Photoredox Catalyzed Synthesis of gem-Difluoroalkenes and Monofluorinated Cyclooctenes via 1,5-HAT Process.

gem-Difluoroalkenes and monofluorinated cycloalkenes have emerged as basic structural units in a variety of bioactive molecules and natural products. Thus, developing straightforward and efficient methods for synthesizing fluorinated alkene compounds is of considerable significance. Herein, we disclose a visible-light-induced defluorination of 2-trifluoromethyl-1-alkene via a 1,5-HAT process using N-alkoxyphtalimides as both radical precursor and potential nucleophile. The mild and stepwise reaction leads to a variety of structurally diverse gem-difluoroalkenes and monofluorinated cyclooctenes with high efficiency, respectively.

Tailoring d-band center of high-valent metal-oxo species for pollutant removal via complete polymerization.

Polymerization-driven removal of pollutants in advanced oxidation processes (AOPs) offers a sustainable way for the simultaneous achievement of contamination abatement and resource recovery, supporting a low-carbon water purification approach. However, regulating such a process remains a great challenge due to the insufficient microscopic understanding of electronic structure-dependent reaction mechanisms. Herein, this work probes the origin of catalytic pollutant polymerization using a series of transition metal (Cu, Ni, Co, and Fe) single-atom catalysts and identifies the d-band center of active site as the key driver for polymerization transfer of pollutants. The high-valent metal-oxo species, produced via peroxymonosulfate activation, are found to trigger the pollutant removal via polymerization transfer. Phenoxyl radicals, identified by the innovative spin-trapping and quenching approaches, act as the key intermediate in the polymerization reactions. More importantly, the oxidation capacity of high-valent metal-oxo species can be facilely tuned by regulating their binding strength for peroxymonosulfate through d-band center modulation. A 100% polymerization transfer ratio is achieved by lowering the d-band center. This work presents a paradigm to dynamically modulate the electronic structure of high-valent metal-oxo species and optimize pollutant removal from wastewater via polymerization.

Enantioselective Construction of C-SCF3 Stereocenters via Nickel Catalyzed Asymmetric Negishi Coupling Reaction.

The construction of the SCF3-containing 1,1-diaryl tertiary carbon stereocenters with high enantioselectivities is reported via a nickel-catalyzed asymmetric C-C coupling strategy. This method demonstrates simple operations, mild conditions and excellent functional group tolerance, with newly designed SCF3-containing synthon, which can be easily obtained from commercially available benzyl bromide and trifluoromethylthio anion in a two-step manner. Further substrate exploration indicated that the reaction system could be extended to diverse perfluoroalkyl sulfide (SC2F5, SC3F7, SC4F9, SCF2CO2Et)-substituted 1,1-diaryl compounds with excellent enantioselectivities. The synthetic utility of this transformation was further demonstrated by convenient derivatization to optical SCF3-containing analogues of bioactive compounds without an apparent decrease in enantioselectivity.

A bivalent inhibitor against TDRD3 to suppress phase separation of methylated G3BP1.

The formation of membrane-less organelles is driven by multivalent weak interactions while mediation of such interactions by small molecules remains an unparalleled challenge. Here, we uncovered a bivalent inhibitor that blocked the recruitment of TDRD3 by the two methylated arginines of G3BP1. Relative to the monovalent inhibitor, this bivalent inhibitor demonstrated an enhanced binding affinity to TDRD3 and capability to suppress the phase separation of methylated G3BP1, TDRD3, and RNAs, and in turn inhibit the stress granule growth in cells. Our result paves a new path to mediate multivalent interactions involved in SG assembly for potential combinational chemotherapy by bivalent inhibitors.

Nickel-Catalyzed Asymmetric Decarboxyarylation with NHP Esters of α-Amino Acid to Chiral Benzylamines.

A nickel-catalyzed asymmetric decarboxyarylation of NHP esters via reductive cross-coupling has been established. Utilizing the NHP of amino acid esters as radical precursors furnishes a new protocol in which structurally diverse chiral benzylamines could be accessible. This method has demonstrated excellent catalytic efficiency, high enantioselective control, mild conditions, and good functional group tolerance, thus enabling the late-stage modification of bioactive molecules and pharmaceuticals.

Enantioselective catalytic radical decarbonylative azidation and cyanation of aldehydes.

Empowered by the ubiquity of carbonyl functional groups in organic compounds, decarbonylative functionalization was prevalent in the construction of complex molecules. Under this context, asymmetric decarbonylative functionalization has emerged as an efficient pathway to accessing chiral motifs. However, ablation of enantiomeric control in a conventional 2e transition metal-catalyzed process was notable because of harsh conditions (high temperatures, etc.) that are usually required. To address this challenge and use readily accessible aldehyde directly, we report the asymmetric radical decarbonylative azidation and cyanation. Diverse aldehydes were directly used as alkyl radical precursor, engaging in the subsequent inner-sphere or outer-sphere ligand transfer where functional motifs (CN and N3) could be incorporated in excellent site- and enantioselectivity. Mild conditions, broad scope, excellent regioselectivity (driven by polarity-matching strategy), and enantioselectivity were shown for both transformations. This radical decarbonylative strategy using aldehydes as alkyl radical precursor has offered a powerful reaction manifold in asymmetric radical transformations to construct functional motifs regio- and stereoselectively.

Photoinduced Copper-Catalyzed Monofluoroalkylation of Terminal Alkynes to Propargylic Fluorides.

A photoinduced copper-catalyzed strategy for the monofluoroalkylation of alkynes with readily available monofluoroalkyl triflates was developed. It provides a new protocol to access valuable propargyl fluoride compounds via C-C bond formation by avoiding the use of highly toxic fluorination reagents. This reaction proceeded under mild conditions to afford propargyl monofluorides in moderate to high yields. Preliminary mechanistic studies reveal that a ligand-matched alkynyl copper complex might be the key photoactive substance.

Nickel-Catalyzed Hydrotrifluoroalkylation of Alkynes to Construct Allylic Trifluoromethyl Terminal Alkenes.

Herein, we describe a nickel-catalyzed hydrotrifluoroalkylation of terminal alkyne for the synthesis of a manifold allylic trifluoromethyl terminal alkene. The combination of nitrogen and phosphine ligands, especially electron-rich ones, plays an indispensable role in the course of the reaction, promoting the reactivity to a remarkable level, demonstrating high efficiency, broad substrate scope, and favorable functional group compatibility. The strategy provides a facile method for the synthesis of diversified allylic CF3-containing drugs and bioactive molecules.

Asymmetric construction of allylicstereogenic carbon center featuring atrifluoromethyl group via enantioselective reductive fluoroalkylation.

Emerging as a powerful tool for lead optimization in pharmaceutical research and development, to develop the facile, general protocols that allows the incorporation of fluorine-containing motif in drug candidates has accumulated enormous research interest in recent years. Among these important motifs, the incorporation of strategic motif CF3 on aliphatic chain especially with the concomitant construction of trifluoromethylated alkanes bearing a CF3-substituted stereogenic carbon, is of paramount importance. Herein, we disclose an asymmetric nickel-catalyzed reductive trifluoroalkylation of alkenyl halides for enantioselective syntheses of diverse α-trifluoromethylated allylic alkanes, offering a general protocol to access the trifluoromethyl analogue to chiral α-methylated allylic alkanes, one of the most prevalent key components among natural products and pharmaceuticals. Utilities of the method including the application of the asymmetric trifluoroalkylation on multiple biologically active complex molecules, derivatization of transformable alkenyl functionality were demonstrated, providing a facile method in the diversity-oriented syntheses of CF3-containing chiral drugs and bioactive-molecules.

A General and Efficient Solution to Monofluoroalkylation: Divergent Synthesis of Aliphatic Monofluorides with Modular Synthetic Scaffolds.

Monofluoroalkanes are important in many pharmaceuticals, agrochemicals and functional materials. However, the lack of easily available and transformable monofluoroalkylating reagents that facilitate a broad array of transformations has hampered the application of monofluoroalkylation. Herein, we report a general and efficient method of preparing diverse aliphatic monofluorides with monofluoroalkyl triflate as the synthetic scaffold. Using both nickel-catalyzed hydromonofluoroalkylation of unactivated alkenes and copper-catalyzed C-C bond formation, the general diversification of the monofluoroalkylating scaffold has been exhibited. The broad utility of this monofluoroalkylating reagent is shown by concise conversion into various conventional fluoroalkylating reagents and construction of monofluoro-alkoxy, -alkylamino motifs with commercially available heteroatom-based coupling partners.

Modular Difunctionalization of Unactivated Alkenes through Bio-Inspired Radical Ligand Transfer Catalysis.

Development of visible light-mediated atom transfer radical addition of haloalkanes onto unsaturated hydrocarbons has seen rapid growth in recent years. However, due to its radical chain propagation mechanism, diverse functionality other than the pre-existing (pseudo-)halide on the alkyl halide source cannot be incorporated into target molecules in a one-step, economic fashion. Inspired by the prominent reactivities shown by cytochrome P450 hydroxylase and non-heme iron-dependent oxygenases, we herein report the first modular, dual catalytic difunctionalization of unactivated alkenes via manganese-catalyzed radical ligand transfer (RLT). This RLT elementary step involves a coordinated nucleophile rebounding to a carbon-centered radical to form a new C-X bond in analogy to the radical rebound step in metalloenzymes. The protocol leverages the synergetic cooperation of both a photocatalyst and earth-abundant manganese complex to deliver two radical species in succession to minimally functionalized alkenes, enabling modular diversification of the radical intermediate by a high-valent manganese species capable of delivering various external nucleophiles. A broad scope (97 examples, including drugs/natural product motifs), mild conditions, and excellent chemoselectivity were shown for a variety of substrates and fluoroalkyl fragments. Mechanistic and kinetics studies provide insights into the radical nature of the dual catalytic transformation and support radical ligand transfer (RLT) as a new strategy to deliver diverse functionality selectively to carbon-centered radicals.

Enantioselective Synthesis of Secondary ß-Trifluoromethyl Alcohols via Catalytic Asymmetric Reductive Trifluoroalkylation and Diastereoselective Reduction.

Fluorinated motifs are frequently encountered in drugs and agrochemicals. Incorporating fluorine-containing motifs in drug candidates for lead optimization in pharmaceutical research and development has emerged as a powerful tool. The construction of molecules that feature a trifluoromethyl (CF3-) group on a stereogenic carbon has accumulated broad research efforts. Unlike its well-explored, biologically active methyl counterpart, asymmetric construction of ß-trifluoromethylated alcohols bearing adjacent stereocenters still remains elusive. Through retrosynthetic analysis, we posited that followed by sequential reduction of carbonyl, the initial construction of chiral α-trifluoromethylated ketones could render the desired product in a facile, one-pot fashion. Herein, we developed the first example of nickel-catalyzed asymmtric reductive cross-coupling trifluoroalkylation of acyl chlorides for enantioselective synthesis of diverse α-trifluoromethylated ketones. The one-pot reduction of these α-trifluoromethylated ketones furnished corresponding alcohols bearing ß-CF3-substituted stereogenic carbons with excellent diastereoselectivity and complete enantioselective retention. High yields/enantioselectivity, mild conditions, and good functional group compatibility are shown in the system. Utilities of the method are also illustrated by applying asymmetric, late-stage trifluoroalkylation of biologically active complex molecules, revealing tremendous potential for development of CF3-containing chiral drugs.

Development of Axially Chiral Styrene-Type Carboxylic Acid Ligands via Palladium-Catalyzed Asymmetric C-H Alkynylation.

A weakly coordinated carboxylate-directed palladium-catalyzed atroposelective C-H alkynylation method for the development of novel axially chiral styrene-type carboxylic acids is disclosed. This transformation exhibits good yields (up to 85%), excellent enantiocontrol (up to 99% ee), and mild conditions. Notably, the synthetic utility of the resulting alkynyl carboxylic acid derivatives was demonstrated by various derivatizations as well as their potential as chiral ligands in asymmetric C-H activations.

Nickel-catalyzed reductive monofluoroakylation of alkyl tosylate with bromofluoromethane to primary alkyl fluoride.

A nickel-catalysed direct terminal monofluoromethlyation between alkyl tosylates and a low-cost, industrial raw material bromofluoromethane has been developed. This transformation has demonstrated high efficiency, mild conditions, and good functional-group compatibility. The key to success of this transformation lies in the ligand and mild base selection, ensuring the generation of various terminal monofluormethylation products.

Copper-Catalyzed Enantioselective Arylation via Radical-Mediated C-C Bond Cleavage: Synthesis of Chiral ω,ω-Diaryl Alkyl Nitriles.

The first example of copper-catalyzed ring-opening, enantioselective arylation of cyclic ketoxime esters to access ω,ω-diaryl alkyl nitriles has been developed in high yield (up to 92% yield) with excellent enantioselectivity (up to 91% ee). Side-arm bis(oxazoline) ligand plays a significant role in this asymmetric catalytic transformation, which provides an efficient route to construct diverse chiral ω,ω-diaryl alkyl nitriles. Synthetic utility has also been demonstrated in the further derivatization of the ω,ω-diaryl alkyl nitrile to the corresponding amide.

Facile synthesis of axially chiral styrene-type carboxylic acids via palladium-catalyzed asymmetric C-H activation.

A novel method by a one-step introduction of axial chirality and sterically hindered group has been developed for facile synthesis of axially chiral styrene-type carboxylic acids. With the palladium-catalyzed C-H arylation and olefination of readily available cinnamic acid established, this transformation demonstrated excellent yield, excellent stereocontrol (up to 99% yield and 99% ee), and broad substrate scope under mild conditions. The axially chiral styrene-type carboxylic acids produced have been successfully applied to Cp*CoIII-catalyzed asymmetric C-H activation reactions, indicating their potential as chiral ligands or catalysts in asymmetric synthesis.

Copper-catalyzed monochloromethylazidation to access transformable terminal alkyl chlorides using stoichiometric BrCH2Cl.

Efficient copper-catalyzed 1,2-difunctionalization of alkenes with commercially available BrCH2Cl as a chloromethylating source was carried out, in which mild conditions, high reactivity, excellent functional-group tolerance, and late-stage modification of a bioactive molecule are demonstrated. This strategy offers a solution for the diverse syntheses of nitrogen-containing terminal alkyl chlorides, a common synthetic handle that is promising for multiple derivatizations. Mechanistic studies indicate that a chloromethyl radical is involved in the catalytic cycle.

Nickel-Catalyzed Cross-Coupling of Ethyl Chlorofluoroacetate with Aryl Bromides.

A combinatorial nickel-catalyzed monofluoroalkylation of aryl bromides with the industrial raw regent ethyl chlorofluoroacetate has been developed. The two key factors to successful conversion are the combination of nickel with readily available nitrogen and phosphine ligands and the using of a mixture of different solvents. Mechanistic investigations indicated a new zinc regent might generated in situ and be involved in the reaction process.

Diversity-Oriented Synthesis of Aliphatic Fluorides via Reductive C(sp3 )-C(sp3 ) Cross-Coupling Fluoroalkylation.

Monofluorinated alkyl compounds are of great importance in pharmaceuticals, agrochemicals and materials. Herein, we describe a direct nickel-catalyzed monofluoromethylation of unactivated alkyl halides using a low-cost industrial raw material, bromofluoromethane, by demonstrating a general and efficient reductive cross-coupling of two alkyl halides. Results with 1-bromo-1-fluoroalkane also demonstrate the viability of monofluoroalkylation, which further established the first example of reductive C(sp3 )-C(sp3 ) cross-coupling fluoroalkylation. These transformations demonstrate high efficiency, mild conditions, and excellent functional-group compatibility, especially for a range of pharmaceuticals and biologically active compounds. Mechanistic studies support a radical pathway. Kinetic studies reveal that the reaction is first-order dependent on catalyst and alkyl bromide whereas the generation of monofluoroalkyl radical is not involved in the rate-determining step. This strategy provides a general and efficient method for the synthesis of aliphatic fluorides.