Fibrillar Hydrogel Based on Cellulose Nanocrystals Crosslinked via Diels-Alder Reaction: Preparation and pH-Sensitive Release of Benzocaine.

A fibrillar hydrogel was obtained by covalent crosslinking via Diels-Alder reaction of two types of cellulose nanocrystals (CNCs) with furan and maleimide groups. Gelation has been studied at various ratios of components and temperatures in the range from 20 to 60 °C. It was shown that the rheological properties of the hydrogel can be optimized by varying the concentration and ratio of components. Due to the rigid structure of the CNCs, the hydrogel could be formed at a concentration of at least 5 wt%; however, it almost does not swell either in water with pH 5 or 7 or in the HBSS buffer. The introduction of aldehyde groups into the CNCs allows for the conjugation of physiologically active molecules containing primary amino groups due to the formation of imine bonds. Here, we used benzocaine as a model drug for conjugation with CNC hydrogel. The resulting drug-conjugated hydrogel demonstrated the stability of formulation at pH 7 and a pH-sensitive release of benzocaine due to the accelerated hydrolytic cleavage of the imine bond at pH < 7. The developed drug-conjugated hydrogel is promising as wound dressings for local anesthesia.

Comparison of Autografts and Biodegradable 3D-Printed Composite Scaffolds with Osteoconductive Properties for Tissue Regeneration in Bone Tuberculosis.

Tuberculosis remains one of the major health problems worldwide. Besides the lungs, tuberculosis affects other organs, including bones and joints. In the case of bone tuberculosis, current treatment protocols include necrectomy in combination with conventional anti-tuberculosis therapy, followed by reconstruction of the resulting bone defects. In this study, we compared autografting and implantation with a biodegradable composite scaffold for bone-defect regeneration in a tuberculosis rabbit model. Porous three-dimensional composite materials were prepared by 3D printing and consisted of poly(ε-caprolactone) filled with nanocrystalline cellulose modified with poly(glutamic acid). In addition, rabbit mesenchymal stem cells were adhered to the surface of the composite scaffolds. The developed tuberculosis model was verified by immunological subcutaneous test, real-time polymerase chain reaction, biochemical markers and histomorphological study. Infected animals were randomly divided into three groups, representing the infection control and two experimental groups subjected to necrectomy, anti-tuberculosis treatment, and plastic surgery using autografts or 3D-composite scaffolds. The lifetime observation of the experimental animals and analysis of various biochemical markers at different time periods allowed the comparison of the state of the animals between the groups. Micro-computed tomography and histomorphological analysis enabled the evaluation of osteogenesis, inflammation and cellular changes between the groups, respectively.

Fibrillar biocompatible colloidal gels based on cellulose nanocrystals and poly(N-isopropylacrylamide) for direct ink writing.

HYPOTHESIS: Hydrogels based on cellulose nanocrystals (CNC) have attracted great interest because of their sustainability, biocompatibility, mechanical strength and fibrillar structure. Gelation of colloidal particles can be induced by the introduction of polymers. Existing examples include gels based on CNC and derivatives of cellulose or poly(vinyl alcohol), however, gel structure and their application for extrusion printing were not shown. Hence, we rationalize formation of colloidal gels based on mixture of poly(N-isopropylacrylamide) (PNIPAM) and CNC and control their structure and mechanical properties by variation of components ratio. EXPERIMENTS: State diagram for colloidal system based on mixture of PNIPAM and CNC were established at 25 and 37 °C. Biocompatibility, fiber diameter and rheological properties of the gels were studied for different PNIPAM/CNC ratio. FINDINGS: We show that depending on the ratio between PNIPAM and CNC, colloidal system could be in sol or gel state at 25 °C and at gel state or phase separated at 37 °C. Physically crosslinked hydrogels were thermosensitive and could reversibly change it transparency from translucent to opaque in biologically relevant temperature range. These colloidal hydrogels were biocompatible, had fibrillar structure and demonstrate shear-thinning behavior, which makes them a promising material for bioapplications related to extrusion printing.

Amphiphilic Polypeptides Obtained by the Post-Polymerization Modification of Poly(Glutamic Acid) and Their Evaluation as Delivery Systems for Hydrophobic Drugs.

Synthetic poly(amino acids) are a unique class of macromolecules imitating natural polypeptides and are widely considered as carriers for drug and gene delivery. In this work, we synthesized, characterized and studied the properties of amphiphilic copolymers obtained by the post-polymerization modification of poly(α,L-glutamic acid) with various hydrophobic and basic L-amino acids and D-glucosamine. The resulting glycopolypeptides were capable of forming nanoparticles that exhibited reduced macrophage uptake and were non-toxic to human lung epithelial cells (BEAS-2B). Moreover, the developed nanoparticles were suitable for loading hydrophobic cargo. In particular, paclitaxel nanoformulations had a size of 170-330 nm and demonstrated a high cytostatic efficacy against human lung adenocarcinoma (A549). In general, the obtained nanoparticles were comparable in terms of their characteristics and properties to those based on amphiphilic (glyco)polypeptides obtained by copolymerization methods.

Preface to "Advances in Bio-Based and Biodegradable Polymeric Composites".

The use of polymers for various purposes is increasing every year [...].

Cholesterol-imprinted macroporous monoliths: Preparation and characterization.

The development of sorbents for selective binding of cholesterol, which is a risk factor for cardiovascular disease, has a great importance for analytical science and medicine. In this work, two series of macroporous cholesterol-imprinted monolithic sorbents differing in the composition of functional monomers (methacrylic acid, butyl methacrylate, 2-hydroxyethyl methacrylate and ethylene dimethacrylate), amount of a template (4, 6 and 8 mol%) used for molecular imprinting, as well as mean pore size were synthesized by in situ free-radical process in stainless steel housing of 50 mm × 4.6 mm i.d. All prepared materials were characterized regarding to their hydrodynamic permeability and porous properties, as well as examined by BET and SEM methods. Imprinting factors, apparent dynamic dissociation constants, the maximum binding capacity, the number of theoretical plates and the height equivalent to a theoretical palate of MIP monoliths at different mobile phase flow rates were determined. The separation of a mixture of structural analogues, namely, cholesterol and prednisolone, was demonstrated. Additionally, the possibility of using the developed monoliths for cholesterol solid-phase extraction from simulated biological solution was shown.

Immobilized enzyme reactors based on monoliths: Effect of pore size and enzyme loading on biocatalytic process.

Macroporous monolithic columns with different mean pore size (from 360 to 2020 nm) and appropriate flow-through properties were synthesized using free radical in situ copolymerization of glycidyl methacrylate, 2-hydroxyethyl methacrylate and ethylene dimethacrylate. In order to predict the composition of porogen mixture to generate the pores in the interested size interval, the Hildebrand theory was used. Ribonuclease A and its specific low- and macromolecular substrates cytidine-2',3'-cyclic monophosphate sodium salt and RNA were applied as model system. The effect of mean pore size of macroporous monoliths used for enzyme immobilization on molecular recognition and biocatalytic characteristics was examined. The monitoring of RNA degradation was performed using anion-exchange HPLC on monolithic CIM DEAE analytical column. The high efficiency of heterogeneous biocatalysts obtained comparatively to the catalytic reaction of RNA degradation in solution was demonstrated. Additionally, the series of six monolithic immobilized enzyme reactors with different amount of biocatalyst was prepared and studied regarding to the biocatalytic properties at recirculation mode at two experimental variants, e.g. (i) fixed range of concentrations of circulated substrate solutions, and (ii) fixed range of substrate/enzyme molar ratios.

Supramolecular Au(I)-Cu(I) Complexes as New Luminescent Labels for Covalent Bioconjugation.

Two new supramolecular organometallic complexes, namely, [Au6Cu2(C2C6H4CHO)6(PPh2C6H4PPh2)3](PF6)2 and [Au6Cu2(C2C6H4NCS)6(PPh2C6H4PPh2)3](PF6)2, with highly reactive aldehyde and isothiocyanate groups have been synthesized and characterized using X-ray crystallography, ESI mass spectrometry, and NMR spectroscopy. The compounds obtained demonstrated bright emission in solution with the excited-state lifetime in microsecond domain both under single- and two-photon excitation. The luminescent complexes were found to be suitable for bioconjugation in aqueous media. In particular, they are able to form the covalent conjugates with proteins of different molecular size (soybean trypsin inhibitor, human serum albumin, rabbit anti-HSA antibodies). The conjugates demonstrated a high level of the phosphorescent emission from the covalently bound label, excellent solubility, and high stability in physiological media. The highest quantum yield, storage stability, and luminance were detected for bioconjugates formed by covalent attachment of the aldehyde-bearing supramolecular Au(I)-Cu(I) complex. The measured biological activity of one of the labeled model proteins clearly showed that introduced label did not prevent the biorecognition and specific protein-protein complex formation that was extremely important for the application of the conjugates in biomolecular detection and imaging.

Xylan degradation improved by a combination of monolithic columns bearing immobilized recombinant ß-xylosidase from Aspergillus awamori X-100 and Grindamyl H121 ß-xylanase.

Synergistic action of exo- and endohydrolazes is preferred for effective destruction of biopolymers. The main purpose of the present work was to develop an efficient tool for degradation of xylan. Macroporous lab-made monolithic columns and commercial CIM-Epoxy disk were used to immobilize the recombinant ß-xylosidase from Aspergillus awamori and Grindamyl ß-xylanase. The efficiency of xylan degradation using the low-loaded ß-xylosidase column appeared to be four times higher than for the in-solution process and about six times higher than for the high-loaded bioreactor. Disk bioreactor with the Grindamil ß-xylanase operated in a recirculation mode has shown noticeable advantages over the column design. Additionally, a system comprised of two immobilized enzyme reactors (IMERs) was tested to accelerate the biopolymer hydrolysis, yielding total xylan conversion into xylose within 20 min. Fast online monitoring HPLC procedure was developed where an analytical DEAE CIM disk was added to the two-enzyme system in a conjoint mode. A loss of activity of immobilized enzymes did not exceed 7% after 5 months of the bioreactor usage. We can therefore conclude that the bioreactors developed exhibit high efficiency and remarkable long-term stability.

Flow-through immobilized enzyme reactors based on monoliths: II. Kinetics study and application.

In the last decade, the application of monolithic materials has rapidly expanded to the realization of flow-through bioconversion processes. Up to these days, different classes of enzymes such as hydrolases, lyases, and oxidoreductases have been immobilized on organic, inorganic, or hybrid monolithic materials to prepare the effective flow-through enzymes reactors for application in proteomics, biotechnology, pharmaceutics, organic synthesis, and biosensoring. Current review describes the results of kinetic study and specialties of flow-through immobilized enzyme reactors based on the existing monolithic materials.

Flow-through immobilized enzyme reactors based on monoliths: I. Preparation of heterogeneous biocatalysts.

The application of monoliths for realization of solid-phase biocatalytic processes was dramatically extended since the beginning of new century. Different enzyme immobilization techniques regarding these modern stationary phases have been developed, adapted, and optimized within last decade. The choice of enzyme immobilization method depends on material nature and monolith manufacturing. The present review collected, analyzed, and discussed the accessible published data on existing approaches and specialties of preparation of flow-through enzyme reactors based on monoliths.

Macroporous methacrylate-based monoliths as platforms for DNA microarrays.

Macroporous monoliths with different surface functionalization (reactive groups) were utilized as platforms for DNA analysis in microarray format. The slides based on a copolymer glycidyl methacrylate-co-ethylene dimethacrylate (GMA-EDMA) have been chosen as well known and thoroughly studied standard. In particular, this material has been used at optimization of DNA microanalytical procedure. The concentration and pH of spotting solution, immobilization temperature and time, blocking agent and coupling reaction duration were selected as varied parameters. The efficiency of analysis performed on 3-D monolithic platforms was compared to that established for commercially available glass slides. As a practical example, a diagnostic test for detection of CFTR gene mutation was carried out. Additionally, the part of presented work was devoted to preparation of aptamer-based test-system that allowed successful and highly sensitive detection both of DNA and protein.

Preparation of methacrylate monoliths.

Rigid macroporous polymers developed in the early 1990s are widely used as efficient stationary phases for all types of chromatographic separations. The main advantages of so-called monolithic supports are their high hydraulic permeability and the dominance of the convection over the diffusion mechanism of mass-exchange under dynamic conditions that allow the separation to be carried out at extremely high flow rates and, consequently, during very short operation times. Among other types of macroporous polymers, the methacrylate-based monolithic materials represent the most popular and successfully explored class of sorbents. This review is an attempt to collect together the contributions of different groups working in the area of monolith preparation. Examples of different methcrylate monomers and crosslinkers, as well as porogenic solvents, including polymer ones, used in monolith preparation are discussed.

Development of multifunctional polymer-mineral composite materials for bone tissue engineering.

The main goal of this article is the development of a novel approach to construct multifunctional composite scaffolds for bone tissue engineering. For this purpose, different kinds of mineral macroporous supports, water-soluble aldehyde-containing copolymers of N-vinylpyrrolidone, as well as different nonspecific and biospecific ligands governing cell adhesion and growth have been used. The composite materials were tested initially for cytotoxicity in cell culture experiments using a model cell line.

Monolithic peptidyl sorbents for comparison of affinity properties of plasminogen activators.

Plasminogen activators are the proteases which convert plasminogen into plasmin dissolving, in its turn, the major component of blood clots, fibrin. They are extremely useful in heart attack therapy. Modern and most appropriate way of scaled up production of these valuable proteins is gene engineering. In this case, a separation and a purification of target product become the important steps of the whole process. Recently developed affinity chromatography on short monolithic columns seems to be a very attractive method for these purposes. High speed of a process prevents the protein's denaturation due to temperature or/and solvents influence. The better mass transfer mechanism (convection rather than diffusion) allows considering only biospecific complexing as time limiting step. Specificity of several synthetic peptides to plasminogen activators have been studied by affinity chromatography on short monolithic columns. Peptide ligands were synthesized by conventional solid phase peptide synthesis (SPPS). The immobilization procedure was carried out as a one step process at static conditions. The results of quantitative evaluation of such affinity interactions were compared with those established for plasminogen that is the natural affinity counterpart to both proteases. Additionally, some of investigated peptides were synthesized directly on GMA-EDMA disks and their affinity properties were compared with those established for the case of immobilized ligands. The possibility of using of synthetic peptidyl ligands for plasminogen activators isolation from native cell supernatant and model protein mixtures has been demonstrated.