RESUMEN
Plastic fragments are widely found in the soil profile of terrestrial ecosystems, forming plastic footprint and posing increasing threat to soil functionality and carbon (C) footprint. It is unclear how plastic footprint affects C cycling, and in particularly permanent C sequestration. Integrated field observations (including 13C labelling) were made using polyethylene and polylactic acid plastic fragments (low-, medium- and high-concentrations as intensifying footprint) landfilling in soil, to track C flow along soil-plant-atmosphere continuum (SPAC). The result indicated that increased plastic fragments substantially reduced photosynthetic C assimilation (p < 0.05), regardless of fragment degradability. Besides reducing C sink strength, relative intensity of C emission increased significantly, displaying elevated C source. Moreover, root C fixation declined significantly from 21.95 to 19.2 mg m-2, and simultaneously root length density, root weight density, specific root length and root diameter and surface area were clearly reduced. Similar trends were observed in the two types of plastic fragments (p > 0.05). Particularly, soil aggregate stability was significantly lowered as affected by plastic fragments, which accelerated the decomposition rate of newly sequestered C (p < 0.05). More importantly, net C rhizodeposition declined averagely from 39.77 to 29.41 mg m-2, which directly led to significant decline of permanent C sequestration in soil. Therefore, increasing plastic footprint considerably worsened C footprint regardless of polythene and biodegradable fragments. The findings unveiled the serious effects of plastic residues on permanent C sequestration across SPAC, implying that current C assessment methods clearly overlook plastic footprint and their global impact effects.
Asunto(s)
Huella de Carbono , Plásticos , Suelo , Suelo/química , Carbono/análisis , Atmósfera/química , Ciclo del Carbono , Ecosistema , Plantas , Secuestro de Carbono , Monitoreo del Ambiente/métodosRESUMEN
Ultraviolet light (UV) has caused tremendous damage to perovskite solar cells (PSCs), degrading the perovskite and shortening their lifetime. Defects act as non-radiative recombination sites, accelerate the degradation process, reduce the efficiency of the device and weaken the stability of solar cell. In this work, to realize efficient and stable p-i-n wide bandgap solar cells under UV, a synergetic strategy utilizing UV light-absorbing passivator, (Trifluoroacetyl) benzotriazole (TFABI), enhance UV photostability and regulate the defect passivation is proposed. By using TFABI, the degradation of the perovskite absorption layer under UV light is suppressed, spectral response is enhanced and the Pb vacancy defects are passivated. As a result, the target device achieves an efficiency of 21.54%, exhibiting excellent long-term stability under 365 nm UV irradiation. After 60 h of irradiation, it retains 85% of its initial value (60 mW cm-2 , RH 25-30%, 25 °C).
RESUMEN
Inorganic perovskite solar cells (IPSCs) have gained significant attention due to their excellent thermal stability and suitable band gap (~1.7â eV) for tandem solar cell applications. However, the defect-induced non-radiative recombination losses, low charge extraction efficiency, energy level mismatches, and so on render the fabrication of high-efficiency inverted IPSCs remains challenging. Here, the use of 3-amino-5-bromopyridine-2-formamide (ABF) in methanol was dynamically spin-coated on the surface of CsPbI2.85Br0.15 film, which facilitates the limited etching of defect-rich subsurface layer, resulting in the formation of vertical PbI2 nanosheet structures. This enabled localized contacts between the perovskite film and the electron transport layer, suppress the recombination of electron-hole and beneficial to electron extraction. Additionally, the C=O and C=N groups in ABF effectively passivated the undercoordinated Pb2+ at grain boundaries and on the surface of CsPbI2.85Br0.15 film. Eventually, we achieved a champion efficiency of 20.80 % (certified efficiency of 20.02 %) for inverted IPSCs with enhanced stability, which is the highest value ever reported to date. Furthermore, we successfully prepared p-i-n type monolithic inorganic perovskite/silicon tandem solar cells (IPSTSCs) with an efficiency of 26.26 %. This strategy provided both fast extraction and efficient passivation at the electron-selective interface.
RESUMEN
Polyethylene film mulching is a key technology for soil water retention in dryland agriculture, but the aging of the films can generate a large number of microplastics with different shapes. There exists a widespread misunderstanding that the concentrations of microplastics might be the determinant affecting the diversity and assembly of soil bacterial communities, rather than their shapes. Here, we examined the variations of soil bacteria community composition and functioning under two-year field incubation by four shapes (ball, fiber, fragment and powder) of microplastics along the concentration gradients (0.01%, 0.1% and 1%). Data showed that specific surface area of microplastics was significantly positively correlated with the variations of bacterial community abundance and diversity (r=0.505, p<0.05). The fragment- and fiber-shape microplastics displayed more pronounced interfacial continuity with soil particles and induced greater soil bacterial α-diversity, relative to the powder- and ball-shape ones. Strikingly, microplastic concentrations were not significantly correlated with bacterial community indices (r=0.079, p>0.05). Based on the variations of the ßNTI, bacterial community assembly actually followed both stochastic and deterministic processes, and microplastic shapes significantly modified soil biogeochemical cycle and ecological functions. Therefore, the shapes of microplastics, rather than the concentration, significantly affected soil bacterial community assembly, in association with microplastic-soil-water interfaces.
RESUMEN
Physical thickness of low-density polyethylene (LDPE) films might determine the release rate of phthalic acid esters (PAEs) & structural integrity and affect production efficiency. However, this critical issue is still unclear and little reported. Aging effects were evaluated in LDPE films with the thickness of 0.006, 0.008, 0.010 and 0.015 mm in a maize field of irrigation region. The Scanning electron microscope (SEM) results showed that the proportion of damaged area (Dam) to total area of LDPE films was massively lowered with increasing thickness after aging. The highest and lowest Dam was 32.2% and 3.5% in 0.006 and 0.015 mm films respectively. Also, the variations in peak intensity of asymmetric & symmetrical stretching vibrations (ASVI & SSVI) were detected using Fourier transform infrared spectrum (FTIR), indicating that the declines in peak intensity tended to be slower with thickness. Interestingly, the declines in physical integrity were tightly associated with increasing exhalation rate of PAEs. Average releasing rate of PAEs was 38.2%, 31.4%, 31.5% and 19.7% in LDPE films from 0.006 to 0.015 mm respectively. Critically, thicker film mulching can lead to greater soil water storage at plough layer (SWS-PL) and better thermal status, accordingly harvesting higher economic benefit. Therefore, LDPE film thickening may be a solution to reduce environmental risk but improve production efficiency in arid region.
Asunto(s)
Luz , Polietileno , Suelo , VibraciónRESUMEN
This study aims to address the lack of relevant researches in the field of waste recycling using the Theory of Planned Behavior (TPB). A village-scale social survey was conducted to investigate the degree of farmers' participation in a waste plastic film program, i.e. Old for New in northwest China. The program required farmers to recycle plastic film residues in exchange for new films. Survey results showed that 67.5% of farmers accepted the program, yet only 14.5% of them actually participated. Logistic regression analysis was used to analyze questionnaire data and identify the factors that significantly affected farmers' recycling behavior. Principal component and weight analysis further showed that farmers' participation was mainly influenced by their attitudes (p < 0.01), with a relative weight (RW) of 46.3%. Yet, subjective norms (p < 0.1) and perceived behavior control (p < 0.1) had less effect on the degree of participation, and their RWs were 4.2% and 4.1% only, respectively. Moreover, the RW of plastic film usage characteristics and household characteristics reached up to 13.2% and 6.4%, respectively. Interestingly, environmental awareness (ß = 0.083) and compulsory environmental education (ß = 0.130) as surface factors strongly affected the farmers' adoption and response, with the RW of 25.7%. As such, the extended TPB model was established to analyze the participation behavior of farmers for stronger explanatory power. This study highlighted a promising strategy based on TPB for waste plastic film recycling and similar environmental management practices.
Asunto(s)
Agricultores , Teoría del Comportamiento Planificado , Humanos , Agricultura , China , PlásticosRESUMEN
The polyethylene (PE) film mulching as a water conservation technology has been widely used in dryland agriculture, yet the long-term mulching has led to increasing accumulation of secondary pollutants in soils. The decomposition of PE film-sourced pollutants is directly associated with the enrichment of specific bacterial communities. We therefore hypothesized that plant biomass may act as an organic media to mediate the pollutant decomposition via reshaping bacterial communities. To validate this hypothesis, plant biomass (dried maize straw and living clover) was embedded at the underlying surface of PE film, to track the changes in the composition and function of bacterial communities in maize field across two years. The results indicated that both dry crop straw and alive clover massively promoted the α-diversity and abundance of dominant bacteria at plastisphere, relative to bulk soil. Bacterial communities tended to be clustered at plastisphere, forming the bacteria islands to enrich pollutant-degrading bacteria, such as Sphingobacterium, Arthrobacter and Paracoccus. As such, plastisphere bacteria islands substantially enhanced the degradation potential of chloroalkene and benzoate (p < 0.05). Simultaneously, bacterial network became stabilized and congregated at plastisphere, and markedly improved the abundance of plastisphere module hubs and connectors bacteria via stochastic process. Particularly, bacterial community composition and plastic film-sourced pollutants metabolism were evidently affected by soil pH, carbon and nitrogen sources that were mainly derived from the embedded biomass. To sum up, plant biomass embedding as a nature-based strategy (NbS) can positively mediate the decomposition of plastic-sourced pollutants through plastisphere bacteria island effects.
Asunto(s)
Contaminantes Ambientales , Suelo , Suelo/química , Biomasa , Polietileno , Agua/análisis , Agricultura/métodos , Plásticos , Bacterias , Microbiología del SueloRESUMEN
The rise of plasticulture as mulching material in farming systems has raised concerns about microplastics (MPs) in the agricultural landscape. MPs are emerging pollutants in croplands and water systems with significant ecological risks, particularly over the long term. In the soil systems, MPs polymer type, thinness, shape, and size induces numerous effects on soil aggregates, dissolved organic carbon (C), rapidly oxidized organic C, microbial biomass C, microbial biomass nitrogen (N), microbial immobilization, degradation of organic matter, N cycling, and production of greenhouse gas emissions (GHGs), thereby posing a significant risk of impairing soil physical and biochemical properties over time. Further, toxic chemicals released from polyethylene mulching (PMs) might indirectly harm plant growth by affecting soil wetting-drying cycles, releasing toxic substances that interact with soil matrix, and suppressing soil microbial activity. In the environment, accumulation of MPs poses a risk to human health by accelerating emissions of GHGs, e.g., methane and carbon dioxide, or directly releasing toxic substances such as phthalic acid esters (PAEs) into the soils. Also, larger sizes MPs can adhere to root surface and block stomata could significantly change the shape of root epidermal cells resulting in arrest plant growth and development by restricting water-nutrient uptake, and gene expression and altering the biodiversity of the soil pollutants. In this review, we systematically analyzed the potential risks of MPs to the soil-plant and human body, their occurrence, abundance, and migration in agroecosystems. Further, the impacts of MPs on soil microbial function, nutrient cycling, soil C, and GHGs are mechanistically reviewed, with emphasis on potential green solutions such as organic materials amendments along with future research directions for more eco-friendly and sustainable plastic management in agroecosystems.
Asunto(s)
Contaminantes Ambientales , Microplásticos , Humanos , Microplásticos/toxicidad , Plásticos , Suelo/química , Agricultura , EcosistemaRESUMEN
Polycrystalline perovskite films fabricated on flexible and textured substrates often are highly defective, leading to poor performance of perovskite devices. Finding substrate-tolerant perovskite fabrication strategies is therefore paramount. Herein, this study shows that adding a small amount of Cadmium Acetate (CdAc2 ) in the PbI2 precursor solution results in nano-hole array films and improves the diffusion of organic salts in PbI2 and promotes favorable crystal orientation and suppresses non-radiative recombination. Polycrystalline perovskite films on the flexible substrate with ultra-long carrier lifetimes exceeding 6 µs are achieved. Eventually, a power conversion efficiency (PCE) of 22.78% is obtained for single-junction flexible perovskite solar cells (FPSCs). Furthermore, it is found that the strategy is also applicable for textured tandem solar cells. A champion PCE of 29.25% (0.5003 cm2 ) is demonstrated for perovskite/silicon tandem solar cells (TSCs) with CdAc2 . Moreover, the un-encapsulated TSCs maintains 109.78% of its initial efficiency after 300 h operational at 45 °C in a nitrogen atmosphere. This study provides a facile strategy for achieving high-efficiency perovskite-based solar cells.
RESUMEN
Inorganic perovskite solar cells (IPSCs) have garnered attention in tandem solar cells (TSCs) due to their suitable bandgap and impressive thermal stability. However, the efficiency of inverted IPSCs has been limited by the high trap density on the top surface of inorganic perovskite film. Herein, a method for fabricating efficient IPSCs by reconfiguring the surface properties of CsPbI2.85 Br0.15 film with 2-amino-5-bromobenzamide (ABA) is developed. This modification not only exhibits the synergistic coordination of carbonyl (C=O) and amino (NH2 ) groups with uncoordinated Pb2+ , but also the Br fills halide vacancies and suppresses the formation of Pb0 , effectively passivating the defective top surface. As a result, a champion efficiency of 20.38%, the highest efficiency reported for inverted IPSCs to date is achieved. Furthermore, the successful fabrication of a p-i-n type monolithic inorganic perovskite/silicon TSCs with an efficiency of 25.31% for the first time is demonstrated. Crucially, the unencapsulated ABA-treated IPSCs shows enhanced photostability, retaining 80.33% of its initial efficiency after 270 h, and thermal stability (maintain 85.98% of its initial efficiency after 300 h at 65 °C). The unencapsulated ABA-treated TSCs also retains 92.59% of its initial efficiency after 200 h under continuous illumination in ambient air.
Asunto(s)
Compuestos de Calcio , Plomo , Óxidos , SilicioRESUMEN
Plastic film residuals are increasingly remaining in cultivated lands. However, it is a critical issue how residual plastic type and thickness affect soil properties and crop yield. To address this issue, in situ landfill was conducted using thick polyethylene (PEt1), thin polyethylene (PEt2), thick biodegradable (BIOt1), thin biodegradable (BIOt2) residues, and CK (control) with no residues landfill in a semiarid maize field. The findings demonstrated that the impact of various treatments on soil characteristics and maize yield varied considerably. Soil water content decreased by 24.82% in PEt1 and 25.43% in PEt2, compared to BIOt1 and BIOt2, respectively. BIOt2 treatment increased soil bulk density by 1.31 g cm-3 and lowered soil porosity by 51.11%, respectively; it also elevated the silt/clay proportion by 49.42% relative to CK. In contrast, microaggregate composition in PEt2 was higher (43.02%). Moreover, BIOt2 lowered soil nitrate (NO3-) and ammonium (NH4+) content. Compared with other treatments, BIOt2 resulted in significantly higher soil total nitrogen (STN) and lower SOC/STN. Finally, BIOt2 exhibited the lowest water use efficiency (WUE) (20.57 kg ha-1 mm-1) and yield (6896 kg ha-1) among all the treatments. Therefore, BIO film residues exhibited detrimental impacts on soil quality and maize productivity compared to PE film ones. Considering film thickness, thin residual films more evidently influenced soil quality and maize productivity than thick film ones.
Asunto(s)
Suelo , Zea mays , Suelo/química , Agricultura/métodos , Polietileno , Plásticos , Agua/análisis , Nitrógeno/análisis , ChinaRESUMEN
It is crucial to elucidate the release rate of microplastics (MPs) and phthalic acid esters (PAEs) in agricultural soil and their effects on crop productivity regarding film types and thicknesses. To address this issue, two-year landfill test was performed using 0.016 mm-thick polyethylene (PEt1) & biodegradable (BIOt1), and 0.01 mm-thin polyethylene (PEt2) & biodegradable (BIOt2) residual films as materials with no landfill as CK. Scanning electron microscopy (SEM) and infrared analyses revealed that two-year landfill caused considerable changes in physical forms and spectral peaks in BIO film, which was more pronounced in thin BIO (36.90 % weight loss). Yet, less changes were presented in the above analyzes in polyethylene (PE) films, and thick films damaged relatively less. MPs number was 86,829.11 n/kg in BIOt1 and 134,912.27 n/kg in BIOt2, equivalent to 2.55 and 3.72 times higher than in PEt1 and PEt2, respectively. This was closely associated with PAEs release, as soil PAEs concentration was substantially lower in PEt1 (17.60 g/kg) and PEt2 (21.43 g/kg) than in BIOt1 and BIOt2 (37.12 g/kg and 49.20 g/kg), respectively. Furthermore, maize productivity parameters were negatively correlated with the amount of MPs and PAEs. BIOt2 and PEt1 had the lowest and highest grain yield, respectively. BIO exhibited greater environmental risk and adverse effects on soil and crop productivity than PE film due to physical degradation and release of PAEs. Thickness-wise comparison exhibited that thin film residues had more adverse effect relative to thick film ones.
Asunto(s)
Ácidos Ftálicos , Contaminantes del Suelo , Suelo/química , Microplásticos/toxicidad , Plásticos/química , Polietileno/análisis , Contaminantes del Suelo/análisis , Ácidos Ftálicos/análisis , Ésteres/análisis , ChinaRESUMEN
Photovoltaic hydrogen production from seawater is of great significance. Challenges of solar-driven seawater electrolysis, for example, competing among chlorine evolution reactions, chloride corrosion, and catalyst poisoning, seriously restrict the development of this technology. In this paper, we report a two-dimensional nanosheet quaternary metal hydroxide catalyst composed of Ni, Fe, Cr, and Mo elements. By in situ electrochemical activation, a partial Mo element was leached and morphologically transformed in the catalyst. The higher metal valence states and many O vacancies were obtained, providing excellent catalytic activity and corrosion resistance in overall alkaline seawater electrolysis operating at an industrial-required current density of 500 mA cm-2 over 1000 h under 1.82 V low voltages at room temperature. The floating solar seawater splitting device shows a 20.61 ± 0.77% efficiency of solar energy to hydrogen (STH). This work demonstrates the development of efficient solar seawater electrolysis devices and potentially promotes research on clean energy conversion.
RESUMEN
Surface defects-mediated nonradiative recombination plays a critical role in the performance and stability of perovskite solar cells (PSCs) and surface post-treatment is widely used for efficient PSCs. However, the commonly used surface passivation strategies are one-off and the passivation defect ability is limited, which can only solve part of the defects in the topmost surface area. Here, a secondary anti-solvent strategy is proposed to further reduce surface defects based on conventional surface passivation for the first time. Based on this, the crystallization quality of 2D Dion-Jacobson perovskite is enhanced and the surface defects density is further reduced by nearly two orders. In addition, a gradient structure of perovskite with n = 2 phases located at the top of the film and 3D-like phases located at the bottom of the film can also be obtained. The modulated perovskite film boosts the efficiency of 2D perovskites (n = 5) up to 19.55%. This strategy is also very useful in other anti-solvent processed perovskite dipping systems, which paves a promising avenue for minimizing surface defects toward highly efficient perovskite devices.
RESUMEN
Thickness of low-density polyethylene (LDPE) film might determine its mechanical strength, clean production and soil health. Yet, this issue is little understood. In situ aging effects were evaluated in LDPE films with the thickness of 0.006 mm, 0.008 mm, 0.010 mm and 0.015 mm in maize field. The data showed that maximum tensile force (TFmax), maximum tensile strength (TSmax) and elongation at break (EAB) were massively lowered with increasing thickness after aging. The greatest and lowest reduction magnitude of EAB was 27.6 % and 11.2 % in 0.006 mm and 0.015 mm films respectively. Also, the melting point (Tm) and crystallinity (Xc) under Differential Scanning Calorimeter (DSC) tended to decline with the increasing thickness. Moreover, the peak intensity of crystalline regions tended to transfer and concentrate on the amorphous regions, and such tendency became more pronounced in the thin films. Interestingly, there existed a pronounced distinct thickness-dependent effects on soil bulk density (SBD) and soil water-stable aggregate proportion. Thick plastic film mulching increased SBD but reduced the proportion of macroaggregates (mainly referred to 0.015 mm and 0.010 mm). In addition, thick film mulching slightly reduced the levels of soil organic carbon (SOC) and total nitrogen (TN), but significantly promoted the contents of soil labile C and N. Particularly, it significantly promoted above- & under-ground biomass of maize across two growing seasons (p < 0.05). To sum up, thickening LDPE film may act as a promising solution to improve LDPE film residue recycling, while benefiting for higher productivity. However, thick film mulching may cause a certain adverse impact on soil structure, and further investigations would be needed in the future.
Asunto(s)
Polietileno , Zea mays , Carbono , SueloRESUMEN
Environmental risk of multi-year polythene film mulching (PM) was evaluated and investigated. The location observation following 19-year (2000-2018) PM in irrigated region indicated that the cumulative accumulation of soil microplastics was as high as 2900 ± 19.5 n kg-1. Microplastic accumulation was tightly associated with soil plasticizer concentration (Pearson's r = 0.728, p <0.05), and the concentration of dominant phthalic acid esters (PAEs) was up to 117.5-705 µg kg-1. As such, we conducted organic mulching substitute experiment (2019-2020) with non-mulching (CK), maize straw mulching (SM), living clover mulching (CM), PM, PM+SM and PM+CM respectively. The data showed that organic mulching (SM, CM) achieved similar productivity benefit as PM-involved treatments (p > 0.05). Critically, total concentration of PAEs decreased by 6.43% in SM relative to CK, and by 9.61% in PM+SM relative to PM respectively. High throughput sequencing indicated that the proportions of predominant bacteria and fungi were totally lower in PM than those of organic mulching, particularly Sphingomonadaceae and Stachybotryaceae. KEGG analyses indicated that organic mulching promoted the metabolisms of polycyclic aromatic hydrocarbons, benzoic acid (probability>75%) and heterologous organism metabolism (p<0.001), due to improved microbial community assembly. Therefore, organic mulching efficiently accelerated microbial mineralization of PM pollutants, and may act as a green solution to displace PM.
Asunto(s)
Agricultura , Plásticos , China , Polietileno/análisis , Suelo , Agua/análisis , Zea maysRESUMEN
Nickel oxide (NiOx ) is an attractive hole-transport material for efficient and stable p-i-n metal-halide perovskite solar cells (PSCs). However, an undesirable redox reaction occurs at the NiOx /perovskite interface, which results in a low open-circuit voltage (VOC ), instability, and phase separation of the NiOx -based wide-bandgap perovskite (Br > 20%). In order to simultaneously address the abovementioned phase separation problem and redox chemistry at the perovskite/NiOx interface, the bandgap is widened from 1.64 to 1.67 eV by adding inorganic CsPbCl3 -clusters (3 mol%) to the Cs22 Br15 perovskite precursor solution. Moreover, adding extra 2 mol% CsCl enriches the NiOx /perovskite interface with Cl, thereby preventing the redox reaction at the interface, while controlling the Br content to within 15% improves the photostability of the wide-bandgap perovskite. Consequently, the power conversion efficiency (PCE) of a single-junction p-i-n PSC increases from 17.82% to 19.76%, which leads to the fabrication of highly efficient monolithic p-i-n-type NiOx -based perovskite/silicon tandem solar cells with PCEs of up to 27.26% (certified PCE: 27.15%). The perovskite to an n-i-p-type perovskite/silicon tandem solar cell is also applied to deliver a VOC of 1.93 V and a final efficiency of 25.5%. These findings provide critical insight into the fabrication of highly efficient and stable wide-bandgap perovskites.
RESUMEN
Novel axially chiral ligands have been designed and synthesized by merging the chelating picolinic acid with substituted BINOLs. The in-situ-prepared copper catalysts from the ligands and CuI enable the asymmetric oxidative coupling of 2-naphthols, affording 6,6'-disubstituted BINOLs in up to 89% yield with good enantioselectivities (up to 96:4 e.r.).
RESUMEN
Automated characterization of spatial data is a kind of critical geographical intelligence. As an emerging technique for characterization, spatial Representation Learning (SRL) uses deep neural networks (DNNs) to learn non-linear embedded features of spatial data for characterization. However, SRL extracts features by internal layers of DNNs, and thus suffers from lacking semantic labels. Texts of spatial entities, on the other hand, provide semantic understanding of latent feature labels, but is insensible to deep SRL models. How can we teach a SRL model to discover appropriate topic labels in texts and pair learned features with the labels? This paper formulates a new problem: feature-topic pairing, and proposes a novel Particle Swarm Optimization (PSO) based deep learning framework. Specifically, we formulate the feature-topic pairing problem into an automated alignment task between 1) a latent embedding feature space and 2) a textual semantic topic space. We decompose the alignment of the two spaces into: 1) point-wise alignment, denoting the correlation between a topic distribution and an embedding vector; 2) pair-wise alignment, denoting the consistency between a feature-feature similarity matrix and a topic-topic similarity matrix. We design a PSO based solver to simultaneously select an optimal set of topics and learn corresponding features based on the selected topics. We develop a closed loop algorithm to iterate between 1) minimizing losses of representation reconstruction and feature-topic alignment and 2) searching the best topics. Finally, we present extensive experiments to demonstrate the enhanced performance of our method.
RESUMEN
Biodegradable (Bio) plastic films are widely viewed as promising alternative products of low-density polyethylene (LDPE) films to minimize plastic debris accumulation and pollution in agroecosystems. Yet, this speculation indeed lacks of sufficient evidences. We conducted a landfill investigation on the aging characteristics of Bio and LDPE plastic films in maize field, and the effects on soil aggregate composition and carbon & nitrogen stocks. The degradation rate of Bio film was up to 41.1% while that of LDPE film was zero. Scanning electron microscope (SEM) showed that the crack formation of Bio film had a pronounced domino effect, and FTIR showed that old Bio film displayed an extra wide peak threshold ranging from 3000 to 3500 cm-1. Particularly, the abundance of microplastics was elevated with the increased plastic residues, and the increment mostly resulted from Bio residues. Critically, plastic residues significantly lowered the soil macro-aggregates (>0.25 mm) proportion, while increasing that of micro-aggregates (0.1-0.25 mm) in LDPE, and silt/clay fraction (<0.1 mm) in Bio respectively. They significantly promoted total nitrogen content of the aggregates with the same size, but decreased the organic carbon content, dramatically lowering the C/N. Therefore, we first identified the fate of plastic film residues in agroecosystems and revealed the serious deficiencies of Bio plastic film.