Novel machine-learning prediction tools for overall survival of patients with chondrosarcoma: Based on recursive partitioning analysis.

BACKGROUND: Chondrosarcoma (CHS), a bone malignancy, poses a significant challenge due to its heterogeneous nature and resistance to conventional treatments. There is a clear need for advanced prognostic instruments that can integrate multiple prognostic factors to deliver personalized survival predictions for individual patients. This study aimed to develop a novel prediction tool based on recursive partitioning analysis (RPA) to improve the estimation of overall survival for patients with CHS. METHODS: Data from the Surveillance, Epidemiology, and End Results (SEER) database were analyzed, including demographic, clinical, and treatment details of patients diagnosed between 2000 and 2018. Using C5.0 algorithm, decision trees were created to predict survival probabilities at 12, 24, 60, and 120 months. The performance of the models was assessed through confusion scatter plot, accuracy rate, receiver operator characteristic (ROC) curve, and area under ROC curve (AUC). RESULTS: The study identified tumor histology, surgery, age, visceral (brain/liver/lung) metastasis, chemotherapy, tumor grade, and sex as critical predictors. Decision trees revealed distinct patterns for survival prediction at each time point. The models showed high accuracy (82.40%-89.09% in training group, and 82.16%-88.74% in test group) and discriminatory power (AUC: 0.806-0.894 in training group, and 0.808-0.882 in test group) in both training and testing datasets. An interactive web-based shiny APP (URL: https://yangxg1209.shinyapps.io/chondrosarcoma_survival_prediction/) was developed, simplifying the survival prediction process for clinicians. CONCLUSIONS: This study successfully employed RPA to develop a user-friendly tool for personalized survival predictions in CHS. The decision tree models demonstrated robust predictive capabilities, with the interactive application facilitating clinical decision-making. Future prospective studies are recommended to validate these findings and further refine the predictive model.

Research progress and challenges of stem cell therapy for ischemic stroke.

Ischemic stroke is a significant global cause of death and disability. Currently, treatment options for acute ischemic stroke are limited to intravenous thrombolysis and mechanical recanalization. Therefore, novel neuroprotective strategies are imperative. Stem cell transplantation possesses the capabilities of differentiation, proliferation, neuronal replacement, nerve pathway reconstruction, secretion of nerve growth factors, and enhancement of the microenvironment; thus, it is a potential therapeutic approach for ischemic stroke. In addition, the immunomodulatory function of stem cells and the combined treatment of stem cells and exosomes exhibit a favorable protective effect on brain injury and neurological dysfunction following stroke. Meanwhile, the theory of microbiota-gut-brain axis provides us with a novel perspective for comprehending and managing neurological diseases. Lastly, stem cell transplantation has demonstrated promising outcomes not only in treating ischemic stroke but also in dealing with other neurological disorders, such as brain tumors. Furthermore, challenges related to the tissue source, delivery method, immune response, and timing of transplantation still need to be addressed to optimize the treatment.

Economical one-pot synthesis of isoquercetin and D-allulose from quercetin and sucrose using whole-cell biocatalyst.

Isoquercetin and D-allulose have diverse applications and significant value in antioxidant, antibacterial, antiviral, and lipid metabolism. Isoquercetin can be synthesized from quercetin, while D-allulose is converted from D-fructose. However, their production scale and overall quality are relatively low, leading to high production costs. In this study, we have devised a cost-effective one-pot method for biosynthesizing isoquercetin and D-allulose using a whole-cell biocatalyst derived from quercetin and sucrose. To achieve this, the optimized isoquercetin synthase and D-allulose-3-epimerase were initially identified through isofunctional gene screening. In order to reduce the cost of uridine diphosphate glucose (UDPG) during isoquercetin synthesis and ensure a continuous supply of UDPG, sucrose synthase is introduced to enable the self-circulation of UDPG. At the same time, the inclusion of sucrose permease was utilized to successfully facilitate the catalytic production of D-allulose in whole cells. Finally, the recombinant strain BL21/UGT-SUS+DAE-SUP, which overexpresses MiF3GTMUT, GmSUS, EcSUP, and DAEase, was obtained. This strain co-produced 41±2.4 mg/L of isoquercetin and 5.7±0.8 g/L of D-allulose using 120 mg/L of quercetin and 20 g/L of sucrose as substrates for 5 h after optimization. This is the first green synthesis method that can simultaneously produce flavonoid compounds and rare sugars. These findings provide valuable insights and potential for future industrial production, as well as practical applications in factories.

Three-dimensional spine reconstruction from biplane radiographs using convolutional neural networks.

PURPOSE: The purpose of this study was to develop and evaluate a deep learning network for three-dimensional reconstruction of the spine from biplanar radiographs. METHODS: The proposed approach focused on extracting similar features and multiscale features of bone tissue in biplanar radiographs. Bone tissue features were reconstructed for feature representation across dimensions to generate three-dimensional volumes. The number of feature mappings was gradually reduced in the reconstruction to transform the high-dimensional features into the three-dimensional image domain. We produced and made eight public datasets to train and test the proposed network. Two evaluation metrics were proposed and combined with four classical evaluation metrics to measure the performance of the method. RESULTS: In comparative experiments, the reconstruction results of this method achieved a Hausdorff distance of 1.85 mm, a surface overlap of 0.2 mm, a volume overlap of 0.9664, and an offset distance of only 0.21 mm from the vertebral body centroid. The results of this study indicate that the proposed method is reliable.

Transparent multifunctional cellulose-based conductive hydrogel for wearable strain sensors and arrays.

Conductive hydrogels as promising candidate materials for flexible strain sensors have gained considerable attentions. However, it is still a great challenge to construct hydrogel with multifunctional performance via natural polymer. Herein, a novel multifunctional conductive hydrogel based on methylcellulose and cellulose nanocrystal was prepared via a facile and low-cost strategy. Methylcellulose (MC) was introduced to not only guarantee the stability of tannic acid coated cellulose nanocrystal (TA@CNCs) in LiCl solution, but also improve anti-freezing ability. The obtained hydrogel exhibited high transparency (98 % at 800 nm), good stretchability (663.1 %), low temperature tolerance (-23.9 °C), superior conductivity (2.89 S/m) and excellent UV shielding behavior. Flexible strain sensor assembled by the prepared hydrogels can be used to detect human body motions include subtle and large motions, and exhibited good sensitivity and stability over a wide temperature range. Multiple flexible hydrogels can also be assembled into a 3D sensor array to detect the distribution and magnitude of spatial pressure. Therefore, the hydrogels prepared via natural polymers will have broad application prospects in wearable devices, electronic skin and multifunctional sensor components.

Advances in the research on myokine-driven regulation of bone metabolism.

The traditional view posits that bones and muscles interact primarily through mechanical coupling. However, recent studies have revealed that myokines, proteins secreted by skeletal muscle cells, play a crucial role in the regulation of bone metabolism. Myokines are widely involved in bone metabolism, influencing bone resorption and formation by interacting with factors related to bone cell secretion or influencing bone metabolic pathways. Here, we review the research progress on the myokine regulation of bone metabolism, discuss the mechanism of myokine regulation of bone metabolism, explore the pathophysiological relationship between sarcopenia and osteoporosis, and provide future perspectives on myokine research, with the aim of identify potential specific diagnostic markers and therapeutic entry points.

Digital anatomical study and clinical application of the ideal S2 alar-lliac screw trajectory.

BACKGROUND: To investigate the ideal trajectory for the S2AI screw and to clinically validate its safety feasibility. METHODS: The 3D model was reconstructed from CT data of the pelvis of 30 selected adults, and the 3D coordinate system was established with the first sacral superior endplate as the horizontal plane. A set of cutting planes was made at 3 mm intervals in the coronal plane, and the cross-sectional internal tangent circles were divided in the target area. Using the linear fitting function, the axis of 90 mm length was calculated by the least squares method for each inner tangent circle center. The diameter of the axis is gradually increased until the first contact with the cortex, and the cylindrical model is the ideal screw trajectory. The intersection of the axis and the dorsal cortex is the screw placement point, which is located by Horizon Distance (HD) and Vertical Distance (VD); the diameter of the screw trajectory (d) is the diameter of the cylindrical model; the direction of the screw trajectory is determined by Sagittal Angle (SA) and Transverse Angle (TA). The screw trajectory orientation is determined by Sagittal Angle (SA) and Transverse Angle (TA). Based on the ideal screw trajectory, the 3D printed surgical guide and freehand techniques were used to verify its safety feasibility, respectively. RESULTS: The screw placement points [HD (4.7 ± 1.0) mm, VD (19.7 ± 1.9) mm], screw placement directions [SA (31.3°±2.3°), TA (42.4°±2.3°)], and screw dimensions for the ideal screw trajectory of the S2AI were combined for analysis. (L is 90 mm, d is 13.2 ± 1.4 mm). The S2AI screw superiority rate [96.6% (56/58)] and reasonable rate [100%] were higher in the guide group than in the freehand group [90.0% (63/70), 97.1% (68/70)], but the differences were not statistically significant (P > 0.05). Although screws invaded the cortex in both groups, there were no associated adverse events in either group. CONCLUSION: The S2AI screw-based ideal trajectory placement is a safe, feasible and accurate method of screw placement.

Causal Genetic Loci for a Motivated Behavior Spectrum Harbor Psychiatric Risk Genes.

Behavioral diversity is critical for population fitness. Individual differences in risk-taking are observed across species, but underlying genetic mechanisms and conservation are largely unknown. We examined dark avoidance in larval zebrafish, a motivated behavior reflecting an approach-avoidance conflict. Brain-wide calcium imaging revealed significant neural activity differences between approach-inclined versus avoidance-inclined individuals. We used a population of ∼6,000 to perform the first genome-wide association study (GWAS) in zebrafish, which identified 34 genomic regions harboring many genes that are involved in synaptic transmission and human psychiatric diseases. We used CRISPR to study several causal genes: serotonin receptor-1b ( htr1b ), nitric oxide synthase-1 ( nos1 ), and stress-induced phosphoprotein-1 ( stip1 ). We further identified 52 conserved elements containing 66 GWAS significant variants. One encoded an exonic regulatory element that influenced tissue-specific nos1 expression. Together, these findings reveal new genetic loci and establish a powerful, scalable animal system to probe mechanisms underlying motivation, a critical dimension of psychiatric diseases.

Surface modification of chitin nanofibers with dopamine as efficient nanosorbents for enhanced removal of dye pollution and metal ions.

The development of environmentally friendly and low-cost adsorbents with high adsorption capacity remains a challenge. Herein, chitin nanofiber-polydopamine composite materials (CNDA) have been obtained by surface modification of chitin nanofiber using dopamine. According to the results of transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier Transform Infrared Spectrometer (FTIR), and X-ray photoelectron spectrometer (XPS), polydopamine have been successfully coated on the surface of chitin nanofiber (ChNF). The ability to remove methylene blue (MB) has been analyzed via standard adsorption experiments, indicating that the maximum adsorption capacity (qmax) can reach 196.6 mg/g at MB initial concentration of 50 mg/L. Most importantly, the adsorption kinetics, isotherm, and thermodynamics were used to investigate the MB adsorption mechanism on composites. This indicated that the polydopamine on the surface of chitin nanofiber (ChNF) plays an important role in the MB dye adsorption. Moreover, the removal ability of CNDA to metal ions has also been investigated, indicating high capacities for Fe3+, Mn2+, Cu2+, and Ni2+. Based on their biodegradability and good adsorption capacity, the CNDA composite material can be considered a promising adsorbent for wastewater treatment.

Downregulation of FTO in the hippocampus is associated with mental disorders induced by fear stress during pregnancy.

Mental disorders (MD), such as anxiety, depression, and cognitive impairment, are very common during pregnancy and predispose to adverse pregnancy outcomes; however, the underlying mechanisms are still under intense investigation. Although the most common RNA modification in epigenetics, N6-methyladenosine (m6A) has been widely studied, its role in MD has not been investigated. Here, we observed that fat mass and obesity-associated protein (FTO) are downregulated in the hippocampus of pregnant rats with MD induced by fear stress and demonstrated that FTO participates in and regulates MD induced by fear stress. In addition, we identified four genes with anomalous modifications and expression (double aberrant genes) that were directly regulated by FTO, namely Angpt2, Fgf10, Rpl21, and Adcy7. Furthermore, we found that these genes might induce MD by regulating the PI3K/Akt and Rap1 signaling pathways. It appears that FTO-mediated m6A modification is a key regulatory mechanism in MD caused by fear stress during pregnancy.

Highly stretchable, tough and conductive chitin nanofiber composite hydrogel as a wearable sensor.

To meet the requirements of eco-friendly and sustainability in the 21st century, hydrogels based on biopolymer with conductivity and stretchable property have attained increasing attention for strain sensor. However, the as-prepared of hydrogel sensor with excellent mechanical property and high strain sensitivity is still a challenge. In this study, chitin nanofiber (ChNF) reinforced composite hydrogels of PACF are fabricated via a facile one-pot method. The obtained PACF composite hydrogel exhibits good transparency (80.6 % at 800 nm)and excellent mechanical properties (tensile strength, 261.2 kPa; tensile strain as high as 550.3 %). Moreover, the composite hydrogels also demonstrate excellent anti-compression performance. The composite hydrogels own good conductivity (1.20 S/m) and strain sensitivity. Most importantly, the hydrogel can be assembled as a strain/pressure sensor for detecting large-scale and small-scale human motion. Therefore, flexible conductive hydrogel strain sensors will have broad application prospects in artificial intelligence, electronic skin, and personal health.

Chitosan-based transparent and conductive hydrogel with highly stretchable, adhesive and self-healing as skin-like sensor.

Hydrogel sensors attained increasing attention due to their excellent mechanical and sensing properties. However, it is still a big challenge to fabricate hydrogel sensors with multifunctional properties of transparent, high stretchability, self-adhesive and self-healing ability. In this study, chitosan as a natural polymer has been employed to construct a polyacrylamide-chitosan-Al3+ (PAM-CS-Al3+) double network (DN) hydrogel with high transparency (>90 % at 800 nm), good electrical conductivity (up to 5.01 S/m) and excellent mechanical properties (strain and toughness as high as 1040 % and 730 kJ/m3). Moreover, the dynamic ionic and hydrogen bond interaction between PAM and CS endowed the PAM-CS-Al3+ hydrogel good self-healing ability. In addition, the hydrogel possesses good self-adhesive ability on different substrates, including glass, wood, metal, plastic, paper, polytetrafluoroethylene (PTFE) and rubber. Most importantly, the prepared hydrogel could be assembled into transparent, flexible, self-adhesive, self-healing and high sensitive strain/pressure sensor for monitoring human body movement. This work may pave the way for fabricating the multifunctional chitosan-based hydrogels which has potential application in the fields of wearable sensor and soft electronic devices.

[Effects of umbilical moxibustion on phobic behavior and monoamine neurotransmitters in stress-model rats].

OBJECTIVE: To investigate the effects of umbilical moxibustion therapy on phobic behavior and the contents of norepinephrine (NE), dopamine (DA) and 5-hydroxytryptamine (5-HT) in different brain regions of the stress-model rats and explore the potential mechanism of umbilical moxibustion on phobic behavior. METHODS: Among 50 Wistar male rats, 45 rates were selected and randomly divided into a control group, a model group and an umbilical moxibustion group, 15 rats in each one; and the rest 5 rats were used for preparing the model of electric shock. The bystander electroshock method was adopted to prepare phobic stress model in the model group and the umbilical moxibustion group. After modeling, the intervention with umbilical moxibustion started in the umbilical moxibustion group, in which, the ginger-isolated moxibustion was applied at "Shenque" (CV 8), once daily, 2 cones for 20 min each time, for consecutively 21 days. After modeling and intervention completed, the rats in each group were subjected to the open field test to evaluate the state of fear. After intervention, the Morris water maze test and fear conditioning test were performed to evaluate the changes in learning and memory ability and the state of fear. Using high performance liquid chromatography (HPLC), the contents of NE, DA and 5-HT in the hippocampus, prefrontal cortex and hypothalamus were determined. RESULTS: Compared with the control group, the horizontal and vertical activity scores were lower (P<0.01), the number of stool particles was increased (P<0.01), the escape latency was prolonged (P<0.01), the times of target quadrant were reduced (P<0.01), and the freezing time was prolonged (P<0.05) in the rats of the model group. The horizontal and vertical activity scores were increased (P<0.05), the number of stool particles was reduced (P<0.05), the escape latency was shortened (P<0.05, P<0.01), the times of target quadrant were increased (P<0.05), and the freezing time was shortened (P<0.05) in the rats of the umbilical moxibustion group when compared with the model group. The trend search strategy was adopted in the control group and the umbilical moxibustion group, while the random search strategy was used in rats of the model group. Compared with the control group, the contents of NE, DA and 5-HT in the hippocampus, prefrontal cortex and hypothalamus were reduced (P<0.01) in the model group. In the umbilical moxibustion group, the contents of NE, DA and 5-HT in the hippocampus, prefrontal cortex and hypothalamus were increased (P<0.05, P<0.01) when compared with the model group. CONCLUSION: Umbilical moxibustion can effectively relieve the state of fear and learning and memory impairment of phobic stress model rats, which may be related to the up-regulation of contents of brain neurotransmitters, i.e. NE, DA, and 5-HT.

Promotion of the genipin crosslinked chitosan-fiber hydrogel loaded with sustained release of clemastine fumarate in diabetic wound repair.

Diabetic skin disorders are lingering and refractory clinical diseases. In this study, a genipin-crosslinked porous chitosan fiber (CSF) hydrogel was fabricated to achieve rapid wound healing. By embedding clemastine fumarate (CF) in the CSF hydrogel pores, we synthesised a CSF/CF hydrogel for the treatment of diabetic wounds. The microstructure, chemical elements, spectral variation, mechanical properties, swelling ratios, degradability, and toxicity of the CSF/CF hydrogels were studied. Compared with the typical CS power hydrogel, the porous CSF hydrogel crosslinked with genipin possesses a stable structure and improved physicochemical properties. Moreover, CF was slowly released from the CSF hydrogel. Molecular simulation also showed that CF was evenly embedded inside the cavity formed by the novel CSF hydrogel. The results suggested that CF can resist damage from high glucose levels and promote proliferation, tube formation, and migration of endothelial cells (ECs) and fibroblasts. The CSF/CF hydrogel promoted wound healing in a rat model. Mechanistically, the beneficial effect of CF on wound healing may be related to activation of the MEK/ERK and PI3K/Akt signalling pathways. In conclusion, genipin-crosslinked CSF/CF hydrogel can accelerate wound healing and may be an effective therapeutic method for treating diabetic skin lesions.

A prospective cohort study: platelet-rich plasma combined with carpal tunnel release treating carpal tunnel syndrome.

BACKGROUND: PRP injection was proved to promote the health condition of individuals with mild to moderate Carpal Tunnel Syndrome (CTS). However, carpal tunnel release (CTR) was still a necessary treatment for individuals with moderate and severe CTS. METHODS: To explore whether adjuvant PRP treatment would improve the prognosis while using CTR, we included 82 patients in this study. Preoperative and postoperative visual analog scale (VAS), Boston carpal tunnel syndrome questionnaire-symptom severity scale (BCTQ-SSS), Boston carpal tunnel syndrome questionnaire-functional status scale (BCTQ-FSS), and grip strength were used to examine the patient's symptoms and function. RESULTS: CTR combined with PRP treatment improved the VAS (1.9 ± 0.5 versus 1.4 ± 0.4, P < .05), BCTQ-SSS (1.8 ± 0.4versus 1.5 ± 0.3, P < .05) and BCTQ-FSS (1.8 ± 0.5 versus 1.4 ± 0.6, P < .05) in patients with moderate symptoms within one month after surgery. At the same time, it does not show any advantages in treating individuals with severe carpal tunnel syndrome. CONCLUSIONS: PRP does not affect long-term prognosis while increasing the surgery cost. To conclude, PRP as an adjuvant treatment of CTR has limited effect. Considering the additional financial burden on patients, CTR combined with PRP should be cautious in CTS treatment.

Fear Stress During Pregnancy Affects Placental m6A-Modifying Enzyme Expression and Epigenetic Modification Levels.

As the hub connecting mother and offspring, the placenta's normal development is vital for fetal growth. Fear stress can cause some structural alterations in the placenta and affect placental development and function. N6-methyladenosine (m6A) is the most common mRNA modification and is involved in regulating the development of the placenta and embryo. There are no reports on the potential role of m6A modification in placental damage caused by fear stress during pregnancy. In this study, we demonstrated that fear stress during pregnancy increases the levels of methylated enzymes (METTL3, METTL14, and WTAP), decreases the levels of demethylase FTO, and increases the overall methylation levels in the placenta of pregnant rats. MeRIP-seq data analysis revealed 22,010 m6A peaks associated with 12,219 genes in the placenta of the model and 21,060 m6A peaks associated with 11,730 genes in the placenta of the control. The peaks were mainly concentrated in the coding region and the 3' untranslated region. In addition, 50 genes with abnormal modification and expression (double aberrant genes) were screened out by combining MeRIP-seq and RNA-seq data. Mefv, Erbb2, and Cgas were selected from 50 double aberrant genes, and MeRIP-qPCR and real-time quantitative polymerase chain reaction were used to verify their modification and expression levels. Our findings suggest that m6A modifications play an important role in placental dysfunction induced by fear stress during pregnancy.

Neuropilin-1-Mediated SARS-CoV-2 Infection in Bone Marrow-Derived Macrophages Inhibits Osteoclast Differentiation.

In humans, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection can cause medical complications across various tissues and organs. Despite the advances to understanding the pathogenesis of SARS-CoV-2, its tissue tropism and interactions with host cells have not been fully understood. Existing clinical data have revealed disordered calcium and phosphorus metabolism in Coronavirus Disease 2019 (COVID-19) patients, suggesting possible infection or damage in the human skeleton system by SARS-CoV-2. Herein, SARS-CoV-2 infection in mouse models with wild-type and beta strain (B.1.351) viruses is investigated, and it is found that bone marrow-derived macrophages (BMMs) can be efficiently infected in vivo. Single-cell RNA sequencing (scRNA-Seq) analyses of infected BMMs identify distinct clusters of susceptible macrophages, including those related to osteoblast differentiation. Interestingly, SARS-CoV-2 entry on BMMs is dependent on the expression of neuropilin-1 (NRP1) rather than the widely recognized receptor angiotensin-converting enzyme 2 (ACE2). The loss of NRP1 expression during BMM-to-osteoclast differentiation or NRP1 neutralization and knockdown can significantly inhibit SARS-CoV-2 infection in BMMs. Importantly, it is found that authentic SARS-CoV-2 infection impedes BMM-to-osteoclast differentiation. Collectively, this study provides evidence for NRP1-mediated SARS-CoV-2 infection in BMMs and establishes a potential link between disturbed osteoclast differentiation and disordered skeleton metabolism in COVID-19 patients.

Serum Amyloid A Correlates With the Osteonecrosis of Femoral Head by Affecting Bone Metabolism.

Osteonecrosis of femoral head (ONFH) is a progressive hip joint disease without disease-modifying treatment. Lacking understanding of the pathophysiological process of ONFH has become the humper to develop therapeutic approach. Serum amyloid A (SAA) is an acute phase lipophilic protein during inflammation and we found that SAA is increased for the first time in the serum of ONFH patients through proteomic studies and quantitatively verified by ELISA. Treating rBMSCs with SAA inhibited the osteogenic differentiation via Wnt/ß-catenin signaling pathway deactivation and enhanced the adipogenic differentiation via MAPK/PPARγ signaling pathway activation. Finally, bilateral critical-sized calvarial-defect rat model which received SAA treated rBMSCs demonstrated reduction of bone formation when compared to untreated rBMSCs implantation control. Hence, SAA is a vital protein in the physiological process of ONFH and can act as a potential therapeutic target to treat ONFH.

In-Situ Reaction Method to Synthetize Constant Solid-State Composites as Phase Change Materials for Thermal Energy Storage.

The encapsulation and heat conduction of molten salt are very important for its application in heat storage systems. The general practice is to solidify molten salt with ceramic substrate and enhance heat conduction with carbon materials, but the cycle stability is not ideal. For this reason, it is of practical significance to study heat storage materials with a carbon-free thermal conductive adsorption framework. In this paper, the in-situ reaction method was employed to synthetize the constant solid-state composites for high-temperature thermal energy storage. AlN is hydrolyzed and calcined to form h-Al2O3 with a mesoporous structure to prevent the leakage of molten eutectic salt at high temperature. Its excellent thermal conductivity simultaneously improves the thermal conductivity of the composites. It is found that 15CPCMs prepared with 15% water addition have the best thermal conductivity (4.928 W/m·K) and mechanical strength (30.2 MPa). The enthalpy and the thermal storage density of 15CPCMs are 201.4 J/g and 1113.6 J/g, respectively. Due to the excellent leak-proof ability and lack of carbon materials, the 15CPCMs can maintain almost no mass loss after 50 cycles. These results indicate that 15CPCMs have promising prospects in thermal storage applications.

Erratum: Inhibition of PERK Signaling Prevents Against Glucocorticoid-induced Endotheliocyte Apoptosis and Osteonecrosis of the Femoral Head: Erratum.

[This corrects the article DOI: 10.7150/ijbs.35256.].