Starch-mediated colloidal chemistry for highly reversible zinc-based polyiodide redox flow batteries.

Aqueous Zn-I flow batteries utilizing low-cost porous membranes are promising candidates for high-power-density large-scale energy storage. However, capacity loss and low Coulombic efficiency resulting from polyiodide cross-over hinder the grid-level battery performance. Here, we develop colloidal chemistry for iodine-starch catholytes, endowing enlarged-sized active materials by strong chemisorption-induced colloidal aggregation. The size-sieving effect effectively suppresses polyiodide cross-over, enabling the utilization of porous membranes with high ionic conductivity. The developed flow battery achieves a high-power density of 42 mW cm-2 at 37.5 mA cm-2 with a Coulombic efficiency of over 98% and prolonged cycling for 200 cycles at 32.4 Ah L-1posolyte (50% state of charge), even at 50 °C. Furthermore, the scaled-up flow battery module integrating with photovoltaic packs demonstrates practical renewable energy storage capabilities. Cost analysis reveals a 14.3 times reduction in the installed cost due to the applicability of cheap porous membranes, indicating its potential competitiveness for grid energy storage.

Halide Exchange in Perovskites Enables Bromine/Iodine Hybrid Cathodes for Highly Durable Zinc Ion Batteries.

With the increasing need for reliable storage systems, the conversion-type chemistry typified by bromine cathodes attracts considerable attention due to sizeable theoretical capacity, cost efficiency, and high redox potential. However, the severe loss of active species during operation remains a problem, leading researchers to resort to concentrated halide-containing electrolytes. Here, profiting from the intrinsic halide exchange in perovskite lattices, a novel low-dimensional halide hybrid perovskite cathode, TmdpPb2[IBr]6, which serves not only as a halogen reservoir for reversible three-electron conversions but also as an effective halogen absorbent by surface Pb dangling bonds, C─H…Br hydrogen bonds, and Pb─I…Br halogen bonds, is proposed. As such, the Zn||TmdpPb2[IBr]6 battery delivers three remarkable discharge voltage plateaus at 1.21 V (I0/I-), 1.47 V (I+/I0), and 1.74 V (Br0/Br-) in a typical halide-free electrolyte; meanwhile, realizing a high capacity of over 336 mAh g-1 at 0.4 A g-1 and high capacity retentions of 88% and 92% after 1000 cycles at 1.2 A g-1 and 4000 cycles at 3.2 A g-1, respectively, accompanied by a high coulombic efficiency of ≈99%. The work highlights the promising conversion-type cathodes based on metal-halide perovskite materials.

Diagnostic value of water swallow test for dysphagia in patients with head and neck cancer: A systematic review and meta-analysis.

The diagnostic efficacy of the water swallow test (WST) is relatively robust for patients with neurogenic dysphagia; however, its diagnostic performance in identifying dysphagia among patients with HNC varies across studies. Our study aims to assess the diagnostic value of the WST for detecting dysphagia in patients with HNC. Systematic retrieval of studies on the use of WST for screening dysphagia in patients with HNC from databases up to August 1, 2023. Quality assessment of the included studies was performed using the Quality Assessment of Diagnostic Accuracy Studies-2 (QUADAS-2) tool. Calculate the pooled sensitivity, specificity, positive likelihood ratio (LR), negative LR, diagnostic odds ratio (DOR), and area under the receiver operating characteristic curve (AUC) to evaluate the screening ability of WST for dysphagia. A total of seven articles, encompassing eight study groups, were included, involving the analysis of 691 patients. The meta-analysis results demonstrate that the WST has a combined sensitivity, specificity, positive LR, negative LR, DOR, and AUC for diagnosing dysphagia in patients with HNC of 0.82 (95% CI [0.64, 0.92]), 0.79 (95% CI [0.70, 0.86]), 4.00 (95% CI [2.51, 6.36]), 0.22 (95% CI [0.10, 0.50]), 17.94 (95% CI [5.56, 57.92]), and 0.86 (95% CI [0.83, 0.89]), respectively. Significant heterogeneity was observed among the included studies. Meta-regression analysis showed that the pooled sensitivity of tumor sites and treatment was closely related, while the pooled specificity of treatment and version was closely related. The subgroup analysis showed that the WST's pooled sensitivity for diagnosing dysphagia in patients with nasopharyngeal cancer was 0.40 (95% CI [0.26, 0.56]), with an AUC of 0.50, lower than in other HNC sites. The WST performed better in surgical patients than in those undergoing radiotherapy (RT) or chemoradiotherapy (CRT), with lower sensitivity, specificity, and AUC values of 0.49 (95% CI [0.36, 0.61]), 0.66 (95% CI [0.59, 0.72]), and 0.64, respectively, for RT or CRT patients. The modified WST version showed different specificity values of 0.82 (95% CI [0.75, 0.87]), compared to the regular version of 0.68 (95% CI [0.61, 0.74]). Additionally, Deek's test indicated the absence of publication bias in this study (p = 0.32). The WST demonstrates favorable sensitivity and specificity in detecting dysphagia among patients with HNC. However, the diagnostic value may vary depending on factors such as tumor sites, treatment, and the specific version of the WST used.

Selenium-Anchored Chlorine Redox Chemistry in Aqueous Zinc Dual-Ion Batteries.

Chlorine-based batteries with Cl0 to Cl- redox reaction (ClRR) are promising for high-performance energystorage due to their high redox potential and large theoretical capacity. However, the inherent gas-liquid conversion feature of ClRR together with poor Cl fixation can cause Cl2 leakage, reducing battery reversibility. Herein, we utilize a Se-based organic molecule, diphenyl diselenide (di-Ph-Se), as the Cl anchoring agent and realize an atomic level-Cl fixation through chalcogen-halogencoordinating chemistry. The promoted Cl fixation, with two oxidized Cl0 anchoring on a single Ph-Se, and the multivalence conversion of Se contributeto a six-electron conversion process with up to 507 mAh g-1 and an average voltage of 1.51 V, as well as a high energy density of 665 Wh Kg-1 . Based on the superior reversibility of thedeveloped di-Ph-Se electrode with ClRR, a remarkable rate performance (205 mAh g-1 at 5 A g-1 ) and cycling performance (capacity retention of 77.3 % after 500cycles) are achieved. Significantly, the pouch cell delivers a record arealcapacity of up to 6.87 mAh cm-2 and extraordinary self-discharge performance. This chalcogen-halogen coordination chemistry between the Se electrode and Cl provides a new insight for developing reversible and efficientbatteries with halogen redox reactions.

Metal-Free Eutectic Electrolyte with Weak Hydrogen Bonds for High-Rate and Ultra-Stable Ammonium-Ion Batteries.

As the need for sustainable battery chemistry grows, non-metallic ammonium ion (NH4 + ) batteries are receiving considerable attention because of their unique properties, such as low cost, nontoxicity, and environmental sustainability. In this study, the solvation interactions between NH4 + and solvents are elucidated and design principles for NH4 + weakly solvated electrolytes are proposed. Given that hydrogen bond interactions dominate the solvation of NH4 + and solvents, the strength of the solvent's electrostatic potential directly determines the strength of its solvating power. As a proof of concept, succinonitrile with relatively weak electronegativity is selected to construct a metal-free eutectic electrolyte (MEE). As expected, this MEE is able to significantly broaden the electrochemical stability window and reduce the solvent binding energy in the solvation shell, which leads to a lower desolvation energy barrier and a fast charge transfer process. As a result, the as-constructed NH4 -ion batteries exhibit superior reversible rate capability (energy density of 65 Wh kg-1 total active mass at 600 W kg-1 ) and unprecedent long-term cycling performance (retention of 90.2% after 1000 cycles at 1.0 A g-1 ). The proposed methodology for constructing weakly hydrogen bonded electrolytes will provide guidelines for implementing high-rate and ultra-stable NH4 + -based energy storage systems.

[Research Progress of Indocyanine Green Fluorescence Laparoscopic Technique in Clinical Application].

Indocyanine green (ICG) is the most commonly used near-infrared fluorescent (NIRF) dye in clinical practice, and its mediated near-infrared fluorescence imaging technology is gradually applied in clinical practice. It has shown great potential in invasive surgery (MIS) and is expected to become the standard technology for surgical diagnosis and treatment of diseases. The clinical application of ICG fluorescence laparoscopy is reviewed here.

Synergistic coupling of interface ohmic contact and LSPR effects over Au/Bi24O31Br10 nanosheets for visible-light-driven photocatalytic CO2 reduction to CO.

The challenge of synergistically optimizing different mechanisms limits the further improvement of plasmon-mediated photocatalytic activities. In this work, an Au/Bi24O31Br10 composite, combining an interface ohmic contact and localized surface plasmon resonance (LSPR), is prepared by a thermal reduction method. The LSPR effect induces the local resonance energy transfer effect and the local electric field enhancement effect, while the interface ohmic contact forms a stronger interface electric field. The novel synergistic interaction between the interface ohmic contact and LSPR drives effective charge separation and provides more active sites for the adsorption and activation of CO2 with improved photocatalytic efficiency. The optimized 0.6 wt% Au (5.7 nm) over Bi24O31Br10 nanosheets showed an apparently improved photocatalytic activity without any sacrificial reagents, specifically CO and O2 yields of 44.92 and 17.83 µmol g-1 h-1, and demonstrated superior stability (only lost 6%) after continuous reaction for 48 h, nearly 5-fold enhanced compared to Bi24O31Br10 and a great advantage compared with other bismuth-based photocatalysts.

Enabling Electrochemical-Mechanical Robustness of Ultra-High Ni Cathode via Self-Supported Primary-Grain-Alignment Strategy.

The electrochemical-mechanical degradation of ultrahigh Ni cathode for lithium-ion batteries is a crucial aspect that limits the cycle life and safety of devices. Herein, the study reports a facile strategy involving rational design of primary grain crystallographic orientation within polycrystalline cathode, which well enhanced its electro-mechanical strength and Li+ transfer kinetics. Ex situ and in situ experiments/simulations including cross-sectional particle electron backscatter diffraction (EBSD), single-particle micro-compression, thermogravimetric analysis combined with mass spectrometry (TGA-MS), and finite element modeling reveal that, the primary-grain-alignment strategy effectively mitigates the particle pulverization, lattice oxygen release thereby enhances battery cycle life and safety. Besides the preexisting doping and coating methodologies to improve the stability of Ni-rich cathode, the primary-grain-alignment strategy, with no foreign elements or heterophase layers, is unprecedently proposed here. The results shed new light on the study of electrochemical-mechanical strain alleviation for electrode materials.

High level of winter warming aggravates soil carbon, nitrogen loss and changes greenhouse gas emission characteristics in seasonal freeze-thaw farmland soil.

Changes in the soil environment caused by winter warming is affecting the carbon and nitrogen cycles of seasonal freeze-thaw farmland soil. A field experiment was conducted in a seasonal freeze-thaw farmland soil of northeast China to investigate the effects caused from different levels of warming (W1 + 1.77 °C, W2 + 0.69 °C and C + 0 °C) on soil carbon and nitrogen dynamics, microbial biomass and greenhouse gases fluxes. During the early and middle winter, the contents of all kinds of soil carbon and nitrogen (Ammonium, nitrate, total nitrogen, dissolved organic carbon, readily oxidizable organic carbon and soil organic carbon) tended to increase with the increase of warming level, while during the late winter, their contents under different temperature treatments roughly present trend of W2 ≥C > W1. Except for the late thawing period, warming increased the contents of soil microbial biomass carbon and nitrogen, during the late thawing period, with the increase of warming level, MBC and MBN decreased significantly. Warming would stimulate the release of greenhouse gases from soil. But due to the differences of soil environmental conditions in each period and soil nutrient dynamics under different treatments, which made the effects of different levels of warming on soil GHGs fluxes in different periods are different. Our study suggested that low-level warming improved the availability of soil carbon and nitrogen, increased the contents of microbial biomass and greenhouse gas emissions. However, although high-level winter warming showed a similar phenomenon in the early and middle winter to the low-level warming, during the late winter, high-level warming increased soil nutrients loss and broke the seasonal coupling relationship between crop nutrient acquisition and soil microbial nutrient supply, and even led to the adaptation of soil CO2 release to it. This is of great significance for exploring the carbon and nitrogen cycle mechanisms of global terrestrial ecosystem.

Integrated genome-wide differentiation and association analyses identify causal genes underlying breeding-selected grain quality traits in japonica rice.

Improving grain quality is a primary objective in contemporary rice breeding. Japanese modern rice breeding has developed two different types of rice, eating and sake-brewing rice, with different grain characteristics, indicating the selection of variant gene alleles during the breeding process. Given the critical importance of promptly and efficiently identifying genes selected in past breeding for future molecular breeding, we conducted genome scans for divergence, genome-wide association studies, and map-based cloning. Consequently, we successfully identified two genes, OsMnS and OsWOX9D, both contributing to rice grain traits. OsMnS encodes a mannan synthase that increases the white core frequency in the endosperm, a desirable trait for sake brewing but decreases the grain appearance quality. OsWOX9D encodes a grass-specific homeobox-containing transcription factor, which enhances grain width for better sake brewing. Furthermore, haplotype analysis revealed that their defective alleles were selected in East Asia, but not Europe, during modern improvement. In addition, our analyses indicate that a reduction in grain mannan content during African rice domestication may also be caused a defective OsMnS allele due to breeding selection. This study not only reveals the delicate balance between grain appearance quality and nutrition in rice but also provides a new strategy for isolating causal genes underlying complex traits, based on the concept of "breeding-assisted genomics" in plants.

Tellurium with Reversible Six-Electron Transfer Chemistry for High-Performance Zinc Batteries.

Chalcogens, especially tellurium (Te), as conversion-type cathodes possess promising prospects for zinc batteries (ZBs) with potential rich valence supply and high energy density. However, the conversion reaction of Te is normally restricted to the Te2-/Te0 redox with a low voltage plateau at ∼0.59 V (vs Zn2+/Zn) rather than the expected positive valence conversion of Te0 to Ten+, inhibiting the development of Te-based batteries toward high output voltage and energy density. Herein, the desired reversible Te2-/Te0/Te2+/Te4+ redox behavior with up to six-electron transfer was successfully activated by employing a highly concentrated Cl--containing electrolyte (Cl- as strong nucleophile) for the first time. Three flat discharge plateaus located at 1.24, 0.77, and 0.51 V, respectively, are attained with a total capacity of 802.7 mAh g-1. Furthermore, to improve the stability of Ten+ products and enhance the cycling stability, a modified ionic liquid (IL)-based electrolyte was fabricated, leading to a high-performance Zn∥Te battery with high areal capacity (7.13 mAh cm-2), high energy density (542 Wh kgTe-1 or 227 Wh Lcathdoe+anode-1), excellent cycling performance, and a low self-discharge rate based on 400 mAh-level pouch cell. The results enhance the understanding of tellurium chemistry in batteries, substantially promising a remarkable route for advanced ZBs.

Micro-CT analysis and mechanical properties of low dimensional CFR-PEEK specimens additively manufactured by material extrusion.

Material extrusion of thermoplastic polymers enables the realization of complex specific designs with high performance composites. The present study aims at evaluating the mechanical properties of carbon fiber-reinforced semi-crystalline thermoplastic polymer polyether ether ketone (CFR-PEEK) manufactured by material extrusion and correlating them with results obtained by micro-CT. Samples in the shape of small bars were provided by Kumovis (Munich, Germany). The determination of surface roughness and density was followed by three-point bending tests. To reveal the pore distribution as well as the fusion quality of CFR PEEK when applied with external forces, micro-CT scans were performed with an X-ray microscope before and after the mechanical test to localize the sites where the fracture is generated. The density of CFR-PEEK bars indicated that they had superior mechanical properties compared with our previous study on unfilled 3D printed PEEK (bending modulus: (5.4 ± 0.5) GPa vs. (1.05 ± 0.05) GPa to (1.48 ± 0.10) GPa; bending strength: (167 ± 11) MPa vs. (51 ± 15) to (193 ± 7) MPa). Micro-CT analyses revealed the local 3D-distribution of voids. Voids of 30 µm diameter are nearly spherical and make up the main part of the total porosity. The larger the voids, the more they deviate from a spherical shape. Significant lack-of-fusion voids are located between the deposited filaments. By growing and merging, they act as seeds for the forming fracture line in the region of the flexural specimens where the maximum local tensile stresses occurred under bending load. Our work provides a detailed analysis of printed PEEK with fiber additive and relates this with mechanical properties.

Completely Activated and Phase-Transformed KFeMnHCF for Zn/K Hybrid Batteries with 14 500 Cycles by an OH-Rich Hydrogel Electrolyte.

Metal hexacyanoferrates are recognized as superior cathode materials for zinc and zinc hybrid batteries, particularly the Prussian blue analog (PBA). However, PBA development is hindered by several limitations, including small capacities (<70 mAh g-1 ) and short lifespans (<1000 cycles). These limitations generally arise due to incomplete activation of redox sites and structure collapse during intercalation/deintercalation of metal ions in PBAs. According to this study, the adoption of a hydroxyl-rich (OH-rich) hydrogel electrolyte with extended electrochemical stability windows (ESWs) can effectively activate the redox site of low-spin Fe of the Kx Fey Mn1-y [Fe(CN)6 ]w ·zH2 O (KFeMnHCF) cathode while tuning its structure. Additionally, the strong adhesion of the hydrogel electrolyte inhibits KFeMnHCF particles from falling off the cathode and dissolving. The easy desolvation of metal ions in the developed OH-rich hydrogel electrolytes can lead to a fast and reversible intercalation/deintercalation of metal ions in the PBA cathode. As a result, the Zn||KFeMnHCF hybrid batteries achieve the unprecedented characteristics of 14 500 cycles, a 1.7 V discharge plateau, and a 100 mAh g-1 discharge capacity. The results of this study provide a new understanding of the development of zinc hybrid batteries with PBA cathode materials and present a promising new electrolyte material for this application.

Predicting blood pressure from face videos using face diagnosis theory and deep neural networks technique.

Hypertension is a major cause of cardiovascular diseases. Accurate and convenient measurement of blood pressure are necessary for the detection, treatment, and control of hypertension. In recent years, face video based non-contact blood pressure prediction is a promising research topic. Interestingly, face diagnosis has been an important part of traditional Chinese medicine (TCM) for thousands of years. TCM practitioners observe some typical regions of the face to determine the health status of the Zang Fu organs (i.e., heart). However, the effectiveness of face diagnosis theory in conjunction with computer vision analysis techniques to predict blood pressure is unclear. We proposed an artificial intelligence framework for predicting blood pressure using deep convolutional neural networks in this study. First, we extracted pulse wave signals through 652 facial videos. Then, we trained and compared nine artificial neural networks and chose the best performed prediction model, with an overall true predict rate of 90%. We also investigated the impact of face reflex regions selection on blood pressure prediction model, and the five face regions outperformed. Our high effectiveness and stability framework may provide an objective and convenient computer-aided blood pressure prediction method for hypertension screening and disease prevention.

CoP-modified CdS for enhanced stability and photocatalytic hydrogen production under visible light.

The weak electron-hole separation ability and the more severe photocorrosion of CdS largely limit its hydrogen precipitation performance. In this study, CoP loading on the surface of CdS was utilized to form a type I heterojunction. The photocurrent density increased from 2 µA cm-2 to 20 µA cm-2. When the loading of CoP was 10%, the best photocatalytic performance reached 4.43 mmolg-1 h-1 under visible light, which was 20.1 times higher than that of CdS (0.22 mmolg-1 h-1). In addition, the loading of CoP solved the problem of CdS photocorrosion. After 5 cycles of simulated solar irradiation, the performance of 10% CoP/CdS remained at 93% of the initial test. This work provides new ideas for the design of low photocorrosion and high-performance catalysts.

Osteocytes autophagy mediated by mTORC2 activation controls osteoblasts differentiation and osteoclasts activities under mechanical loading.

Autophagy is an important mechanosensitive response for cellular homeostasis and survival in osteocytes. However, the mechanism and its effect on bone metabolism have not yet clarified. The objective of this study was to evaluate how compressive cyclic force (CCF) induced autophagic response in osteocytes and to determine the effect of mechanically induced-autophagy on bone cells including osteocytes, osteoblasts, and osteoclasts. Autophagic puncta observed in MLO-Y4 cells increased after exposure to CCF. The upregulated levels of the LC3-II isoform and the degradation of p62 further confirmed the increased autophagic flux. Additionally, ATP synthesis and release, osteocalcin (OCN) expression, and cell survival increased in osteocytes as well. The Murine osteoblasts MC3T3-E1 cells and RAW 264.7 macrophage cells were cultured in conditioned medium collected from MLO-Y4 cells subjected to CCF. The concentration of FGF23 increased and the concentrations of SOST and M-CSF and RANKL/OPG ratio decreased significantly in the conditioned medium. Moreover, the promotion of osteogenic differentiation in MC3T3-E1 cells and inhibition of osteoclastogenesis and function in RAW 264.7 cells were significantly attenuated when osteocytes autophagy was inhibited by siAtg7. Our findings suggested that CCF induced protective autophagy in osteocytes and subsequently enhanced osteocytes survival and osteoblasts differentiation and downregulated osteoclasts activities. Further study revealed that CCF induced autophagic response in osteocytes through mechanistic target of rapamycin complex 2 (mTORC2) activation. In conclusion, CCF-induced osteocytes autophagy upon mTORC2 activation promoted osteocytes survival and osteogenic response and decreased osteoclastic function. Thus, osteocytes autophagy will provide a promising target for better understanding of bone physiology and treatment of bone diseases.

Neuropeptide Y regulates osteocyte phenotype and function through AHNAK-Smad signalling.

Neuropeptide Y (NPY) is a widespread hormone in the central and peripheral nervous systems that maintains body homeostasis. Central actions of hypothalamic NPY have been identified in bone metabolism. Osteocytes are the main source of NPY in bone tissue, indicating that osteocytic NPY could be a local alternative pathway for hypothalamic mediated regulation of bone and bone cells. Here, we show that osteocytic NPY induces cell viability and proliferation. Osteocyte-derived factors are also closely associated with changes in cellular NPY mRNA levels. Furthermore, osteoblast mineralization was significantly induced by conditioned medium collected from NPY-overexpressing osteocytes (P < 0.05). Importantly, the NPY-AHNAK interaction was identified for the first time by co-immunoprecipitation, and significant inactivation of p-Smad1/5/9 was found in osteocytes with NPY or AHNAK insufficiency (P < 0.05). The activation of p-Smad1/5/9 reversed NPY insufficiency-caused decreases in the expression of osteocytic proliferating cell nuclear antigen and osteoblast markers including osteocalcin and Runx2 (P < 0.05); these findings showed an additional molecular mechanism by which NPY acts on cells through AHNAK-mediated Smad1/5/9 signalling. Collectively, our findings provide novel insights into the function of NPY in regulating osteocyte phenotype and function and provide new insights for further investigation into osteocytic NPY-mediated therapy.

Preoperative computed tomography-based tumoral radiomic features prediction for overall survival in resectable non-small cell lung cancer.

Objectives: The purpose of this study was to evaluate whether preoperative radiomics features could meliorate risk stratification for the overall survival (OS) of non-small cell lung cancer (NSCLC) patients. Methods: After rigorous screening, the 208 NSCLC patients without any pre-operative adjuvant therapy were eventually enrolled. We segmented the 3D volume of interest (VOI) based on malignant lesion of computed tomography (CT) imaging and extracted 1542 radiomics features. Interclass correlation coefficients (ICC) and LASSO Cox regression analysis were utilized to perform feature selection and radiomics model building. In the model evaluation phase, we carried out stratified analysis, receiver operating characteristic (ROC) curve, concordance index (C-index), and decision curve analysis (DCA). In addition, integrating the clinicopathological trait and radiomics score, we developed a nomogram to predict the OS at 1 year, 2 years, and 3 years, respectively. Results: Six radiomics features, including gradient_glcm_InverseVariance, logarithm_firstorder_Median, logarithm_firstorder_RobustMeanAbsoluteDeviation, square_gldm_LargeDependenceEmphasis, wavelet_HLL_firstorder_Kurtosis, and wavelet_LLL_firstorder_Maximum, were selected to construct the radiomics signature, whose areas under the curve (AUCs) for 3-year prediction reached 0.857 in the training set (n=146) and 0.871 in the testing set (n=62). The results of multivariate analysis revealed that the radiomics score, radiological sign, and N stage were independent prognostic factors in NSCLC. Moreover, compared with clinical factors and the separate radiomics model, the established nomogram exhibited a better performance in predicting 3-year OS. Conclusions: Our radiomics model may provide a promising non-invasive approach for preoperative risk stratification and personalized postoperative surveillance for resectable NSCLC patients.

[Design of Adjustable Liquid Simulated Eye for Spherical Power Detection of Eccentric Photographic Vision Screening Instrument].

A liquid simulated eye was designed to detect different spherical diopter indexes in the type inspection of medical equipment vision screening instrument. This liquid test simulation eye design is composed of three parts: lens, cavity and retina-imitation piston. By using the principle of geometric optics and the optical scattering effect of human retina, the relationship between the accommodation displacement of the designed adjustable liquid simulated eye and the spherical mirror power was calculated and analyzed. The designed liquid test simulated eye can be applied to vision screening instruments, computer refractometers and other optometry equipments based on photography principle in spherical lens measurement and so on.

Manipulating Coulombic Efficiency of Cathodes in Aqueous Zinc Batteries by Anion Chemistry.

Electrolyte environments, including cations, anions, and solvents are critical for the performance delivery of cathodes of batteries. Most works focused on interactions between cations and cathode materials, in contrast, there is a lack of in-depth research on the correlation between anions and cathodes. Here, we systematically investigated how anions manipulate the coulombic efficiency (CE) of cathodes of zinc batteries. We take intercalation-type V2 O5 and conversion-type I2 cathodes as typical cases for profound studies. It was found that electronic properties of anions, including charge density and its distribution, can tune conversion or intercalation reactions, leading to significant CE differences. Using operando visual Raman microscopy and theoretical simulations, we confirm that competitive coordination between anions and I- can regulate CEs by modulating polyiodide diffusion rates in Zn-I2 cells. In Zn-V2 O5 cells, anion-tuned solvation structures vastly affect CEs through varying Zn2+ intercalation kinetics. Conversion I2 cathode achieves a 99 % CE with highly electron-donating anions, while anions with preferable charge structures that interact strongly with Zn2+ afford an intercalation V2 O5 a nearly 100 % CE. Understanding the mechanism of anion-governed CEs will help us evaluate compatibility of electrolytes with electrodes, thus providing a guideline for anion selection and electrolyte design for high-energy, long-cycling zinc batteries.