Ag-modified enhance the performances of ZnO@CFs based omnidirectional photoelectrochemical ultraviolet detectors.

There are several prospective applications for omnidirectional ultraviolet (UV) detectors and underwater detection detectors in optical systems and optical fields. In this work, ZnO nanorods arrays were grown on carbon fibers (CFs). An appropriate amount of Ag nanoparticles (NPs) was deposited on the surface of ZnO nanorods by photochemical deposition. This improved the performance of photoelectrochemical (PEC) based UV detectors. Under 365 nm and 10 mW cm-2 UV irradiation, the photocurrent density of the 30s-Ag/ZnO@CFs based PEC UV detector can reach 1.28 mA cm-2, which is about 7 times that of the ZnO@CFs based PEC UV detector, and the rising time is shortened from 0.17 s to 0.10 s. The reason is that increased absorption of ultraviolet light induced by the localized surface plasmon resonance. In addition, the detector exhibits a good flexibility and remains flexible after hundreds of bends and twists. Moreover, the detector is responsive in the range of rotation angle from 0 to 360°. It provides an insight to improve the photoelectric performance and underwater omnidirectional detection ability of the PEC UV detector.

Sustainable Recycling of Selenium-Based Optoelectronic Devices.

Selenium (Se), the world's oldest optoelectronic material, has been widely applied in various optoelectronic devices such as commercial X-ray flat-panel detectors and photovoltaics. However, despite the rare and widely-dispersed nature of Se element, a sustainable recycling of Se and other valuable materials from spent Se-based devices has not been developed so far. Here a sustainable strategy is reported that makes use of the significantly higher vapor pressure of volatile Se compared to other functional layers to recycle all of them from end-of-life Se-based devices through a closed-space evaporation process, utilizing Se photovoltaic devices as a case study. This strategy results in high recycling yields of ≈ 98% for Se and 100% for other functional materials including valuable gold electrodes and glass/FTO/TiO2 substrates. The refabricated photovoltaic devices based on these recycled materials achieve an efficiency of 12.33% under 1000-lux indoor illumination, comparable to devices fabricated using commercially sourced materials and surpassing the current indoor photovoltaic industry standard of amorphous silicon cells.

A fully digital workflow to design anterior guidance for an implant-supported single crown using a modified patient-specific motion technique.

Current methods for designing anterior guidance of anterior fixed prostheses are either complicated or lack accuracy. The article describes a fully digital workflow to design individualized anterior guidance of an implant-supported single crown by using a modified patient-specific motion technique. The technique aims to optimize the digital occlusal design workflow, thereby improving the occlusal fit and long-term stability of anterior fixed prostheses.

Live Cell Imaging and Real-Time Monitoring of Nucleolus Morphology and Mitophagy with a Red Fluorescent and Photostable rRNA-Specific Probe in Human Cancer Cells.

rRNAs are prevalent in living organisms. They are produced in nucleolus and mitochondria and play essential cellular functions. In addition to the primary biofunction in protein synthesis, rRNAs have been recognized as the emerging signaling molecule and drug target for studies on nucleolus morphology, mitochondrial autophagy, and tumor cell malignancy. Currently, only a few rRNA-selective probes have been developed, and most of them encounter the drawbacks of low water solubility, poor nuclear membrane permeability, short emission wavelength, low stability against photobleaching, and high cytotoxicity. These unfavorable properties of rRNA probes limit their potential applications. In the present study, we reported a new rRNA-selective and near-infrared fluorescent turn-on probe, 4MPS-TO, capable of tracking rRNA in live human cancer cells. The real-time monitoring performance in nucleolus morphology and mitochondrial autophagy is demonstrated in HeLa cells. The probe shows great application potential for being used as a rRNA-selective, sensitive, and photostable imaging tool in chemical biology study and drug screening.

[Trueness of different digital design methods for incisal guidance of maxillary anterior implant-supported single crowns].

OBJECTIVE: To compare the trueness of incisal guidance of implant-supported single crowns designed by patient-specific motion (PSM) with that designed by average-value virtual articulator (AVA). METHODS: The study had recruited 12 participants with complete dentition and stable incisal guidance. An intraoral scanner was used to scan digital casts and record two types of patient-specific motion (data only including protrusive movement, and data including protrusive movement and lateral protrusive movement). The lingual surfaces of the maxillary incisors which guided the protrusive movement was selected and elevated to create a reference cast. A maxillary central incisor of original casts was vir-tually extracted and implanted to generate a working cast. The Dental system software program was used to design implant-supported single crowns with the anatomical coping design method. The incisal guidance was designed by different methods. The incisal guidance in control group was designed by the average-value virtual articulator. The incisal guidance in experiment groups was designed by the patient-specific motion only including protrusive movement (PSM1) and with the patient-specific motion including protrusive movement and lateral protrusive movement (PSM2). The incisal guidance of prosthesis designed by these 3 methods were compared with the original incisal guidance in Geomagic Control 2015 (3DSystem, America). The measurements included: Average of positive values, ratio of positive area and maximum value reflecting supra-occlusion; average of negative values, ratio of negative area and minimum value reflecting over-correction; and root mean square reflecting overall deviation. RESULTS: Statistical data were collected using the median (interquartile range) method. The average of positive values, ratio of positive area and average of negative values of the PSM2 group were smaller than those of the control group [8.0 (18.8) µm vs. 37.5 (47.5) µm; 0 vs. 7.2% (38.1%); -109.0 (63.8) µm vs.-66.5 (64.5) µm], and the ratio of negative area of PSM2 group was larger than those of the control group [52.9% (47.8%) vs. 17.3% (45.3%)], with significant differences (P all < 0.05). The ratio of positive area [0.1% (7.0%)] and average of negative values [-97.0 (61.5) µm] of PSM1 group, were smaller than those of the control group, and the ratio of negative area [40.7% (39.2%)] of the PSM1 group was larger than that of the control group, with significant differences (P < 0.05). The average of positive values [20.0 (42.0) µm] and ratio of positive area of PSM1 group was larger than that of the PSM2 group with significant differences (P < 0.05). CONCLUSION: To establish the incisor guidance of implant-supported single crowns, compared with the average-value virtual articulator and the patient-specific motion only including protrusive movement, the patient-specific motion including protrusive movement and lateral protrusive movement is more conducive to reducing the protrusive interference of prosthesis and improving the occlusal fit.

RNA-binding protein IGF2BP2 suppresses metastasis of clear cell renal cell carcinoma by enhancing CKB mRNA stability and expression.

Clear cell renal cell carcinoma (ccRCC) is the most prevalent kidney cancer, with a highly aggressive phenotype and poor prognosis. RNA binding proteins (RBPs) play crucial roles in post-transcriptional gene regulation and have been implicated in tumorigenesis. RBPs have the potential to become a new therapeutic target for ccRCC. In this study, we screened and validated that insulin-like growth factor 2 mRNA binding protein 2 (IGF2BP2) as an RBP, was down-regulated in ccRCC tissues and cell lines. Functionally, we verified that IGF2BP2 significantly suppressed the migration and invasion ability of ccRCC in vitro and in vivo. Mechanistically, RIP-seq and actinomycin D experiments results showed that IGF2BP2 enhanced the expression of Creatine Kinase B (CKB) by binding to CKB mRNA and enhancing its mRNA stability. Thus, IGF2BP2 inhibited ccRCC metastasis through enhancing the expression of CKB. Taken together, these finding suggests that IGF2BP2 is a novel metastasis suppressor of ccRCC and may serve as a potential therapeutic target.

The transmembrane and cytosolic domains of equine herpesvirus type 1 glycoprotein D determine Golgi retention by regulating vesicle formation.

Accumulating evidence underscores the pivotal role of envelope proteins in viral secondary envelopment. However, the intricate molecular mechanisms governing this phenomenon remain elusive. To shed light on these mechanisms, we investigated a Golgi-retained gD of EHV-1 (gDEHV-1), distinguishing it from its counterparts in Herpes Simplex Virus-1 (HSV-1) and Pseudorabies Virus (PRV). To unravel the specific sequences responsible for the Golgi retention phenotype, we employed a gene truncation and replacement strategy. The results suggested that Golgi retention signals in gDEHV-1 exhibiting a multi-domain character. The extracellular domain of gDEHV-1 was identified as an endoplasmic reticulum (ER)-resident domain, the transmembrane domain and cytoplasmic tail (TM-CT) of gDEHV-1 were integral in facilitating the protein's residence within the Golgi complex. Deletion or replacement of either of these dual domains consistently resulted in the mutant gDEHV-1 being retained in an ER-like structure. Moreover, (TM-CT)EHV-1 demonstrated a preference for binding to endomembranes, inducing the generation of a substantial number of vesicles, potentially originate from the Golgi complex or the ER-Golgi intermediate compartment. In conclusion, our findings provide insights into the intricate molecular mechanisms governing the Golgi retention of gDEHV-1, facilitating the comprehension of the processes underlying viral secondary envelopment.

RNA Binding Protein PTBP1 Promotes the Metastasis of Gastric Cancer by Stabilizing PGK1 mRNA.

Gastric cancer (GC) is the most common type of malignant tumor within the gastrointestinal tract, and GC metastasis is associated with poor prognosis. Polypyrimidine tract binding protein 1 (PTBP1) is an RNA-binding protein implicated in various types of tumor development and metastasis. However, the role of PTBP1 in GC metastasis remains elusive. In this study, we verified that PTBP1 was upregulated in GC tissues and cell lines, and higher PTBP1 level was associated with poorer prognosis. It was shown that PTBP1 knockdown in vitro inhibited GC cell migration, whereas PTBP1 overexpression promoted the migration of GC cells. In vivo, the knockdown of PTBP1 notably reduced both the size and occurrence of metastatic nodules in a nude mice liver metastasis model. We identified phosphoglycerate kinase 1 (PGK1) as a downstream target of PTBP1 and found that PTBP1 increased the stability of PGK1 by directly binding to its mRNA. Furthermore, the PGK1/SNAIL axis could be required for PTBP1's function in the promotion of GC cell migration. These discoveries suggest that PTBP1 could be a promising therapeutic target for GC.

Effect of storage temperature on the dimensional stability of DLP printed casts.

STATEMENT OF PROBLEM: Despite studies focusing on the accuracy and dimensional stability of additive manufacturing, research on the impact of storage conditions on these properties of 3-dimensional (3D) printed objects is lacking. PURPOSE: The purpose of this in vitro study was to investigate the influence of storage temperature on the dimensional stability of digital light processing (DLP) printed casts and to determine how different locations in printed casts react differently. MATERIAL AND METHODS: A completely dentate maxillary typodont model was digitized with a desktop laser scanner. The typodont was subsequently modified with a software program by adding cuboids with a side length of 3 mm on both maxillary central incisors, first molars, and second molars. The file was saved in the standard tessellation language (STL) format. The modified digitized typodont was then processed through the DLP technology printing process with a desktop DLP printer and photopolymerizing resin. The casts were printed 32 times and stored in sealed plastic bags, shielded from light, and subjected to 4 different temperature conditions (-20 °C, 4 °C, 20 °C, and 37 °C, n=8 each). The cuboids on the central incisors were labeled as the P1 group, first molars as the P2 group, and second molars as the P3 group. The distance between the cuboids was measured 5 times, with results recorded immediately after cast production and at 1, 2, 3, 5, 7, 14, and 28 days after. Repeated analysis of variance (ANOVA) and the Tukey honestly significant difference (HSD) test were used to compare the recorded values among the groups (α=.05). RESULTS: In the P1 group, the casts stored at -20 °C exhibited the smallest overall size change, with a mean ±standard deviation volume of 99.42 ±0.04% compared with the original casts after 28 days of storage. This was followed by the casts stored at 4 °C, 20 °C, and 37 °C, with remaining volumes of 99.39 ±0.06% (P=.139), 99.14 ±0.08% (P<.001), and 98.96 ±0.03% (P<.001), respectively. For the P2 and P3 groups, casts stored at 4 °C retained the most volume at 99.82 ±0.01%, whereas those stored at -20 °C, 20 °C, and 37 °C underwent greater changes, with remaining volumes of 99.66 ±0.03%, 100.32 ±0.02%, and 100.44 ±0.02%, respectively (P<.001). The P3 group exhibited a similar trend to that of the P2 group, with the casts stored at 4 °C remaining closest to the original dimensions at 99.86 ±0.02%, while casts stored at -20 °C showed 99.73 ±0.03% of the original volume and those stored at 20 °C and 37 °C expanded with volumes of 100.37 ±0.03% and 100.48 ±0.03%, respectively (P<.001). CONCLUSIONS: DLP printed casts stored at 4 °C exhibited the greatest overall dimensional stability, followed sequentially by those stored at -20 °C, 20 °C, and 37 °C. Additionally, the study confirmed that the posterior and anterior teeth regions of DLP printed casts respond differently to different storage temperatures.

Case Report: A novel de novo variant of COL1A1 in fetal genetic osteogenesis imperfecta.

Objective: Osteogenesis imperfecta (OI) is a rare genetic disorder. Clinical severity is heterogeneous. The purpose of this study was to investigate the genetic characteristics of a fetus with OI by whole exome sequencing (WES) and identify the cause of the disease. Methods: In this study, a fetus with osteogenic dysplasia was referred to our hospital. DNA was extracted from the aborted fetal tissue and peripheral blood of the parents. To identify the pathogenic genes, we conducted the trio-WES using DNA. A de novo variant in the COL1A1 gene is suspected to be the cause of the OI phenotype. We used Sanger sequencing for validation and various bioinformatics methods (such as SIFT, PolyPhen2, Mutation Taster, conservative analysis, SWISS Model, glycosylation site prediction, and I-Mutant 2.0) for analysis. Results: Both WES and Sanger sequencing identified a novel de novo variant of COL1A1 (c. 1309G>A, p. Gly437Ser) in a fetus with OI. Bioinformatic analysis showed that the affected residue, p. Gly437, was highly conserved in multiple species and predicted that the variant was deleterious and may have an impact on protein function. This variant is present in highly conserved glycine residues of Gly-X-Y sequence repeats of the triple helical region of the collagen type I α chain, which may be the cause of OI. Conclusion: This study revealed that the c.1309G>A (p. Gly437Ser) variant in the COL1A1 gene may be the genetic cause of fetal OI in this case. The discovery of this variant enriched the variation spectrum of OI. WES improves the accurate diagnosis of fetal OI, and doctors can provide patients with appropriate genetic counseling.

Digitally designed occlusion of an implant-supported crown considering physiological tooth displacement under occlusal loading.

Physiological natural tooth displacement under occlusal loading can influence intraoral occlusal contacts. However, gypsum casts and digital scans cannot simulate the physiological tooth displacement under occlusal loading. The occlusal design of the implant-supported crowns has been based mainly on the experience of dental laboratory technicians, lacking accuracy and individualization. Therefore, a digital technique that considers physiological tooth displacement is presented to design the occlusion of implant-supported single crowns.

FACS-based genome-wide CRISPR screens define key regulators of DNA damage signaling pathways.

DNA damage-activated signaling pathways are critical for coordinating multiple cellular processes, which must be tightly regulated to maintain genome stability. To provide a comprehensive and unbiased perspective of DNA damage response (DDR) signaling pathways, we performed 30 fluorescence-activated cell sorting (FACS)-based genome-wide CRISPR screens in human cell lines with antibodies recognizing distinct endogenous DNA damage signaling proteins to identify critical regulators involved in DDR. We discovered that proteasome-mediated processing is an early and prerequisite event for cells to trigger camptothecin- and etoposide-induced DDR signaling. Furthermore, we identified PRMT1 and PRMT5 as modulators that regulate ATM protein level. Moreover, we discovered that GNB1L is a key regulator of DDR signaling via its role as a co-chaperone specifically regulating PIKK proteins. Collectively, these screens offer a rich resource for further investigation of DDR, which may provide insight into strategies of targeting these DDR pathways to improve therapeutic outcomes.

Prediction of Safety Risk Levels of Benzopyrene Residues in Edible Oils in China Based on the Variable-Weight Combined LSTM-XGBoost Prediction Model.

To assess and predict the food safety risk of benzopyrene (BaP) in edible oils in China, this study collected national sampling data of edible oils from 20 Chinese provinces and their prefectures in 2019, and constructed a risk assessment model of BaP in edible oils with consumption data. Initially, the k-means algorithm was used for risk classification; then the data were pre-processed and trained to predict the data using the Long Short-Term Memory (LSTM) and the eXtreme Gradient Boosting (XGBoost) models, respectively, and finally, the two models were combined using the inverse error method. To test the effectiveness of the prediction model, this study experimentally validated the model according to five evaluation metrics: root mean square error (RMSE), mean absolute error (MAE), precision, recall, and F1 score. The variable-weight combined LSTM-XGBoost prediction model proposed in this paper achieved a precision of 94.62%, and the F1 score value reached 95.16%, which is significantly better than other neural network models; the results demonstrate that the prediction model has certain stability and feasibility. Overall, the combined model used in this study not only improves the accuracy but also enhances the practicality, real-time capabilities, and expandability of the model.

CircNFATC3 promotes the proliferation of gastric cancer through binding to IGF2BP3 and restricting its ubiquitination to enhance CCND1 mRNA stability.

BACKGROUND: Insulin like growth factor II mRNA binding protein 3 (IGF2BP3) is an RNA binding protein with multiple roles in regulation of gene expression at the post-transcriptional level and is implicated in tumorigenesis and progression of numerous cancers including gastric cancer (GC). Circular RNAs (circRNAs) are a diverse endogenous noncoding RNA population that have important regulatory roles in cancer. However, circRNAs that regulate the expression of IGF2BP3 in GC is largely unknown. METHODS: CircRNAs that bound to IGF2BP3 were screened in GC cells using RNA immunoprecipitation and sequencing (RIP-seq). The identification and localization of circular nuclear factor of activated T cells 3 (circNFATC3) were identified using Sanger sequencing, RNase R assays, qRT-PCR, nuclear-cytoplasmic fractionation and RNA-FISH assays. CircNFATC3 expression in human GC tissues and adjacent normal tissues were measured by qRT-PCR and ISH. The biological role of circNFATC3 in GC was confirmed by in vivo and in vitro experiments. Furthermore, RIP, RNA-FISH/IF, IP and rescue experiments were performed to uncover interactions between circNFATC3, IGF2BP3 and cyclin D1 (CCND1). RESULTS: We identified a GC-associated circRNA, circNFATC3, that interacted with IGF2BP3. CircNFATC3 was significantly overexpressed in GC tissues and was positively associated with tumor volume. Functionally, the proliferation of GC cells decreased significantly after circNFATC3 knockdown in vivo and in vitro. Mechanistically, circNFATC3 bound to IGF2BP3 in the cytoplasm, which enhanced the stability of IGF2BP3 by preventing ubiquitin E3 ligase TRIM25-mediated ubiquitination, thereby enhancing the regulatory axis of IGF2BP3-CCND1 and promoting CCND1 mRNA stability. CONCLUSIONS: Our findings demonstrate that circNFATC3 promotes GC proliferation by stabilizing IGF2BP3 protein to enhance CCND1 mRNA stability. Therefore, circNFATC3 is a potential novel target for the treatment of GC.

Spermidine protects intestinal mucosal barrier function in mice colitis via the AhR/Nrf2 and AhR/STAT3 signaling pathways.

BACKGROUND: Aryl hydrocarbon receptor (AhR) activation promotes intestinal barrier repair and enhances the gut mucosal barrier function in inflammatory bowel diseases (IBD). Spermidine is beneficial in several murine models of IBD and may affect AhR activity. However, the precise effects of spermidine on the intestinal barrier and AhR remain unclear. This study was designed to investigate whether spermidine affects AhR and gut barrier function in IBD models as well as, its underlying mechanism. METHODS: We used dextran sulfate sodium (DSS)- and 2,4,6-trinitrobenzene sulfonic acid (TNBS)-induced mice, as well as, Caco2 cells incubated with TNF-α and IFN-γ to establish multiple IBD models, followed by spermidine intervention. Alcian blue/Periodic acid-Schiff (AB/PAS) staining, Fluorescein isothiocyanate (FITC)-dextran permeability assay, transepithelial electrical resistance (TER), tight junction protein (TJs) expression, and 16S rRNA scope in situ hybridization were performed to assess intestinal barrier function. AhR expression and the associated pathways were measured. AhR-targeted adeno-associated virus (AAV) and siRNA were used to explore the related molecular mechanisms. RESULTS: Spermidine significantly attenuated the increased intestinal permeability, decreased TER, abnormal distribution of TJs in colitis, and bacterial translocation from the gut tract. Additionally, it significantly increased AhR and Nrf2 expression and inhibited STAT3 phosphorylation. However, the protective effects of spermidine and the related alterations in pathway proteins were largely abolished by the specific inhibition of AhR. CONCLUSION: Our study demonstrated that spermidine rescues intestinal barrier defects in mice with colitis via the AhR-Nrf2 and AhR-STAT3 pathways, providing a potential therapeutic agent for IBD and other conditions associated with dysregulated gut barrier function.

Revelation for the Influence Mechanism of Long-Chain Fatty Acid Ethyl Esters on the Baijiu Quality by Multicomponent Chemometrics Combined with Modern Flavor Sensomics.

Long-chain fatty acid ethyl ester (LCFAEEs) is colorless and has a weak wax and cream aroma. It can be used as an intermediate for the synthesis of emulsifiers, and stabilizers and be applied in the production of flavor essence. It is also an important trace component in Baijiu and is attributed to making a contribution to the quality of Baijiu, but its distribution in Baijiu has not been clear, and its influence mechanisms on Baijiu quality have not been systematically studied. Therefore, the distribution of LCFAEEs for Baijiu in different years (2014, 2015, 2018, and 2022), different grades (premium, excellent, and level 1; note: here Baijiu grade classification was based on Chinese standard (GB/T 10781) and enterprise classification standard), and different sun exposure times (0, 6, 12, 20, 30, and 50 days) was uncovered. Thus, in this study, the effect of LCFAEEs on the quality of Baijiu was comprehensively and objectively proven by combining modern flavor sensomics and multicomponent chemometrics. The results showed that with the increase in Baijiu storage time, the concentration of LCFAEEs increased significantly in Baijiu (4.38-196.95 mg/L, p < 0.05). The concentration of LCFAEEs in level 1 Baijiu was significantly higher than that in excellent and premium Baijiu (the concentration ranges of ET, EP, EO, E9, E912, and E91215 were: 0.27-2.31 mg/L, 0.75-47.41 mg/L, 0.93-1.80 mg/L, 0.98-12.87 mg/L, 1.01-27.08 mg/L, and 1.00-1.75 mg/L, respectively, p < 0.05). With the increase in sun exposure time, the concentration of LCFAEEs in the Baijiu first increased significantly and then decreased significantly (4.38-5.95 mg/L, p < 0.05). As the flavor sensomics showed, the concentrations of LCFAEEs in Baijiu bodies were significantly correlated with the Baijiu taste sense (inlet taste, aroma sensation in the mouth), as well as with the evaluation after drinking (maintaining taste) (p < 0.05, r > 0.7). Based on the above, LCFAEEs are critical factors for Baijiu flavor thus, it is essential to explore a suitable concentration of LCFAEEs in Baijiu to make Baijiu's quality more ideal.

One-Step Calcination Synthesis of Bulk-Doped Surface-Modified Ni-Rich Cathodes with Superlattice for Long-Cycling Li-Ion Batteries.

Nickel-rich (Ni≥90 %) layered cathodes are critical materials for achieving higher-energy-density and lower-cost next-generation Li-ion batteries (LIBs). However, their bulk and interface structural instabilities significantly impair their electrochemical performance, thus hindering their widespread adoption in commercial LIBs. Exploiting Ti and Mo diffusion chemistry, we report one-step calcination to synthesize bulk-to-surface modified LiNi0.9 Co0.09 Mo0.01 O2 (NCMo90) featuring a 5 nm Li2 TiO3 coating on the surface, a Mo-rich Li+ /Ni2+ superlattice at the sub-surface, and Ti-doping in the bulk. Such a multi-functional structure effectively maintains its structural integrity upon cycling. As a result, such NCMo90 exhibits a high initial capacity of 221 mAh g-1 at 0.1 C, excellent rate performance (184 mAh g-1 at 5 C), and high capacity retention of 94.0 % after 500 cycles. This work opens a new avenue to developing industry-applicable Ni-rich cathodes for next-generation LIBs.

Core Constituents of Caragana sinica Root for Rheumatoid Arthritis Treatment and the Potential Mechanism.

PURPOSE: As a traditional herb product, the root of Caragana sinica (Buc'hoz) Rehder (Chinese name: Jin Quegen [JQG]) has been widely used in folk medicines for rheumatoid arthritis (RA) treatment. However, which herbal constituents exert a core pharmacological role in RA treatment remains a great challenge due to the multiple phytochemical constituents, targets, and pathways. In this work, we aimed to use a new strategy to explore the core herbal constituents and potential mechanisms of JQG against RA for the first time. METHODS: A successively partitioned extract of JQG, bioactive partition screening in vitro and in vivo, qualitative analysis, bioinformatic analysis, molecular docking, and mechanism validation were used in this study. The partitioned extract was used to obtain the bioactive partition, while in vitro anti-inflammatory effects and in vivo anti-arthritis effects in adjuvant-induced arthritis (AIA) rats were applied to screen the bioactive partition with the best efficacy. Qualitative analysis was used to identify bioactive constituents. Bioinformatic analysis was used to explore the potential mechanism for RA treatment. Molecular docking and immunofluorescence were used to validate the underlying mechanism. RESULTS: After successively partitioning extract and bioactive partition screening, ethyl acetate extract (EAE) yielded the best anti-inflammatory effects in vitro and in vivo among JQG extracts. By ultra-performance liquid chromatography (UPLC) coupled with Orbitrap mass spectrometry, a total of 58 constituents were identified in EAE, and 17 constituents were regarded as the core constituents based on their oral bioavailability and drug-like properties. The nuclear factor kappa B (NF-κB) signal pathway was screened as the core pathway of core constituents for RA treatment based on bioinformatic analysis, and the core constituents showed good ligand-receptor binding activity to NF-κB P65. In vitro study demonstrated that EAE could significantly reduce NF-κB P65 transfer from the cytoplasm to the nucleus. CONCLUSION: Our study suggested that the therapeutic efficacy of JQG for RA treatment could be derived from negative regulation of the NF-κB pathway, and EAE of JQG could represent a promising herb product for RA treatment that deserves further development.

Low pretreatment prognostic nutritional index predicts poor survival in breast cancer patients: A meta-analysis.

BACKGROUND: Prognostic nutritional index (PNI), as an indicator of nutritional immune status, has been shown to be associated with therapeutic effects and survival of solid tumors. However, the prognostic role of PNI before treatment in human breast cancer (BC) is still not conclusive. Hence, we performed this meta-analysis to assess the value of it in prognosis prediction for BC patients. MATERIALS AND METHODS: We searched PubMed, Embase, Web of Science and EBSCO to identify the studies evaluating the association between PNI and survival such as overall survival (OS), disease-free survival (DFS) of BC, and computed extracted data into hazard ratios (HRs) for OS, DFS and clinicopathological features with STATA 12.0. RESULTS: A total of 2322 patients with BC from 8 published studies were incorporated into this meta-analysis. We discovered that low pretreatment PNI was significantly associated with worse OS, but not with DFS in BC patients. In stratified analyses, the result showed that decreased PNI before treatment was remarkably related with lower 3-year, 5-year, 8-year and 10-year OS, but not with 1-year survival rate in BC. In addition, although reduced PNI could not impact 1-year, 3-year or 5-year DFS, it considerably deteriorated 8-year and 10-year DFS in patients. CONCLUSION: Low pretreatment PNI deteriorated OS, 8-year and 10-year DFS in BC patients, implicating that it is a valuable prognostic index and improving the nutritional immune status may offer a therapeutic strategy for these patients.

Effect of a novel interocclusal recording method on occlusal accuracy of implant-supported fixed prostheses: A randomized clinical trial.

OBJECTIVES: To investigate the effect of a novel interocclusal recording method on the occlusal accuracy of implant-supported fixed prostheses for partially dentate patients with distal extension. MATERIALS AND METHODS: Twenty patients with two or more adjacent teeth missing in the distal extension and scheduled to receive implant-supported fixed prostheses were enrolled. Two interocclusal recording methods were used: placing polyvinyl siloxane (PVS) on the interocclusal recording caps (test), and placing PVS on healing abutments (control). The intraoral occlusal contacts in maximal intercuspal position (MIP) were compared with those in the mounted casts to calculate sensitivity and positive predictive value (PPV). Then, patients were randomly allocated into two groups to determine which interocclusal record would be used. The implant prostheses' evaluations mainly included occlusal adjustment height, volume, and time, occlusal contact score based on articulating paper examination. Paired-samples t-test, Mann-Whitney U test, and least squares regression analyzed the statistic differences. RESULTS: The test method had higher sensitivity to detect intraoral occlusal contacts than the control method (p = .002), but similar PPV (p = .10). During the prostheses' evaluations, the occlusal adjustment height in the test group was significantly lower than that in the control group [99.4 (53.2, 134.2) vs. 159.0 (82.3, 247.8) µm, p = .03], while the occlusal contact score before adjustment was higher (p = .006). The groups had similar occlusal adjustment volume and time. CONCLUSIONS: The novel interocclusal recording method for implant-supported fixed prostheses was more accurate and could reduce the occlusal adjustment.