An eco-friendly porous hydrogel adsorbent based on dextran/phosphate/amino for efficient removal of Be(II) from aqueous solution.

A novel environmentally-friendly porous hydrogel adsorbent (GHPN) is firstly designed and prepared using dextran, phosphate, and calcium hydroxide for the adsorption of Be(II). GHPN shows good adsorption selectivity for Be(II) (Kd = 1.53 × 104 mL/g). According the adsorption kinetics and thermodynamics, the theoretical adsorption capacity of GHPN to Be(II) is 43.75 mg/g (35 °C, pH = 6.5), indicating a spontaneous exothermic reaction. After being reused for 5 cycles, the adsorption and desorption efficiencies of Be(II) with GHPN are obtained to be more than 80 %, showing acceptable recycling performance. Both of the characterizations and theoretical calculations indicate that the phosphate group, hydroxyl group, and amino group own the affinity to form stable complexes with Be(II). Benefiting from the introduction of phosphate and amino, the adsorption effect of the hydrogel adsorbent on Be(II) can be greatly improved, and surface precipitation, complexation, and ligand exchange are the dominant mechanisms of beryllium adsorption. The results suggest that GHPN has great potential to be utilized as an eco-friendly and useful adsorbent of Be(II) from aqueous solution.

Yolk-shell FeS@N-doped carbon nanosphere as superior anode materials for sodium-ion batteries.

Iron sulfides have shown great potential as anode materials for sodium-ion batteries (SIBs) because of their high sodium storage capacity and low cost. Nevertheless, iron sulfides generally exhibit unsatisfied electrochemical performance induced by sluggish electron/ion transfer and severe pulverization upon the sodiation/desodiation process. Herein, we constructed a yolk-shell FeS@NC nanosphere with an N-doped carbon shell and FeS particle core via a simple hydrothermal method, followed by in-situ polymerization and vulcanization. The FeS particles intimately coupled with N-doped carbon can accelerate the electron transfer, avoid severe volume expansion, and maintain structural stability upon repeated sodiation/desodiation process. Furthermore, the small particle size of FeS can shorten ion-diffusion distance and facilitate ion transportation. Therefore, the FeS@NC nanosphere shows excellent cycling performance and superior rate capability that it can deliver a high capacity of 520.1 mAh g-1 over 800 cycles at 2.0 A g-1 and a remarkable capacity of 625.9 mAh g-1 at 10.0 A g-1.

TiO2 Electron Transport Layer with p-n Homojunctions for Efficient and Stable Perovskite Solar Cells.

Low-temperature processed electron transport layer (ETL) of TiO2 that is widely used in planar perovskite solar cells (PSCs) has inherent low carrier mobility, resulting in insufficient photogenerated electron transport and thus recombination loss at buried interface. Herein, we demonstrate an effective strategy of laser embedding of p-n homojunctions in the TiO2 ETL to accelerate electron transport in PSCs, through localized build-in electric fields that enables boosted electron mobility by two orders of magnitude. Such embedding is found significantly helpful for not only the enhanced crystallization quality of TiO2 ETL, but the fabrication of perovskite films with larger-grain and the less-trap-states. The embedded p-n homojunction enables also the modulation of interfacial energy level between perovskite layers and ETLs, favoring for the reduced voltage deficit of PSCs. Benefiting from these merits, the formamidinium lead iodide (FAPbI3) PSCs employing such ETLs deliver a champion efficiency of 25.50%, along with much-improved device stability under harsh conditions, i.e., maintain over 95% of their initial efficiency after operation at maximum power point under continuous heat and illumination for 500 h, as well as mixed-cation PSCs with a champion efficiency of 22.02% and over 3000 h of ambient storage under humidity stability of 40%. Present study offers new possibilities of regulating charge transport layers via p-n homojunction embedding for high performance optoelectronics.

Dopamine Sulfonate Ligand-Assisted TiO2 Deposition Enabling Highly Efficient and Stable Perovskite Solar Cells.

The metal oxide electron transport layers (ETLs) with flat morphology and high electrical quality are essential to manufacture highly efficient perovskite solar cells (PSCs), in which the regulation of the metal oxide deposition process plays a crucial role. Herein, a judiciously designed dopamine sulfonate (DS) ligand-assisted deposition of titanium dioxide (TiO2) films approach is implemented based on electrostatic repulsion and steric hindrance of assembled ligands to improve colloidal nanoparticles dispersity in precursor and effectively inhibit their aggregation, which could enable obtaining smooth topography of TiO2 films and initiating growth of top high-quality perovskite films. Furthermore, sulfonate bridges bonded on the perovskite buried layer that is beneficial to form better buried interface contact and accelerate electron extraction. As a result, the PSCs employing DS/TiO2 ETLs exhibit the best power conversion efficiency of 24.53% with impressive storage stability and operation stability, i.e., remaining more than 88% of their initial efficiency upon storage N2 glovebox without encapsulation over 4000 h, and the efficiency does not attenuate significantly under maximum power point for 60 h.

Wearable Sensing Device Integrated with Prestored Reagents for Cortisol Detection in Sweat.

Wearable sweat sensors have achieved rapid development since they hold great potential in personalized health monitoring. However, a typical difficulty in practical processes is the control of working conditions for biorecognition elements, e.g., pH level and ionic strength in sweat may decrease the affinity between analytes and recognition elements. Here, we developed a wearable sensing device for cortisol detection in sweat using an aptamer as the recognition element. The device integrated functions of sweat collection, reagent prestorage, and signal conversion. Especially, the components of prestored reagents were optimized according to the inherent characteristics of sweat samples and electrodes, which allowed us to keep optimal conditions for aptamers. The sweat samples were transferred from the inlet of the device to the reagent prestored chamber, and the dry preserved reagents were rehydrated with sweat and then arrived at the aptamer-modified electrodes. Sweat samples of volunteers were analyzed by the wearable sensing device, and the results showed a good correlation with those of the ELISA kit. We believe that this convenient and reliable wearable sensing device has significant potential in self-health monitoring.

Integrated Bioinformatics and Machine Learning Analysis Identify ACADL as a Potent Biomarker of Reactive Mesothelial Cells.

Mesothelial cells with reactive hyperplasia are difficult to distinguish from malignant mesothelioma cells on cell morphology. This study aimed to identify and validate potential biomarkers that distinguish mesothelial cells from mesothelioma cells through machine learning combined with immunohistochemistry experiments. This study integrated the gene expression matrix from three Gene Expression Omnibus data sets (GSE2549, GSE12345, and GSE51024) to analyze the differently expressed genes between normal and mesothelioma tissues. Then, three machine learning algorithms, least absolute shrinkage and selection operator, support vector machine-recursive feature elimination, and random forest were used to screen and obtain four shared candidate markers, including ACADL, EMP2, GPD1L, and HMMR. The receiver operating characteristic curve analysis showed that the area under the curve for distinguishing normal from mesothelioma was 0.976, 0.943, 0.962, and 0.956, respectively. The expression and diagnostic performance of these candidate genes were validated in another two independent data sets (GSE42977 and GSE112154), indicating that the performances of ACADL, GPD1L, and HMMR were consistent between the training and validation data sets. Finally, the optimal candidate marker ACADL was verified by immunohistochemistry assay. ACADL was stained strongly in mesothelial cells, especially for reactive hyperplasic mesothelial cells, but was negative in malignant mesothelioma cells. Therefore, ACADL has the potential to be used as a specific marker of reactive hyperplasic mesothelial cells in the differential diagnosis of mesothelioma.

Large-scale uterine myoma MRI dataset covering all FIGO types with pixel-level annotations.

Uterine myomas are the most common pelvic tumors in women, which can lead to abnormal uterine bleeding, abdominal pain, pelvic compression symptoms, infertility, or adverse pregnancy. In this article, we provide a dataset named uterine myoma MRI dataset (UMD), which can be used for clinical research on uterine myoma imaging. The UMD is the largest publicly available uterine MRI dataset to date including 300 cases of uterine myoma T2-weighted imaging (T2WI) sagittal patient images and their corresponding annotation files. The UMD covers 9 types of uterine myomas classified by the International Federation of Obstetrics and Gynecology (FIGO), which were annotated and reviewed by 11 experienced doctors to ensure the authority of the annotated data. The UMD is helpful for uterine myomas classification and uterine 3D reconstruction tasks, which has important implications for clinical research on uterine myomas.

Modulating Nucleation and Crystal Growth of Tin Perovskite Films for Efficient Solar Cells.

The performance of tin halide perovskite solar cells (PSCs) has been severely limited by the rapid crystallization of tin perovskites, which usually leads to an undesirable film quality. In this work, we tackle this issue by regulating the nucleation and crystal growth of tin perovskite films using a small Lewis base additive, urea. The urea-SnI2 interaction facilitates the formation of larger and more uniform clusters, thus accelerating the nucleation process. Additionally, the crystal growth process is extended, resulting in a high-quality tin perovskite film with compact morphology, increased crystallinity, and reduced defects. Consequently, the efficiency of tin PSCs is significantly increased from 10.42% to 14.22%. This work highlights the importance of manipulating the nucleation and crystal growth of tin perovskites to realize efficient tin PSCs.

Learning the cellular activity representation based on gene regulatory networks for prediction of tumor response to drugs.

Predicting the response of tumor cells to anti-tumor drugs is critical to realizing cancer precision medicine. Currently, most existing methods ignore the regulatory relationships between genes and thus have unsatisfactory predictive performance. In this paper, we propose to predict anti-tumor drug efficacy via learning the activity representation of tumor cells based on a priori knowledge of gene regulation networks (GRNs). Specifically, the method simulates the cellular biosystem by synthesizing a cell-gene activity network and then infers a new low-dimensional activity representation for tumor cells from the raw high-dimensional expression profile. The simulated cell-gene network mainly comprises known gene regulatory networks collected from multiple resources and fuses tumor cells by linking them to hotspot genes that are over- or under-expressed in them. The resulting activity representation could not only reflect the shallow expression profile (hotspot genes) but also mines in-depth information of gene regulation activity in tumor cells before treatment. Finally, we build deep learning models on the activity representation for predicting drug efficacy in tumor cells. Experimental results on the benchmark GDSC dataset demonstrate the superior performance of the proposed method over SOTA methods with the highest AUC of 0.954 in the efficacy label prediction and the best R2 of 0.834 in the regression of half maximal inhibitory concentration (IC50) values, suggesting the potential value of the proposed method in practice.

Improved Cycling Stability of Ni-Rich Cathode Material by In Situ Introduced TM-B-O Amorphous Surface Structure.

Current research has found the amorphous/crystal interface has some unexpected electrochemical behaviors. This work designed a surface modification strategy using NaBH4 to induce in situ conversion of the surface structure of Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) into TM-B-O amorphous interface layer. Oxidizing the surface from transition metals (TM) with high valence and reductive BH4- in a weak polar medium of ethanol results in an easy redox reacton. A TM-B-O amorphous structure is formed on NCM811 surface. The action of reactive wetting ensures a complete and uniform structure evolution of the surface crystals. The complete coverage protects the outer crystal and the heterogeneous interface impedance between the modified layer and bulk is reduced. More importantly, this amorphous interface layer through in situ conversion enhances the heterogeneous link at interface and its own structural stability. The modified NCM811 (TB2@NCM) treated with 1 wt % NaBH4 shows excellent electrochemical performance, especially cyclic stability. At a high cutoff voltage of 4.5 V, the capacity retention was 72.5% at 1 C after 500 cycles. The electrode achieves 173.7 mAh·g-1 at 10 C. This work creates a modifying strategy with potential application prospect due to simple technology with low-cost raw material under mild operating conditions.

Human Seminal Extracellular Vesicles Enhance Endometrial Receptivity Through Leukemia Inhibitory Factor.

Seminal extracellular vesicles (EVs) contain different subgroups that have diverse effects on sperm function. However, the effect of seminal EVs-especially their subgroups-on endometrial receptivity is largely unknown. Here, we found that seminal EVs could be divided into high-density EVs (EV-H), medium density EVs, and low-density EVs after purification using iodixanol. We demonstrated that EV-H could promote the expression and secretion of leukemia inhibitor factor (LIF) in human endometrial cells. In EV-H-treated endometrial cells, we identified 1274 differentially expressed genes (DEGs). DEGs were enriched in cell adhesion and AKT and STAT3 pathways. Therefore, we illustrated that EV-H enhanced the adhesion of human choriocarcinoma JAr cell spheroids to endometrial cells through the LIF-STAT3 pathway. Collectively, our findings indicated that seminal EV-H could regulate endometrial receptivity through the LIF pathway, which could provide novel insights into male fertility.

Personalized anti-tumor drug efficacy prediction based on clinical data.

Anti-tumor drug efficacy prediction poses an unprecedented challenge to realizing personalized medicine. This paper proposes to predict personalized anti-tumor drug efficacy based on clinical data. Specifically, we encode the clinical text as numeric vectors featured with hidden topics for patients using Latent Dirichlet Allocation model. Then, to classify patients into two classes, responsive or non-responsive to a drug, drug efficacy predictors are established by machine learning based on the Latent Dirichlet Allocation topic representation. To evaluate the proposed method, we collected and collated clinical records of lung and bowel cancer patients treated with platinum. Experimental results on the data sets show the efficacy and effectiveness of the proposed method, suggesting the potential value of clinical data in cancer precision medicine. We hope that it will promote the research of drug efficacy prediction based on clinical data.

The chemokine CCL20 can assist AFP in serological diagnosis of hepatocellular carcinoma.

The chemokine 20 (CCL20) is a member of the CC chemokine family and plays a role in tumor immunity and autoimmune disease. This work investigated the value of CCL20 as a serum diagnostic marker for primary hepatocellular carcinoma (HCC). Based on the data of hepatocellular carcinoma patients in the TCGA database, the up-regulated genes encoding secretory proteins were analyzed in each pathological stage, and the candidate marker CCL20 gene was selected. Serum concentrations of CCL20 in patients with primary HCC, benign liver disease, and healthy subjects were analyzed by enzyme-linked immunosorbent assay (ELISA). The ROC curve evaluated the efficacy of CCL20 alone or in combination with AFP in the diagnosis of HCC. It was found the expression of CCL20 in HCC patients was significantly higher than that in the benign liver disease group and healthy controls (P < 0.05); The AUC of ROC curve to distinguish HCC patients from healthy controls was 0.859, the sensitivity was 73.42%, and the specificity was 86.84%. After combination with AFP, the AUC increased to 0.968, the sensitivity was 88.16%, and the specificity was 97.37%. Although CCL20 was increased in the serum of patients with benign liver diseases, combined with AFP, the AUC to distinguish HCC patients from non-HCC cohorts (benign liver disease group and healthy control group) was 0.902, with a sensitivity of 91.67% and a specificity of 75.26%. Collectively, serum CCL20 is closely related to the occurrence of HCC, and detection of serum CCL20 can assist AFP in improving the diagnostic sensitivity of HCC.

Construction of heterostructured Fe2O3/Fe7S8 hollow fibers to boost the electrochemical kinetics of lithium storage.

Heterostructured Fe2O3/Fe7S8 hollow fibers were rationally designed and synthesized via the electrospinning technique, followed by a calcination process and sulfuration treatment. Benefitting from the synergistic effect of the hollow structure and the built-in electric field induced by the heterostructure, the as-prepared Fe2O3/Fe7S8 composite anode exhibits high specific capacity (947 mA h g-1 after 100 cycles at 0.2 A g-1), excellent rate capability, and long-term cycling stability (730 mA h g-1 after 1000 cycles at 1 A g-1).

Interface engineering of metal sulfides-based composites enables high-performance anode materials for sodium-ion batteries.

Metal sulfides (MSs) have attracted much attention as anode materials for sodium-ion batteries (SIBs) due to their high sodium storage capacity. However, the unsatisfactory electrochemical performance induced by the huge volume change and sluggish kinetics hampered the practical application of SIBs. Herein, guided by the heterostructure interface engineering, novel multicomponent metal sulfide-based anodes, including SnS, FeS, and Fe3N embedded in N-doped carbon nanosheets (SnS/FeS/Fe3N/NC NSs), have been synthesized for high-performance SIBs. The as-prepared SnS/FeS/Fe3N/NC NSs with abundant heterointerfaces and high conductivity of N-doped carbon nanosheet matrix can shorten the Na+ diffusion path and promote reaction kinetics during the sodiation/desodiation process. Moreover, the presence of Fe3N can promote the reversible conversion of SnS and FeS during the cycling process. As a consequence, when evaluated as anode materials for SIBs, the SnS/FeS/Fe3N/NC NSs can maintain a high sodium storage capacity of 473.6 mAh g-1 after 600 cycles at 2.0 A g-1 and can still provide a high reversible capacity of 537.4 mAh g-1 even at 5.0 A g-1 This discovery offers a novel strategy for constructing metal sulfide-based anode materials for high-performance SIBs.

Lycopene inhibits apoptosis of mouse spermatocytes in varicocele via miR-23a/b-induced downregulation of PROK2.

Context The varicocele is the leading cause of male infertility and can impair sperm quality and testicular function through various mechanisms. In our previous study, we found that lycopene could attenuate hypoxia-induced testicular injury. Aims To illustrate the detailed mechanism of lycopene on spermatocytes. Methods The effect of lycopene on GC-2 cells under hypoxia were detected by flow cytometry and western blot assay. miR-seq was used to determine miRNA expression in varicocele rat model testes. The function of miR-23a/b were determined by flow cytometry and western blot assay. Key results We demonstrate that lycopene could alleviate hypoxia-induced GC-2 cell apoptosis and could elevate miR-23a/b expression of the hypoxia model in vivo and in vitro . The miR-23a and -23b mimics could reduce the hypoxia-induced GC-2 cell apoptosis. Both miR-23a and -23b could directly bind with prokineticin 2 (PROK2) mRNA and downregulate its expression. Conclusions Lycopene could attenuate hypoxia-induced spermatocyte injury through the miR-23a/b-PROK2 pathway. Implications Lycopene may be an effective treatment for varicocele to improve testicular impairment.

Pulsed Laser Manufactured Heteroatom Doped Carbon Dots via Heterocyclic Aromatic Hydrocarbons for Improved Tribology Performance.

Traditional laser-assisted method (top-down synthesis strategy) is applied in the preparation of carbon dots (CDs) by cutting larger carbon materials, which requires harsh conditions, and the size distribution of the CDs is seldom monodisperse. In this work, heteroatom-doped CDs, represented by N,S co-doped CDs (N,S-CDs), can be prepared successfully by pulsed laser irradiation of heterocyclic aromatic hydrocarbons-based small molecule compound solution. The friction coefficient (COF) of base oil PAO decreases from 0.650 to 0.093, and the wear volume reduces by 92.0% accompanied by 1 wt.% N,S-CDs addition, while the load-bearing capacity is improved from 100 to 950 N. The excellent lubrication performance is mainly attributed to the formation of a robust tribofilm via a tribochemical reaction between N,S-CDs and friction pairs, and the N,S-CDs can play a mending effect and polishing effect for worn surfaces. Furthermore, the lubricant containing heteroatom doped CDs are capable of being prepared in situ via pulsed laser irradiation of heterocyclic aromatic hydrocarbons in base oil, which can avoid the redispersed problem of nano-additive in base oil to maintain long-term dispersion, with COF of 0.103 and low wear volume ≈1.99 × 105 µm3 (76.9% reduction) even after standing for 9 months.

Development of a Highly Sensitive, Visual Platform for the Detection of Cadmium in Actual Wastewater Based on Evolved Whole-Cell Biosensors.

A whole-cell biosensor (WCB) is a convenient and cost-effective method for detecting contaminants. However, the practical application of the cadmium WCBs has been hampered by performance deficiencies, such as low sensitivity, specificity, and responsive strength. In this study, to improve the performance of cadmium WCBs, the cadmium transcription factor (CadC) and its DNA binding site (CadO), the key sensing module of the biosensor, were successively and separately subjected to a two-step directed evolution: 6-round random mutagenesis for CadC and 2-round saturation mutagenesis for CadO. For practical application, the GFP reporter gene was replaced with the lacZ gene and a facile and rapid smartphone detection platform for actual water samples was established by optimizing the reaction systems with detergents. The results showed that the evolved cadmium fluorescent biosensor CadO66 exhibited a higher specificity and a detection limit of 0.034 µg/L, representing a 19-fold reduction compared to the wild-type cadmium biosensor. The detergent sodium dodecylbenzenesulfonate effectively enhanced the visualization of WCB B0033-lacZ. Using the fluorescent WCB CadO66 and the visual WCB B0033-lacZ to analyze the cadmium contents of the actual water samples, the results were also consistent with a graphite furnace atomic absorption spectrometer. Taken together, this study indicates that the two-step directed evolution of CadC and CadO can efficiently improve the performance of cadmium WCBs, further promoting the utilization of WCB in actual sample detection and presenting a promising and feasible method for rapid sample detection.

Carbon Dots with Spatially-Mediated-N/S-Co-Doping Enabling One-Year Stable Lubricant with Oil Leakage Detection Capability.

The dispersion stability of nano-lubricating additives is crucial for the shelf life of lubricant and its practical applications. Nitrogen-sulfur co-doped carbon dots (N,S@CDs) via a one-step hydrothermal method with nitropyrene and thiourea as raw materials are hereby presented. The N and S elements are selectively distributed throughout the entire carbon skeleton with a doping amount of 22.6 at%. The as-synthesized N,S@CDs exhibit excellent dispersion stability in PEG200 and maintain stability for over one year. The experiment results indicate that N,S@CDs significantly improve the anti-wear and friction reduction properties of PEG200, while the friction coefficient is reduced from 0.25 to 0.09 with 1.5 wt% N,S@CDs addition, and the wear volume, depth, and width are reduced by 68%, 52%, and 57%, respectively. The good lubrication performance is attributed to N,S@CDs excellent dispersion stability, enhanced filling and polishing effects, and complex tribochemical reactions caused by heteroatom doping to form a stable protective film on the worn surface. Furthermore, the as-prepared N,S@CDs exhibit intrinsic fluorescence intensity in PEG200 with the photoluminescence quantum yield (PLQY) of 12.5% and remain fluorescent stable during the long-term friction process, therefore the N,S@CDs have a potential application prospect in non-destructive detection of oil leakage via fluorescence labeling method.

Dual Buried Interface Engineering for Improving Air-Processed Inverted FAPbI3 Perovskite Solar Cells.

Fabricating perovskite solar cells (PSCs) in an ambient environment provides low-cost preparation routes for solar cells that are suitable for large-scale production. Compared with methylammonium (MA)- based perovskite materials, formamidinium lead iodide (FAPbI3) possesses a more favorable bandgap for light harvesting and better thermostability. However, the phase transition from the α-phase to the δ-phase easily occurs, making it challenging for ambient-air processing. Herein, we develop a buried interface engineering strategy via two molecules including 1,4-bis(diphenylphosphino)butane (DPPB) as well as [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl] phosphonic acid (Me-4PACz) to optimize air-processed inverted FAPbI3 PSCs. This strategy regulates the crystallization process of the air-fabricated FAPbI3 perovskite film, leading to a purer α-phase with significantly enhanced crystallinity and enlarged grain sizes. Apart from improving the bulk perovskite film, the defects at the NiOx/perovskite interface are passivated, and the energy levels are better matched in the modified device, which facilitates efficient carrier extraction. Resultantly, the target device processed in the open air achieves a dramatically improved power conversion efficiency from 11.37% to 18.45%, in association with an enhanced device stability.