Self-enhancing sono-inks enable deep-penetration acoustic volumetric printing.

Volumetric printing, an emerging additive manufacturing technique, builds objects with enhanced printing speed and surface quality by forgoing the stepwise ink-renewal step. Existing volumetric printing techniques almost exclusively rely on light energy to trigger photopolymerization in transparent inks, limiting material choices and build sizes. We report a self-enhancing sonicated ink (or sono-ink) design and corresponding focused-ultrasound writing technique for deep-penetration acoustic volumetric printing (DAVP). We used experiments and acoustic modeling to study the frequency and scanning rate-dependent acoustic printing behaviors. DAVP achieves the key features of low acoustic streaming, rapid sonothermal polymerization, and large printing depth, enabling the printing of volumetric hydrogels and nanocomposites with various shapes regardless of their optical properties. DAVP also allows printing at centimeter depths through biological tissues, paving the way toward minimally invasive medicine.

Non-invasive Deep-Brain Imaging with 3D Integrated Photoacoustic Tomography and Ultrasound Localization Microscopy (3D-PAULM).

Photoacoustic computed tomography (PACT) is a proven technology for imaging hemodynamics in deep brain of small animal models. PACT is inherently compatible with ultrasound (US) imaging, providing complementary contrast mechanisms. While PACT can quantify the brain's oxygen saturation of hemoglobin (sO2), US imaging can probe the blood flow based on the Doppler effect. Further, by tracking gas-filled microbubbles, ultrasound localization microscopy (ULM) can map the blood flow velocity with sub-diffraction spatial resolution. In this work, we present a 3D deep-brain imaging system that seamlessly integrates PACT and ULM into a single device, 3D-PAULM. Using a low ultrasound frequency of 4 MHz, 3D-PAULM is capable of imaging the whole-brain hemodynamic functions with intact scalp and skull in a totally non-invasive manner. Using 3D-PAULM, we studied the mouse brain functions with ischemic stroke. Multi-spectral PACT, US B-mode imaging, microbubble-enhanced power Doppler (PD), and ULM were performed on the same mouse brain with intrinsic image co-registration. From the multi-modality measurements, we future quantified blood perfusion, sO2, vessel density, and flow velocity of the mouse brain, showing stroke-induced ischemia, hypoxia, and reduced blood flow. We expect that 3D-PAULM can find broad applications in studying deep brain functions on small animal models.

Comprehensive, Continuous, and Vertical Measurements of Seawater Constituents with Triple-Field-of-View High-Spectral-Resolution Lidar.

Measuring the characteristics of seawater constituent is in great demand for studies of marine ecosystems and biogeochemistry. However, existing techniques based on remote sensing or in situ samplings present various tradeoffs with regard to the diversity, synchronism, temporal-spatial resolution, and depth-resolved capacity of their data products. Here, we demonstrate a novel oceanic triple-field-of-view (FOV) high-spectral-resolution lidar (HSRL) with an iterative retrieval approach. This technique provides, for the first time, comprehensive, continuous, and vertical measurements of seawater absorption coefficient, scattering coefficient, and slope of particle size distribution, which are validated by simulations and field experiments. Furthermore, it depicts valuable application potentials in the accuracy improvement of seawater classification and the continuous estimation of depth-resolved particulate organic carbon export. The triple-FOV HSRL with high performance could greatly increase the knowledge of seawater constituents and promote the understanding of marine ecosystems and biogeochemistry.

Simultaneous profiling of dust aerosol mass concentration and optical properties with polarized high-spectral-resolution lidar.

Dust particles originating from arid desert regions can be transported over long distances, presenting severe risks to climate, environment, social economics, and human health at the source and downwind regions. However, there has been a dearth of continuous diurnal observations of vertically resolved mass concentration and optical properties of dust aerosols, which hinders our understanding of aerosol mixing, stratification, aerosol-cloud interactions, and their impacts on the environment. To fill the gap of the insufficient observations, to the best of our knowledge, this work presents the first high-spectral-resolution lidar (HSRL) observation providing days of continuous profiles of the mass concentration, along with particle linear depolarization ratio (PLDR), backscattering coefficient, extinction coefficient and lidar ratio (LR), simultaneously. We present the results of two strong dust events observed by HSRL over Beijing in 2021. The maximum particle mass concentrations reached (1.52 ± 3.5) x103 µg/m3 and (19.48 ± 0.36) x103 µg/m3 for the two dust events, respectively. The retrieved particle mass concentrations and aerosol optical depth (AOD) agree well with the observation from the surface PM10 concentrations and sun photometer with correlation coefficients of 0.90 and 0.95, respectively. The intensive properties of PLDR and LR of the dust aerosols are 0.31 ± 0.02 and 39 ± 7 sr at 532 nm, respectively, which are generally close to those obtained from observations in the downwind areas. Moreover, inspired by the observations from HSRL, a universal analytical relationship is discovered to evaluate the proportion of dust aerosol backscattering, extinction, AOD, and mass concentration using PLDR. The universal analytical relationship reveals that PLDR can directly quantify dust aerosol contribution, which is expected to further expand the application of polarization technology in dust detection. These valuable observations and findings further our understanding of the contribution of dust aerosol to the environment and help supplement dust aerosol databases.

Experimental demonstration of spectral suppression effect improvement for multi-longitudinal mode high-spectral-resolution lidar.

The multi-longitudinal mode high-spectral-resolution lidar (MLM-HSRL) is an effective technique for detecting atmospheric optical characteristics of aerosols. Due to the excessive longitudinal mode numbers, the current MLM-HSRL cannot obtain a well spectral suppression effect, which seriously affects the retrieval accuracy of the optical characteristic parameters. In this paper, a new index called Longitudinal Mode Rejection Ratio (LMRR) has been proposed to evaluate the spectral suppression effect of the MLM-HSRL; a novel mismatch error and mode control (MEMC) technique is proposed to improve the spectral suppression effect of the MLM-HSRL, which contributes to developing the scientific potential of the MLM-HSRL for aerosol remote sensing. Based on our self-developed MLM laser, through controlling the longitudinal mode frequency-pulled shift of the MLM laser, adjusting the total mismatch error, and reducing the longitudinal mode numbers, we realize the LMRR index improved from about 5 to over 30, and the working stability of the system is also promoted by decreasing the longitudinal mode numbers. The experiment well improves the spectral suppression effect and verifies the effectiveness of the proposed MEMC technique. To the best of our knowledge, for the first time, the study addresses the conundrum of the lower spectral suppression effect for the MLM-HSRL. This work would help to provide a powerful support for the high-precision, long-term, and stable operation of the MLM-HSRL in the future.

High-spectral-resolution LIDAR based on a few-longitudinal mode laser for aerosol and cloud characteristics detection.

A novel implementation of high-spectral-resolution LIDAR based on a passively Q-switched few-longitudinal mode laser (PQFLM-HSRL) is proposed, and the prototype is built for detecting aerosol and cloud characteristics. The spatial-temporal distributions of the aerosol and cloud are continuously observed by the PQFLM-HSRL for the first time, to the best of our knowledge. Based on observation, we present the retrieval results of backscatter coefficient, particle linear depolarization ratio, and LIDAR ratio, and these intensive parameters are used to classify the aerosol and cloud into different types. Particularly, we have observed mix-phased clouds. The resulting aerosol optical depths (AODs) are highly consistent with CE-318, the Sun photometer measurements of the local National Meteorological Station (NMS), which verify the retrieval accuracy and the system stability. In addition, the retrieved AODs also characterize the ambient air quality, which show a high correlation with the measured PM2.5 concentrations. The implementation of the PQFLM-HSRL provides a new method for atmospheric feature detection, which shows superior scientific potential for further study on climate change and environmental health.

Shipborne oceanic high-spectral-resolution lidar for accurate estimation of seawater depth-resolved optical properties.

Lidar techniques present a distinctive ability to resolve vertical structure of optical properties within the upper water column at both day- and night-time. However, accuracy challenges remain for existing lidar instruments due to the ill-posed nature of elastic backscatter lidar retrievals and multiple scattering. Here we demonstrate the high performance of, to the best of our knowledge, the first shipborne oceanic high-spectral-resolution lidar (HSRL) and illustrate a multiple scattering correction algorithm to rigorously address the above challenges in estimating the depth-resolved diffuse attenuation coefficient Kd and the particulate backscattering coefficient bbp at 532 nm. HSRL data were collected during day- and night-time within the coastal areas of East China Sea and South China Sea, which are connected by the Taiwan Strait. Results include vertical profiles from open ocean waters to moderate turbid waters and first lidar continuous observation of diel vertical distribution of thin layers at a fixed station. The root-mean-square relative differences between the HSRL and coincident in situ measurements are 5.6% and 9.1% for Kd and bbp, respectively, corresponding to an improvement of 2.7-13.5 and 4.9-44.1 times, respectively, with respect to elastic backscatter lidar methods. Shipborne oceanic HSRLs with high performance are expected to be of paramount importance for the construction of 3D map of ocean ecosystem.

Dual-field-of-view high-spectral-resolution lidar: Simultaneous profiling of aerosol and water cloud to study aerosol-cloud interaction.

SignificanceAerosol-cloud interaction affects the cooling of Earth's climate, mostly by activation of aerosols as cloud condensation nuclei that can increase the amount of sunlight reflected back to space. But the controlling physical processes remain uncertain in current climate models. We present a lidar-based technique as a unique remote-sensing tool without thermodynamic assumptions for simultaneously profiling diurnal aerosol and water cloud properties with high resolution. Direct lateral observations of cloud properties show that the vertical structure of low-level water clouds can be far from being perfectly adiabatic. Furthermore, our analysis reveals that, instead of an increase of liquid water path (LWP) as proposed by most general circulation models, elevated aerosol loading can cause a net decrease in LWP.

Design of a high-spectral-resolution lidar for atmospheric temperature measurement down to the near ground.

In this paper, a high-spectral-resolution lidar (HSRL) for profiling atmospheric temperature from the ground to 10 km is proposed. A double Nd:YAG laser produces the transmitted laser at 532 nm. The backscattering lidar signal is passed through two different saturated iodine-vapor filters and thus obtains molecular scattering signals that can be employed to determine the temperature. A coaxial postposition transceiver is constructed with an off-axis aspheric reflective telescope (OART). The design of the transceiver and that of the OART are demonstrated. With this transceiver, the lidar blind zone where the overlap factor is zero can be reduced greatly, and accurate temperature measurement for full elevation can be achieved. The whole system is optimized with theoretical models based on geometrical optics and statistical error analyses. Monte Carlo simulations display the performance of the designed HSRL, showing that the all-day temperature retrieval error is better than 1.4 K from the ground to 10 km. The proposed HSRL is expected to provide more accurate atmospheric auxiliary parameters for the detection of aerosols' optical characteristics.

Generalized high-spectral-resolution lidar technique with a multimode laser for aerosol remote sensing.

High-spectral-resolution lidar (HSRL) is a powerful tool for atmospheric aerosol remote sensing. The current HSRL technique often requires a single longitudinal mode laser as the transmitter to accomplish the spectral discrimination of the aerosol and molecular scattering conveniently. However, single-mode laser is cumbersome and has very strict requirements for ambient stability, making the HSRL instrument not so robust in many cases. In this paper, a new HSRL concept, called generalized HSRL technique with a multimode laser (MML-gHSRL), is proposed, which can work using a multimode laser. The MML-gHSRL takes advantage of the period characteristic of the spectral function of the interferometric spectral discrimination filter (ISDF) thoroughly. By matching the free spectral range of the ISDF with the mode interval of the multimode laser, fine spectral discrimination for the lidar return from each longitudinal mode can be realized. Two common ISDFs, i.e., the Fabry-Perot interferometer (FPI) and field-widened Michelson interferometer (FWMI), are introduced to develop the MML-gHSRL, and their performance is quantitatively analyzed and compared. The MML-gHSRL is a natural but significant generalization for the current HSRL technique based on the IDSF. It is potential that this technique would be a good entrance to future HSRL developments, especially in airborne and satellite-borne aerosol remote sensing applications.