CoTe2 : A Quantum Critical Dirac Metal with Strong Spin Fluctuations.

Quantum critical points separating weak ferromagnetic and paramagnetic phases trigger many novel phenomena. Dynamical spin fluctuations not only suppress the long-range order, but can also lead to unusual transport and even superconductivity. Combining quantum criticality with topological electronic properties presents a rare and unique opportunity. Here, by means of ab initio calculations and magnetic, thermal, and transport measurements, it is shown that the orthorhombic CoTe2 is close to ferromagnetism, which appears suppressed by spin fluctuations. Calculations and transport measurements reveal nodal Dirac lines, making it a rare combination of proximity to quantum criticality and Dirac topology.

Energy Efficient Neuro-Inspired Phase-Change Memory Based on Ge4 Sb6 Te7 as a Novel Epitaxial Nanocomposite.

Phase-change memory (PCM) is a promising candidate for neuro-inspired, data-intensive artificial intelligence applications, which relies on the physical attributes of PCM materials including gradual change of resistance states and multilevel operation with low resistance drift. However, achieving these attributes simultaneously remains a fundamental challenge for PCM materials such as Ge2 Sb2 Te5 , the most commonly used material. Here bi-directional gradual resistance changes with ≈10× resistance window using low energy pulses are demonstrated in nanoscale PCM devices based on Ge4 Sb6 Te7 , a new phase-change nanocomposite material . These devices show 13 resistance levels with low resistance drift for the first 8 levels, a resistance on/off ratio of ≈1000, and low variability. These attributes are enabled by the unique microstructural and electro-thermal properties of Ge4 Sb6 Te7 , a nanocomposite consisting of epitaxial SbTe nanoclusters within the Ge-Sb-Te matrix, and a higher crystallization but lower melting temperature than Ge2 Sb2 Te5 . These results advance the pathway toward energy-efficient analog computing using PCM.

Valley phenomena in the candidate phase change material WSe2(1-x)Te2x.

Alloyed transition metal dichalcogenides provide an opportunity for coupling band engineering with valleytronic phenomena in an atomically-thin platform. However, valley properties in alloys remain largely unexplored. We investigate the valley degree of freedom in monolayer alloys of the phase change candidate material WSe2(1-x)Te2x. Low temperature Raman measurements track the alloy-induced transition from the semiconducting 1H phase of WSe2 to the semimetallic 1Td phase of WTe2. We correlate these observations with density functional theory calculations and identify new Raman modes from W-Te vibrations in the 1H-phase alloy. Photoluminescence measurements show ultra-low energy emission features that highlight alloy disorder arising from the large W-Te bond lengths. Interestingly, valley polarization and coherence in alloys survive at high Te compositions and are more robust against temperature than in WSe2. These findings illustrate the persistence of valley properties in alloys with highly dissimilar parent compounds and suggest band engineering can be utilized for valleytronic devices.

Growth Kinetics and Atomistic Mechanisms of Native Oxidation of ZrSxSe2-x and MoS2 Crystals.

A thorough understanding of native oxides is essential for designing semiconductor devices. Here, we report a study of the rate and mechanisms of spontaneous oxidation of bulk single crystals of ZrSxSe2-x alloys and MoS2. ZrSxSe2-x alloys oxidize rapidly, and the oxidation rate increases with Se content. Oxidation of basal surfaces is initiated by favorable O2 adsorption and proceeds by a mechanism of Zr-O bond switching, that collapses the van der Waals gaps, and is facilitated by progressive redox transitions of the chalcogen. The rate-limiting process is the formation and out-diffusion of SO2. In contrast, MoS2 basal surfaces are stable due to unfavorable oxygen adsorption. Our results provide insight and quantitative guidance for designing and processing semiconductor devices based on ZrSxSe2-x and MoS2 and identify the atomistic-scale mechanisms of bonding and phase transformations in layered materials with competing anions.

Localized Excitons in NbSe2-MoSe2 Heterostructures.

Neutral and charged excitons (trions) in atomically thin materials offer important capabilities for photonics, from ultrafast photodetectors to highly efficient light-emitting diodes and lasers. Recent studies of van der Waals (vdW) heterostructures comprised of dissimilar monolayer materials have uncovered a wealth of optical phenomena that are predominantly governed by interlayer interactions. Here, we examine the optical properties in NbSe2-MoSe2 vdW heterostructures, which provide an important model system to study metal-semiconductor interfaces, a common element in optoelectronics. Through low-temperature photoluminescence (PL) microscopy, we discover a sharp emission feature, L1, that is localized at the NbSe2-capped regions of MoSe2. L1 is observed at energies below the commonly studied MoSe2 excitons and trions and exhibits temperature- and power-dependent PL consistent with exciton localization in a confining potential. This PL feature is robust, observed in a variety of samples fabricated with different stacking geometries and cleaning procedures. Using first-principles calculations, we reveal that the confinement potential required for exciton localization naturally arises from the in-plane band bending due to the changes in the electron affinity between pristine MoSe2 and NbSe2-MoSe2 heterostructure. We discuss the implications of our studies for atomically thin optoelectronics devices with atomically sharp interfaces and tunable electronic structures.

Increased Transfer Efficiency from Molecular Photonic Wires on Solid Substrates and Cryogenic Conditions.

Molecular photonic wires (MPWs) are tunable nanophotonic structures capable of capturing and directing light with high transfer efficiencies. DNA-based assembly techniques provide a simple and economical preparation method for MPWs that allows precise positioning of the molecular transfer components. Unfortunately, the longest DNA-based MPWs (∼30 nm) report only modest transfer efficiencies of ∼2% and have not been demonstrated on solid-state platforms. Here, we demonstrate that DNA-based MPWs can be spin-coated in a polymer matrix onto silicon wafers and exhibit a 5-fold increase in photonic transfer efficiency over solution-phase MPWs. Cooling these MPWs to 5 K led to further efficiency increases ranging from ∼40 to 240% depending on the length of the MPW. The improvement of MPW energy transport efficiencies advances prospects for their incorporation in a variety of optoelectronics technologies and makes them an ideal test bed for further exploration of nanoscale energy transfer.

The structural phases and vibrational properties of Mo1-xWxTe2 alloys.

The structural polymorphism in transition metal dichalcogenides (TMDs) provides exciting opportunities for developing advanced electronics. For example, MoTe2 crystallizes in the 2H semiconducting phase at ambient temperature and pressure, but transitions into the 1T' semimetallic phase at high temperatures. Alloying MoTe2 with WTe2 reduces the energy barrier between these two phases, while also allowing access to the T d Weyl semimetal phase. The Mo1-x WxTe2 alloy system is therefore promising for developing phase change memory technology. However, achieving this goal necessitates a detailed understanding of the phase composition in the MoTe2-WTe2 system. We combine polarization-resolved Raman spectroscopy with x-ray diffraction (XRD) and scanning transmission electron microscopy (STEM) to study bulk Mo1-xWxTe2 alloys over the full compositional range x from 0 to 1. We identify Raman and XRD signatures characteristic of the 2H, 1T', and T d structural phases that agree with density-functional theory (DFT) calculations, and use them to identify phase fields in the MoTe2-WTe2 system, including single-phase 2H, 1T', and T d regions, as well as a two-phase 1T' + T d region. Disorder arising from compositional fluctuations in Mo1-xWxTe2 alloys breaks inversion and translational symmetry, leading to the activation of an infrared 1T'-MoTe2 mode and the enhancement of a double-resonance Raman process in 2H-Mo1-x WxTe2 alloys. Compositional fluctuations limit the phonon correlation length, which we estimate by fitting the observed asymmetric Raman lineshapes with a phonon confinement model. These observations reveal the important role of disorder in Mo1-xWxTe2 alloys, clarify the structural phase boundaries, and provide a foundation for future explorations of phase transitions and electronic phenomena in this system.

Characterization of Few-Layer 1T' MoTe2 by Polarization-Resolved Second Harmonic Generation and Raman Scattering.

We study the crystal symmetry of few-layer 1T' MoTe2 using the polarization dependence of the second harmonic generation (SHG) and Raman scattering. Bulk 1T' MoTe2 is known to be inversion symmetric; however, we find that the inversion symmetry is broken for finite crystals with even numbers of layers, resulting in strong SHG comparable to other transition-metal dichalcogenides. Group theory analysis of the polarization dependence of the Raman signals allows for the definitive assignment of all the Raman modes in 1T' MoTe2 and clears up a discrepancy in the literature. The Raman results were also compared with density functional theory simulations and are in excellent agreement with the layer-dependent variations of the Raman modes. The experimental measurements also determine the relationship between the crystal axes and the polarization dependence of the SHG and Raman scattering, which now allows the anisotropy of polarized SHG or Raman signal to independently determine the crystal orientation.

Spin-cavity interactions between a quantum dot molecule and a photonic crystal cavity.

The integration of InAs/GaAs quantum dots into nanophotonic cavities has led to impressive demonstrations of cavity quantum electrodynamics. However, these demonstrations are primarily based on two-level excitonic systems. Efforts to couple long-lived quantum dot electron spin states with a cavity are only now succeeding. Here we report a two-spin-cavity system, achieved by embedding an InAs quantum dot molecule within a photonic crystal cavity. With this system we obtain a spin singlet-triplet Λ-system where the ground-state spin splitting exceeds the cavity linewidth by an order of magnitude. This allows us to observe cavity-stimulated Raman emission that is highly spin-selective. Moreover, we demonstrate the first cases of cavity-enhanced optical nonlinearities in a solid-state Λ-system. This provides an all-optical, local method to control the spin exchange splitting. Incorporation of a highly engineerable quantum dot molecule into the photonic crystal architecture advances prospects for a quantum network.

Ultrafast electron trapping in ligand-exchanged quantum dot assemblies.

We use time-integrated and time-resolved photoluminescence and absorption to characterize the low-temperature optical properties of CdSe quantum dot solids after exchanging native aliphatic ligands for thiocyanate and subsequent thermal annealing. In contrast to trends established at room temperature, our data show that at low temperature the band-edge absorptive bleach is dominated by 1S3/2h hole occupation in the quantum dot interior. We find that our ligand treatments, which bring enhanced interparticle coupling, lead to faster surface state electron trapping, a greater proportion of surface-related photoluminescence, and decreased band-edge photoluminescence lifetimes.

Leveraging crystal anisotropy for deterministic growth of InAs quantum dots with narrow optical linewidths.

Crystal growth anisotropy in molecular beam epitaxy usually prevents deterministic nucleation of individual quantum dots when a thick GaAs buffer is grown over a nanopatterned substrate. Here, we demonstrate how this anisotropy can actually be used to mold nucleation sites for single dots on a much thicker buffer than has been achieved by conventional techniques. This approach greatly suppresses the problem of defect-induced line broadening for single quantum dots in a charge-tunable device, giving state-of-the-art optical linewidths for a system widely studied as a spin qubit for quantum information.

Influence of probe pressure on the diffuse correlation spectroscopy blood flow signal: extra-cerebral contributions.

A pilot study explores relative contributions of extra-cerebral (scalp/skull) versus brain (cerebral) tissues to the blood flow index determined by diffuse correlation spectroscopy (DCS). Microvascular DCS flow measurements were made on the head during baseline and breath-holding/hyperventilation tasks, both with and without pressure. Baseline (resting) data enabled estimation of extra-cerebral flow signals and their pressure dependencies. A simple two-component model was used to derive baseline and activated cerebral blood flow (CBF) signals, and the DCS flow indices were also cross-correlated with concurrent Transcranial Doppler Ultrasound (TCD) blood velocity measurements. The study suggests new pressure-dependent experimental paradigms for elucidation of blood flow contributions from extra-cerebral and cerebral tissues.

Binary nanocrystal superlattice membranes self-assembled at the liquid-air interface.

The spontaneous organization of multicomponent micrometre-sized colloids or nanocrystals into superlattices is of scientific importance for understanding the assembly process on the nanometre scale and is of great interest for bottom-up fabrication of functional devices. In particular, co-assembly of two types of nanocrystal into binary nanocrystal superlattices (BNSLs) has recently attracted significant attention, as this provides a low-cost, programmable way to design metamaterials with precisely controlled properties that arise from the organization and interactions of the constituent nanocrystal components. Although challenging, the ability to grow and manipulate large-scale BNSLs is critical for extensive exploration of this new class of material. Here we report a general method of growing centimetre-scale, uniform membranes of BNSLs that can readily be transferred to arbitrary substrates. Our method is based on the liquid-air interfacial assembly of multicomponent nanocrystals and circumvents the limitations associated with the current assembly strategies, allowing integration of BNSLs on any substrate for the fabrication of nanocrystal-based devices. We demonstrate the construction of magnetoresistive devices by incorporating large-area (1.5 mm x 2.5 mm) BNSL membranes; their magnetotransport measurements clearly show that device magnetoresistance is dependent on the structure (stoichiometry) of the BNSLs. The ability to transfer BNSLs also allows the construction of free-standing membranes and other complex architectures that have not been accessible previously.