Estrogen-, androgen- and aryl hydrocarbon receptor mediated activities in passive and composite samples from municipal waste and surface waters.

Passive and composite sampling in combination with in vitro bioassays and identification and quantification of individual chemicals were applied to characterize pollution by compounds with several specific modes of action in urban area in the basin of two rivers, with 400,000 inhabitants and a variety of industrial activities. Two types of passive samplers, semipermeable membrane devices (SPMD) for hydrophobic contaminants and polar organic chemical integrative samplers (POCIS) for polar compounds such as pesticides and pharmaceuticals, were used to sample wastewater treatment plant (WWTP) influent and effluent as well as rivers upstream and downstream of the urban complex and the WWTP. Compounds with endocrine disruptive potency were detected in river water and WWTP influent and effluent. Year-round, monthly assessment of waste waters by bioassays documented estrogenic, androgenic and dioxin-like potency as well as cytotoxicity in influent waters of the WWTP and allowed characterization of seasonal variability of these biological potentials in waste waters. The WWTP effectively removed cytotoxic compounds, xenoestrogens and xenoandrogens. There was significant variability in treatment efficiency of dioxin-like potency. The study indicates that the WWTP, despite its up-to-date technology, can contribute endocrine disrupting compounds to the river. Riverine samples exhibited dioxin-like, antiestrogenic and antiandrogenic potencies. The study design enabled characterization of effects of the urban complex and the WWTP on the river. Concentrations of PAHs and contaminants and specific biological potencies sampled by POCIS decreased as a function of distance from the city.

Changes in concentrations of hydrophilic organic contaminants and of endocrine-disrupting potential downstream of small communities located adjacent to headwaters.

Endocrine-disruptive potential and concentrations of polar organic contaminants were measured in seven headwaters flowing through relatively unpolluted areas of the Czech Republic. Towns with Wastewater Treatment Plant (WWTP) discharges were the first known sources of anthropogenic pollution in the areas. River water was sampled several kilometers upstream (US) and several tens of meters downstream (DS) of the WWTP discharges, by use of Pesticide and Pharmaceutical Polar Organic Integrative Samplers (POCIS-Pest, POCIS-Pharm). Extracts of passive samplers were tested by use of a battery of in vitro bioassays to determine overall non-specific cytotoxicity, endocrine-disruptive (ED) potential and dioxin-like toxicity. The extracts were also used for quantification of polar organics. There was little toxicity to cells caused by most extracts of POCIS. Estrogenicity was detected in all types of samples even though US locations are considered to be background. At US locations, concentrations of estrogen equivalents (EEq) ranged from less than the detection limits (LOD) to 0.5 ng EEq/POCIS. Downstream concentrations of EEqs ranged from less than LOD to 4.8 ng EEq/POCIS. Concentrations of EEq in POCIS extracts from all DS locations were 1 to 14 times greater than those at US locations. Concentrations of EEq measured in extracts of POCIS-Pest and POCIS-Pharm were in a good agreement. Neither antiestrogenic nor anti/androgenic activities were detected. Concentrations of 2,3,7,8-TCDD equivalents (TEq(bio)) were detected in both types of POCIS at concentrations ranging from less than the LOD to 0.39 ng TEq(bio)/POCIS. Nearly all extracts of POCIS-Pharm contained greater concentrations of TEq(bio) activity than extracts of POCIS-Pest. Concentrations of pesticides and pharmaceuticals in extracts of POCIS were generally small at all sampling sites, but levels of some pharmaceuticals were significantly greater in both types of POCIS from DS locations. Chemical analyses along with the results of bioassays documented impacts of small towns with WWTPs on headwaters.

Passive samplers for chemical substance monitoring and associated toxicity assessment in water.

The European legislation, and in particular the Water Framework Directive requires the development of cost efficient monitoring tools that can provide the required information for the assessment of water contamination. Passive sampling methods represent one of the novel tools that have a potential to be used in various regulatory monitoring programmes aimed at assessing the levels of chemical pollutants. These methods are particularly interesting for sampling polar organic pollutants in water because they provide representative information of the water quality over extended time periods (days to weeks) in environments with fluctuating contaminant concentrations. This is achieved by integrative sampling of pollutants over the whole sampler deployment period. These tools can be coupled to toxicity testing using bioassays that give information on toxic and ecotoxic hazards associated to substances that are present, these substances being identified or not. In this study the polar organic chemical integrative sampler (POCIS) was used in surface water to evaluate the water contamination by polar organic compounds and their potential toxicity.

Calibration and use of the Chemcatcher passive sampler for monitoring organotin compounds in water.

An integrative passive sampler (Chemcatcher) consisting of a 47 mm C18 Empore disk as the receiving phase overlaid with a thin cellulose acetate diffusion membrane was developed and calibrated for the measurement of time-weighted average water concentrations of organotin compounds [monobutyltin (MBT), dibutyltin (DBT), tributlytin (TBT) and triphenyltin (TPhT)] in water. The effect of water temperature and turbulence on the uptake rate of these analytes was evaluated in the laboratory using a flow-through tank. Uptake was linear over a 14-day period being in the range: MBT (3-23 mL day(-1)), DBT (40-200 mL day(-1)), TBT (30-200 mL day(-1)) and TPhT (30-190 mL day(-1)) for all the different conditions tested. These sampling rates were high enough to permit the use of the Chemcatcher to monitor levels of organotin compounds typically found in polluted aquatic environments. Using gas chromatography (GC) with either ICP-MS or flame photometric detection, limits of detection for the device (14-day deployment) for the different organotin compounds in water were in the range of 0.2-7.5 ng L(-1), and once accumulated in the receiving phase the compounds were stable over prolonged periods. Due to anisotropic exchange kinetics, performance reference compounds could not be used with this passive sampling system to compensate for changes in sampling rate due to variations in water temperature, turbulence and biofouling of the surface of the diffusion membrane during field deployments. The performance of the Chemcatcher was evaluated alongside spot water sampling in Alicante Habour, Spain which is known to contain elevated levels of organotin compounds. The samplers provided time-weighted average concentrations of the bioavailable fractions of the tin compounds where environmental concentrations fluctuated markedly in time.

Dialysis of persistent organic pollutants and polycyclic aromatic hydrocarbons from semipermeable membranes. A procedure using an accelerated solvent extraction device.

Accelerated solvent extraction (ASE) is one of the most recent solid-phase extraction methods and has caught on all over the world in numerous laboratories. Until now it was not known that this device is also very suitable for performing dialysis. In this study, development of a rapid dialysis procedure (RDP) was described that is based on the dialysis of persistent organic xenobiotics from triolein-containing semipermeable membrane devices (SPMDs) using ASE. All the operating parameters were optimized within the framework of usage. The RDP procedure was compared with the conventional dialytic recovery of target analytes under atmospheric pressure using spiked analytes and real field samples of SPMDs exposed to urban air. The main advantages of the RDP in comparison to the conventional dialysis are the speed, with up to 70 times faster taking only 40 min, and the considerable reduction in solvent consumption (by two-thirds) when SPMDs with standard configuration are used. Moreover, the RDP is also suitable as an analytical cleanup procedure for the same analytes from various types of lipid samples and other difficult matrixes using semipermeable membranes.

Membrane-enclosed sorptive coating. an integrative passive sampler for monitoring organic contaminants in water.

An integrative sampler that consists of a bar coated with poly(dimethylsiloxane) (PDMS) enclosed in a dialysis membrane bag has been developed combining the advantages of the passive sampling approach with solventless preconcentration of organic solutes from aqueous matrixes and subsequent desorption of the sequestered analytes on-line with a capillary GC/MS system. The performance of the sampler was tested for integrative sampling of hydrophobic persistent organic pollutants including gamma-hexachlorocyclohexane, hexachlorobenzene, 2,2'-bis(4-chlorophenyl)-1,1'-dichloroethylene, polycyclic aromatic hydrocarbons, and polychlorinated biphenyls in the laboratory in a continuous-flow system. Linear uptake of all test analytes during exposure periods up to one week has been observed, and concentration proportionality of response of the sampler has been demonstrated. Over the range of controlled laboratory conditions, the magnitude of sampling rate values varied from 47 to 700 microL h(-1) per sampler. The uptake rate of chemicals was dependent on their molecular mass, as well as on the partition coefficient between the PDMS and water. A decrease in sampling rates with decreasing water temperature was observed. The sampling device has the potential to detect low aqueous concentrations (ng to pg L(-1)) of test substances.

Use of semipermeable membrane devices (SPMDs). Determination of bioavailable, organic, waterborne contaminants in the industrial region of Bitterfeld, Saxony-Anhalt, Germany.

Triolein-containing semipermeable membrane devices (SPMDs) were employed as passive samplers to provide data on the bioavailable fraction of organic, waterborne, organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polynuclear aromatic hydrocarbons (PAHs) in streams flowing through a highly polluted industrial area of Bitterfeld in Saxony-Anhalt, Germany. The contamination of the region with organic pollutants originates in wastewater effluents from the chemical industry, from over one-hundred years of lignite exploitation, and from chemical waste dumps. The main objective was to characterise time-integrated levels of dissolved contaminants, to use them for identification of spatial trends of contamination, and their relationship to potential pollution sources. SPMDs were deployed for 43 days in the summer of 1998 at four sampling sites. The total concentration of pollutants at sampling sites was found to range from a low of 0.8 microgram/SPMD to 25 micrograms/SPMD for PAHs, and from 0.4 microgram/SPMD to 22 micrograms/SPMD for OCPs, respectively. None of the selected PCB congeners was present at quantifiable levels at any sampling site. A point source of water pollution with OCPs and PAHs was identified in the river system considering the total contaminant concentrations and the distribution of individual compounds accumulated by SPMDs at different sampling sites. SPMD-data was also used to estimate average ambient water concentrations of the contaminants at each field site and compared with concentrations measured in bulk water extracts. The truly dissolved or bioavailable portion of contaminants at different sampling sites ranged from 4% to 86% for the PAHs, and from 8% to 18% for the OCPs included in the estimation. The fraction of individual compounds found in the freely dissolved form can be attributed to the range of their hydrophobicity. In comparison with liquid/liquid extraction of water samples, the SPMD method is more suitable for an assessment of the background concentrations of hydrophobic organic contaminants because of substantially lower method quantification limits. Moreover, contaminant residues sequestered by the SPMDs represent an estimation of the dissolved or readily bioavailable concentration of hydrophobic contaminants in water, which is not provided by most analytical approaches.

Polyaromatic hydrocarbon concentrations and patterns in sediments and surface water of the Mansfeld region, Saxony-Anhalt, Germany.

The composition and spatial distribution of polyaromatic hydrocarbons (PAHs) and their relation to potential pollution sources were investigated in the Böse Sieben Creek, Saxony-Anhalt, Germany, using two techniques: semipermeable membrane devices (SPMDs) and sediment analysis. SPMD is an integrative device that passively samples hydrophobic chemicals of low to moderate molecular weight (< 600 Da) in water. SPMDs were placed in water for 34 days at three sites where sediments were also sampled. Fifteen PAHs were determined in SPMDs and in sediment samples to evaluate the concentration levels and specific PAH patterns. Time-weighted average aqueous PAH concentrations were estimated from the PAH amount accumulated in SPMDs during the deployment period using previously reported sampling rates. Sediment-water partition coefficients were used to estimate PAH concentrations in pore water from sediments. Calculated pore water concentrations were, on average, almost three orders of magnitude higher than those calculated from SPMDs. Thus, in addition to contamination from other sources, the water concentration at the sampling sites might be elevated due to contaminant mobilization from historically contaminated sediments. Relative PAH patterns from SPMDs and sediment were compared using principal component analysis, and were correlated with the PAH patterns from different potential contamination sources, including Theisen sludge, one of the by-products of the smelting process for copper production in the region in the past, which is likely to be the main contamination source of PAHs. Moreover, three origin indices (concentration ratios of PAH isomer pairs) were used to evaluate the suitability of these compounds as tracers to distinguish between the contamination arising from different sources. The evaluation of contaminant patterns permits the conclusion that the PAHs are of pyrolytic, industrial origin, possibly including contamination by Theisen sludge, and rules out a petrogenic source for the hydrocarbons.

A kinetic distribution model of evaporation, biosorption and biodegradation of polychlorinated biphenyls (PCBs) in the suspension of Pseudomonas stutzeri.

Kinetics of distribution of PCBs in an active bacterial suspension of Pseudomonas stutzeri was studied by monitoring the evaporated amounts and the concentration remaining in the liquid medium with the biomass. To determine the biodegradation rate constants of the individual congeners of the PCB formulation Delor 103, a model considering biosorption, evaporation, and primary biodegradation constructed previously was used. Rate constants of biodegradation imply that biodegradation of individual congeners is structure-dependent process. Biodegradability decreases with increasing number of chlorine substituents in the molecule, especially if they are in the ortho and para positions. On the other hand, the increasing number of free ortho and meta positions in the biphenyl molecule leads to better biodegradability. For a simple empirical determination of the influence of the chlorine substitution pattern on biodegradability, the di- and trichlorobiphenyl rate constants of biodegradation were analysed.

Effect of chlorobenzoates on the degradation of polychlorinated biphenyls (PCB) by Pseudomonas stutzeri.

Chlorobenzoic acids (CBA) are frequently dead-end products of partial aerobic biodegradation of polychlorinated biphenyls (PCB). When CBA produced from PCB accumulate in the growth medium, they can inhibit the bacterial growth and consequently, slow down PCB biodegradation. In this study, the effects of seven mono- and dichlorinated CBA on growth of Pseudomonas stutzeri on different substrates and on the PCB degradation by this strain in a liquid mineral medium were tested. 3-CBA was the strongest growth inhibitor for P. stutzeri growing on glucose, benzoate and biphenyl. It was found to inhibit heavily the elimination of some di- and trichlorinated biphenyls. In contrast, its influence on the elimination of more chlorinated congeners was much less significant.

Degradation of PCB in different soils by inoculated Alcaligenes xylosoxidans.

The degradation of PCB in soils by the biphenyl-utilising strain Alcaligenes xylosoxidans was studied in different soil types. In addition to the congener specificity, significant differences in the degradation of PCB by the strain in the different soil types were observed. Efficiency of degradation was generally better in sterilised soils, but the differences were not as significant as the differences observed between different soil types. These results indicate that the degradation of PCB is probably related not only to the capabilities of the strain employed and quality and amount of competitive species inhabiting the soils, but also to the soil sorption of the PCB congeners. Degradation is faster in the soils containing an intermediate amount of organic carbon with a high portion of total and aromatic carbon in humic acids.