Net charge affects morphology and visual properties of ovalbumin aggregates.

The effect of ovalbumin net charge on aggregate morphology and visual properties was investigated using chromatography, electrophoresis, electron microscopy, and turbidity measurements. A range of differently charged ovalbumin variants (net charge ranging from -1 to -26 at pH 7) was produced using chemical engineering. With increasing net charge, the degree of branching and flexibility of the aggregates decreased. The turbidity of the solutions reflected the aggregate morphology that was observed with transmission electron microscopy. Increasing the stiffness of the aggregates transformed the solutions from turbid to transparent. Artificially shielding the introduced net charge by introducing salt in the solution resulted in an aggregate morphology that was similar to that for low-net-charge variants. The morphology of heat-induced aggregates and the visual appearance of the solutions were significantly affected by net charge. We also found that the morphology of ovalbumin aggregates can be rapidly probed by high-throughput turbidity experiments.

Lubrication properties of protein aggregate dispersions in a soft contact.

The lubrication, rheological, and molecular properties of two different protein aggregate dispersions were compared: globular aggregates of whey protein isolate (WPI) and fibrillar aggregates of ovalbumin from egg white. These dispersions are models for the lubricating fluid that is present between the tongue and the palate when consuming liquid or gelled products. To simulate oral conditions, a commercial tribometer was modified so that soft rubber surfaces could be used. This allowed us to measure friction at low contact pressures similar to those present between the tongue and palate. Clear correlations were observed between the measured friction coefficients and specific properties of the lubricating fluid such as protein concentration and aggregate size and shape. Furthermore, surface properties like elasticity, surface-surface interactions, and surface roughness had a significant effect on the friction under conditions that are relevant for texture perception. We conclude that in vitro measurements at low contact pressure provide valuable information for understanding and controlling food properties that modulate oral friction.

Cross-modality of texture and aroma perception is independent of orthonasal or retronasal stimulation.

To assess the influence of orthonasal and retronasal stimulation on cross-modal interactions between texture and flavor perception of food, a series of experiments have been conducted. Healthy human subjects were exposed to strawberry aroma pulses delivered by a computer-controlled stimulator based on air dilution olfactometry. Just prior to exposure to the aroma, the human subjects consumed water, custard, or protein gels with different textures without any added aroma. The aroma was delivered as a sequence of aroma pulses, in either an orthonasal or a retronasal fashion. The retronasal presentation of aroma with concomitant presentation of texture is thought to more closely mimick the in vivo flavor release of semisolid food products as compared to orthonasal stimulation. The time between oral consumption of the food, including swallowing, and the exposure to the aroma varied between 0.5 and 6.5 s. The subjects rated the intensity of the strawberry aroma. It was observed that the intensity of aroma decreased with increasing firmness of the food that was consumed. Aroma pulses delivered 6.5 s after swallowing were perceived as being more intense as compared to aroma pulses delivered immediately after swallowing. In conjunction with late delivery, the effect cross-modal interactions apparently decreased. Significantly higher odor intensities were reported for the aroma stimuli supplied orthonasally in comparison to retronasal administration. The observed cross-modal effect of texture on aroma intensity was not significantly altered by the mode of aroma delivery, i.e., orthonasal or retronasal stimulus administration.

Disulphide bond formation in food protein aggregation and gelation.

In this short review we discuss the role of cysteine residues and cystine bridges for the functional aggregation of food proteins. We evaluate how formation and cleavage of disulphide bonds proceeds at a molecular level, and how inter- and intramolecular disulfide bonds can be detected and modified. The differences between heat-, high-pressure-, and denaturant-induced unfolding and aggregation are discussed. The effect of disulphide bonding between aggregates of proteins and protein mixtures on the functional macroscopic properties of space filling networks in protein gels is briefly presented.

Acid-induced cold gelation of globular proteins: effects of protein aggregate characteristics and disulfide bonding on rheological properties.

The process of cold gelation of ovalbumin and the properties of the resulting cold-set gels were compared to those of whey protein isolate. Under the chosen heating conditions, most protein was organized in aggregates. For both protein preparations, the aggregates consisted of covalently linked monomers. Both types of protein aggregates had comparable numbers of thiol groups exposed at their surfaces but had clearly different shapes. During acid-induced gelation, the characteristic ordering caused by the repulsive character disappeared and was replaced by a random distribution. This process did not depend on aggregate characteristics and probably applies to any type of protein aggregate. Covalent bonds are the main determinants of the gel hardness. The formation of additional disulfide bonds during gelation depended on the number and accessibility of thiol groups and disulfide bonds in the molecule and was found to clearly differ between the proteins studied. However, upon blocking of the thiol groups, long fibrillar structures of ovalbumin contribute significantly to gel hardness, demonstrating the importance of aggregate shape.

Heat-induced denaturation and aggregation of ovalbumin at neutral pH described by irreversible first-order kinetics.

The heat-induced denaturation kinetics of two different sources of ovalbumin at pH 7 was studied by chromatography and differential scanning calorimetry. The kinetics was found to be independent of protein concentration and salt concentration, but was strongly dependent on temperature. For highly pure ovalbumin, the decrease in nondenatured native protein showed first-order dependence. The activation energy obtained with different techniques varied between 430 and 490 kJ*mole(-1). First-order behavior was studied in detail using differential scanning calorimetry. The calorimetric traces were irreversible and highly scan rate-dependent. The shape of the thermograms as well as the scan rate dependence can be explained by assuming that the thermal denaturation takes place according to a simplified kinetic process where N is the native state, D is denatured (or another final state) and k a first-order kinetic constant that changes with temperature, according to the Arrhenius equation. A kinetic model for the temperature-induced denaturation and aggregation of ovalbumin is presented. Commercially obtained ovalbumin was found to contain an intermediate-stable fraction (IS) of about 20% that was unable to form aggregates. The denaturation of this fraction did not satisfy first-order kinetics.

Cold-set globular protein gels: interactions, structure and rheology as a function of protein concentration.

We identified the contribution of covalent and noncovalent interactions to the scaling behavior of the structural and rheological properties in a cold gelling protein system. The system we studied consisted of two types of whey protein aggregates, equal in size but different in the amount of accessible thiol groups at the surface of the aggregates. Analysis of the structural characteristics of acid-induced gels of both thiol-blocked and unmodified whey protein aggregates yielded a fractal dimension (2.3 +/- 0.1), which is in line with other comparable protein networks. However, application of known fractal scaling equations to our rheological data yielded ambiguous results. It is suggested that acid-induced cold-gelation probably starts off as a fractal process, but is rapidly taken over by another mechanism at larger length scales (>100 nm). In addition, indications were found for disulfide cross-link-dependent structural rearrangements at smaller length scales (<100 nm).

Role of calcium as trigger in thermal beta-lactoglobulin aggregation.

Divalent calcium ions have been suggested to be involved in intermolecular protein-Ca2+-protein cross-linking, intramolecular electrostatic shielding, or ion-induced protein conformational changes as a trigger for protein aggregation at elevated temperatures. To address the first two phenomena in the case of beta-lactoglobulin, a combination of chemical protein modification, calcium-binding, and aggregation studies was used, while the structural integrity of the modified proteins was maintained. Although increasing the number of carboxylates on the protein by succinylation results in improved calcium-binding, calcium appears to be less effective in inducing protein aggregation. In fact, the larger the number of carboxylates, the higher the concentration of calcium that is required to trigger the aggregation. Lowering the number of negative charges on the protein surface via methylation of carboxylates reduces calcium-binding properties, but calcium-induced aggregation at low concentration is improved. Monovalent sodium ions cannot take over the specific role of calcium. The relation between net surface charge and number of calcium ions bound required to trigger the aggregation suggests that calcium needs to bind site specific to carboxylates with a threshold affinity. Subsequent site-specific screening of surface charges results in protein aggregation, driven by the partial unfolding of the protein at elevated temperatures, which is then facilitated by the absence of electrostatic repulsion.

Thermodynamic stability of porcine beta-lactoglobulin. A structural relevance.

The proposed biological function of beta-lactoglobulins as transporting proteins assumes a binding ability for ligands and high stability under the acidic conditions of the stomach. This work shows that the conformational stability of nonruminant porcine beta-lactoglobulin (BLG) is not consistent with this hypothesis. Thermal denaturation of porcine BLG was studied by high-sensitivity differential scanning calorimetry within the pH range 2.0-10.0. Dependences of the denaturation temperature and enthalpy on pH were obtained, which reveal a substantial decrease in both parameters in acidic and basic media. The denaturation enthalpy follows a linear dependence on the denaturation temperature. The slope of this line is 9.4 +/- 0.6 kJ.mol-1. K-1,which is close to the denaturation heat capacity increment DeltadCp = 9.6 +/- 0.5 kJ.mol-1.K-1, determined directly from the thermograms. At pH 6.25 the denaturation temperatures of porcine and bovine BLG coincide, at 83.2 degrees C. At this pH the denaturation enthalpy of porcine BLG is 300 kJ.mol-1. The denaturation transition of porcine BLG was shown to be reversible at pH 3.0 and pH 9.0. The transition profile at both pH values follows the two-state model of denaturation. Based on the pH-dependence of the transition temperature and the linear temperature dependence of the transition enthalpy, the excess free energy of denaturation, DeltadGE, of porcine BLG was calculated as a function of pH and compared with that of bovine BLG derived from previously reported data. The pH-dependence of DeltadGE is analysed in terms of the contributions of side-chain H-bonds to the protein stability. Interactions stabilizing native folds of porcine and bovine BLG are discussed.

Physical and chemical interactions in cold gelation of food proteins.

pH-Induced cold gelation of whey proteins is a two-step process. After protein aggregates have been prepared by heat treatment, gelation is established at ambient temperature by gradually lowering the pH. To demonstrate the importance of electrostatic interactions between aggregates during this latter process, beta-lactoglobulin aggregates with a decreased iso-electric point were prepared via succinylation of primary amino groups. The kinetics of pH-induced gelation was affected significantly, with the pH gelation curves shifting to lower pH after succinylation. With increasing modification, the pH of gelation decreased to about 2.5. In contrast, unmodified aggregates gel around pH 5. Increasing the iso-electric point of beta-lactoglobulin via methylation of carboxylic acid groups resulted in gelation at more alkaline pH values. Comparable results were obtained with whey protein isolate. At low pH disulfide cross-links between modified aggregates were not formed after gelation and the gels displayed both syneresis and spontaneous gel fracture, in this way resembling the morphology of previously characterized thiol-blocked whey protein isolate gels (Alting, et al., J. Agric. Food Chem. 2000, 48, 5001-5007). Our results clearly demonstrate the importance of the net electric charge of the aggregates during pH-induced gelation. In addition, the absence of disulfide bond formation between aggregates during low-pH gelation was demonstrated with the modified aggregates.

A novel pH-dependent dimerization motif in beta-lactoglobulin from pig (Sus scrofa).

beta-Lactoglobulin (BLG) is a lipocalin and is the major protein in the whey of the milk of cows and other ruminants, but not in all mammalian species. The biological function of BLG is not clear, but a potential role in carrying fatty acids through the digestive tract has been proposed. The capability of BLG to aggregate and form gels is often used to thicken foodstuffs. The structure of the porcine form is sufficiently different from other known BLG structures that SIRAS phases had to be measured in order to solve the crystal structure to 2.4 A resolution. The r.m.s. deviation of C(alpha) atoms is 2.8 A between porcine and bovine BLG. Nevertheless, the typical lipocalin fold is conserved. Compared with bovine BLG, the tilted alpha-helix alters the arrangement of surface residues of the porcine form, completely changing the dimerization behaviour. Through a unique pH-dependent domain-swapping mechanism involving the first ten residues, a novel dimer interface is formed at the N-terminus of porcine BLG. The existence of this novel dimer at low pH is supported by gel-filtration experiments. These results provide a rationale for the difference in physicochemical behaviour between bovine and porcine BLG and point the way towards engineering such dimerization motifs into other members of the lipocalin family.