Development of genistein-loaded gold nanoparticles and their antitumor potential against prostate cancer cell lines.

Soy isoflavone genistein (Gen) exerts beneficial effects against prostate cancer cells in vitro and in vivo. However, its use as a chemoprevention/therapeutic agent is largely limited due to its low bioavailability. In this study we synthesized two variants of a new delivery system, genistein-gold nanoparticles conjugates Gen@AuNPs1 and Gen@AuNPs2, by an environmentally friendly method, using a dual role of Gen to reduce Au3+ and stabilize the formed AuNPs, with no additional component. The formation of Gen@AuNPs was confirmed via UV-Vis spectroscopy, FTIR, and Raman spectra measurements. The spherical shape and uniform size of Gen@AuNPs1 and Gen@AuNPs2 (10 ± 2 and 23 ± 3 nm, respectively), were determined by transmission electron microscopy. The nano-conjugates also varied in hydrodynamic diameter (65.0 ± 1.7 and 153.0 ± 2.2 nm) but had similar negative zeta potential (-35.0 ± 2.5 and -37.0 ± 1.6 mV), as measured by dynamic light scattering. The Gen loading was estimated to be 46 and 48%, for Gen@AuNPs1 and Gen@AuNPs2, respectively. The antiproliferative activities of GenAuNPs were confirmed by MTT test in vitro on three malignant prostate carcinoma cell lines (PC3, DU 145, and LNCaP), while selectivity toward malignant phenotype was confirmed using non-cancerous MRC-5 cells. Flow cytometric analysis showed that the inhibition on cell proliferation of more potent Gen@AuNPs1 nano-conjugate is comparable with the effects of free Gen. In conclusion, the obtained results, including physicochemical characterization of newly synthesized AuNPs loaded with Gen, cytotoxicity, and IC50 assessments, indicate their stability and bioactivity as an antioxidant and anti-prostate cancer agent, with low toxicity against human primary cells.

Copper-polyaniline nanocomposite: Role of physicochemical properties on the antimicrobial activity and genotoxicity evaluation.

Copper nanoparticles (Cu NPs) have proven to own excellent antimicrobial efficacy, but the problems of easy oxidation and aggregation limit their practical application. Here, nanocomposite based on polyaniline (PANI) and Cu NPs solved this problem and brought additional physicochemical properties that are markedly advantageous for antimicrobial applications. Current work exploits this potential, to examine its time- and concentration-dependent antimicrobial activity, employing E. coli, S. aureus, and C. albicans as a model microbial species. Regarding the presence of polaronic charge carriers in the fibrous polyaniline network, effects of Cu NPs' size and their partially oxidized surfaces (the data were confirmed by HRTEM, FESEM, XRD, Raman and XPS analysis), as well as rapid copper ions release, Cu-PANI nanocomposite showed efficient bactericidal and fungicidal activities at the concentrations ≤1 ppm, within the incubation time of 2 h. Beside the quantitative analysis, the high levels of cellular disruption for all tested microbes were evidenced by atomic force microscopy. Moreover, the minimum inhibitory and bactericidal concentrations of the Cu-PANI nanocomposite were lower than those reported for other nanocomposites. Using such low concentrations is recognized as a good way to avoid its toxicity toward the environment. For this purpose, Cu-PANI nanocomposite is tested for its genotoxicity and influence on the oxidative status of the human cells in vitro.

Interaction of amino acid-functionalized silver nanoparticles and Candida albicans polymorphs: A deep-UV fluorescence imaging study.

The interaction of the tryptophan functionalized Ag nanoparticles and live Candida albicans cells was studied by synchrotron excitation deep-ultraviolet (DUV) fluorescence imaging at the DISCO beamline of Synchrotron SOLEIL. DUV imaging showed that incubation of the fungus with functionalized nanoparticles results in significant increase in the fluorescence signal. The analysis of the images revealed that the interaction of the nanoparticles with (pseudo)hyphae polymorphs of the diploid fungus was less pronounced than in the case of yeast cells or budding spores. The changes in the intensity of the fluorescence signals of the cells after incubation were followed in [327-353nm] and [370-410nm] spectral ranges that correspond to the fluorescence of tryptophan in non-polar and polar environment, respectively. As a consequence of the environmental sensitivity of the silver-tryptophan fluorescent nanoprobe, we were able to determine the possible accumulation sites of the nanoparticles. The analysis of the intensity decay kinetics showed that the photobleaching effects were more pronounced in the case of the functionalized nanoparticle treated cells. The results of time-integrated emission in the mentioned spectral ranges suggested that the nanoparticles penetrate the cells, but that the majority of the nanoparticles attach to the cells' surfaces.

Interfacial Synthesis of Gold-Polyaniline Nanocomposite and Its Electrocatalytic Application.

Gold-polyaniline (Au-PANI) nanocomposite was prepared using a simple interfacial polymerization method, performed in an immiscible water/toluene biphasic system using tetrachloroaurate, AuCl4(-) as an oxidant. The formation of Au nanoparticles (AuNPs) or Au-PANI nanocomposite can be controlled to a certain degree by varying the ratio of initial Au(+) and aniline concentrations. Under optimal condition (HAuCl4/aniline ratio is 1:2), green dispersion of Au-PANI nanocomposite is produced in aqueous phase, whose morphology, structure and physicochemical properties are investigated in details. The nanocomposite shows granular morphology with mostly rodlike AuNPs embedded in polymer. It was found that polyaniline in the composite is in the conducting emeraldine salt form, containing high amount of Au (28.85 wt %). Furthermore, the electrical conductivity of the nanocomposite was found to be four-fold higher than that of the polymer itself. In addition, the nanocomposite powder, isolated from the as-prepared aqueous dispersion, can later be easily redispersed in water and further used for various applications. Moreover, the obtained Au-PANI nanocomposite showed excellent electrocatalytic performance toward the electrochemical oxygen reduction reaction (ORR), with high ORR onset potential and good selectivity. This makes it a promising candidate for a new class of Pt-free ORR catalyst.

Tryptophan-functionalized gold nanoparticles for deep UV imaging of microbial cells.

Biocompatible fluorescent nanostructures were prepared by a functionalization of gold nanoparticles with the amino acid tryptophan. The gold-tryptophan bioconjugates were investigated by TEM and HRTEM and various spectroscopy methods (XPS, FTIR, UV-vis and photoluminescence). It was found that the gold nanoparticles, initially 8 nm in diameter, aggregate in the presence of the amino acid. From the XPS and FTIR spectroscopy results, it was concluded that the tryptophan gold interactions mainly take place via indole and carboxyl groups. Although the indole group is involved in the interaction with the gold surfaces, the tryptophan-gold hybrids showed strong fluorescence due to the presence of multilayers of tryptophan. Deep ultra violet (DUV) imaging performed at the SOLEIL synchrotron showed that it is possible to detect these hybrid nanostructures within Escherichia coli cells.

Nanomaterial with high antimicrobial efficacy--copper/polyaniline nanocomposite.

This study explores different mechanisms of antimicrobial action by designing hybrid nanomaterials that provide a new approach in the fight against resistant microbes. Here, we present a cheap copper-polyaniline (Cu-PANI) nanocomposite material with enhanced antimicrobial properties, prepared by simple in situ polymerization method, when polymer and metal nanoparticles are produced simultaneously. The copper nanoparticles (CuNPs) are uniformly dispersed in the polymer and have a narrow size distribution (dav = 6 nm). We found that CuNPs and PANI act synergistically against three strains, Escherichia coli, Staphylococcus aureus, and Candida albicans, and resulting nanocomposite exhibits higher antimicrobial activity than any component acting alone. Before using the colony counting method to quantify its time and concentration antimicrobial activity, different techniques (UV-visible spectroscopy, transmission electron microscopy, scanning electron microscope, field emission scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectrophotometry, and inductively coupled plasma optical emission spectrometry) were used to identify the optical, structural, and chemical aspects of the formed Cu-PANI nanocomposite. The antimicrobial activity of this nanocomposite shows that the microbial growth has been fully inhibited; moreover, some of the tested microbes were killed. Atomic force microscopy revealed dramatic changes in morphology of tested cells due to disruption of their cell wall integrity after incubation with Cu-PANI nanocomposite.

Sonophotocatalytic degradation of dye C.I. Acid Orange 7 by TiO2 and Ag nanoparticles immobilized on corona pretreated polypropylene non-woven fabric.

This study discusses the possibility of using corona pre-treated polypropylene (PP) non-woven fabric as a support for immobilization of colloidal TiO2 and Ag nanoparticles in order to remove dye C.I. Acid Orange 7 from aqueous solution. Dye removal efficiency by sonocatalysis, photocatalysis and sonophotocatalysis was evaluated on corona pre-treated fabric loaded with TiO2 nanoparticles, corona pre-treated fabric double loaded with TiO2 nanoparticles and corona pre-treated fabrics loaded with TiO2 nanoparticles before and after deposition of Ag nanoparticles. In addition, the stability of PP non-woven fabric during these processes was investigated. The substrates were characterized by SEM, EDX and AAS analyses. The change of the dye concentration was evaluated by UV-VIS spectrophotometry. Unlike sonocatalysis and photocatalysis, complete dye removal from both solution and non-woven fabric was obtained already after 240-270 min of sonophotocatalysis. Corona pre-treated PP non-woven fabric loaded with Ag nanoparticles prior to deposition of TiO2 nanoparticles provided excellent degradation efficiency and superior reusability. Sonophotocatalytic degradation of dye in the presence of all investigated samples was the most prominent in acidic conditions. Although this nanocomposite system ensured fast discoloration of dye solution, TOC values of water measured after sonophotocatalysis were not satisfactory because of PP degradation. Therefore, it is suggested to include TOC evaluation in each case study where different supports for TiO2 nanoparticles are used since these nanoparticles may guarantee the dye removal from solution but the stability of support could be problematic causing even more serious environmental impact.

Optical properties of shaped silver nanoparticles.

The influence of shape and dielectric property of surrounding media on surface plasmon absorption band of silver nanoparticles was studied. Spherical silver nanoparticles (d = 5.6 nm) synthesized in water using NaBH4 as a reducing agent are transferred in non-polar solvent (chloroform) with phase-transfer reagent oleylamine. The absorption spectrum of oleylamine-capped silver nanoparticles dispersed in chloroform shows a strong surface plasmon resonance band that is 19 nm red-shifted compared to unmodified particles in water. The values for peak position and corresponding half widths are compared with theoretical calculations based on Mie theory. Prismatic and plate-like silver nanoparticles were synthesized in water using trisodium citrate as a reducing agent and cetyltrimethylammonium bromide as stabilizer. Due to structural anisotropy of prismatic and plate-like silver nanoparticles three surface plasmon resonance bands were observed in absorption spectrum. Nanocomposites consisting of non-spherical silver nanoparticles and polyvinyl alcohol exhibit different optical properties compared to water colloid. Instead of three surface plasmon bands, nanocomposite film has only one peak at 460 nm. Reason for appearance of single surface plasmon resonance band in nanocomposite film was discussed according to Maxwell-Garnet theory.