One-Dimensional and Two-Dimensional Zn(II) Coordination Polymers with Ditopic Imidazo[1,5-a]pyridine: A Structural and Computational Study.

Zn(II) coordination polymers are being increasingly studied for their stability and properties. Similarly, there is a growing interest in imidazo[1,5-a]pyridine derivatives, which show great potential in luminescence and pharmaceutical applications. In this work, we successfully synthesized and crystallized three new coordination polymers, using Zn(II) as the metallic node, dicarboxylic acids of different length and nature as linkers, and a linear ditopic imidazo[1,5-a]pyridine derivative, to explore the role of this molecule as a propagator of the dimensionality of the structure or as an ancillary ligand. Our work demonstrates the structural capability of imidazo[1,5-a]pyridines in an unexplored domain for this family of ligands. Notably, we observed a pronounced ability of this heterocyclic scaffold to establish π···π interactions in the solid state. The supramolecular π-stacked assemblies were theoretically analyzed using DFT calculations based on model structures.

Mono-, Bis-, and Tris-Chelate Zn(II) Complexes with Imidazo[1,5-a]pyridine: Luminescence and Structural Dependence.

New mono-, bis-, and tris-chelate Zn(II) complexes have been synthesized starting from different Zn(II) salts and employing a fluorescent 1,3-substituted-imidazo[1,5-a]pyridine as a chelating ligand. The products have been characterized by single-crystal X-ray diffraction; mass spectrometry; and vibrational spectroscopy. The optical properties have been investigated to compare the performances of mono-, bis-, and tris-chelate forms. The collected data (in the solid state and in solution) elucidate an important modification of the ligand conformation upon metal coordination; which is responsible for a notable increase in the optical performance. An intense modification of the emission quantum yield along the series in the solid state is observed comparing mono-, bis-, and tris-chelate adducts; independently from the anionic ligand introduced by ionic exchange.

Imidazo[1,5-a]pyridine-Based Fluorescent Probes: A Photophysical Investigation in Liposome Models.

Imidazo[1,5-a]pyridine is a stable scaffold, widely used for the development of emissive compounds in many application fields (e.g., optoelectronics, coordination chemistry, sensors, chemical biology). Their compact shape along with remarkable photophysical properties make them suitable candidates as cell membrane probes. The study of the membrane dynamics, hydration, and fluidity is of importance to monitor the cellular health and to explore crucial biochemical pathways. In this context, five imidazo[1,5-a]pyridine-based fluorophores were synthesized according to a one-pot cyclization between an aromatic ketone and benzaldehyde in the presence of ammonium acetate and acetic acid. The photophysical features of prepared compounds were investigated in several organic solvents and probes 2-4 exhibited the greatest solvatochromic behavior, resulting in a higher suitability as membrane probes. Their interaction with liposomes as artificial membrane model was tested showing a successful intercalation of the probes in the lipid bilayer. Kinetic experiments were carried out and the lipidic phase influence on the photophysical features was evaluated through temperature-dependent experiments. The results herein reported encourage further investigations on the use of imidazo[1,5-a]pyridine scaffold as fluorescent membrane probes.

Quantitative insights on the interaction between metal ions and water kefir grains: kinetics studies and EPR investigations.

Water kefir is an acid, softly alcoholic and fragrant beverage fermented by a stable consortium of multispecies microbial community. Aim of this study was to investigate the ability of water kefir grains to abate significant amounts of heavy metal ions during the preparation of the water kefir beverage and to set up an experimental and analytical methodology based on ICP-OES spectroscopy and ionic chromatography for the evaluation of heavy metal bioaccumulation by water kefir grains. We investigated the absorption kinetics of the process. The use of EPR spectroscopy enabled us to characterize the interaction between water kefir grains and paramagnetic metal ions from the structural viewpoint. Our results highlight significant differences in both the kinetics and the structural aspects of the interaction between distinct metal ions and water kefir grains. They concur clarifying the potential role of water kefir grains as detoxifying agents towards heavy metal ions.

Dipyridylmethane Ethers as Ligands for Luminescent Ir Complexes.

This work reports two new cationic heteroleptic cyclometalated iridium complexes, containing ether derivatives of di(pyridin-2-yl)methanol. The new ligands are based on dipyridin-2-ylmethane and are designed to obtain ether-based intermediates with extended electronic conjugation by insertion of π system such as phenyl, allyl and ethynyl. Different synthetic strategies were employed to introduce these units, as molecular wires, between the dipyridin-2-ylmethane chelating portion and the terminal N-containing functional group, such as amine and carbamide. The corresponding complexes show luminescence in the blue region of the spectrum, lifetimes between 0.6 and 2.1 µs, high quantum yield and good electrochemical behavior. The computational description (DFT) of the electronic structure highlights the key role of the conjugated π systems on optical and electrochemical properties of the final products.

Amyand's hernia during laparoscopy hernioplasty. Case eport

Amyand's hernia refers to a rare occurrence in which the vermiform appendix, either inflamed or normal, happens to be found in an inguinal hernia sac. Due to its rarity and unspecific clinical evidence, it is most commonly presented as an intra-operative finding. A laparoscopic approach becomes both a way to confirm the diagnosis and a therapeutic tool. Case report: We hereby report a case of a 62-year-old patient presenting with an asymptomatic bilateral inguinal hernia, previously treated on his right side in 2011 with an open approach. The elective laparoscopic surgery, during the right groin exploration, revealed a vermiform appendix, with no signs of inflammation, within the hernia sac. . A prosthetic laparoscopic hernioplasty without appendicectomy was performed and both early outpatient follow-up and 30-day outcome demonstrated excellent recovery. Conclusions: Appendicectomy, when necessary, and primary hernia repair at the same time can be safely performed by laparoscopy which may be considered an advantageous management giving its role in diagnosing, in confirming an Amyand's hernia, in exploring the abdominal cavity and in being a therapeutic tool at the same time(AU)

La hernia de Amyand se refiere a una ocurrencia rara en la que el apéndice vermiforme, ya sea inflamado o normal, se encuentra dentro de un saco inguinal herniario. Debido a su rareza y evidencia clínica inespecífica, se presenta más comúnmente como un hallazgo intraoperatorio. Un abordaje laparoscópico se convierte tanto en una forma de confirmar el diagnóstico como en una herramienta terapéutica. Caso clínico: Presentamos un caso de un paciente de 62 años que presenta una hernia inguinal bilateral asintomática, previamente tratada en su lado derecho en 2011 con un abordaje convencional abierto. La cirugía laparoscópica electiva, durante la exploración de la ingle derecha, reveló un apéndice vermiforme, sin signos de inflamación, dentro del saco de la hernia. Se realizó una hernioplastia laparoscópica protésica sin apendicectomía y tanto el seguimiento ambulatorio temprano como el resultado a 30 días demostraron una excelente recuperación. Conclusión: La apendicectomía, cuando es necesario, y la reparación de la hernia primaria al mismo tiempo se pueden realizar de forma segura por laparoscopia que puede considerarse una gestión ventajosa dando su papel en el diagnóstico, en la confirmación de una hernia de Amyand, explorando la cavidad abdominal y siendo una herramienta terapéutica al mismo tiempo(AU)

Bridging Solution and Solid-State Chemistry of Dicyanoaurate: The Case Study of Zn-Au Nucleation Units.

The behavior in solution of the dicyanoaurate anion in the presence of other metal centers has so far been little explored, despite its importance in material science. The design and synthesis of systems with controlled coordination behavior, using chelating ligands and ZnII, has allowed us to detect self-assembly and oligomerization in solution. This phenomenon has been studied with 13C and 1H NMR, absorption and emission UV-vis spectroscopy, ESI-MS, and XAS at both the Au L3-edge and Zn K-edge: all of these techniques confirm the presence of Au-Zn aggregation products. These fragments, resembling structural units in the solid state, reveal that coordination of dicyanoaurate to free sites around metal centers can occur at a lower concentration than those at which crystals start to form and at which aurophilic interactions are observed, forming the connection between solution species and solid-state architectures.

Novel Ligand and Device Designs for Stable Light-Emitting Electrochemical Cells Based on Heteroleptic Copper(I) Complexes.

This work reports on the positive impact of (i) attaching methoxy groups at the ortho position of the bipyridine ligand (6,6'-dimethoxy-2,2'-bipyridine) in heteroleptic copper(I) complexes belonging to the [Cu(bpy)(POP)]+ family, and (ii) a new device design comprising a multilayered architecture to decouple hole/electron injection and transport processes on the performance of light-emitting electrochemical cells (LECs). In short, the substituted complex showed enhanced thermal- and photostability, photoluminescence, and ionic conductivity features in thin films compared to those of the archetypal complex without substitution. These beneficial features led to LECs outperforming reference devices in terms of luminance, stability, and efficacy. Furthermore, a new device design resulted in a 10-fold enhancement of the stability without negatively affecting the other figures of merit. Here, hole/electron injection and transport processes are performed at two different layers, while electron injection and electron-hole recombination occur at the copper(I) complex layer. As such, this work provides further insights into a smart design of N^N ligands for copper(I) complexes, opening the path to a simple device architecture toward an enhanced electroluminescence response.

Natural aldehyde extraction and direct preparation of new blue light-emitting imidazo[1,5-a]pyridine fluorophores.

This work describes the extraction of natural aldehydes and the use of extracts to synthesise new fluorescent imidazo[1,5-a]pyridine derivatives. The characterisation of the extracted aldehydes by different techniques and the optical study of the fluorescent products allow the design of new compounds suitable for pharmaceutical, down-shifting, microscopy and electronic applications. The fluorophores are generated by an easy one-pot cyclisation reaction in mild conditions without catalyst and with only water as by-product.

EPR and photophysical characterization of six bioactive oxidovanadium(IV) complexes in the conditions of in vitro cell tests.

A number of oxidovanadium(IV) complexes have been reported to display anticancer activity. A theranostic approach, based on the simultaneous observation of both the effect of oxidovanadium(IV) complexes on cell viability and the disclosure of their intracellular fate, is possible by using oxidovanadium(IV) complexes functionalized with fluorescent ligands. In the present study we accomplished the characterization of six oxidovanadium(IV) complexes in conditions close to those employed for in vitro administration. In particular, we investigated the light harvesting properties of such complexes in the presence of a dimethylsulphoxide/aqueous buffer mixture, and we found that one complex exhibits a quantum yield suitable for confocal microscopy investigations. EPR investigations in the same conditions provide information about the presence of ligands' substitution processes. Finally, the electrochemical properties of all complexes were determined by cyclic voltammetry. The overall results show that these complexes exhibit an average stability in solution; EPR data confirm that DMSO enter the first coordination sphere of oxidovanadium(IV) and suggest the occurrence of partial ligand substitution in the dimethylsulphoxide/aqueous buffer mixture.

Origin of a counterintuitive yellow light-emitting electrochemical cell based on a blue-emitting heteroleptic copper(i) complex.

This work provides the synthesis, structural characterization, electrochemical and photophysical features, as well as the application in light-emitting electrochemical cells (LECs) of a novel heteroleptic copper(i) complex - [Cu(impy)(POP)][PF6], where impy is 3-(2-methoxyphenyl)-1-(pyridine-2-yl)imidazo[1,5-a]pyridine and POP is bis{2-(diphenylphosphanyl)phenyl}ether. This compound shows blue photoluminescence (PL, λ = 450 nm) in solution and solid-state and excellent redox stability. Despite these excellent features, the electroluminescence (EL) response is located at ∼550 nm. Although the EL spectrum of LECs is typically red-shifted compared to the PL of the electroluminescent material, a shift of ca. 100 nm represents the largest one reported in LECs. To date, the large shift phenomena have been attributed to (i) a change in the nature of the lowest emitting state due to a concentration effect of the films, (ii) a reversible substitution of the ligands due to the weak coordination to the Cu(i), and (iii) a change in the distribution of the excited states due to polarization effects. After having discarded these along with others like the irreversible degradation of the emitter during device fabrication and/or under operation conditions, driving conditions, active layer composition, and changes in the excited states under different external electrical stimuli, we attribute the origin of this unexpected shift to a lack of a thermally activated delayed fluorescence (TADF) process due to the solely ligand-centered character of the excited states. As such, the lack of a charge transfer character in the excited states leads to a blue-fluorescence and yellow-phosphorescence photo- and electro-responses, respectively. This corroborates recent studies focused on the design of TADF for heteroleptic copper(i) complexes. Overall, this work is a clear insight into the design of new copper(i) complexes towards the preparation of blue LECs, which are still unexplored.

Peptide-based affinity media for solid-phase extraction of Ochratoxin A from wine samples: Effect of the solid support on binding properties.

A suitable sample clean up is a key point in the development of an analytical method. Peptide-based affinity media have recently gained attention in the selective extraction of defined target analytes from complex samples. In this paper we investigated the thermodynamic and kinetic binding properties of different stationary phases (Amberlite IRC-50, Lewatit CNP105, Toyopearl CM-650 M, porous silica gel beads and micrometric glass beads) functionalized with a hexapeptide sequence binding the Ochratoxin A. The highest values of the equilibrium binding constant (Keq) and binding site concentration (Bmax) were obtained for Lewatit CNP105 (Keq: 98.1×10(6) M(-1), Bmax: 30.8 µmol/g), followed by Toyopearl and micrometric glass beads, whereas the worst performances were obtained with Amberlite IRC-50 and porous silica gel beads. Also kinetic performances show the same trend. These results highlight that the surface chemical nature has a key role in the binding properties of solid supports used as affinity media for the selective extraction of well-defined target molecules. Finally, Lewatit CNP105 was compared with Amberlite IRC-50 as solid support in SPE extraction of OTA from 14 wine samples fortified with OTA at 2 and 4 µg l(-1) levels. The extracts were analyzed by HPLC with fluorescence detection (λexc 333 nm, λem 460 nm) showing no significant matrix effects, with a LOD and LOQ of 0.45 and 1.5 µgl(-1), respectively, and good recoveries between 71% and 108% for Amberlite IRC-50 and 91% and 101% for Lewatit CNP105. While both supports showed a statistically comparable extraction accuracy, a statistically significant difference was found in terms of extraction precision, confirming that the solid phase based on Lewatit CNP105 performs better than the solid phase based on Amberlite IRC-50.

Photophysics of singlet and triplet intraligand excited states in [ReCl(CO)3(1-(2-pyridyl)-imidazo[1,5-α]pyridine)] complexes.

Excited-state characters and dynamics of [ReCl(CO)3(3-R-1-(2-pyridyl)-imidazo[1,5-α]pyridine)] complexes (abbreviated ReGV-R, R = CH3, Ph, PhBu(t), PhCF3, PhNO2, PhNMe2) were investigated by pico- and nanosecond time-resolved infrared spectroscopy (TRIR) and excited-state DFT and TD-DFT calculations. Near UV excitation populates the lowest singlet state S1 that undergoes picosecond intersystem crossing (ISC) to the lowest triplet T1. Both states are initially formed hot and relax with ∼20 ps lifetime. TRIR together with quantum chemical calculations reveal that S1 is predominantly a ππ* state localized at the 1-(2-pyridyl)-imidazo[1,5-α]pyridine (= impy) ligand core, with impy → PhNO2 and PhNMe2 → impy intraligand charge-transfer contributions in the case of ReGV-PhNO2 and ReGV-PhNMe2, respectively. T1 is predominantly ππ*(impy) in all cases. It follows that excited singlet and corresponding triplet states have to some extent different characters and structures even if originating nominally from the same preponderant one-electron excitations. ISC occurs with a solvent-independent (CH2Cl2, MeCN) 20-30 ps lifetime, except for ReGV-PhNMe2 (10 ps in CH2Cl2, 100 ps in MeCN). ISC is 200-300 times slower than in analogous complexes with low-lying MLCT states. This difference is interpreted in terms of spin-orbit interaction and characters of orbitals involved in one-electron excitations that give rise to S1 and T1 states. ReGV-R present a unique case of octahedral heavy-metal complexes where the S1 lifetime is long enough to allow for separate spectroscopic characterization of singlet and triplet excited states. This study provides an insight into dynamics and intersystem crossing pathways of low-lying singlet and triplet excited states localized at bidentate ligands bound directly to a heavy metal atom. Rather long (1)IL lifetimes indicate the possibility of photonic applications of singlet excited states.

Exploring synthetic pathways to cationic heteroleptic cyclometalated iridium complexes derived from dipyridylketone.

Reactions between 2,2'-dipyridylketone (L1) and different amines gave a series of iminic ligands, and their chemical reductions produced the related amines. The organic ligands were employed in the syntheses of the corresponding new phosphorescent six-member ring bis-cyclometalated heteroleptic iridium(III) complexes of general formula [Ir(ppy)(2)(L)](+) (ppy = 2-phenylpyridine), namely IrLn. The metal complexes containing N-(dipyridin-2-ylmethylene)butan-1-amine (IrL2), N-(dipyridin-2-ylmethyl)butan-1-amine (IrL5), N-(dipyridin-2-ylmethyl)butane-1,4-diamine with amino groups protected by Boc (IrL6-Boc) and TFA (IrL6-TFA), and N-(dipyridin-2-ylmethyl)-N-methylbutan-1-amine (IrL8) were characterized and their electronic and spectroscopic properties interpreted by DFT calculations. Organoiridium complexes containing amines and imines were found to have high and low photoemission quantum yields, respectively, and their features rationalized by quantum mechanic calculations. Some of these complexes show reasonable quantum yields (up to 13%), long lifetime (up to 2.3 µs) and high stability. Complementary and alternative synthetic pathways to get cationic heteroleptic cyclometalated Ir complexes bearing a tethered primary amino group have been explored with the aim to obtain organometallic phosphorescent derivatives suitable for surface functionalization.

Dipyridylketone as a versatile ligand precursor for new cationic heteroleptic cyclometalated iridium complexes.

Three new bis-cyclometalated iridium(III) complexes, of general formula [Ir(2-phenylpyridine)(2)(L)](+), are reported. The compounds contain a dipyridine-type ligand (L) derived from di-2-pyridylketone (dipyridin-2-ylmethanol, 2,2'-(hydrazonomethylene)dipyridine and 3-hydroxy-3,3-di(pyridine-2-yl)propanenitrile) and were synthesized through two different reaction pathways. The alternative synthetic pathway herein proposed, namely the direct reactions on the complex [Ir(2-phenylpyridine)(2)(2,2'-dipyridylketone)](+), overcame the inconveniences encountered with the standard reaction between the dimeric precursor [Ir(2-phenylpyridine)(2)(µ-Cl)](2) and the ancillary ligands (L). The photophysical characterization of the iridium complexes reveals that modifications on the ancillary ligand introduce large changes in the photophysical behaviour of the complexes. High emission quantum yield is associated with the presence of a saturated carbon between the two pyridyl moieties: [Ir(2-phenylpyridine)(2)(2,2'-dipyridylketone)](+) and [Ir(2-phenylpyridine)(2)(2,2'-(hydrazonomethylene)dipyridine)](+) are extremely low emissive, while [Ir(2-phenylpyridine)(2)(dipyridin-2-ylmethanol)](+) and [Ir(2-phenylpyridine)(2)(3-hydroxy-3,3-di(pyridine-2-yl)propanenitrile)](+) are good photoemitters. DFT and TD-DFT calculations confirmed the mixed LC/MLCT character of the excited states involved in the absorption and emission processes and highlighted the role of the π-conjugation between the two subunits of the ancillary ligand in determining the nature of the LUMO.

Cationic heteroleptic cyclometalated iridium complexes with 1-pyridylimidazo[1,5-alpha]pyridine ligands: exploitation of an efficient intersystem crossing.

Luminescent ligands in Ir(III) cyclometalated complexes. The photophysical and photochemical properties of Ir-cyclometalated complexes containing luminescent ligands are evaluated (see figure). Significant admixture between Ir and ligand orbitals induces an efficient intersystem crossing. Photochemical reactions performed in the presence of oxygen lead to new Ir-cyclometalated complexes containing N(amido) groups directly bound to Ir.A series of phosphorescent cyclometalated heteroleptic iridi um(III) phenylpyridinato (ppy) complexes containing luminescent 1-pyridylimidazo[1,5-alpha]pyridine (pip) ligands, namely [Ir(ppy)(2)(pip)](+), have been synthesised, characterised and their electrochemical, photophysical and electronic properties studied. Seven X-ray structures have been resolved. Excitation of [Ir(ppy)(2)(pip)](+) in acetonitrile at room temperature results in a dual luminescence, strongly quenched by O(2). Four complexes show, in absence of O(2), a high-energy emission (assigned to a (3)MLLCT transition) with two maxima in the blue region of the visible spectra, and a second structured emission (assigned largely to a (3)LC pi-pi* transition) centred around lambda=555 nm. Lifetimes of high-energy emissions are between 0.6 and 1.3 mus. Time-dependent density functional calculations combined with the conductor-like polarisable continuum model method, with acetonitrile as solvent, have been used to calculate a series of ground and excited states of the derivatives under investigation, and the transitions compared with the experimental UV/Vis absorption spectra. A quick and efficient photochemical reaction has been observed for these iridium derivatives that leads to the formation of a new class of cyclometalated iridium complexes containing a stable deprotonated amide unusually coordinated to the metal through a nitrogen bond. The synthesis of a (15)N enriched selected ligand has been performed to investigate, by means of NMR, the particular facile route to these new set of derivatives. The electrochemical behaviour of all complexes is also reported.