Counting Electrons in Electrides.

The selection and design of charge integration methods remain an outstanding challenge in materials chemistry. In complex materials like electrides, this challenge is amplified by the small charge and complex shape of electride wave functions. For these reasons, popular integration methods, such as the Bader method, usually fail to assign any charge to the bare electrons in an electride. To address this challenge, we developed an algorithm that instead partitions the charge based on the electron localization function (ELF), a popular scheme for visualizing chemically important features in molecules and solids. The algorithm uses Bader segmentation of the ELF to find the electride electrons and Voronoi segmentation of the ELF to identify atoms. We apply this method, "BadELF", to the quantification of atomic radii and oxidation states in both ionic compounds and electrides. For ionic compounds, we find that the BadELF method yields radii that agree closely with Shannon crystal radii, while the oxidation states agree closely with the Bader method. When they are applied to electrides, however, only the BadELF algorithm yields chemically meaningful charges. We argue that the BadELF method provides a useful strategy to identify electrides and obtain new insight into their most essential property: the quantity of electrons within them.

Reconsidering Anode Materials for Fluoride-Ion Batteries-The Unexpected Roles of Carbide Formation.

Carbon is a ubiquitous additive to enhance the electrical conductivity of battery electrodes. Although carbon is generally assumed to be inert, the poor reversibility seen in some fluoride-ion battery electrodes has not been explained or systematically explored. Here, we utilize the Materials Project database to assess electrode deactivation reactions that result in the formation of a metal carbide. Specifically, we compare the theoretical potentials of MFy reduction to either the corresponding metal M or metal carbide MCx . We find that the formation of MCx is unlikely to be important in anodes that operate at modest reduction potentials, such as those made from electronegative metals like Zn, Sn, or Pb. However, in anodes that operate at extreme reduction potentials, such as alkaline earths or lanthanides, we find that formation of MCx is relevant and can emerge as a mechanism for capacity loss. Thus, side reactions of metals with carbon additives that form metal carbides possibly explain the poor reversibility of lanthanide or alkaline earth metal-based electrode materials. Finally, we highlight that the carbide formation process might be exploited for designing cheap anode systems with improved reversibility.

Assessing ternary materials for fluoride-ion batteries.

Although lithium-ion batteries have transformed energy storage, there is a need to develop battery technologies with improved performance. Fluoride-ion batteries (FIBs) may be promising alternatives in part due to their high theoretical energy density and natural elemental abundance. However, electrode materials for FIBs, particularly cathodes, have not been systematically evaluated, limiting rapid progress. Here, we evaluate ternary fluorides from the Materials Project crystal structure database to identify promising cathode materials for FIBs. Structures are further assessed based on stability and whether fluorination/defluorination occurs without unwanted disproportionation reactions. Properties are presented for pairs of fluorinated/defluorinated materials including theoretical energy densities, cost approximations, and bandgaps. We aim to supply a dataset for extracting property and structural trends of ternary fluoride materials that may aid in the discovery of next-generation battery materials.

Sc2C, a 2D Semiconducting Electride.

Electrides are exotic materials that typically have electrons present in well-defined lattice sites rather than within atoms. Although all known electrides have an electropositive metal cation adjacent to the electride site, the effect of cation electronegativity on the properties of electrides is not yet known. Here, we examine trivalent metal carbides with varying degrees of electronegativity and experimentally synthesize Sc2C. Our studies identify the material as a two-dimensional (2D) electride, even though Sc is more electronegative than any metal previously found adjacent to an electride site. Further, by exploring Sc2C and Al2C computationally, we find that higher electronegativity of the cation drives greater hybridization between metal and electride orbitals, which opens a band gap in these materials. Sc2C is the first 2D electride semiconductor, and we propose a design rule that cation electronegativity drives the change in its band structure.

Electrolyte-Free Spectroscopy and Imaging of Graphite Intercalation.

Engineering electrode materials for optoelectronic and energy storage applications requires a fundamental understanding of intercalation using spatially-resolved techniques. However, spectroscopic methods can have limited spatial resolution and low intensity since the signal passes through electrolyte. Here, a device geometry is presented in which the electrolyte is laterally separated from the area probed spectroscopically, so that the signal does not pass through the electrolyte. This geometry enables us to visualize ion transport with optical microscopy and monitor charge transfer with Raman and visible reflectance spectroscopies. In addition, vibrational changes are probed in the mid-IR, a region previously difficult to access due to electrolyte absorption. This geometry will allow many layered electrodes to be probed in situ using time- and spatially-resolved techniques, including photon and electron spectroscopies.

First-Principles Prediction of Electrochemical Electron-Anion Exchange: Ion Insertion without Redox.

It is widely assumed that the gain or loss of electrons in a material must be accompanied by its reduction or oxidation. Here, we report a system in which the insertion/deinsertion of an electron occurs without any reduction or oxidation. Using first-principles methods, we demonstrate this effect in the Y2CF2-[Y2C]2+(e-)2 material system, where (e-) indicates a lattice site containing a bare electron. We present a model in which Y2CF2 is in contact with a fluoride-containing electrolyte and the application of a positive voltage drives fluorination while a negative voltage reverses the process. We show that this chemistry does not change the oxidation states of the host lattice, causes no significant volume expansion, and occurs rapidly at room temperature. Finally, we demonstrate that this mechanism of ion insertion may enable a broad class of anion shuttle battery electrodes, some with gravimetric capacities nearly double those employed in intercalation-type Li-ion batteries.

Ratcheting quasi-ballistic electrons in silicon geometric diodes at room temperature.

Ratcheting effects play an important role in systems ranging from mechanical socket wrenches to biological motor proteins. The underlying principle is to convert a fluctuating, unbiased force into unidirectional motion. Here, we report the ratcheting of electrons at room temperature using a semiconductor nanowire with precisely engineered asymmetry. Modulation of the nanowire diameter creates a cylindrical sawtooth geometry with broken inversion symmetry on a nanometer-length scale. In a two-terminal device, this structure responded as a three-dimensional geometric diode that funnels electrons preferentially in one direction through specular reflection of quasi-ballistic electrons at the nanowire surface. The ratcheting effect causes charge rectification at frequencies exceeding 40 gigahertz, demonstrating the potential for applications such as high-speed data processing and long-wavelength energy harvesting.

Bonding in 2D Donor-Acceptor Heterostructures.

The ability to alter distances between atoms is among the most important tools in materials design. Despite this importance, controlling the interlayer distance in stacks of 2D materials remains a challenge. Here we show from first-principles that stacking electrenes-a new class of electron-donating 2D materials-with other 2D materials provides this control. The resulting donor-acceptor heterostructures have interlayer distances 1 Å less than van der Waals layered materials but 1 Å more than covalent or ionic bonds. This yields a class of quasi-bonds that exhibit characteristics of both ordinary chemical bonds and van der Waals interactions. We show how quasi-bonds have tunable polarities and strengths and that these bonds can be understood by drawing on familiar concepts from molecular orbital theory. We also demonstrate several useful properties of 2D donor-acceptor heterostructures, including superlubricity, ultralow work functions, and greatly improved voltages for lithium-ion batteries.

Intercalation of Layered Materials from Bulk to 2D.

Intercalation in few-layer (2D) materials is a rapidly growing area of research to develop next-generation energy-storage and optoelectronic devices, including batteries, sensors, transistors, and electrically tunable displays. Identifying fundamental differences between intercalation in bulk and 2D materials will play a key role in developing functional devices. Herein, advances in few-layer intercalation are addressed in the historical context of bulk intercalation. First, synthesis methods and structural properties are discussed, emphasizing electrochemical techniques, the mechanism of intercalation, and the formation of a solid-electrolyte interphase. To address fundamental differences between bulk and 2D materials, scaling relationships describe how intercalation kinetics, structure, and electronic and optical properties depend on material thickness and lateral dimension. Here, diffusion rates, pseudocapacity, limits of staging, and electronic structure are compared for bulk and 2D materials. Next, the optoelectronic properties are summarized, focusing on charge transfer, conductivity, and electronic structure. For energy devices, opportunities also emerge to design van der Waals heterostructures with high capacities and excellent cycling performance. Initial studies of heterostructured electrodes are compared to state-of-the-art battery materials. Finally, challenges and opportunities are presented for 2D materials in energy and optoelectronic applications, along with promising research directions in synthesis and characterization to engineer 2D materials for superior devices.

Control of Surface and Edge Oxidation on Phosphorene.

Phosphorene is emerging as an important two-dimensional semiconductor, but controlling the surface chemistry of phosphorene remains a significant challenge. Here, we show that controlled oxidation of phosphorene determines the composition and spatial distribution of the resulting oxide. We used X-ray photoemission spectroscopy to measure the binding energy shifts that accompany oxidation. We interpreted these spectra by calculating the binding energy shift for 24 likely bonding configurations, including phosphorus oxides and hydroxides located on the basal surface or edges of flakes. After brief exposure to high-purity oxygen or high-purity water vapor at room temperature, we observed phosphorus in the +1 and +2 oxidation states; longer exposures led to a large population of phosphorus in the +3 oxidation state. To provide insight into the spatial distribution of the oxide, transmission electron microscopy was performed at several stages during the oxidation. We found crucial differences between oxygen and water oxidants: while pure oxygen produced an oxide layer on the van der Waals surface, water oxidized the material at pre-existing defects such as edges or steps. We propose a mechanism based on the thermodynamics of electron transfer to interpret these observations. This work opens a route to functionalize the basal surface or edges of two-dimensional (2D) black phosphorus through site-selective chemical reactions and presents the opportunity to explore the synthesis of 2D phosphorene oxide by oxidation.

Experimental Demonstration of an Electride as a 2D Material.

Because of their loosely bound electrons, electrides offer physical properties useful in chemical synthesis and electronics. For these applications and others, nanosized electrides offer advantages, but to-date no electride has been synthesized as a nanomaterial. We demonstrate experimentally that Ca2N, a layered electride in which layers of atoms are separated by layers of a 2D electron gas (2DEG), can be exfoliated into two-dimensional (2D) nanosheets using liquid exfoliation. The 2D flakes are stable in a nitrogen atmosphere or in select organic solvents for at least one month. Electron microscopy and elemental analysis reveal that the 2D flakes retain the crystal structure and stoichiometry of the parent 3D Ca2N. In addition, the 2D flakes exhibit metallic character and an optical response that agrees with DFT calculations. Together these findings suggest that the 2DEG is preserved in the 2D material. With this work, we bring electrides into the nanoregime and experimentally demonstrate a 2D electride, Ca2N.

Chemoelectronic circuits based on metal nanoparticles.

To develop electronic devices with novel functionalities and applications, various non-silicon-based materials are currently being explored. Nanoparticles have unique characteristics due to their small size, which can impart functions that are distinct from those of their bulk counterparts. The use of semiconductor nanoparticles has already led to improvements in the efficiency of solar cells, the processability of transistors and the sensitivity of photodetectors, and the optical and catalytic properties of metal nanoparticles have led to similar advances in plasmonics and energy conversion. However, metals screen electric fields and this has, so far, prevented their use in the design of all-metal nanoparticle circuitry. Here, we show that simple electronic circuits can be made exclusively from metal nanoparticles functionalized with charged organic ligands. In these materials, electronic currents are controlled by the ionic gradients of mobile counterions surrounding the 'jammed' nanoparticles. The nanoparticle-based electronic elements of the circuitry can be interfaced with metal nanoparticles capable of sensing various environmental changes (humidity, gas, the presence of various cations), creating electronic devices in which metal nanoparticles sense, process and ultimately report chemical signals. Because the constituent nanoparticles combine electronic and chemical sensing functions, we term these systems 'chemoelectronic'. The circuits have switching times comparable to those of polymer electronics, selectively transduce parts-per-trillion chemical changes into electrical signals, perform logic operations, consume little power (on the scale of microwatts), and are mechanically flexible. They are also 'green', in the sense that they comprise non-toxic nanoparticles cast at room temperature from alcohol solutions.

Band Gap Engineering in a 2D Material for Solar-to-Chemical Energy Conversion.

The electronic structure of 2D semiconductors depends on their thickness, providing new opportunities to engineer semiconductors for energy conversion, electronics, and catalysis. Here we show how a 3D semiconductor, black phosphorus, becomes active for solar-to-chemical energy conversion when it is thinned to a 2D material. The increase in its band gap, from 0.3 eV (3D) to 2.1 eV (2D monolayer), is accompanied by a 40-fold enhancement in the formation of chemical products. Despite this enhancement, smaller flakes also have shorter excited state lifetimes. We deduce a mechanism in which recombination occurs at flake edges, while the "van der Waals" surface of black phosphorus bonds to chemical intermediates and facilitates electron transfer. The unique properties of black phosphorus highlight its potential as a customizable material for solar energy conversion and catalysis, while also allowing us to identify design rules for 2D photocatalysts that will enable further improvements in these materials.

Phosphorene: Synthesis, Scale-Up, and Quantitative Optical Spectroscopy.

Phosphorene, a two-dimensional (2D) monolayer of black phosphorus, has attracted considerable theoretical interest, although the experimental realization of monolayer, bilayer, and few-layer flakes has been a significant challenge. Here, we systematically survey conditions for liquid exfoliation to achieve the first large-scale production of monolayer, bilayer, and few-layer phosphorus, with exfoliation demonstrated at the 10 g scale. We describe a rapid approach for quantifying the thickness of 2D phosphorus and show that monolayer and few-layer flakes produced by our approach are crystalline and unoxidized, while air exposure leads to rapid oxidation and the production of acid. With large quantities of 2D phosphorus now available, we perform the first quantitative measurements of the material's absorption edge-which is nearly identical to the material's band gap under our experimental conditions-as a function of flake thickness. Our interpretation of the absorbance spectrum relies on an analytical method introduced in this work, allowing the accurate determination of the absorption edge in polydisperse samples of quantum-confined semiconductors. Using this method, we found that the band gap of black phosphorus increased from 0.33 ± 0.02 eV in bulk to 1.88 ± 0.24 eV in bilayers, a range that is larger than that of any other 2D material. In addition, we quantified a higher-energy optical transition (VB-1 to CB), which changes from 2.0 eV in bulk to 3.23 eV in bilayers. This work describes several methods for producing and analyzing 2D phosphorus while also yielding a class of 2D materials with unprecedented optoelectronic properties.

Tunneling Electrical Connection to the Interior of Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) are typically poor electrical conductors, which limits their uses in sensors, fuel cells, batteries, and other applications that require electrically conductive, high surface area materials. Although metal nanoclusters (NCs) are often added to MOFs, the electrical properties of these hybrid materials have not yet been explored. Here, we show that adding NCs to a MOF not only imparts moderate electrical conductivity to an otherwise insulating material but also renders it photoconductive, with conductivity increasing by up to 4 orders of magnitude upon light irradiation. Because charge transport occurs via tunneling between spatially separated NCs that occupy a small percent of the MOF's volume, the pores remain largely open and accessible. While these phenomena are more pronounced in single-MOF crystals (here, Rb-CD-MOFs), they are also observed in films of smaller MOF crystallites (MIL-53). Additionally, we show that in the photoconductive MOFs, the effective diffusion coefficients of electrons can match the typical values of small molecules diffusing through MOFs; this property can open new vistas for the development of MOF electrodes and, in a wider context, of electroactive and light-harvesting MOFs.

Storage of electrical information in metal-organic-framework memristors.

Single crystals of a cyclodextrin-based metal-organic framework (MOF) infused with an ionic electrolyte and flanked by silver electrodes act as memristors. They can be electrically switched between low and high conductivity states that persist even in the absence of an applied voltage. In this way, these small blocks of nanoporous sugar function as a non-volatile RRAM memory elements that can be repeatedly read, erased, and re-written. These properties derive from ionic current within the MOF and the deposition of nanometer-thin passivating layers at the anode flanking the MOF crystal. The observed phenomena are crucially dependent on the sub-nanometer widths of the channels in the MOF, allowing the passage of only smaller ions. Conversely, with the electrolyte present but no MOF, there are no memristance or memory effects.

Identifying champion nanostructures for solar water-splitting.

Charge transport in nanoparticle-based materials underlies many emerging energy-conversion technologies, yet assessing the impact of nanometre-scale structure on charge transport across micrometre-scale distances remains a challenge. Here we develop an approach for correlating the spatial distribution of crystalline and current-carrying domains in entire nanoparticle aggregates. We apply this approach to nanoparticle-based α-Fe2O3 electrodes that are of interest in solar-to-hydrogen energy conversion. In correlating structure and charge transport with nanometre resolution across micrometre-scale distances, we have identified the existence of champion nanoparticle aggregates that are most responsible for the high photoelectrochemical activity of the present electrodes. Indeed, when electrodes are fabricated with a high proportion of these champion nanostructures, the electrodes achieve the highest photocurrent of any metal oxide photoanode for photoelectrochemical water-splitting under 100 mW cm(-2) air mass 1.5 global sunlight.

Organic switches for surfaces and devices.

The pursuit to achieve miniaturization has tantalized researchers across the fields of chemistry, physics, biology, materials science and engineering for over half a century because of its many alluring potential applications. As alternatives to traditional "top-down" manufacturing, "bottom-up" approaches, originating from the (supra)molecular level, have enabled researchers to develop switches which can be manipulated on surfaces at nanoscale dimensions with deft precision using simple external triggers. Once on surfaces, these organic switches have been shown to modulate both the physical and chemical surface properties. In this Progress Report, we shed light on recent advances made in our laboratories towards integrated systems using all-organic switches on a variety of substrates. Design concepts are revealed, as well as the overall impact of all-organic switches on the properties of their substrates, while emphasizing the considerable promise and formidable challenges these advanced composite materials pose when it comes to conferring function on them.

Plasmoelectronics: coupling plasmonic excitation with electron flow.

Explorations of the coupling of light and charge via localized surface plasmons have led to the discovery that plasmonic excitation can influence macroscopic flows of charge and, conversely, that charging events can change the plasmonic excitation. We discuss recent theory and experiments in the emerging field of plasmoelectronics, with particular emphasis on the application of these materials to challenges in nanotechnology, energy use, and sensing.