Preparation and High-Temperature Resistance Properties of Phenolic Resin/Phosphate Hybrid Coatings.

In this study, a novel fabrication method was used to synthesize phenolic resin/phosphate hybrid coatings using aluminum dihydrogen phosphate (Al(H2PO4)3, hereafter denoted as Al), SC101 silica sol (Si) as the primary film-forming agent, and phenolic resin (PF) as the organic matrix. This approach culminated in the formation of Al+Si+PF organo-inorganic hybrid coatings. Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) results confirmed the successful integration of hybrid structures within these coatings. The crystalline structure of the coatings post-cured at various temperatures was elucidated using X-ray diffraction (XRD). Additionally, the surface and cross-sectional morphologies were meticulously analyzed using scanning electron microscopy (SEM), offering insights into the microstructural properties of the coatings. The coatings' porosities under diverse thermal and temporal regimes were quantitatively evaluated using advanced image processing techniques, revealing a significant reduction in porosity to a minimum of 5.88% following a thermal oxidation process at 600 °C for 10 h. The antioxidant efficacy of the phosphate coatings was rigorously assessed through cyclic oxidation tests, which revealed their outstanding performance. Specifically, at 300 °C across 300 h of cyclic oxidation, the weight losses recorded for phosphate varnish and the phenolic resin-infused phosphate coatings were 0.15 mg·cm-2 and 0.09 mg·cm-2, respectively. Furthermore, at 600 °C and over an identical period, the weight reduction was noted as 0.21 mg·cm-2 for phosphate varnish and 0.085 mg·cm-2 for the hybrid coatings, thereby substantiating the superior antioxidation capabilities of the phenolic resin hybrid coatings in comparison to the pure phosphate varnish.

Harnessing active biofilm for microbial corrosion protection of carbon steel against Geobacter sulfurreducens.

Microbiologically influenced corrosion (MIC) caused by corrosive microorganisms poses significant economic losses and safety hazards. Conventional corrosion prevention methods have limitations, so it is necessary to develop the eco-friendly and long-term effective strategies to mitigate MIC. This study investigated the inhibition of Vibrio sp. EF187016 biofilm on Geobacter sulfurreducens on carbon steel. Vibrio sp. EF187016 biofilm reduced the corrosion current density and impeded pitting corrosion. A thick and uniform Vibrio sp. EF187016 biofilm formed on the coupon surfaces, acting as a protective layer against corrosive ions and electron acquisition by G. sulfurreducens. The pre-grown mature Vibrio sp. EF187016 biofilms, provided enhanced protection against G. sulfurreducens corrosion. Additionally, the extracellular polymeric substances from Vibrio sp. EF187016 was confirmed to act as a green corrosion inhibitor to mitigate microbial corrosion. This study highlights the potential of active biofilms for eco-friendly corrosion protection, offering a novel perspective on material preservation against microbial corrosion.

Preclinical Animal Study and Pilot Clinical Trial of Using Enriched Peripheral Blood-Derived Mononuclear Cells for Intervertebral Disc Degeneration.

Low back pain (LBP) is a leading cause of long-term disability globally. Intervertebral disk degeneration (IVDD) is mainly responsible for discogenic pain in LBP-affected young patients. There is no effective therapy to reverse disease severity and IVDD progression. This study investigates the effect of human peripheral blood-derived mononuclear cells (PBMCs) on pain relief and life quality improvement in IVDD patients. The enriched monocytes of the PBMCs could differentiate into CD14 and CD206 double-positive M2 macrophages in vitro. Preclinical evidence in rats showed that the transplanted PBMCs exhibited anti-inflammatory and moderate tissue-repair effects on controlling IVDD progress in the rat model. The PBMCs significantly steered the aggrecan and type II collagen expressions and attenuated the pro-inflammatory cytokines in the affected disk. Based on the animal results, 36 patients with chronic low back pain (CLBP) were included in clinical trials. The control group was conservative care only, and the experimental group was platelet-rich plasma (PRP) and PBMCs intradiscal injections. We first confirmed the single lumbar disk causing the discogenic pain by provocative discography or magnetic resonance imaging (MRI). Discogenic LBP participants received one intradiscal injection of autologous PBMCs and followed for 6 months. Our clinical trial showed that patients' LBP and disability were significantly ameliorated after the PBMCs transplantation rather than PRP. These preclinical and pilot clinical studies indicate that intradiscal injection of the enriched PBMCs might be a feasible and potential cell therapy to control pain and disability in IVDD patients.

Combatting cyanobacteria: unraveling the potency of 316L-Cu stainless steel in inhibiting Microcystis aeruginosa growth.

Harmful algal blooms, particularly those of Microcystis aeruginosa, present significant ecological and health risks. To address this issue, this study utilized a custom static algal growth assessment apparatus to investigate the anti-algal performance of a copper-alloyed 316L stainless steel (SS), named 316L-Cu SS. This material was compared with traditional 316L SS, which is widely utilized in freshwater systems for its corrosion resistance. Algal growth dynamics were monitored through optical density (OD) and chlorophyll A concentration measurements. Notably, 316L-Cu SS exhibited superior inhibitory effects on Microcystis aeruginosa growth compared to 316L SS and control groups. Inductively coupled plasma mass spectrometry (ICP-MS) confirmed that the copper ion release from 316L-Cu SS played a critical role in this algal suppression, which interfered with photosynthesis, induced oxidative stress, and damaged algal cell membranes. In contrast, other metal ions (Ni, Cr, Fe) had a negligible impact on algal growth. The study highlights 316L-Cu SS as a promising material for mitigating harmful algal blooms, thereby offering potential benefits for both aquatic ecosystem conservation and public health protection.

Effect of Surface Activation on the Microstructure and Corrosion Resistance of MAO/Ni-P Composite Coating on AZ91D Magnesium Alloy.

The purpose of this study is to improve the number and distribution of active particles on the MAO layer by changing the activation method, thus improving the corrosion resistance of the coating. The structure of the coatings was characterized by SEM, XRD, XPS, and AFM, as well as the corrosion resistance of the coatings by polarization curves, EIS tests, immersion tests, and salt spray tests. The conductive resistance and adhesion of different composite coatings were compared. The results demonstrate that the properties of the composite coating are significantly affected by different activation methods, and the Ni-P coating prepared with more active particles offers superior corrosion protection to the inner layer. The quantity and distribution of active particles affect the compactness of the coating by influencing the initial deposition process. The size of nickel particles is larger and the inter-grain porosity increases in the case of fewer active sites, and as the number of active sites increases, the size of nickel particles decreases, and the coating compactness increases. The mechanism of the effect of the number of active particles on the deposition process of electroless Ni-P coating was proposed.

The fate of arsenic during the crystallization process of FeIII oxyhydroxides: Effect of reaction media, pH value, and Fe/As molar ratio under relatively low arsenic loading.

Understanding the nature of arsenic (As) adsorbed on FeIII oxyhydroxides, and the subsequent behavior of As during the crystallization process, is critical to predicting its fate in a range of natural and engineered settings. In this work, As adsorbed on FeIII oxyhydroxides formed in the different reaction media at different pH values were characterized with X-ray diffraction (XRD), Raman spectra, transmission electron microscopy (TEM), and extended X-ray absorption fine structure spectroscopy (EXAFS) to determine how As is redistributed during the crystallization process. Results showed that at pH 12, a quarter of the added As was still left in the liquid phase with the formation of goethite and hematite as the major and minor product. The concentration of As was found to be the lowest at pH 4 which is independent of the reaction media, indicating the importance of pH value in the crystallization process of the As adsorbed FeIII oxyhydroxides. Under acidic conditions, sulfate and chloride media favored the formation of goethite and hematite, respectively. Arsenic can indeed be incorporated into the structure of the formed goethite at pH 4. The morphology of the formed products changed to rhombus-like particles if both goethite and hematite appeared as the later as the dominant product.

Accelerated Microbial Corrosion by Magnetite and Electrically Conductive Pili through Direct Fe0 -to-Microbe Electron Transfer.

Electrobiocorrosion, the process in which microbes extract electrons from metallic iron (Fe0 ) through direct Fe0 -microbe electrical connections, is thought to contribute to the costly corrosion of iron-containing metals that impacts many industries. However, electrobiocorrosion mechanisms are poorly understood. We report here that electrically conductive pili (e-pili) and the conductive mineral magnetite play an important role in the electron transfer between Fe0 and Geobacter sulfurreducens, the first microbe in which electrobiocorrosion has been rigorously documented. Genetic modification to express poorly conductive pili substantially diminished corrosive pitting and rates of Fe0 -to-microbe electron flux. Magnetite reduced resistance to electron transfer, increasing corrosion currents and intensifying pitting. Studies with mutants suggested that the magnetite promoted electron transfer in a manner similar to the outer-surface c-type cytochrome OmcS. These findings, and the fact that magnetite is a common product of iron corrosion, suggest a potential positive feedback loop of magnetite produced during corrosion further accelerating electrobiocorrosion. The interactions of e-pili, cytochromes, and magnetite demonstrate mechanistic complexities of electrobiocorrosion, but also provide insights into detecting and possibly mitigating this economically damaging process.

Nuclear localization of TET2 requires ß-catenin activation and correlates with favourable prognosis in colorectal cancer.

Mutation-induced malfunction of ten-eleven translocation methylcytosine dioxygenase 2 (TET2) is widely reported in haematological malignancies. However, the role of TET2 in solid cancers, including colorectal cancer (CRC), is unclear. Here, we found that TET2 malfunction in CRC is mostly due to decreased nuclear localization and that nuclear localization of TET2 is correlated with better survival of patients. To explore the underlying mechanisms, 14 immortalized solid tumour cell lines and 12 primary CRC cell lines were used. TET2 was mostly detected in the nucleus, and it induced significant DNA demethylation and suppressed cell growth by demethylating RORA and SPARC in cell lines like SW480. While in cell lines like SW620, TET2 was observed in the cytosol and did not affect DNA methylation or cell growth. Further examination with immunoprecipitation-mass spectrometry illustrated that ß-catenin activation was indispensable for the nuclear localization and tumour suppression effects of TET2. In addition, the ß-catenin pathway activator IM12 and the TET2 activator vitamin C were used simultaneously to enhance the effects of TET2 under low-expression conditions, and synergistic inhibitory effects on the growth of cancer were observed both in vitro and in vivo. Collectively, these data suggest that ß-catenin-mediated nuclear localization of TET2 is an important therapeutic target for solid tumours.

Structure and Wear Performance of a Titanium Alloy by Using Low-Temperature Plasma Oxy-Nitriding.

To solve the problems of high nitriding temperature and long nitriding time with conventional plasma nitriding technologies, a kind of low-temperature plasma oxy-nitriding technology containing two-stage processes with different ratios of N to O was developed on a TC4 alloy in this paper. A thicker permeation coating can be obtained with this new technology compared to conventional plasma nitriding technology. The reason for this is that the oxygen introduction in the first two-hour oxy-nitriding step can break the continuous TiN layer, which facilitates the quick and deep diffusion of the solution-strengthening elements of O and N into the titanium alloy. Moreover, an inter-connected porous structure was formed under a compact compound layer, which acts as a buffer layer to absorb the external wear force. Therefore, the resultant coating showed the lowest COF values during the initial wear state, and almost no debris and cracks were detected after the wear test. For the treated samples with low hardness and no porous structure, fatigue cracks can easily form on the surface, and bulk peeling-offcan occur during the wear course.

Multifunctional solvent molecule design enables high-voltage Li-ion batteries.

Elevating the charging cut-off voltage is one of the efficient approaches to boost the energy density of Li-ion batteries (LIBs). However, this method is limited by the occurrence of severe parasitic reactions at the electrolyte/electrode interfaces. Herein, to address this issue, we design a non-flammable fluorinated sulfonate electrolyte by multifunctional solvent molecule design, which enables the formation of an inorganic-rich cathode electrolyte interphase (CEI) on high-voltage cathodes and a hybrid organic/inorganic solid electrolyte interphase (SEI) on the graphite anode. The electrolyte, consisting of 1.9 M LiFSI in a 1:2 v/v mixture of 2,2,2-trifluoroethyl trifluoromethanesulfonate and 2,2,2-trifluoroethyl methanesulfonate, endows 4.55 V-charged graphite||LiCoO2 and 4.6 V-charged graphite||NCM811 batteries with capacity retentions of 89% over 5329 cycles and 85% over 2002 cycles, respectively, thus resulting in energy density increases of 33% and 16% compared to those charged to 4.3 V. This work demonstrates a practical strategy for upgrading the commercial LIBs.

Enriched Peripheral Blood-Derived Mononuclear Cells for Treating Knee Osteoarthritis.

Osteoarthritis (OA) is a common chronic skeletal disease in the elderly. There is no effective therapy to reverse disease severity and knee OA (KOA) progression, particularly at the late stage. This study aims to examine the effect of peripheral blood-derived mononuclear cells (PBMNCs) on pain and motor function rescue in patients with Kellgren-Lawrence (KL) grade II to IV KOA. Participants received one intra-articular (IA) injection of autologous PBMNCs. The mononuclear cells were isolated from peripheral blood, enriched by a specialized medium (MoFi medium), and separated by Ficoll-Paque solution. The isolated and enriched PBMNCs could differentiate into M1 and M2 macrophages in vitro. The in vivo anti-inflammatory effect of the PBMNCs was similar to that of bone marrow mesenchymal stem cells, evaluated by complete Freund's adjuvant-induced arthritis in rodents. A single-arm and open-label pilot study showed that patients' knee pain and motor dysfunction were significantly attenuated after the cell transplantation, assessed by visual analogue scale (VAS) and Knee injury and Osteoarthritis Outcome Score (KOOS) at 6 and 12 months post-treatment. Notably, the therapeutic effect of the PBMNCs treatment can be stably maintained for 24 months, as revealed by the KOOS scores. These preclinical and pilot clinical data suggest that IA injection of MoFi-PBMNCs might serve as a novel medical technology to control the pain and the progress of KOA.

Targeting NAD metabolism regulates extracellular adenosine levels to improve the cytotoxicity of CD8+ effector T cells in the tumor microenvironment of gastric cancer.

PURPOSE: Nicotinamide adenine dinucleotide (NAD+) is closely related to the pathogenesis of tumors. However, the effect of NAD+ metabolism of gastric cancer (GC) cells on immune cells remains unexplained. We targeted nicotinamide phosphoribosyltransferase (NAMPT), a rate-limiting enzyme in the NAD+ synthesis salvage pathway, to observe its effect in the immune microenvironment. METHODS: NAMPT of GC cell lines was inhibited by using the small molecule inhibitor (FK866) and short hairpin RNA (shRNA). CCK-8 test and flow cytometry were performed to detect cell viability and apoptosis. Immunofluorescence was used to observe changes in mitochondrial membrane potential (MMP).The transfected GC cells (AGS) and patient-derived organoids (PDOs) were cocultured with activated PBMCs, followed by flow cytometric analysis (FCA) for cytokines and inhibitory marker. The level of NAD and ATP of GC cells (AGS & MKN45) was tested combined with NMN and CD39 inhibitor. RESULTS: Targeting NAD+ by FK866 obviously reduced MMP, which ultimately inhibited proliferation and increased the apoptosis of GC cells. NAMPT silencing reduced intracellular NAD and ATP，further decreased extracellular adenosine. Meawhile, the cytokines of CD8+T cells were significantly increased after cocultured with transfected AGS, and the expression of PD-1 was distinctly decreased. NMN reversed the effect of shNAMPT and enhanced the immunosuppression. Consistent results were obtained by coculturing PBMCs with PDOs. CONCLUSION: Restraining the function of NAMPT resulted in the functional improvement of effector CD8+ T cells by decreasing extracellular adenosine levels and inducing apoptosis of GC cells simultaneously. Therefore, this study demonstrates that NAMPT can be an effective target for gastric cancer immunotherapy.

Induction of type II collagen expression in M2 macrophages derived from peripheral blood mononuclear cells.

The human type II collagen (Col II), specifically expressed in chondrocytes, is a crucial component of the adult hyaline cartilage. We examine the potential of artificial induction of Col II in human peripheral blood mononuclear cells (PBMNCs) as a novel Col II provider. Human PBMNCs were purified and were treated with high doses of macrophage-colony stimulating factor (M-CSF), granulocyte macrophage-colony stimulating factor (GM-CSF), or granulocyte-colony stimulating factor (G-CSF) and examined the Col II expression at indicated days. Quantitative Col II expression was validated by real-time reverse transcriptase-polymerase chain reaction (RT-PCR), immunocytochemistry, and flow cytometry. We demonstrate that monocytes in PBMNCs can be artificially induced to express both Col II proteins and M2 macrophage markers by the high concentration of colony-stimulating factors, especially M-CSF and GM-CSF. The Col II proteins were detected on the cell membrane and in the cytoplasm by flow cytometry and immunocytostaining. Combination with IL-4 provided a synergistic effect with M-CSF/GM-CSF to trigger Col II expression in M2 macrophages. These CD206 and Col II double-expressing cells, named modified macrophages, share M2 macrophages' anti-inflammatory potency. We demonstrated that the modified macrophages could significantly attenuate the inflammatory progress of Complete Freund's adjuvant (CFA)-induced arthritis and collagen-induced arthritis in rodents. Here, we provide the first evidence that a modified macrophage population could ectopically express Col II and control the progress of arthritis in animals.

Single Dense Layer of PEO Coating on Aluminum Fabricated by "Chain-like" Discharges.

Reducing the loose-layer-to-dense-layer ratio in PEO coatings on aluminum and its alloys is the key to improving their corrosion resistance and expanding their applications in the aerospace industry and other fields. In this paper, we describe the discharge evolution during the PEO process in exhaustive detail and report the appearance of a novel "chain-like" discharge for the first time. We investigated the microstructure and composition of PEO coatings using a scanning electron microscope (SEM) equipped with an energy-dispersive spectrometer (EDS) and an X-ray diffractometer (XRD). The results reflected that the coating composition changed from amorphous Al2O3 to crystalline γ-Al2O3 and α-Al2O3 phases with the evolution of the plasma spark discharge state. We evaluated the electrochemical behavior of the coatings using a potentiodynamic polarization curve and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. Under "chain-like" discharge, the icorr of the coating on Al was 8.564 × 10-9 A∙cm-2, which was five orders of magnitude lower than that of the sample without the PEO coating. Moreover, we evaluated the adhesion strength of the coatings at different stages using a pull-off test. The adhesion strength of the PEO coatings at stage V reached 70 MPa. Furthermore, the high content of α-Al2O3 increased the hardness of the coating to 2000 HV. Therefore, the "chain-like" discharge promoted the formation of a single dense layer with 2.8% porosity and that demonstrated excellent properties. We also propose a mechanism to explain the influence of the plasma spark discharge state on the microstructure and composition of the PEO coatings.

Accelerated biocorrosion of stainless steel in marine water via extracellular electron transfer encoding gene phzH of Pseudomonas aeruginosa.

Microbiologically influenced corrosion (MIC) constantly occurs in water/wastewater systems, especially in marine water. MIC contributes to billions of dollars in damage to marine industry each year, yet the physiological mechanisms behind this process remain poorly understood. Pseudomonas aeruginosa is a representative marine electro-active bacterium, which has been confirmed to cause severe MIC on carbon steel through extracellular electron transfer (EET). However, little is known about how P. aeruginosa causes corrosion on stainless steel. In this study, the corrosivity of wild-type strain, phzH knockout, phzH complemented, and phzH overexpression P. aeruginosa mutants were evaluated to explore the underlying MIC mechanism. We found the accelerated MIC on 2205 duplex stainless steel (DSS) was due to the secretion of phenazine-1-carboxamide (PCN), which was regulated by the phzH gene. Surface analysis, Mott-Schottky test and H2O2 measurement results showed that PCN damaged the passive film by forming H2O2 to oxidize chromium oxide to soluble hexavalent chromium, leading to more severe pitting corrosion. The normalized corrosion rate per cell followed the same order as the general corrosion rate obtained under each experimental condition, eliminating the influence of the total amount of sessile cells on corrosion. These findings provide new insight and are meaningful for the investigation of MIC mechanisms on stainless steel. The understanding of MIC can improve the sustainability and resilience of infrastructure, leading to huge environmental and economic benefits.

Direct microbial electron uptake as a mechanism for stainless steel corrosion in aerobic environments.

Shewanella oneidensis MR-1 is an attractive model microbe for elucidating the biofilm-metal interactions that contribute to the billions of dollars in corrosion damage to industrial applications each year. Multiple mechanisms for S. oneidensis-enhanced corrosion have been proposed, but none of these mechanisms have previously been rigorously investigated with methods that rule out alternative routes for electron transfer. We found that S. oneidensis grown under aerobic conditions formed thick biofilms (∼50 µm) on stainless steel coupons, accelerating corrosion over sterile controls. H2 and flavins were ruled out as intermediary electron carriers because stainless steel did not reduce riboflavin and previous studies have demonstrated stainless does not generate H2. Strain ∆mtrCBA, in which the genes for the most abundant porin-cytochrome conduit in S. oneidensis were deleted, corroded stainless steel substantially less than wild-type in aerobic cultures. Wild-type biofilms readily reduced nitrate with stainless steel as the sole electron donor under anaerobic conditions, but strain ∆mtrCBA did not. These results demonstrate that S. oneidensis can directly consume electrons from iron-containing metals and illustrate how direct metal-to-microbe electron transfer can be an important route for corrosion, even in aerobic environments.

Polyethyleneimine Functionalized Mesoporous Magnetic Nanoparticles with Enhanced Antibacterial and Antibiofilm Activity in an Alternating Magnetic Field.

Despite a lot of research on the antibacterial effect of Fe3O4 nanoparticles, their interactions with biofilm matrix have not been well understood. The surface charge of nanoparticles mainly determines their ability to adhere on the biofilm. In this work, negatively charged Fe3O4 nanoparticles were synthesized via a trisodium citrate-assisted solvothermal method and then the surfaces were functionalized using polyethyleneimine (PEI) to obtain positively charged Fe3O4 nanoparticles. The antibacterial and antibiofilm activities of both negatively and positively charged Fe3O4 nanoparticles in an alternating magnetic field were then systematically investigated. The positively charged Fe3O4 nanoparticles showed a strong self-adsorbed attachment ability to the planktonic and sessile cells, resulting in a better antibacterial activity and enhanced biofilm eradication performance compared to the conventional Fe3O4 nanoparticles with negative charges. Fe3O4@PEI nanoparticles produced physical stress and thermal damage in response to an alternating magnetic field, inducing the accumulation of intracellular reactive oxygen species into live bacterial cells, bacterial membrane damage, and biofilm dispersion. Utilizing an alternating magnetic field along with positively charged nanoparticles leads to a synergistic antibacterial approach to improve the antibiofilm performance of magnetic nanoparticles.

Bacterial biofilms as platforms engineered for diverse applications.

Historically, biofilms have been perceived as problematic or detrimental. However, biofilms possess favorable traits such as self-regeneration, sustainability, scalability, and tunability, which make them candidates for diverse applications. Traditional applications of biofilms, such as environmental remediation, bioleaching, microbial fuel cells, and corrosion protection, are often built on the basis of wild-type or metabolically engineered strains. In this review, we further comment on the design strategies for multiple innovative applications of living functional biofilms. With the integration of signaling pathways, engineering of metabolic pathways and modification of extracellular polymeric substances, living functional biofilms have been constructed by researchers through various strategies. Functional biofilms for diverse applications, including catalysis, electric conduction, bioremediation, and medical therapy have been demonstrated in the literature. The mechanical properties of biofilms can be tuned through genetic editing, metal ion curing and synthetic gene circuits, etc. In addition, the improvement of 3D printing to use bioinks has also achieved significant progresses in fabricating living functional biofilms with specific structures. In the future, the combination of synthetic biology and techniques from other disciplines will lead to practical large-scale applications of biofilms.

Corrosion behavior of high nitrogen nickel-free austenitic stainless steel in the presence of artificial saliva and Streptococcus mutans.

High nitrogen nickel-free austenitic stainless steels (HNSs) have great potentials to be used in dentistry owing to its exceptional mechanical properties, high corrosion resistance, and biocompatibility. In this study, HNSs with nitrogen of 0.88 wt% and 1.08 wt% displayed much lower maximum pit depths than 316L stainless steel (SS) after 21 d of immersion in abiotic artificial saliva (2.2 µm and 1.7 µm vs. 4.5 µm). Microbiologically influenced corrosion (MIC) evaluations revealed that Streptococcus mutans biofilms led to much severer corrosion of 316L SS than HNSs. Corrosion current densities of HNSs were two orders of magnitude lower than that of 316L SS after incubation of 7 d (37.5 nA/cm2 and 29.9 nA/cm2 vs. 5.63 µA/cm2). The pitting potentials of HNSs were at least 550 mV higher than that of 316L SS in the presence of S. mutans, confirming the better MIC resistance of HNSs. Cytotoxicity assay confirmed that HNSs were not toxic to MC3T3-E1 cells and allowed better sessile cell growth on them than on 316L SS. It can be concluded that HNSs are more suitable dental materials than the conventional 316L SS.