Measurement of Water Uptake and States in Nafion Membranes Using Humidity-Controlled Terahertz Time-Domain Spectroscopy.

Perfluorinated sulfonic acid ionomers are well known for their unique water uptake properties and chemical/mechanical stability. Understanding their performance-stability trade-offs is key to realizing membranes with optimal properties. Terahertz time-domain spectroscopy has been demonstrated to resolve water states inside industrially relevant membranes, producing qualitatively agreeable results to conventional gravimetric analysis and prior demonstrations. Using the proposed humidity-controlled terahertz time-domain spectroscopy, here we quantify this detailed water information inside commercially available Nafion membranes at various humidities for direct comparison against literature values from dynamic vapor sorption, differential scanning calorimetry, and Fourier transform infrared spectroscopy on selected samples. Using this technique therefore opens up opportunities for rapid future parameter space investigation for membrane optimization.

Surface Analysis of Pristine and Cycled NMC/Graphite Lithium-Ion Battery Electrodes: Addressing the Measurement Challenges.

Lithium-ion batteries are the most ubiquitous energy storage devices in our everyday lives. However, their energy storage capacity fades over time due to chemical and structural changes in their components, via different degradation mechanisms. Understanding and mitigating these degradation mechanisms is key to reducing capacity fade, thereby enabling improvement in the performance and lifetime of Li-ion batteries, supporting the energy transition to renewables and electrification. In this endeavor, surface analysis techniques are commonly employed to characterize the chemistry and structure at reactive interfaces, where most changes are observed as batteries age. However, battery electrodes are complex systems containing unstable compounds, with large heterogeneities in material properties. Moreover, different degradation mechanisms can affect multiple material properties and occur simultaneously, meaning that a range of complementary techniques must be utilized to obtain a complete picture of electrode degradation. The combination of these issues and the lack of standard measurement protocols and guidelines for data interpretation can lead to a lack of trust in data. Herein, we discuss measurement challenges that affect several key surface analysis techniques being used for Li-ion battery degradation studies: focused ion beam scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and time-of-flight secondary ion mass spectrometry. We provide recommendations for each technique to improve reproducibility and reduce uncertainty in the analysis of NMC/graphite Li-ion battery electrodes. We also highlight some key measurement issues that should be addressed in future investigations.

Atom-efficient synthesis of a benchmark electrolyte for magnesium battery applications.

The benchmark magnesium electrolyte, [Mg2Cl3]+ [AlPh4]-, can be prepared in a 100% atom-economic fashion by a ligand exchange reaction between AlCl3 and two molar equivalents of MgPh2. NMR and vibrational spectroscopy indicate that the reported approach results in a simpler ionic composition than the more widely adopted synthesis route of combining PhMgCl with AlCl3. Electrochemical performance has been validated by polarisation tests and cyclic voltammetry, which demonstrate excellent stability of electrolytes produced via this atom-efficient approach.

Methodologies for Operando ATR-IR Spectroscopy of Magnesium Battery Electrolytes.

We explore the suitability of operando attenuated total reflection infrared (ATR-IR) spectroscopy methodologies for the study of organoaluminate electrolytes for Mg battery applications. The "all-phenyl complex" in tetrahydrofuran (THF), with the molecular structure [Mg2Cl3·6THF]+[AlPh4]-, is used as an exemplar electrolyte to compare two different spectroelectrochemical cell configurations. In one case, a Pt gauze is used as a working electrode, while in the second case, a thin (∼10 nm) Pt film working electrode is deposited directly on the surface of the ATR crystal. Spectroscopic measurements indicate substantial differences in the ATR-IR response for the two configurations, reflecting the different spatial arrangements of the working electrode with respect to the ATR sampling volume. The relative merits and potential pitfalls associated with the two approaches are discussed.

A universal polymer shell-isolated nanoparticle (SHIN) design for single particle spectro-electrochemical SERS sensing using different core shapes.

Shell-isolated nanoparticles (SHINs) have attracted increasing interest for non-interfering plasmonic enhanced sensing in fields such as materials science, biosensing, and in various electrochemical systems. The metallic core of these nanoparticles is isolated from the surrounding environment preventing direct contact or chemical interaction with the metal surface, while still being close enough to enable localized surface plasmon enhancement of the Raman scattering signal from the analyte. This concept forms the basis of the shell isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) technique. To date, the vast majority of SHIN designs have focused on SiO2 shells around spherical nanoparticle cores and there has been very limited published research considering alternatives. In this article, we introduce a new polymer-based approach which provides excellent control over the layer thickness and can be applied to plasmonic metal nanoparticles of various shapes and sizes without compromising the overall nanoparticle morphology. The SHIN layers are shown to exhibit excellent passivation properties and robustness in the case of gold nanosphere (AuNP) and anisotropic gold nanostar (AuNS) core shapes. In addition, in situ SHINERS spectro-electrochemistry measurements performed on both SHIN and bare Au nanoparticles demonstrate the utility of the SHIN coatings. Correlated confocal Raman and SEM mapping was achieved to clearly establish single nanoparticle SERS sensitivity. Finally, confocal in situ SERS mapping enabled visualisation of the redox related molecular structure changes occurring on an electrode surface in the vicinity of individual SHIN-coated nanoparticles.

Electrocatalytic Behavior of PtCu Clusters Produced by Nanoparticle Beam Deposition.

State-of-the-art electrocatalysts for electrolyzer and fuel cell applications currently rely on platinum group metals, which are costly and subject to supply risks. In recent years, a vast collection of research has explored the possibility of reducing the Pt content in such catalysts by alloying with earth-abundant and cheap metals, enabling co-optimization of cost and activity. Here, using nanoparticle beam deposition, we explore the electrocatalytic performance of PtCu alloy clusters in the hydrogen evolution reaction (HER). Elemental compositions of the produced bimetallic clusters were shown by X-ray photoelectron spectroscopy (XPS) to range from 2 at. % to 38 at. % Pt, while high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) combined with energy dispersive X-ray (EDX) spectroscopy indicated that the predominant cluster morphologies could be characterized as either a fully mixed alloy or as a mixed core with a Cu-rich shell. In contrast with previous studies, a monotonic decrease in HER activity with increasing Cu content was observed over the composition range studied, with the current density measured at -0.3 V (vs reversible hydrogen electrode) scaling approximately linearly with Pt at. %. This trend opens up the possibility that PtCu could be used as a reference system for comparing the composition-dependent activity of other bimetallic catalysts.

Observation of Substituent Effects in the Electrochemical Adsorption and Hydrogenation of Alkynes on Pt{hkl} Using SHINERS.

By combining cyclic voltammetry (CV) and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), the adsorption behavior of two alkynes, propargyl alcohol (PA) and 2-methyl-3-butyn-2-ol (MeByOH), undergoing hydrogenation on Pt basal plane single-crystal electrodes is investigated. It is found that PA and MeByOH give rise to strong surface sensitivities in relation to both hydrogenation activity and molecular fragmentation into adsorbed species such as CO. For PA, irreversible adsorption is strongly favored for Pt{100} and Pt{110} but is weak in the case of Pt{111}. It is suggested that the presence of the primary alcohol substituent is key to this behavior, with the order of surface reactivity being Pt{100} > Pt{110} > Pt{111}. In contrast, for MeByOH, strong irreversible adsorption is observed on all three basal plane Pt surfaces and we propose that this reflects the enhanced activity of the alkyne moiety arising from the inductive effect of the two methyl groups, coupled with the decreased activity of the tertiary alcohol substituent toward fragmentation. Pt{111} also exhibits singular behavior in relation to MeByOH hydrogenation in that a sharp Raman band at 1590 cm-1 is observed corresponding to the formation of a di-σ/π-bonded surface complex as the alkyne adsorbs. This band frequency is some 20 cm-1 higher than the analogous broadband observed for PA and MeByOH adsorbed on all other basal plane Pt surfaces and may be viewed as a fingerprint of Pt{111} terraces being present at a catalyst surface undergoing hydrogenation. Insights into the hydrogenation activity of different Pt{hkl} surfaces are obtained using quantitative comparisons between Raman bands at hydrogenation potentials and at 0.4 V vs Pd/H, the beginning of the double-layer potential region, and it is asserted (with support from CV) that Pt{110} is the most active plane for hydrogenation due to the presence of surface defects generated via the lifting of the (1 × 2) to (1 × 1) clean surface reconstruction following flame annealing and hydrogen cooling. Our findings are also consistent with the hypothesis that Pt{111} planes are most likely to provide semihydrogenation selectivity of alkynes to alkenes, as reported previously.

The Role of Tungsten Oxide in Enhancing the Carbon Monoxide Tolerance of Platinum-Based Hydrogen Oxidation Catalysts.

Significant reductions in total cost of ownership can be realized by engineering PEM fuel cells to run on low-purity hydrogen. One of the main drawbacks of low-purity hydrogen fuels is the carbon monoxide fraction, which poisons platinum electrocatalysts and reduces the power output below useful levels. Platinum-tungsten oxide catalyst systems have previously shown high levels of CO tolerance during both ex situ and in situ investigations. In this work, we explore the mechanism of enhanced tolerance using in situ electrochemical attenuated total reflection-infrared (ATR-IR) and Raman spectroscopy methods and investigate, using a mixture of Pt/C and WO3 powders, the role of the WV/WVI redox couple in the oxidation of adsorbed CO.

Active site manipulation in MoS2 cluster electrocatalysts by transition metal doping.

The development of non-platinum group metal catalysts for the hydrogen evolution reaction (HER) in water electrolyser devices is essential for their widespread and sustainable deployment. In recent years, molybdenum disulfide (MoS2) catalysts have received significant attention as they not only exhibit good electrocatalytic HER activity but also, crucially, acid-stability. However, further performance enhancement is required for these materials to be competitive with Pt and to that end transition metal doping of MoS2 has been explored as a route to further increasing its catalytic activity. In this work, cluster beam deposition was employed to produce controlled cobalt-doped MoS2 clusters (MoS2-Co). We demonstrate that, in contrast to previous observations of performance enhancement in MoS2 resulting from nickel doping (MoS2-Ni), the introduction of Co has a detrimental effect on HER activity. The contrasting behaviours of Ni and Co doping are rationalized by density functional theory (DFT) calculations, which suggest that HER-active surface vacancies are deactivated by combination with Co dopant atoms, whilst their activity is retained, or even partially enhanced, by combination with Ni dopant atoms. Furthermore, the adatom dopant-vacancy combination kinetics appear to be more than three orders of magnitude faster in MoS2-Co than for MoS2-Ni. These findings highlight a fundamental difference in the influence of transition metal dopants on the HER performance of MoS2 electrocatalysts and stress the importance of considering surface atomic defects when predicting their behaviour.

Nanoscale Chemical Imaging of a Single Catalyst Particle with Tip-Enhanced Fluorescence Microscopy.

Determining the active site in real-life solid catalysts remains an intellectual challenge and is crucial for exploring the road towards their rational design. In recent years various micro-spectroscopic methods have revealed valuable structure-activity data at the level of a single catalyst particle, even under reaction conditions. Herein, we introduce Tip-Enhanced FLuorescence (TEFL) microscopy as a novel and versatile characterization tool for catalysis research. This has been achieved using a Fluid Catalytic Cracking (FCC) catalyst as showcase material. Thin sectioning of industrially used FCC particles together with selective staining of Brønsted acidity has enabled high-resolution TEFL mapping of different catalyst regions. Hyperspectral information gained via TEFL microscopy reveals a spatial distribution of Brønsted acidity within individual zeolite domains in different regions of the FCC catalyst particle. Comparison of TEFL measurements from different FCC particles showed significant intra- and inter-particle heterogeneities both in zeolite domain size and chemical reactivity.

In Situ Nanoscale Investigation of Catalytic Reactions in the Liquid Phase Using Zirconia-Protected Tip-Enhanced Raman Spectroscopy Probes.

Tip-enhanced Raman spectroscopy (TERS) is a promising technique that enables nondestructive and label-free topographical and chemical imaging at the nanoscale. However, its scope for in situ characterization of catalytic reactions in the liquid phase has remained limited due to the lack of durable and chemically inert plasmonically active TERS probes. Herein, we present novel zirconia-protected TERS probes with 3 orders of magnitude increase in lifetime under ambient conditions compared to unprotected silver-coated probes, together with high stability in liquid media. Employing the plasmon-assisted oxidation of p-aminothiophenol as a model reaction, we demonstrate that the highly robust, durable, and chemically inert zirconia-protected TERS probes can be successfully used for nanoscale spatially resolved characterization of a photocatalytic reaction within an aqueous environment. The reported improved lifetime and stability of probes in a liquid environment extend the potential scope of TERS as a nanoanalytical tool not only to heterogeneous catalysis but also to a range of scientific disciplines in which dynamic solid-liquid interfaces play a defining role.

Nanoscale chemical imaging using tip-enhanced Raman spectroscopy.

Confocal and surface-enhanced Raman spectroscopy (SERS) are powerful techniques for molecular characterization; however, they suffer from the drawback of diffraction-limited spatial resolution. Tip-enhanced Raman spectroscopy (TERS) overcomes this limitation and provides chemical information at length scales in the tens of nanometers. In contrast to alternative approaches to nanoscale chemical analysis, TERS is label free, is non-destructive, and can be performed in both air and liquid environments, allowing its use in a diverse range of applications. Atomic force microscopy (AFM)-based TERS is especially versatile, as it can be applied to a broad range of samples on various substrates. Despite its advantages, widespread uptake of this technique for nanoscale chemical imaging has been inhibited by various experimental challenges, such as limited lifetime, and the low stability and yield of TERS probes. This protocol details procedures that will enable researchers to reliably perform TERS imaging using a transmission-mode AFM-TERS configuration on both biological and non-biological samples. The procedure consists of four stages: (i) preparation of plasmonically active TERS probes; (ii) alignment of the TERS system; (iii) experimental procedures for nanoscale imaging using TERS; and (iv) TERS data processing. We provide procedures and example data for a range of different sample types, including polymer thin films, self-assembled monolayers (SAMs) of organic molecules, photocatalyst surfaces, small molecules within biological cells, single-layer graphene and single-walled carbon nanotubes in both air and water. With this protocol, TERS probes can be prepared within ~23 h, and each subsequent TERS experimental procedure requires 3-5 h.

Mechanism of Gold-Assisted Exfoliation of Centimeter-Sized Transition-Metal Dichalcogenide Monolayers.

Exfoliation of large-area monolayers is important for fundamental research and technological implementation of transition-metal dichalcogenides. Various techniques have been explored to increase the exfoliation yield, but little is known about the underlying mechanism at the atomic level. Here, we demonstrate gold-assisted mechanical exfoliation of monolayer molybdenum disulfide, up to a centimeter scale. Detailed spectroscopic, microscopic, and first-principles density functional theory analyses reveal that strong van der Waals (vdW) interaction between Au and the topmost MoS2 layer facilitates the exfoliation of monolayers. However, the large-area exfoliation promoted by such strong vdW interaction is only achievable on freshly prepared clean and smooth Au surfaces, while rough surfaces and surfaces exposed to air for more than 15 min result in negligible exfoliation yields. This technique is successfully extended to MoSe2, WS2, WSe2, MoTe2, WTe2, and GaSe. In addition, electrochemical characterization reveals intriguing interactions between monolayer MoS2 and Au. A subnanometer-thick MoS2 monolayer strongly passivates the chemical properties of the underlying Au, and the Au significantly modulates the electronic band structure of the MoS2, turning it from semiconducting to metallic. This could find applications in many areas, including electrochemistry, photovoltaics, and photocatalysis.

Nanoscale chemical imaging of solid-liquid interfaces using tip-enhanced Raman spectroscopy.

Tip-enhanced Raman spectroscopy (TERS) is a powerful tool for non-destructive and label-free surface molecular mapping at the nanoscale. However, to date nanoscale resolution chemical imaging in a liquid environment has not been possible, in part due to the lack of robust TERS probes that are stable when immersed in a liquid. In this work, we have addressed this challenge by developing plasmonically-active TERS probes with a multilayer metal coating structure that can be successfully used within a liquid environment. Using these novel TERS probes, we have compared the plasmonic enhancement of TERS signals in air and water environments for both gap mode and non-gap mode configurations and show that in both cases the plasmonic enhancement decreases in water. To better understand the signal attenuation in water, we have performed numerical simulations that revealed a negative correlation between the electric field enhancement at the TERS probe-apex and the refractive index of the surrounding medium. Finally, using these robust probes we demonstrate TERS imaging with nanoscale spatial resolution in a water environment for the first time by employing single-wall carbon nanotubes as a model sample. Our findings are expected to broaden the scope of TERS to a range of scientific disciplines in which nanostructured solid-liquid interfaces play a key role.

Extending the plasmonic lifetime of tip-enhanced Raman spectroscopy probes.

Tip-enhanced Raman spectroscopy (TERS) is an emerging technique for simultaneous mapping of chemical composition and topography of a surface at the nanoscale. However, rapid degradation of TERS probes, especially those coated with silver, is a major bottleneck to the widespread uptake of this technique and severely prohibits the success of many TERS experiments. In this work, we carry out a systematic time-series study of the plasmonic degradation of Ag-coated TERS probes under different environmental conditions and demonstrate that a low oxygen (<1 ppm) and a low moisture (<1 ppm) environment can significantly improve the plasmonic lifetime of TERS probes from a few hours to a few months. Furthermore, using X-ray photoelectron spectroscopy (XPS) measurements on Ag nanoparticles we show that the rapid plasmonic degradation of Ag-coated TERS probes can be correlated to surface oxide formation. Finally, we present practical guidelines for the effective use and storage of TERS probes to improve their plasmonic lifetime based on the results of this study.

Intrinsically Microporous Polymer Retains Porosity in Vacuum Thermolysis to Electroactive Heterocarbon.

Vacuum carbonization of organic precursors usually causes considerable structural damage and collapse of morphological features. However, for a polymer with intrinsic microporosity (PIM-EA-TB with a Brunauer-Emmet-Teller (BET) surface area of 1027 m(2)g(-1)), it is shown here that the rigidity of the molecular backbone is retained even during 500 °C vacuum carbonization, yielding a novel type of microporous heterocarbon (either as powder or as thin film membrane) with properties between those of a conducting polymer and those of a carbon. After carbonization, the scanning electron microscopy (SEM) morphology and the small-angle X-ray scattering (SAXS) Guinier radius remain largely unchanged as does the cumulative pore volume. However, the BET surface area is decreased to 242 m(2)g(-1), but microporosity is considerably increased. The new material is shown to exhibit noticeable electrochemical features including two pH-dependent capacitance domains switching from ca. 33 Fg(-1) (when oxidized) to ca. 147 Fg(-1) (when reduced), a low electron transfer reactivity toward oxygen and hydrogen peroxide, and a four-point-probe resistivity (dry) of approximately 40 MΩ/square for a 1-2 µm thick film.

Electrochemical imaging of hydrogen peroxide generation at individual gold nanoparticles.

Localised hydrogen peroxide generation at individual catalytic gold nanoparticles within ensemble electrodes is mapped for the first time using combined scanning electrochemical-scanning ion conductance microscopy (SECM-SICM).

Mapping electroactivity at individual catalytic nanostructures using high-resolution scanning electrochemical-scanning ion conductance microcopy.

Combined scanning electrochemical-scanning ion conductance microcopy (SECM-SICM) has been used to map the electroactivity of surfaces decorated with individual features at the 100-150 nm scale. Dual channel capillary probes consisting of an open SICM barrel, and a solid carbon SECM electrode enabled correlation of surface activity with accurate topographical information. Measurements were validated by approach curve analysis and imaging of model systems in feedback and substrate generation-tip collection modes and then applied to the examination of two nanostructured test substrates. First, electronically isolated gold nanodisk arrays were imaged using a simple electrochemical redox mediator, in which a clear positive feedback signal was observed at the SECM electrode, and the topographical channel compared well with AFM imaging. Second, platinum nanosphere ensembles were mapped using platinum-modified carbon probes to detect oxygen consumption in a redox competition mode, demonstrating the means to study electrocatalytic processes at individual nanoparticles. This work demonstrates the value of high-resolution SECM-SICM for low-current amperometric imaging of nanosystems, and is a step toward quantitative measurement of electrokinetics at the single particle level.

High-resolution electrochemical and topographical imaging using batch-fabricated cantilever probes.

New cantilever probes for combined scanning electrochemical microscopy-atomic force microscopy (SECM-AFM) have been batch-fabricated, and their application to high resolution electrochemical-topographical imaging has been demonstrated. The conical probes yield outstanding quality Faradaic current maps alongside subnm level topographical information as exemplified by the electrochemical imaging of exfoliated graphene and graphite samples. Current mapping reveals significant heterogeneities in the electroactivity of these carbon surfaces that do not directly correlate to topographical features, suggesting the presence of adsorbed chemical contaminants or intrinsic impurities.

Influence of acoustic cavitation on the controlled ultrasonic dispersion of carbon nanotubes.

Ultrasonication is the most widely used technique for the dispersion of a range of nanomaterials, but the intrinsic mechanism which leads to stable solutions is poorly understood with procedures quoted in the literature typically specifying only extrinsic parameters such as nominal electrical input power and exposure time. Here we present new insights into the dispersion mechanism of a representative nanomaterial, single-walled carbon nanotubes (SW-CNTs), using a novel up-scalable sonoreactor and an in situ technique for the measurement of acoustic cavitation activity during ultrasonication. We distinguish between stable cavitation, which leads to chemical modification of the surface of the CNTs, and inertial cavitation, which favors CNT exfoliation and length reduction. Efficient dispersion of CNTs in aqueous solution is found to be dominated by mechanical forces generated via inertial cavitation, which in turn depends critically on surfactant concentration. This study highlights that careful measurement and control of cavitation rather than blind application of input power is essential in the large volume production of nanomaterial dispersions with tailored properties.