Ultrauniform Plating of Lithium on 10-nm-Scale Ordered Carbon Grids for Long Lifespan Lithium Metal Batteries.

Tailorable lithium (Li) nucleation and uniform early-stage plating is essential for long-lifespan Li metal batteries. Among factors influencing the early plating of Li anode, the substrate is critical, but a fine control of the substrate structure on a scale of ≈10 nm has been rarely achieved. Herein, a carbon consisting of ordered grids is prepared, as a model to investigate the effect of substrate structure on the Li nucleation. In contrast to the individual spherical Li nuclei formed on the flat graphene, an ultrauniform and nuclei-free Li plating is obtained on the ordered carbon with a grid size smaller than the thermodynamical critical radius of Li nucleation (≈26 nm). Simultaneously, an inorganic-rich solid-electrolyte-interphase is promoted by the cross-sectional carbon layers of such ordered grids which are exposed to the electrolyte. Consequently, the carbon grids with a grid size of ≈10 nm show a favorable cycling stability for more than 1100 cycles measured at 2 mA cm-2 in a half cell. With LiNi0.8Co0.1Mn0.1O2 as cathode, the assembled full cell with a cathode capacity of 3 mAh cm-2 and a negative/positive ratio of 1.67 demonstrates a stable cycling for over 130 cycles with a capacity retention of 88%.

Photochromism and single-component white light emission from a metalloviologen complex based on 1,5-naphthyridine.

Metalloviologens, as emerging electron-transfer photochromic compounds, have shown intriguing properties such as radiochromism, photochromism and photoconductance. However, only a limited number of them have been reported so far. Exploration of new metalloviologens is strongly desired. Herein, we report a new solvothermally synthesized metalloviologen complex [CdCl2(ND)2]n (1, ND = 1,5-naphthalenes) that exhibits photochromic and intrinsic white light emission properties. Density functional theory calculation results reveal that the photochromism could be assigned to photoinduced electron transfer from chlorine atoms to ND molecules. The photoinduced charge-separated states are heat/air stable, attributed to the delocalization of ND and strong intermolecular π-π interactions. Besides, complex 1 consistently emits intrinsic white light when excited with 340-370 nm UV light, achieving high color rendering index (CRI) values (82.54-94.04). By adjusting the excitation wavelength, both "warm" and "cold" white light emission can be produced, making it suitable for the application of a white light emitting diode (WLED). Thus, this work demonstrates that the ND-based metalloviologen is not only helpful in producing photochromism, but also beneficial for creating white-light emission.

Solid-State Lithium Batteries with Ultrastable Cyclability: An Internal-External Modification Strategy.

A commonly used strategy to tackle the unstable interfacial problem between Li1.3Al0.3Ti1.7(PO4)3 (LATP) and lithium (Li) is to introduce an interlayer. However, this strategy has a limited effect on stabilizing LATP during long-term cycling or under high current density, which is due in part to the negative impact of its internal defects (e.g., gaps between grains (GBs)) that are usually neglected. Here, control experiments and theoretical calculations show clearly that the GBs of LATP have higher electronic conductivity, which significantly accelerates its side reactions with Li. Thus, a simple LiCl solution immersion method is demonstrated to modify the GBs and their electronic states, thereby stabilizing LATP. In addition to LiCl filling, composite solid polymer electrolyte (CSPE) interlayering is concurrently introduced at the Li/LATP interface to realize the internal-external dual modifications for LATP. As a result, electron leakage in LATP can be strictly inhibited from its interior (by LiCl) and exterior (by CSPE), and such dual modifications can well protect the Li/LATP interface from side reactions and Li dendrite penetration. Notably, thus-modified Li symmetrical cells can achieve ultrastable cycling for more than 3500 h at 0.4 mA cm-2 and 1500 h at 0.6 mA cm-2, among the best cycling performance to date.

Design Strategy for Improving Detection Sensitivity in a Bromoplumbate Photochromic Semiconductor.

Reducing the dark current of photodetectors is an important strategy for enhancing the detection sensitivity, but hampered by the manufacturing cost due to the need for controlling the complex material composition and processing intricate interface. This study reports a new single-component photochromic semiconductor, [(HDMA)4(Pb3Br10)(PhSQ)2]n (1, HDMA = dimethylamine cation, PhSQ = 1-(4-sulfophenyl)-4,4'-bipyridinium), by introducing a redox-active monosubstituted viologen zwitterion into inorganic semiconducting skeleton. It features yellow to green coloration after UV irradiation with the sharply dropping intrinsic conductivity of 14.6-fold, and the photodetection detection sensitivity gain successfully doubles. The reason of decreasing conductivity originates from the increasing the band gap of the inorganic semiconducting component and formation of Frenkel excitons with strong Coulomb interactions, thereby decreasing the concentration of thermally excited intrinsic carriers.

Electrolyte Engineering Empowers Li||CFx Batteries to Achieve High Energy Density and Low Self-Discharge at Harsh Conditions.

Given its exceptional theoretical energy density (over 2000 Wh kg-1), lithium||carbon fluoride (Li||CFx) battery has garnered global attention. N-methylpyrrolidone (NMP)-based electrolyte is regarded as one promising candidate for tremendously enhancing the energy density of Li||CFx battery, provided self-discharge challenges can be resolved. This study successfully achieves a low self-discharge (LSD) and desirable electrochemical performance in Li||CFx batteries at high temperatures by utilizing NMP as the solvent and incorporating additional ingredients, including vinylene carbonate additive, as well as the dual-salt systems formed by LiBF4 with three different Li salts, namely lithium bis(oxalato)borate, lithium difluoro(oxalato)borate, and LiNO3. The experimental results unfold that the proposed methods not only minimize aluminum current collector corrosion, but also effectively passivate the Li metal anode. Among them, LiNO3 exhibits the most pronounced effect that achieves an energy density of ≈2400 Wh kg-1 at a current density of 10 mA g-1 at 30 °C, nearly 0% capacity-fade rate after 300 h of storage at 60 °C, and the capability to maintain a stable open-circuit voltage over 4000 h. This work provides a distinctive perspective on how to realize both high energy density and LSD rates at high temperature of Li||CFx battery.

Thermally Activated Delayed Fluorescence (TADF)-active Coinage-metal Sulfide Clusters for High-resolution X-ray Imaging.

The study of facile-synthesis and low-cost X-ray scintillators with high light yield, low detection limit and high X-ray imaging resolution plays a vital role in medical and industrial imaging fields. However, the optimal balance between X-ray absorption, decay lifetime and excitonic utilization efficiency of scintillators to achieve high-resolution imaging is extremely difficult due to the inherent contradiction. Here two thermally activated delayed fluorescence (TADF)-actived coinage-metal clusters M6 S6 L6 (M=Ag or Cu) were synthesized by simple solvothermal reaction, where the cooperation of heavy atom-rich character and TADF mechanism supports strong X-ray absorption and rapid luminescent collection of excitons. Excitingly, Ag6 S6 L6 (SC-Ag) displays a high photoluminescence quantum yield of 91.6 % and scintillating light yield of 17420 photons MeV-1 , as well as a low detection limit of 208.65 nGy s-1 that is 26 times lower than the medical standard (5.5 µGy s-1 ). More importantly, a high X-ray imaging resolution of 16 lp/mm based on SC-Ag screen is demonstrated. Besides, rigid core skeleton reinforced by metallophilicity endows clusters M6 S6 L6 strong resistance to humidity and radiation. This work provides a new view for the design of efficient scintillators and opens the research door for silver clusters in scintillation application.

Significant increase of the photoresponse range and conductivity for a chalcogenide semiconductor by viologen coating through charge transfer.

Widening the photoresponse range while enhancing the electrical properties of semiconductors could reduce the complexity and cost of photodetectors or increase the power conversion efficiency of solar cells. Surface doping through charge transfer with organic species is one of the most effective and widely used approaches to achieve this aim. It usually features easier preparation over other doping methods but is still limited by the low physicochemical stability and high cost of the used organic species or low improvement of electrical properties. This work shows unprecedented surface doping of semiconductors with highly stable, easily obtained, and strong electron-accepting viologen components, realizing the significant improvement of both the photoresponse range and conductivity. Coating the chalcogenide semiconductor KGaS2 with dimethyl viologen dichloride (MV) yields a charge-transfer complex (CTC) on the surface, which broadens the photoresponse range by nearly 300 nm and improves the conductivity by 5 orders of magnitude. The latter value surpasses all records obtained by surface doping through charge transfer with organic species.

Photoinduced large magnetic change at room temperature and radical-quenched spin glass in a cyanide-bridged MnII-FeIII compound.

By the coordination assembly of a redox photoactive functional motif and a cyanide-bridged moiety, a cyanide-bridged MnII-FeIII compound with large photoinduced magnetic change at room-temperature due to photoinduced electron transfer was obtanied. This compound also shows unprecedented radical-quenched spin glass in molecule based magnets.

Bottom-Up Photosynthesis of an Air-Stable Radical Semiconductor Showing Photoconductivity to Full Solar Spectrum and X-Ray.

Single-component semiconductors with photoresponse to full solar spectrum are highly desirable to simplify the device structure of commercial photodetectors and to improve solar conversion or photocatalytic efficiency but remain scarce. This work reports bottom-up photosynthesis of an air-stable radical semiconductor using BiI3 and a photochromism-active benzidine derivative as a photosensitive functional motif. This semiconductor shows photoconductivity to full solar spectrum contributed by radical and non-radical forms of the benzidine derivative. It has also the potential to detect X-rays because of strong X-ray absorption coefficient. This finding opens up a new synthetic method for radical semiconductors and may find applications on extending photoresponsive ranges of perovskites, transition metal sulfides, and other materials.

Toughening oxide glasses through paracrystallization.

Glasses, unlike crystals, are intrinsically brittle due to the absence of microstructure-controlled toughening, creating fundamental constraints for their technological applications. Consequently, strategies for toughening glasses without compromising their other advantageous properties have been long sought after but elusive. Here we report exceptional toughening in oxide glasses via paracrystallization, using aluminosilicate glass as an example. By combining experiments and computational modelling, we demonstrate the uniform formation of crystal-like medium-range order clusters pervading the glass structure as a result of paracrystallization under high-pressure and high-temperature conditions. The paracrystalline oxide glasses display superior toughness, reaching up to 1.99 ± 0.06 MPa m1/2, surpassing any other reported bulk oxide glasses, to the best of our knowledge. We attribute this exceptional toughening to the excitation of multiple shear bands caused by a stress-induced inverse transformation from the paracrystalline to amorphous states, revealing plastic deformation characteristics. This discovery presents a potent strategy for designing highly damage-tolerant glass materials and emphasizes the substantial influence of atomic-level structural variation on the properties of oxide glasses.

Pressure-Stabilized High-Entropy (FeCoNiCuRu)S2 Sulfide Anode toward Simultaneously Fast and Durable Lithium/Sodium Ion Storage.

Pressure-stabilized high-entropy sulfide (FeCoNiCuRu)S2 (HES) is proposed as an anode material for fast and long-term stable lithium/sodium storage performance (over 85% retention after 15 000 cycles @10 A g-1 ). Its superior electrochemical performance is strongly related to the increased electrical conductivity and slow diffusion characteristics of entropy-stabilized HES. The reversible conversion reaction mechanism, investigated by ex-situ XRD, XPS, TEM, and NMR, further confirms the stability of the host matrix of HES after the completion of the whole conversion process. A practical demonstration of assembled lithium/sodium capacitors also confirms the high energy/power density and long-term stability (retention of 92% over 15 000 cycles @5 A g-1 ) of this material. The findings point to a feasible high-pressure route to realize new high-entropy materials for optimized energy storage performance.

Regulating the Wettability of Hard Carbon through Open Mesochannels for Enhanced K+ Storage.

Hard carbons are deemed as promising anode materials for high-performance potassium-ion battery, but their commercialization is still hindered by the insufficient K+ transfer kinetics and poor potassiophilicity. Herein, these issues are addressed by improving the wettability of hard carbon, which can be achieved by the introduction of open mesochannels. A series of such hollow mesoporous carbon capsules with different dimensions are synthesized, which exhibit markedly enhanced wettability with electrolyte compared to the microporous counterparts. Various characterizations confirm its effects on promoting the kinetics and potassiophilicity of as-synthesized carbons, which can be additionally improved by S-doping. As a result, the 2D mesoporous carbon anode exhibits excellent rate capability (122.2 mAh g-1 at 4 A g-1 ), high reversible capacity (396.6 mAh g-1 at 0.1 A g-1 after 200 cycles), and outstanding cycling stability (197.0 mAh g-1 at 2 A g-1 after 1400 cycles). In addition, the hollow mesoporous architecture can effectively buffer the volume expansion and thus stabilize the carbon anodes, as visualized by in situ transmission electron microscopy. This work provides new insight for enhanced K+ storage performance from the perspective of anode wettability with electrolyte, as well as a universal anode design that combines mesochannels architecture with heteroatom doping.

Superfast Mass Transport of Na/K Via Mesochannels for Dendrite-Free Metal Batteries.

Fast ion diffusion in anode hosts enabling uniform distribution of Li/Na/K is essential for achieving dendrite-free alkali-metal batteries. Common strategies, e.g. expanding the interlayer spacing of anode materials, can enhance bulk diffusion of Li but are less efficient for Na and K due to their larger ionic radius. Herein, a universal strategy to drastically improve the mass-transport efficiency of Na/K by introducing open mesochannels in carbon hosts is proposed. Such pore engineering can increase the accessible surface area by one order of magnitude, thus remarkably accelerating surface diffusion, as visualized by in situ transmission electron microscopy. In particular, once the mesochannels are filled by the Na/K metals, they become the superfast channels for mass transport via the mechanism of interfacial diffusion. Thus-modified carbon hosts enable Na/K filling in their inner cavities and uniform deposition across the whole electrodes with fast kinetics. The resulting Na-metal anodes can exhibit stable dendrite-free cycling with outstanding rate performance at a high current density of up to 30 mA cm-2 . This work presents an inspiring attempt to address the sluggish transport issue of Na/K, as well as valuable insights into the mass-transport mechanism in porous anodes for high-performance alkali-metal storage.

Barriers to Health and Social Services for Unaccounted-For Female Migrant Workers and Their Undocumented Children with Precarious Status in Taiwan: An Exploratory Study of Stakeholder Perspectives.

Unaccounted-for migrant workers (UMWs), who have left their employment placement and whose whereabouts are unknown, make up a vulnerable population in Taiwan. The children of UMWs have a particularly precarious status because they are undocumented/stateless, immigrant, and young. Living with this precarious status limits their children's rights to survival and development. Moreover, services for female UMWs and their undocumented children are underdeveloped. This study explores the accessibility and availability of social services for UMWs and undocumented children, based on interviews with 12 stakeholders from multiple systems, including a local government, a child welfare placement center, a migrant worker detention center, a hospital, a regional religious center, and a foreign country office. Preliminary findings indicate the following: First, UMWs' rights to healthcare are not preserved, and they experience greater prenatal risks because their illegal status excludes them from universal health coverage. Second, undocumented children's rights to survival and development are concerning because these children can be placed in residential care without individualized care or environmental stimulation. Third, children's rights to cultural identity and permanency are uncertain in that repatriation or adoption does not guarantee their future best interests.

Exclusion or Inclusion: National Differential Regulations of Migrant Workers' Employment, Social Protection, and Migrations Policies on Im/Mobilities in East Asia-Examples of South Korea and Taiwan.

Low fertility rates and an aging society, growing long-term care needs, and workforce shortages in professional, industrial, and care sectors are emerging issues in South Korea and Taiwan. Both governments have pursued economic/industrial growth as productive welfare capitalism and enacted preferred selective migration policies to recruit white-collar migrant workers (MWs) as mobile elites, but they have also adopted regulations and limitations on blue-collar MWs through unfree labor relations, precarious employment, and temporary legal status to provide supplemental labor. In order to demonstrate how multiple policy regulations from a national level affect MWs' precarity of labor in their receiving countries, which in turn affect MWs' im/mobilities, this article presents the growing trends of transnational MWs, regardless of them being high- or low-skilled MWs, and it evaluates four dimensions of labor migration policies-MWs' working and employment conditions, social protection, union rights and political participation, and access to permanent residency in both countries. We found that the rights and working conditions of low-skilled MWs in Korea and Taiwan are improving slowly, but still lag behind those of high-skilled MWs which also affects their public health and well-being. The significant difference identified here is that MWs in Taiwan can organize labor unions, which is strictly prohibited in Korea; pension protection also differs between the nations. Additionally, an application for permanent residency is easier for high-skilled migrant workers compared with low-skilled MWs and both the Korean and Taiwanese immigration policies differentiate the entry and resident status for low-skilled and professional MWs from dissimilar class backgrounds. Policy recommendations for both countries are also discussed.

Boosting the potassium-ion storage performance enabled by engineering of hierarchical MoSSe nanosheets modified with carbon on porous carbon sphere.

Developing suitable electrode materials capable of tolerating severe structural deformation and overcoming sluggish reaction kinetics resulting from the large radius of potassium ion (K+) insertion is critical for practical applications of potassium-ion batteries (PIBs). Herein, a superior anode material featuring an intriguing hierarchical structure where assembled MoSSe nanosheets are tightly anchored on a highly porous micron-sized carbon sphere and encapsulated within a thin carbon layer (denoted as Cs@MoSSe@C) is reported, which can significantly boost the performance of PIBs. The assembled MoSSe nanosheets with expanded interlayer spacing and rich anion vacancy can facilitate the intercalation/deintercalation of K+ and guarantee abundant active sites together with a low K+ diffusion barrier. Meanwhile, the thin carbon protective layer and the highly porous carbon sphere matrix can alleviate the volume expansion and enhance the charge transport within the composite. Under these merits, the as-prepared Cs@MoSSe@C anode exhibits a high reversible capacity (431.8 mAh g-1 at 0.05 A g-1), good rate capability (161 mAh g-1 at 5 A g-1), and superior cyclic performance (70.5% capacity retention after 600 cycles at 1 A g-1), outperforming most existing Mo-based S/Se anodes. The underlying mechanisms and origins of superior performance are elucidated by a set of correlated in-situ/ex-situ characterizations and theoretical calculations. Further, a PIB full cell based on Cs@MoSSe@C anode also exhibits an impressive electrochemical performance. This work provides some insights into developing high-performance PIBs anodes with transition-metal chalcogenides.

Visualizing the failure of solid electrolyte under GPa-level interface stress induced by lithium eruption.

Solid electrolytes hold the promise for enabling high-performance lithium (Li) metal batteries, but suffer from Li-filament penetration issues. The mechanism of this rate-dependent failure, especially the impact of the electrochemo-mechanical attack from Li deposition, remains elusive. Herein, we reveal the Li deposition dynamics and associated failure mechanism of solid electrolyte by visualizing the Li|Li7La3Zr2O12 (LLZO) interface evolution via in situ transmission electron microscopy (TEM). Under a strong mechanical constraint and low charging rate, the Li-deposition-induced stress enables the single-crystal Li to laterally expand on LLZO. However, upon Li "eruption", the rapidly built-up local stress, reaching at least GPa level, can even crack single-crystal LLZO particles without apparent defects. In comparison, Li vertical growth by weakening the mechanical constraint can boost the local current density up to A·cm-2 level without damaging LLZO. Our results demonstrate that the crack initiation at the Li|LLZO interface depends strongly on not only the local current density but also the way and efficiency of mass/stress release. Finally, potential strategies enabling fast Li transport and stress relaxation at the interface are proposed for promoting the rate capability of solid electrolytes.

An Encapsulation-Based Sodium Storage via Zn-Single-Atom Implanted Carbon Nanotubes.

The properties of high theoretical capacity, low cost, and large potential of metallic sodium (Na) has strongly promoted the development of rechargeable sodium-based batteries. However, the issues of infinite volume variation, unstable solid electrolyte interphase (SEI), and dendritic sodium causes a rapid decline in performance and notorious safety hazards. Herein, a highly reversible encapsulation-based sodium storage by designing a functional hollow carbon nanotube with Zn single atom sites embedded in the carbon shell (ZnSA -HCNT) is achieved. The appropriate tube space can encapsulate bulk sodium inside; the inner enriched ZnSA sites provide abundant sodiophilic sites, which can evidently reduce the nucleation barrier of Na deposition. Moreover, the carbon shell derived from ZIF-8 provides geometric constraints and excellent ion/electron transport channels for the rapid transfer of Na+ due to its pore-rich shell, which can be revealed by in situ transmission electron microscopy (TEM). As expected, Na@ZnSA -HCNT anodes present steady long-term performance in symmetrical battery (>900 h at 10 mA cm-2 ). Moreover, superior electrochemical performance of Na@ZnSA -HCNT||PB full cells can be delivered. This work develops a new strategy based on carbon nanotube encapsulation of metallic sodium, which improves the safety and cycling performance of sodium metal anode.

Enhanced Cyclability of Lithium Metal Anodes Enabled by Anti-aggregation of Lithiophilic Seeds.

Constructing 3D skeletons modified with lithiophilic seeds has proven effective in achieving dendrite-free lithium metal anodes. However, these lithiophilic seeds are mostly alloy- or conversion-type materials, and they tend to aggregate and redistribute during cycling, resulting in the failure of regulating Li deposition. Herein, we address this crucial but long-neglected issue by using intercalation-type lithiophilic seeds, which enable antiaggregation owing to their negligible volume expansion and high electrochemical stability against Li. To exemplify this, a 3D carbon-based host is built, in which ultrafine TiO2 seeds are uniformly embedded in nitrogen-doped hollow porous carbon spheres (N-HPCSs). The TiO2@N-HPCSs electrode exhibits superior Coulombic efficiency, high-rate capability, and long-term stability when evaluated as compertitive anodes for Li metal batteries. Furthermore, the superiority of intercalation-type seeds is comprehensively revealed through controlled experiments by various in situ/ex situ electron and optical microscopies, which highlights the excellent structural stability and lithiophilicity of TiO2 nanoseeds upon repeated cycling.

sp2-to-sp3 transitions in graphite during cold-compression.

Pressure-induced sp2-to-sp3 transitions in graphite have been studied for decades by experiments and simulations. In general, pressures of 15-18 GPa are needed to initiate structural transitions in graphite at room temperature, and the high-pressure phases are usually unquenchable, as evidenced by in situ resistivity and optical transmittance measurements, X-ray diffraction (XRD), and inelastic X-ray scattering (IXS). However, our in situ Raman results show that the onset transition pressure can be as low as 9.7 GPa when using the methanol-ethanol-water (MEW) mixture as the pressure-transmitting medium (PTM), indicated by an additional GD Raman peak caused by the sp3 bonding between adjacent graphite layers. Moreover, using a combination of XRD, Raman, X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM), we show that a small amount of sp3 bonds associated with a unique feature of cross stacking are present in the recovered samples. Our findings will be useful to understand the intricate structural transitions in graphite-like materials under compression.