

Fractionation and characterization of polyphenolic compounds and macromolecules in red wine by asymmetrical flow field-flow fractionation.

Red wine is a complex matrix containing macromolecules such as condensed tannins and polysaccharides. Wine macromolecular components and their interactions have been reported to impact taste properties such as astringency but the colloidal systems formed in wine are not well known. A key prerequisite to characterize these systems is the ability to work under analytical conditions as close as possible to the colloid environment, preserving the sample structure and limiting the denaturation of macromolecular complexes. A method of Asymmetric Flow Field-Flow Fractionation (AF4) coupled with UV detection, multi-angle light scattering (MALS), and differential refractometer index (dRI) (AF4-UV-MALS-dRI) has been developed to analyse macromolecules, including tannins and polysaccharides, and macromolecular complexes, in red wine. This method separates objects according to their hydrodynamic radius and does not require calibration to determine molecular weight (Mw). AF4 can provide native separation of wine colloidal matter while working with simulated wine as mobile phase. The channel was equipped with a 350-µm spacer and the membrane made in regenerated cellulose had a cut-off of 5kDa. Different parameters of crossflow rate were investigated using a generic red wine to optimize separation conditions. Then, purified fractions of polysaccharides and tannins were analysed using the selected AF4 parameters. The comparison of the peaks obtained for these fractions and for the wine sample allowed us to determine the retention time associated with these macromolecules. The AF4 fractogram of wine was divided into four fractions. The first three were assigned to higher Mw tannins coeluted with lower Mw polysaccharides such as rhamnogalacturonan II (F1), to intermediate Mw polysaccharides (F2), and to higher Mw mannoproteins (F3) whereas the last fraction (F4) was not identified. Furthermore, our results have shown that AF4-UV-MALS-dRI could be an efficient technique to separate large size tannins as well as polysaccharides and macromolecular complexes.

Ozone Quantification by Selected Ion Flow Tube Mass Spectrometry: Influence of Humidity and Manufacturing Gas of Ozone Generator.

The quantification of ozone by SIFT-MS was investigated in conditions suitable with an industrial emission context (high ozone demand, dry air/oxygen as the manufacturing gas of the ozone generator, and high humidity levels beyond saturation at room conditions). Ozone reacts with four negative precursor ions available in the SIFT-MS device (NO2-, O2-, HO-, and O-), each precursor ion having its specific domain of linearity. For a high ozone concentration range, only NO2- and O2- have resulted in a linear behavior (between 1 and 100 ppmv of O3 for NO2-, between 1 and 50 ppmv of O3 for O2-). No water interference was identified during ozone measurements by SIFT-MS using NO2- and O2- precursor ions, even with extreme humidity levels. The presence of nitrogen oxide contaminants (due to the use of dry air as the manufacturing gas of the ozone generator) affected the ozone quantification by SIFT-MS. It is critical for NO2- precursor ions, whose rate constant varied as a function of NO2 concentrations. With O2- precursor ion, ozone was successfully measured in the presence of nitrogen oxides; however, the secondary chemistry must be taken into account.

Aldehydes gas ozonation monitoring: Interest of SIFT/MS versus GC/FID.

Two analytical techniques - online Gas Chromatography coupled with Flame Ionization Detector (often used method for VOCs monitoring) versus Selected Ion Flow Tube coupled with Mass Spectrometry (a more recent technique based on direct mass spectrometry) - were compared in association to an ozone-based gas treatment. Selecting aldehydes as the representative VOCs, their concentrations were monitored during ozonation experiments by both techniques in parallel. Contradictory results were obtained in the presence of ozone. Aldehydes were up to 90% removed due to a reaction with ozone according to GC/FID analysis, whereas with SIFT/MS, aldehydes concentration remained at the same level during the experiments regardless of the ozone presence. In addition, it was demonstrated that the apparent aldehydes removal was affected by GC injector temperature, varying from 90% (when it was at 250 °C) to 60% (at 100 °C). Meanwhile, even when the ozonation reactor was heated to 100 °C, no aldehydes conversion was evidenced by SIFT/MS, suggesting that the GC injector temperature was not the only interference-causing parameter. The ozone-aldehyde reaction is probably catalyzed by some material of GC injector and/or column. An ozone-GC interference was therefore confirmed, making unsuitable the use of GC/FID with silicone stationary phase to monitor aldehydes in presence of high concentrations of ozone (at least 50 ppmv). On the other hand, SIFT/MS was validated as a reliable technique, which can be employed in order to measure VOCs concentrations in ozonation processes.

Physicochemical characterization and study of molar mass of industrial gelatins by AsFlFFF-UV/MALS and chemometric approach.

Industrial gelatins have different physicochemical properties that mainly depend of the raw materials origin and the extraction conditions. These properties are closely related to the molar mass distribution of these gelatins. Several methods exist to characterize molar mass distribution of polymer, including the Asymmetrical Flow Field Flow Fractionation method. The goal of this study is to analyze the relationship between physicochemical properties and the gelatins molar mass distribution obtained by Asymmetrical Flow Field Flow Fractionation. In this study, 49 gelatins samples extracted from pig skin are characterized in terms of gel strength and viscosity and their molar mass distribution are analyzed by Asymmetrical Flow Field Flow Fractionation coupled to an Ultraviolet and Multi Angle Light Scattering detector. This analytical method is an interesting tool for studying, simultaneously, the primary chains and the high-molar-mass fraction corresponding to the polymer chains. Correlation analysis between molar mass distribution data from the different fractions highlights the importance of high molar mass polymer chains to explain the gel strength and viscosity of gelatins. These results are confirmed by an additional chemometric approach based on the UV absorbance of gelatin fractograms to predict gel strength (r2Cal = 0.85) and viscosity (r2Cal = 0.79).

Modulating analytical characteristics of thermovinified Carignan musts and the volatile composition of the resulting wines through the heating temperature.

The impact of two temperature levels (50 °C and 75 °C) and heating times (30 min and 3 h) on the composition of thermovinified musts and wines from Carignan was investigated at the laboratory scale in 2014 and 2015. The heating temperature had a significant impact on the extraction of amino acids and a probable thermal degradation of anthocyanins was noted at 75 °C. In 2014, musts from grapes that underwent a heat treatment at 50 °C for 3 h had a similar level of phenolic compounds as those treated at 75 °C for 30 min. This indicates that the reduction of the heating temperature in some vintages can be compensated for through an extension of the heating period. Several grape-derived molecules were impacted by the rise in temperature and wines made from grapes treated at 50 °C in most cases contained larger concentrations of geraniol, ß-citronellol, ß-damascenone and 3-mercaptohexanol.

Characterization of Non-Derivatized Cellulose Samples by Size Exclusion Chromatography in Tetrabutylammonium Fluoride/Dimethylsulfoxide (TBAF/DMSO).

This paper deals with the use of tetrabutylammonium fluoride/dimethylsulfoxide (TBAF/DMSO) to characterize the molar mass distribution of non-derivatized cellulosic samples by size exclusion chromatography (SEC). Different cellulose samples with various average degree of polymerization (DP) were first solubilized in this solvent system, with increasing TBAF rates, and then analyzed by SEC coupled to a refractive index detector (RID), using DMSO as mobile phase. The Molar Masses (MM) obtained by conventional calibration were then discussed and compared with suppliers' data and MM determined by viscosimetry measurements. By this non-classic method, molar mass of low DP samples (Avicel® and cotton fibers) have been determined. For high DP samples (α-cellulose and Vitacel®), dissolution with TBAF concentration of 10 mg/mL involved elution of cellulose aggregates in the exclusion volume, related to an incomplete dissolution or the dilution of TBAF molecules in elution solvent, preventing the correct evaluation of their molar mass.

Frit inlet field-flow fractionation techniques for the characterization of polyion complex self-assemblies.

Polymer self-assemblies joining oppositely charged chains, known as polyion complexes (PICs), have been formed using poly(ethyleneoxide - b - acrylic acid)/poly(l-lysine), poly(ethyleneoxide-b-acrylic acid)/dendrigraft poly(l-lysine) and poly[(3-acrylamidopropyl) trimethylammonium chloride - b - N - isopropyl acrylamide]/poly(acrylic acid). The self-assemblies have been first characterized in batch by Dynamic Light Scattering. In a second step, their analysis by Flow Field-Flow Fractionation techniques (FlFFF) was examined. They were shown to be very sensitive to shearing, especially during the focus step of the fractionation, and this led to an incompatibility with asymmetrical FlFFF. On the other hand, Frit Inlet FlFFF proved to be very efficient to observe them, either in its symmetrical (FI-FlFFF) or asymmetrical version (FI-AsFlFFF). Conditions of elution were found to optimize the sample recovery in pure water. Spherical self-assemblies were detected, with a size range between 70-400nm depending on the polymers. Compared to batch DLS, FI-AsFlFFF clearly showed the presence of several populations in some cases. The influence of salt on poly(ethyleneoxide-b-acrylic acid) (PEO-PAA) 6000-3000/dendrigraft poly(l-lysine) (DGL 3) was also assessed in parallel in batch DLS and FI-AsFlFFF. Batch DLS revealed a first process of swelling of the self-assembly for low concentrations up to 0.8M followed by the dissociation. FI-AsFlFFF furthermore indicated a possible ejection of DGL3 from the PIC assembly for concentrations as low as 0.2M, which could not be observed in batch DLS.

Drug Release by Direct Jump from Poly(ethylene-glycol-b-ε-caprolactone) Nano-Vector to Cell Membrane.

Drug delivery by nanovectors involves numerous processes, one of the most important being its release from the carrier. This point still remains unclear. The current work focuses on this point using poly(ethyleneglycol-b-ε-caprolactone) micelles containing either pheophorbide-a (Pheo-a) as a fluorescent probe and a phototoxic agent or fluorescent copolymers. This study showed that the cellular uptake and the phototoxicity of loaded Pheo-a are ten times higher than those of the free drug and revealed a very low cellular penetration of the fluorescence-labeled micelles. Neither loaded nor free Pheo-a displayed the same cellular localization as the labeled micelles. These results imply that the drug entered the cells without its carrier and probably without a disruption, as suggested by their stability in cell culture medium. These data allowed us to propose that Pheo-a directly migrates from the micelle to the cell without disruption of the vector. This mechanism will be discussed.

Structural modifications of cellulose samples after dissolution into various solvent systems.

This work deals with the modifications resulting from the dissolution of four commercial cellulosic samples, with different crystallinity rates and degrees of polymerization (DPs), in four solvent systems, known and used to dissolve cellulose. The dissolution conditions were optimized for the 16 various systems and followed by turbidity measurements. After regeneration, the samples were analyzed by thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), and X-ray diffractometry (XRD) to study their modification. Viscosimetry measurements were used to evaluate the potential decrease of the DP after dissolution. The observed structural modifications established that, for low DP, all the solvent systems were efficient in dissolving the cellulose without altering the DP, except BMIM [Cl], which provoked a decrease of up to 40 % and a decrease of around 20 % of the degradation temperature (onset temperature, T o). For high molecular weight (MW) celluloses, DMSO/TBAF was the only system to allow a complete dissolution without any molar mass loss and degradation temperature modification.

Self-assembled polymeric vectors mixtures: characterization of the polymorphism and existence of synergistic effects in photodynamic therapy.

The objective of this work was to assess the relation between the purity of polymeric self-assemblies vectors solution and their photodynamic therapeutic efficiency. For this, several amphiphilic block copolymers of poly(ethyleneoxide-b-ε-caprolactone) have been used to form self-assemblies with different morphologies (micelles, worm-like micelles or vesicles). In a first step, controlled mixtures of preformed micelles and vesicles have been characterized both by dynamic light scattering and asymmetrical flow field flow fractionation (AsFlFFF). For this, a custom-made program, STORMS, was developed to analyze DLS data in a thorough manner by providing a large set of fitting parameters. This showed that DLS only sensed the larger vesicles when the micelles/vesicles ratio was 80/20 w/w. On the other hand, AsFlFFF allowed clear detection of the presence of micelles when this same ratio was as low as 10/90. Subsequently, the photodynamic therapy efficiency of various controlled mixtures was assessed using multicellular spheroids when a photosensitizer, pheophorbide a, was encapsulated in the polymer self-assemblies. Some mixtures were shown to be as efficient as monomorphous systems. In some cases, mixtures were found to exhibit a higher PDT efficiency compared to the individual nano-objects, revealing a synergistic effect for the efficient delivery of the photosensitizer. Polymorphous vectors can therefore be superior in therapeutic applications.

Multimodal Dispersion of Nanoparticles: A Comprehensive Evaluation of Size Distribution with 9 Size Measurement Methods.

PURPOSE: Evaluation of particle size distribution (PSD) of multimodal dispersion of nanoparticles is a difficult task due to inherent limitations of size measurement methods. The present work reports the evaluation of PSD of a dispersion of poly(isobutylcyanoacrylate) nanoparticles decorated with dextran known as multimodal and developed as nanomedecine. METHODS: The nine methods used were classified as batch particle i.e. Static Light Scattering (SLS) and Dynamic Light Scattering (DLS), single particle i.e. Electron Microscopy (EM), Atomic Force Microscopy (AFM), Tunable Resistive Pulse Sensing (TRPS) and Nanoparticle Tracking Analysis (NTA) and separative particle i.e. Asymmetrical Flow Field-Flow Fractionation coupled with DLS (AsFlFFF) size measurement methods. RESULTS: The multimodal dispersion was identified using AFM, TRPS and NTA and results were consistent with those provided with the method based on a separation step prior to on-line size measurements. None of the light scattering batch methods could reveal the complexity of the PSD of the dispersion. CONCLUSIONS: Difference between PSD obtained from all size measurement methods tested suggested that study of the PSD of multimodal dispersion required to analyze samples by at least one of the single size particle measurement method or a method that uses a separation step prior PSD measurement.

Ozonation of sunflower oils: impact of experimental conditions on the composition and the antibacterial activity of ozonized oils.

Ozone can react with vegetable oils to produce ozonized oils which have antimicrobial properties and can be used in dermatology. The aim of this study was to evaluate the influence of ozonation conditions and of the initial fatty acid composition on iodine index (II), peroxide index (IP), acidity value (AV) of ozonized sunflower oils. The antibacterial activity of these products against the three bacterial strains that are more often involved in mastitis (Staphylococcus aureus, Escherichia coli and Streptococcus uberis) was also evaluated. In that purpose, two different sunflower oils have been studied: a "classical" oil (55% linoleic acid, 35% oleic acid) and a "high oleic" oil (90% oleic acid). Both were ozonized with or without water during different times (from 1 to 7 h). Results show that the addition of water has a direct impact on the increase in IP (up to 2600 meq of active oxygen/kg of oil with water and 430 without) and AV but does not influence the kinetic of the decrease in II. Minimal inhibitory concentrations were ranging from 1.25 to 40 mg/mL and the antibacterial activity of oils ozonized with water was better than the one of oils ozonized alone. These results are an open door to new applications of ozonized oils.

Asymmetrical flow field-flow fractionation with multi-angle light scattering and quasi-elastic light scattering for characterization of polymersomes: comparison with classical techniques.

Polymersomes formed from amphiphilic block copolymers, such as poly(ethyleneoxide-b-ε-caprolactone) (PEO-b-PCL) or poly(ethyleneoxide-b-methylmethacrylate), were characterized by asymmetrical flow field-flow fractionation coupled with quasi-elastic light scattering (QELS), multi-angle light scattering (MALS), and refractive index detection, leading to the determination of their size, shape, and molecular weight. The method was cross-examined with more classical ones, like batch dynamic and static light scattering, electron microscopy, and atomic force microscopy. The results show good complementarities between all the techniques; asymmetrical flow field-flow fractionation being the most pertinent one when the sample exhibits several different types of population.

Polymeric micelles encapsulating photosensitizer: structure/photodynamic therapy efficiency relation.

Various polymeric micelles were formed from amphiphilic block copolymers, namely, poly(ethyleneoxide-b-ε-caprolactone), poly(ethyleneoxide-b-d,l-lactide), and poly(ethyleneoxide-b-styrene). The micelles were characterized by static and dynamic light scattering, electron microscopy, and asymmetrical flow field-flow fractionation. They all displayed a similar size close to 20 nm. The influence of the chemical structure of the block copolymers on the stability upon dilution of the polymeric micelles was investigated to assess their relevance as carriers for nanomedicine. In the same manner, the stability upon aging was assessed by FRET experiments under various experimental conditions (alone or in the presence of blood proteins). In all cases, a good stability over 48 h for all systems was encountered, with PDLLA copolymer-based systems being the first to release their load slowly. The cytotoxicity and photocytotoxicity of the carriers were examined with or without their load. Lastly, the photodynamic activity was assessed in the presence of pheophorbide a as photosensitizer on 2D and 3D tumor cell culture models, which revealed activity differences between the 2D and 3D systems.

Kinetic aspects and identification of by-products during the ozonation of bitertanol in agricultural wastewaters.

The degradation of bitertanol by ozone treatment is investigated. Solutions of bitertanol (8.4 µg mL(-1)) were prepared either by dissolution of the standard or by dilution of Gaucho Blé seed loading solution and then ozonated under different conditions. Evolution of the concentrations of bitertanol and its ozonation by-products in both solutions was monitored by HPLC-UV as a function of the treatment time for a concentration of 100 gm(-3) of ozone in the inlet gas. Bitertanol degradation was found to follow a pseudo-first order reaction in both cases. However, the rate of the reaction in diluted seed loading solution was much lower (0.19 vs. 0.27 min(-1) in standard solution) and was close to the reaction rate observed in the presence of a radical scavenger, tert-butanol (0.11 min(-1)). Thus, it may be suggested that additives present in the seed loading solution may play the role of radical scavengers. Study of ozone concentration in the inlet gas (from 25 to 100 gm(-3)) showed that ozone degradation is also a first-order reaction with respect to ozone. Four ozonation by-products were highlighted, collected and identified by HPLC coupled with an ion trap mass spectrometer using positive electrospray ionization mode. A degradation pathway of bitertanol was finally proposed.