Chitosan/zein-based sustained-release composite films: Fabrication, physicochemical properties and release kinetics of tea polyphenols from polymer matrix.

This study investigated the properties of chitosan/zein/tea polyphenols (C/Z/T) films and analyzed the release kinetics of tea polyphenols (TP) in various food simulants to enhance the sustainability and functionality of food packaging. The results revealed that TP addition enhanced the hydrophilicity, opacity and mechanical properties of film, and improved the compatibility between film matrix. 1.5 % TP film showed the lowest lightness (76.4) and the highest chroma (29.1), while 2 % TP film had the highest hue angle (1.5). However, the excessive TP (above 1 % concentration) led to a decrease in compatibility and mechanical properties of film. The TP concentration (2 %) resulted in the highest swelling degree in aqueous (750.6 %), alcoholic (451.1 %), and fatty (6.4 %) food simulants. The cumulative release of TP decreased to 16.32 %, 47.13 %, and 5.87 % with the increase of TP load in the aqueous, alcoholic, and fatty food simulants, respectively. The Peleg model best described TP release kinetics. The 2 % TP-loaded film showed the highest DPPH (97.13 %) and ABTS (97.86 %) free radical scavenging activity. The results showed TP release influenced by many factors and obeyed Fick's law of diffusion. This study offered valuable insights and theoretical support for the practical application of active films.

Development and application of mathematical modeling of thymol release from environmental-responsive potato starch active packaging films.

Traditional active packaging materials are easily affected by the environment, resulting in their inability to release active substances in specified quantities at specified times and locations. In this study, MCM-41 was used as a thymol (THY) carrier and added to the potato starch (PS) matrix to design an intelligent release active packaging film based on storage microenvironment. MCM-41 encapsulation improved thermal stability of THY. THY-MCM-41 addition significantly improved the tensile strength (TS, 7.18 MPa) of the film (P < 0.05) and endowed the film excellent gas and water barrier protection. THY release was responsive to temperature and relative humidity (RH), and the First-order model better explained the THY release pattern (R2 > 0.980). The THY-MCM-41/PS film exhibited long-term antibacterial effect during 10-day storage due to the sustained release of THY. Additionally, strawberries packaged in the THY-MCM-41/PS film exhibited the best sensory characteristics during 5-day storage (25 °C and 50 % RH). Overall, the present THY-MCM-41/PS film provides a novel alternative for the sustained release of active substances in order to achieve the excellent preservation of goods such as fruits and vegetables.

Preparation of hydroxypropyl methylcellulose/pueraria-based modified atmosphere film and its influence on delaying the senescent process of postharvest Agaricus bisporus.

Based on the key factor of spontaneous modified atmosphere packaging (MAP)-gas permeability, a spontaneous MAP film was created for the preservation of Agaricus bisporus by delaying the senescence of white mushrooms. Compared with other mixed films, hydroxypropyl methylcellulose (HPMC)/pueraria (P)-2 showed better mechanical properties, barrier properties and thermal stability energy. Applying the HPMC/P-2 film for preserving white mushrooms can spontaneously adjust the internal gas environment. Moreover, the O2 concentration in the package remained stable at 1-2 %, and the CO2 concentration was between 8 % and 14 %. The film can effectively reduce the respiration rate of white mushrooms, inhibit enzymatic browning, maintain their good color and texture, and delay their aging. In conclusion, the HPMC/P-2 film can be used not only for fruit and vegetables preservation but also provide theoretical basis for sustainable food packaging.

Relationship between optical properties and internal quality of potatoes during storage.

The optical properties [absorption coefficient (µa) and reduced scattering coefficient (µs')] and internal quality [firmness (FI), moisture content (MC), and soluble solids content (SSC)] of stored potatoes at 25 °C were determined, along with ultrastructure observation. Potato tissue ultrastructure changed significantly with storage time, exhibiting enhanced scattering properties and a monotonic increase in µs'. The µa spectra showed significant correlations with MC and SSC, while the µs' spectra were more strongly correlated with FI. The competitive adaptive reweighted sampling (CARS) algorithm improved the prediction accuracy for partial least squares regression (PLSR) and support vector regression (SVR) models. The best predictions were 1st-Derivative-µs'-FI-PLSR (RP = 0.897, RMSEP = 0.036 N, RPD = 2.262), SG-µa -MC-SVR (RP = 0.886, RMSEP = 0.438 %, RPD = 2.157), and Raw-µa -SSC-SVR (RP = 0.873, RMSEP = 0.137 %, RPD = 2.050). These results demonstrate the potential for predicting internal quality using potato's optical properties.

Preparation and characterization of active films based on oregano essential oil microcapsules/soybean protein isolate/sodium carboxymethyl cellulose.

This study aimed to prepare oregano essential oil microcapsules (EOMs) by the active coalescence method using gelatin and sodium alginate as wall materials and oregano essential oil (OEO) as the core material. EOMs were added to the soybean protein isolate (SPI)/sodium carboxymethyl cellulose (CMC) matrix to prepare SPI-CMC-EOM active films, and the physical and chemical features of the active films and EOMs were characterized. The results showed that the microencapsulated OEO could protect its active ingredients. Scanning electron microscopy results showed that EOMs were highly compatible with the film matrix. The solubility of active films decreased upon adding EOMs, and their ultraviolet resistance and thermal stability also improved. When the added amount of EOMs was 5 %, the active films had the best mechanical properties and the lowest water vapor permeability. The active films prepared under this condition had excellent comprehensive performance. Also, adding EOMs considerably enhanced the antioxidant of the active films and endowed them with antibacterial properties. The application of the SPI-CMC-EOM films to A. bisporus effectively delayed senescence and maintained the freshness of the postharvest A. bisporus. This study provided a theoretical foundation for the incorporation of EOMs into active films based on biological materials.

Acidogenic fermentation of potato peel waste for volatile fatty acids production: Effect of initial organic load.

As a renewable carbon source produced from organic wastes by acidogenic fermentation, volatile fatty acids (VFAs) are important intermediates in chemical and biological fields and beneficial to resource recovery and carbon neutrality. Maximizing VFA production by some strategies without additional chemicals is critical to increasing economic and environmental benefits. In this study, the effects of initial organic load (OL) on the performance of VFA production, variations of intermediate metabolites, and the thermogravimetric properties of potato peel waste (PPW) during batch acidogenic fermentation were studied. The results showed that the concentration of VFAs increased with the increase of initial OL, while the VFA yield decreased with the increase of initial OL. When the initial OL was in the range of 28.4 g VS/L-91.3 g VS/L, the fermentation type of PPW was butyric acid fermentation. The highest butyric acid proportion of 61.3% was achieved with the initial OL of 71.5 g VS/L. With the increase of initial OL, the proportion of acetic acid and the utilization rate of protein in the PPW decreased. VFAs were produced from proteins and carbohydrates in the early stage and mainly produced from carbohydrates in the later stage. The production efficiency of VFA was relatively high with the initial OL of 71.5 g VS/L, because more easily-biodegradable compounds were solubilized. The results showed that suitably increased initial OL could accelerate acidogenesis, reduce hydrolysis time, and increase the proportion of butyric acid. The findings in this work suggest that PPW is a promising feedstock for butyric acid biosynthesis and appropriate initial OL is beneficial to VFA production.

Effect of potato peel on the determination of soluble solid content by visible near-infrared spectroscopy and model optimization.

The quantitative determination of the soluble solid content (SSC) of potatoes using NIR spectroscopy is useful for predicting the internal and external quality of potato products, especially fried products. In this study, the effect of peel on the partial least squares regression (PLSR) quantitative prediction of potato SSC was investigated by transmission and reflection. The results show that the variable sorting for normalization (VSN) pre-processing method improved model accuracy. Additive multiplicative scattering effects and intensity drift interference of the peels were reduced. The model accuracy reached a correlation coefficient of prediction (RP) of 0.85. The selection algorithm using variable combination population analysis and iterative retention of information variables (VCPA-IRIV) demonstrated that peel increases unnecessary information. When the effect of irrelevant variables was reduced, the results reached RP = 0.88 and the root mean square error of prediction (RMSEP) = 0.25 in the transmission mode was close to that of the full-wavelength peeled PLSR model (RP = 0.89 and RMSEP = 0.25). This indicates that the use of the combined algorithm (VSN-VCPA-IRIV) reduces the effect of the peel and enables samples with a peel to still be predicted accurately in the full-wavelength model. It also improves detection efficiency through the extraction of the necessary variables and optimizes the stability and accuracy of the model.

Properties of an active film based on glutenin/tamarind gum and loaded with binary microemulsion of melatonin/pummelo essential oil and its preservation for Agaricus bisporus.

In order to improve the effectiveness of the active packaging, we aimed to develop an active packaging film with unidirectional sustained release, high barrier protection, and seamless attachment between the layers. An active film based on glutenin/tamarind gum loaded with the binary microemulsion of melatonin/pummelo essential oil (G/T-M-E) with sustained release and combination effects of internal and external layers was prepared. The outer barrier layer exerted an excellent protective barrier effect after adding (3-chloropropyl) triethoxysilane, which effectively reduced external interference and the ineffective diffusion of active substances in the inner layer. The effective attachment of melatonin and essential oil layer in the G/T-M-E film enhanced antioxidation, microorganism inhibition, and free-radical-scavenging properties, which effectively delayed the senescence of post-harvest white mushrooms. Furthermore, the G/T-M-E exhibited excellent tensile strength, barrier capacity, and load-bearing strength, which had a potential, positive effect on food preservation. Therefore, this film is highly recommended for packaging purposes.

Enhanced degradation of oxytetracycline in aqueous solution by DBD plasma-coupled vacuum ultraviolet/ultraviolet (VUV/UVC) system.

A systematic investigation of coupling dielectric barrier discharge (DBD) plasma and different ultraviolet bands (UVA, UVB, UVC, and VUV) was constructed for antibiotic-contaminant wastewater treatment. Compared with DBD, UV, or other combined DBD/UV systems, the DBD/VUV/UVC system exhibited excellent degradation and mineralization efficiencies for oxytetracycline (OTC), achieving 93.2% removal rate (reaction rate constant 1.05 min-1) and higher decarbonization efficiency (mineralization rate 0.47 mg C min-1) within 2.5 min treatment. The radical quenching tests revealed that HO⋅, O2·-, and 1O2 were all involved in the decomposition of OTC in the DBD/VUV/UVC system, among which O2·- played a dominant role. Possible degradation pathways of OTC in the DBD/VUV/UVC process were proposed using density functional theory and detected intermediates. Four indexes were used to assess the toxicity of OTC and its degraded intermediates. The inorganic anions and HA slightly reduced the degradation efficiency of the DBD/VUV/UVC system. This research provides new ideas to broaden the application of plasma and alleviate the water environment crisis.

Design of carboxymethyl chitosan-reinforced pH-responsive hydrogels for on-demand release of carvacrol and simulation of release kinetics.

pH-responsive carboxymethyl chitosan (CC)/sodium alginate (SA)/carvacrol (CA) hydrogels were prepared using CC and SA as wall materials. The formation of hydrogels is attributed to electrostatic interactions and hydrogen bonding. The thermostability of the hydrogels was improved with increasing CC content. The swelling degree of the hydrogels increased with increasing pH of the buffer solution. The mechanism of CA release was mainly controlled by Fickian diffusion. Notably, the release rate of CA was positively correlated with temperature and environmental pH, thus the on-demand release of CA can be achieved through pH stimulation. The hydrogels showed good storage stability via determination of antioxidant and antibacterial activities. Furthermore, the C4S1-CA hydrogels (CC/SA blends with dry mass ratios of 4:1, w/w) have good biocompatibility and biosafety. The CC/SA/CA hydrogels provide a unique route for environmentally-responsive preservatives and present new avenues for precise release and intelligent preservation.

Characterization and release kinetics model of thymol from starch-based nanocomposite film into food simulator.

To improve the performance of potato starch films and solve the problems of high volatility and low stability of thymol (Thy), thymol was loaded into the channel of SBA-15 to prepare Thy-SBA-15, and the Thy-SBA-15/potato starch film was prepared. The results showed thymol was successfully loaded into the pores of SBA-15. The addition of Thy-SBA-15 enhanced the tensile strength of potato starch film (3.93 Mpa), reduced the water vapor permeability (1.56 × 10-12  g·d-1  m-1  Pa-1 , WVP) and moisture absorption (80.97%, MA), which enhanced the barrier properties of the films. Thy-SBA-15 had good compatibility with potato starch films. Notably, the thymol released from Thy-SBA-15/potato starch film was initially explosive, and then continuous, which showed this film could effectively slow down the release rate of thymol and prolong the fresh-keeping period of food. The Korsmeyer-Peppas model M t M ∞ = k t n (R2  > .96) had the best fit for the release curve of thymol. PRACTICAL APPLICATIONS: This work offers a new method for the preparation of potato starch sustained-release antibacterial film, and provides a theoretical basis and technical support for the development of intelligent packaging.

Characterization and Release Kinetics Study of Active Packaging Films Based on Modified Starch and Red Cabbage Anthocyanin Extract.

Active packaging films were prepared by adding red cabbage anthocyanin extract (RCAE) into acetylated distarch phosphate (ADSP). This paper investigated the influence of the interaction relationship between RCAE and the film matrix on the structure, barrier, antioxidant and release properties of active films. Sixteen principal compounds in RCAE were identified as anthocyanins based on mass spectroscopic analysis. Micromorphological observations indicated that the RCAE distribution uniformity in the films decreased as the RCAE content increased. When the concentration of RCAE was not higher than 20%, the moisture absorption and oxygen permeability of films decreased. The stability of RCAE in the films was enhanced by the electrostatic interaction between RCAE and ADSP with the formation of hydrogen bonds, which facilitated the sustainability of the antioxidant properties of films. The release kinetics of RCAE proved that the release rate of RCAE in active films was the fastest in distilled water, and Fickian's law was appropriate for portraying the release behavior. Moreover, the cytocompatibilty assay showed that the test films were biocompatible with a viability of >95% on HepG2 cells. Thus, this study has established the suitability of the films for applications in active and food packaging.

Pretreatment with high oxygen controlled atmosphere enhanced fresh-cut white mushroom (Agaricus bisporus) quality via activating wounding stress defenses.

BACKGROUND: High oxygen treatment has been proven to be effective in fresh-cut white mushroom preservation, however, the preservation effect and possible mechanisms in high oxygen controlled atmosphere pretreatment (HOCAP) on wounding stress are incompletely understood. RESULTS: In this study, based on the time chosen of HOCAP research, whole white mushrooms treated with 3 h HOCAP (80% O2 + 20% CO2 ) and the wounding resistant responses of their slices were mainly investigated through phenylpropane pathway, reactive oxygen species (ROS) scavenging system, and ascorbate-glutathione (AsA-GSH) cycle. Results showed that 3 h HOCAP can induce the production of hydrogen peroxide (H2 O2 ) and superoxide anion (O2 -• ) in the early stage, as well as the NADPH oxidase activity. Enzymes and endogenous antioxidants involved in ROS scavenging were enhanced by HOCAP during the whole storage. Besides, HOCAP maintained high level of phenylalanine ammonia-lyase (PAL) activity, enhanced the content of total phenolic and lignin, accelerated the AsA-GSH cycle. CONCLUSION: The results demonstrated that HOCAP induced defense responses by increasing the ROS in the early stage which stimulated the activities of ROS scavenging enzymes, along with the capability of increasing for wounding stress defense and resistance. This study provides a theoretical pretreatment technology for fresh-cut white mushroom preservation. © 2021 Society of Chemical Industry.

Preparation, characterization and application of poly(lactic acid)/corn starch/eucalyptus leaf essential oil microencapsulated active bilayer degradable film.

This study aimed to develop a composite bilayer film based on corn starch (CS)/polylactic acid (PLA). The film had a hydrophobic outer layer and an absorbent inner layer. A natural bioactive substance was incorporated into the inner layer, namely, eucalyptus essential oil microcapsules (EOM). This allowed most of the bioactive substance to be released inside the storage environment. The effects of different amounts of EOM on the physical, mechanical, antioxidant, and antimicrobial properties of the films were investigated. Based on the results of scanning electron microscopy (SEM), the addition of 10-15 mL/100 mL of EOM could be uniformly distributed in the film. The addition of less than 15 mL/100 mL of EOM to the film improved its tensile strength, barrier properties, and elongation at break. The addition of too much EOM led to cracks in the film. The addition of EOM also greatly improved the antioxidant and antibacterial properties of the bilayer film. The best performance was obtained when the added amount was 15 mL/100 mL. Films with the best overall properties were used for preserving Agaricus bisporus. In preservation experiments, this film inhibited the respiration rate of A. bisporus, slowed down the consumption of organic matter, and maintained its moisture content. Compared with other cling films, the shelf life of A. bisporus was greatly extended.

Effect of pH on volatile fatty acid production and the microbial community during anaerobic digestion of Chinese cabbage waste.

The effects of pH on the production of volatile fatty acids (VFAs) and the evolution of microbial community structure were studied via anaerobic fermentation of Chinese cabbage waste. The results showed that the concentration of total VFAs was highest at 20,241.4 mg COD/L at pH 6.0, followed by pH 7.0. Ethanol, acetate and butyrate were dominant under the acidic condition. The main products at pH 7.0 were acetate, propionate, and butyrate. Ethanol, acetate and butyrate were rapidly produced during the initial stage. The hexanoate concentration increased quickly from day 6 due to the chain extension between ethanol and butyrate, and was 4,885.1 mg COD/L on day 8, accounting for 30.4% of the total VFAs. As fermentation was extended, Bacteroidia and Clostridia were dominant at pH 6.0 and the uncontrolled pH, respectively. Clostridium IV, Ruminococcus, and Candida, were suspected to be related to hexanoate production.

Characterization and release kinetics study of potato starch nanocomposite films containing mesoporous nano-silica incorporated with Thyme essential oil.

This study aimed to develop potato starch nanocomposite films containing mesoporous nano-silica (SBA-15, SBA-16 and MCM-41) incorporated with Thyme essential oil (TEO). TEO-SBA-15/potato starch films, TEO-SBA-16/potato starch films and TEO-MCM-41/potato starch films were prepared based on potato starch. The physical and mechanical properties of the nanocomposite films were also investigated. The results showed that the addition of mesoporous nano-silica incorporated with TEO improved the properties of potato starch nanocomposite films. Especially, the addition of TEO-MCM-41 markedly enhanced the tensile strength (4.33 MPa), and reduced the water vapor permeability (1.80 g·m-1·h-1·KPa-1) and moisture absorption (37.67%) of potato starch nanocomposite films. The results of scanning electron microscopy (SEM) analysis showed that TEO-MCM-41 hardly agglomerated in the potato starch nanocomposite films. Additionally, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) confirmed that strong hydrogen bonds were formed between TEO-MCM-41 and potato starch. The release kinetics of TEO proved that incorporating TEO into the pores of mesoporous nano-silica could delay its release rate, and the Peleg model (t/(Mt - M0) = K1 + K2t) was suitable for describing the release behavior. The findings of this study suggested that TEO-MCM-41/potato starch films had a good application prospect in the field of slow-releasing and antimicrobial packaging materials.

Melatonin retards senescence via regulation of the electron leakage of postharvest white mushroom (Agaricus bisporus).

Currently, melatonin (N-acetyl-5-methoxytrytamine) is recognized as a potential scavenger of free radicals. In this study, the effect of exogenous melatonin at various concentrations (0.05, 0.1, and 0.2 mM) on the texture, sensory qualities, and electron leakage in white mushrooms was evaluated at 3 ± 1 °C. It was observed that mushrooms treated with 0.1 mM melatonin were of good quality and their electron leakage was dramatically dampened. The results showed that 0.1 mM melatonin retained a higher adenosine triphosphate level and also prevented the release of cytochrome c into the cytoplasm. More significantly, it prominently inhibited electron leakage by increasing the activities of complexes I and III by the upregulation of AbNdufB9 and AbRIP1. It also regulated respiratory states in mushrooms; delayed the decline of respiratory state 3; enhanced respiratory state 4; boosted the oxidative phosphorylation and efficiency of mitochondria; and ultimately retarded the senescence of the white mushrooms.

Effect of different vegetable wastes on the performance of volatile fatty acids production by anaerobic fermentation.

Volatile fatty acids (VFAs) are intermediates of anaerobic fermentation with high value and wide range of usage. VFA production from vegetable wastes (VW) is an effective way to dispose of wastes and recover resources. The organic matter composition of the substrate influences VFA yield and distribution, which is related to the separation and purification of the downstream steps and the application of the product. Hence, potato peels, carrots, celery, and Chinese cabbage were selected to investigate the effect of VW types on the performance of the VFA production in a batch anaerobic fermentation reactor with continuous stirring at 37 °C, total solid (TS) of 4.5%. A VFA yield of 452 mg COD/g VSfeed (chemical oxygen demand (COD); volatile solids (VS)) was achieved from potato peels, which was 40.1%, 21.5%, and 124.9% higher than that of carrots, celery, and Chinese cabbage, respectively. The rapid acidification of carrots caused a sharp decline in pH and led to inhibition of VFA production. The acidification of celery started slowly, and the yield of hexanoic acid increased rapidly in the later stage of fermentation. The VFA yield of Chinese cabbage was inhibited due to the low initial pH, but the ethanol concentration reached 7577.04 mg COD/L. According to the VFA profile, the fermentation of potato peels, carrots, celery, and Chinese cabbage can be classified as propionate-type, butyrate-type, mixed-acid type, and ethanol-acetate type metabolic pathway, respectively. The results of this study suggest that a suitable combination of vegetable waste types is important for selective VFA production.

Development and characterization of corn starch/PVA active films incorporated with carvacrol nanoemulsions.

An active film was prepared by corn starch (CS), polyvinyl alcohol (PVA) and carvacrol nanoemulsions (CNE). The microstructure and properties of CNE/corn starch/PVA (CNE/CSP) films were characterized and investigated. Scanning electron microscopy (SEM) revealed the uniform distribution of CNE and discontinuity of the film matrix. Fourier transform infrared (FT-IR) and rheological analysis indicated that CNE could weaken molecular interaction of the film matrix. X-ray diffraction (XRD) show that the films are amorphous and CNE has no effect on crystal structure of the films. Incorporation of CNE significantly increased the tensile strength, Young's modulus, elongation at break, barrier (water vapor and ultraviolet), antioxidant and antifungal activity. With the CNE incorporated, the optimal tensile strength, Young's modulus, elongation at break and antioxidant activity of the films can reach 12 MPa, 11 MPa, 133%, 81%, respectively. Minimum water vapor permeability was 3.1 × 10-12 gd-1m-1Pa-1. Notably, films incorporated with CNE (≥20%) had good DPPH free radical scavenging ability (>50%) when stored up to 6 days. Films with 25% CNE exhibited excellent antifungal activity against Trichoderma sp. and its inhibitory zone was 47 mm. Overall, the CSP films loaded with CNE (>15%) could be used as food packing materials with good antioxidant and antimicrobial activities.

Effect of pH on volatile fatty acid production from anaerobic digestion of potato peel waste.

In this study, potato peel waste was used as feedstock to produce volatile fatty acids (VFAs) by anaerobic digestion. The effects of different pH levels (pH 5.0, pH 7.0, pH 11.0, and uncontrolled pH) on VFA concentration and composition, intermediate products, and metabolic state were evaluated. The results showed that the highest total VFA production was achieved with pH 7.0 (41.9 g COD/L and 632.2 mg COD/g VSfed), followed by that with uncontrolled pH. Butyric acid was the dominant product under acidic pH, whereas acetic acid dominated under alkaline pH. The type of acidogenic fermentation at pH 7.0 was the mixed-acid type. The change in NADH level in the mixed-acid type of fermentation consisted of small fluctuations, enhancing the stability and efficiency of fermentation. The enzymatic activities of acetate kinase and butyrate kinase were slightly inhibited at pH 5.0 and 11.0, resulting in relatively low VFAs production.