Extended depth of focus by self-imaging wavefront division with the mirror tunnel.

The mirror tunnel is a component used to extend the depth of focus for compact imaging probes used in endoscopic optical coherence tomography (OCT). A fast and accurate method for mirror tunnel probe simulation, characterization, and optimization is needed, with the aim of reconciling wave- and ray-optics simulation methods and providing a thorough description of the physical operating principle of the mirror tunnel. BeamLab software, employing the beam propagation method, was used to explore the parameter space and quantify lateral resolution and depth of focus extension. The lateral resolution performance was found to depend heavily on the metric chosen, implying that care should be taken in the interpretation of optimization and simulation results. Interpreting the mirror tunnel exit face as an extended object gives an understanding of the probe operation, decoupling it from the focusing optics and potentially helping to reduce the parameter space for future optimization.

Advances in Imaging of Subbasal Corneal Nerves With Micro-Optical Coherence Tomography.

Purpose: To investigate the most peripheral corneal nerve plexus using high-resolution micro-optical coherence tomography (µOCT) imaging and to assess µOCT's clinical potential as a screening tool for corneal and systemic diseases. Methods: An experimental high-resolution (1.5 × 1.5 × 1 µm) µOCT setup was applied for three-dimensional imaging of the subbasal nerve plexus in nonhuman primates (NHPs) and swine within 3 hours postmortem. Morphologic features of subbasal nerves in µOCT were compared to ß3 tubulin-stained fluorescence confocal microscopy (FCM). Parameters such as nerve density, nerve distribution, and imaging repeatability were evaluated, using semiautomatic image analysis in form of a custom corneal surface segmentation algorithm and NeuronJ. Results: Swine and NHP corneas showed the species-specific nerve morphology in both imaging modalities. Most fibers showed a linear course, forming a highly parallel pattern, converging in a vortex with overall nerve densities varying between 9.51 and 24.24 mm/mm2. The repeatability of nerve density quantification of the µOCT scans as approximately 88% in multiple image recordings of the same cornea. Conclusions: Compared to the current gold standard of FCM, µOCT's larger field of view of currently 1 × 1 mm increases the conclusiveness of density measurements, which, coupled with µOCT's feature of not requiring direct contact, shows promise for future clinical application. The nerve density quantification may be relevant for screening for systemic disease (e.g., peripheral neuropathy). Translational Relevance: Technological advances in OCT technology may enable a quick assessment of corneal nerve density, which could be valuable evaluating ophthalmic and systemic peripheral innervation.

Dual-modality optical coherence tomography and fluorescence tethered capsule endomicroscopy.

OCT tethered capsule endomicroscopy (TCE) is an emerging noninvasive diagnostic imaging technology for gastrointestinal (GI) tract disorders. OCT measures tissue reflectivity that provides morphologic image contrast, and thus is incapable of ascertaining molecular information that can be useful for improving diagnostic accuracy. Here, we introduce an extension to OCT TCE that includes a fluorescence (FL) imaging channel for attaining complementary, co-registered molecular contrast. We present the development of an OCT-FL TCE capsule and a portable, plug-and-play OCT-FL imaging system. The technology is validated in phantom experiments and feasibility is demonstrated in a methylene blue (MB)-stained swine esophageal injury model, ex vivo and in vivo.

Modeling, optimization, and validation of an extended-depth-of-field optical coherence tomography probe based on a mirror tunnel.

The diagnostic capability of high-resolution optical coherence tomography (OCT) may be enhanced by using extended depth-of-field (EDOF) imaging that retains high transverse resolution over long depths. A recently developed mirror-tunnel optical probe design (single-mode fiber to multimode fiber to lens structure) that generates coaxially focused modes has been previously shown to enable EDOF for endoscopic OCT applications. Here, we present ray-tracing optical modeling of this optical configuration, which has the potential to guide performance improvement through optimization. The Huygens wave propagation of the field was traced through probe components with initial lengths. The irradiance along the x-z plane was analyzed, yielding an average full width at half-maximum (FWHM) of 9 µm over a 640 µm DOF (defined as the axial range over which the beam's transverse FWHM is maintained). A custom merit function was then defined, based on the focal region illumination intensity profile that yielded the maximum possible depth having a constrained FWHM size. An orthogonal gradient descent optimization algorithm was then applied using this merit function, using the multimode fiber, spacer, and lens lengths as variables. Optimization resulted in a modeled mean 6 µm FWHM spot diameter over an EDOF of 1 mm. Following optimization, a probe was fabricated, and was validated using a custom-built near-field scanning pinhole beam profiler. The experimental results (6 µm mean FWHM over 800 µm EDOF) showed reasonable correspondence to the simulated predictions, demonstrating the potential utility of optical modeling and optimization for improving EDOF performance in mirror-tunnel endoscopic OCT probes.

Corneal optical density in Fuchs endothelial dystrophy determined by anterior segment optical coherence tomography.

PURPOSE: In this study, we propose a method to grade corneal stromal opacity using optical density measurements by anterior segment optical coherence tomography (AS-OCT) and validate the approach in Fuchs endothelial corneal dystrophy (FECD). METHODS: A retrospective analysis of human corneal OCT scans was performed on 48 eyes of 32 patients with FECD and 33 control eyes of 21 patients using the Carl Zeiss Cirrus HD-OCT 5000. In addition, corneal edema in fresh rabbit cadaver eyes was artificially induced by distilled water and imaged with the Thorlabs TELESTO-II spectral domain OCT at different time points during saturation. The increase of opacity due to corneal edema was proposed to directly correlate with enhanced reflectivity sites in the OCT images, corresponding to higher optical density. The increase was determined as the image area above a statistically established gray-scale value using ImageJ and correlated with other disease characteristics. RESULTS: Optical densities in human corneas showed significant differences between FECD patients and the control group (p = 0.002). The increased optical densities determined in FECD corneas correlated well with other disease characteristics such as corneal pachymetry or visual acuity. Likewise, rabbit corneas showed a time dependent increase in thickness and in corneal optical density during soaking in distilled water. CONCLUSION: This study presents corneal optical density by AS-OCT as an objective value for corneal changes in FECD. Complementing other diagnostic tools in FECD the assessment of corneal optical density may identify progression of FECD, gauge novel therapeutic strategies and support risk and benefit analyses for corneal surgery.

Micro-optical coherence tomography for high-resolution morphologic imaging of cellular and nerval corneal micro-structures.

We demonstrate the highest resolution (1.5×1.5×1 µm) micrometer optical coherence tomography (µOCT) imaging of the morphologic micro-structure of excised swine and non-human primate corneas. Besides epithelial, stromal, and endothelial cell morphology, this report focuses on investigating the most peripheral corneal nerve fibers, the nerve fibers of the subbasal plexus (SBP). Alterations of SBP nerve density and composition are reportedly linked to major neurologic disorders, such as diabetic neuropathy, potentially indicating earliest onsets of denervation. Here, the fine, hyperreflective, epithelial nerve structures located just above Bowman's membrane, are i) visualized using our µOCT prototype, ii) validated by comparison to fluorescence confocal microscopy (including selective immunohistochemical staining), and iii) segmented using state-of-the-art image processing. Here, we also introduce polarization sensitive (PS) µOCT imaging, demonstrating, to the best of our knowledge, the highest resolution corneal PS-OCT scans reported to date.

Corneal Stromal Filler Injection as a Novel Approach to Correct Presbyopia-An Ex Vivo Pilot Study.

Purpose: To evaluate the ex vivo feasibility of corneal stromal filler injection to create bifocality to correct presbyopia by flattening the central posterior corneal surface and thus increase refractive power. Methods: Femtosecond laser-assisted corneal stromal pockets of varying diameters close to the posterior corneal curvature were cut into rabbit eyes ex vivo. Subsequently, hyaluronic acid was injected to flatten the central posterior curvature. Refractive parameters were determined using perioperatively acquired three-dimensional optical coherence tomography (OCT) scans. Using micrometer-resolution OCT, corneal endothelial cell morphology and density were evaluated. Results: Following filler injection into the corneal stromal pockets, a fair volume-dependent increase of central refractive power up to 4 diopters (dpt) was observed. Unremarkable refractive changes of the peripheral posterior (3 mm, 0.20 ± 0.11 dpt; 2 mm, 0.11 ± 0.10 dpt) and the anterior corneal curvature (3 mm, 0.20 ± 0.34 dpt; 2 mm, 0.33 ± 0.31 dpt) occurred. Only negligible changes in astigmatism were observed. Different sizes of optical zones could be established. Furthermore, no alterations of corneal endothelial morphology or endothelial cell density (2831 ± 356 cells/mm2 vs. 2734 ± 292 cells/mm2; P = 0.552) due to the adjacent laser treatment were observed. Conclusions: The ex vivo investigations proved the principle of injecting a filler material into femtosecond laser-created corneal stromal pockets close to the posterior corneal curvature as an efficacious, individually adjustable, and novel approach to correct presbyopia without ablating corneal tissue. Translational Relevance: Due to the aging population worldwide, presbyopia is an increasing problem; thus, our study may encourage further exploration to extend the treatment spectrum of clinically used femtosecond laser systems to correct presbyopia.

Stromal Nerve Imaging and Tracking Using Micro-Optical Coherence Tomography.

Purpose: To image, track and map the nerve fiber distribution in excised rabbit corneas over the entire stromal thickness using micro-optical coherence tomography (µOCT) to develop a screening tool for early peripheral neuropathy. Methods: Excised rabbit corneas were consecutively imaged by a custom-designed µOCT prototype and a commercial laser scanning fluorescence confocal microscope. The µOCT images with a field of view of approximately 1 × 1 mm were recorded with axial and transverse resolutions of approximately 1 µm and approximately 4 µm, respectively. In the volumetric µOCT image data, network maps of hyper-reflective, branched structures traversing different stromal compartments were segmented using semiautomatic image processing algorithms. Furthermore, the same corneas received ßIII-tubulin antibody immunostaining before digital confocal microscopy, and a comparison between µOCT image data and immunohistochemistry analysis was performed to validate the nerval origin of the tracked network structures. Results: Semiautomatic tracing of the nerves with a high range of different thicknesses was possible through the whole corneal volumes, creating a skeleton of the traced nerves. There was a good conformity between the hyper-reflective structures in the µOCT data and the stained nerval structures in the immunohistochemistry data. Conclusions: This article demonstrates nerval imaging and tracking as well as a spatial correlation between µOCT and a fluorescence corneal nerve standard for larger nerves throughout the full thickness of the cornea ex vivo. Translational Relevance: Owing to its advantageous properties, µOCT may become useful as a noncontact method for assessing nerval structures in humans to screen for early peripheral neuropathy.

Analysis of longitudinal sections of retinal vessels using Doppler OCT.

We present a new method for imaging retinal vessels that provides both structural and hemodynamic information. Our technique is based on a single beam OCT system with an integrated retinal tracker that enables recording of arbitrary scan patterns. We record longitudinal sections along the traces of retinal vessels. The tracker function enables the acquisition of multiple longitudinal sections along the same trace to provide high-quality averaged OCT scans as well as temporal changes of flow dynamics. The vessel walls are clearly identified as narrow, bright lines from which the vessel diameter can be retrieved as a function of position along the vessel. Furthermore, the Doppler angle can be obtained at each position along the vessel trace, enabling measurement of absolute blood flow by Doppler OCT analysis. The method is demonstrated in flow phantoms and in-vivo on retinal vessel bifurcations in healthy volunteers. In 7 of 9 imaged bifurcations, measured in- and outflow deviate by less than 11%, demonstrating the consistency of the method.

Signal averaging improves signal-to-noise in OCT images: But which approach works best, and when?

The high acquisition speed of state-of-the-art optical coherence tomography (OCT) enables massive signal-to-noise ratio (SNR) improvements by signal averaging. Here, we investigate the performance of two commonly used approaches for OCT signal averaging. We present the theoretical SNR performance of (a) computing the average of OCT magnitude data and (b) averaging the complex phasors, and substantiate our findings with simulations and experimentally acquired OCT data. We show that the achieved SNR performance strongly depends on both the SNR of the input signals and the number of averaged signals when the signal bias caused by the noise floor is not accounted for. Therefore we also explore the SNR for the two averaging approaches after correcting for the noise bias and, provided that the phases of the phasors are accurately aligned prior to averaging, then find that complex phasor averaging always leads to higher SNR than magnitude averaging.

Investigating spontaneous retinal venous pulsation using Doppler optical coherence tomography.

We demonstrate the advantages of optical coherence tomography (OCT) imaging for investigation of spontaneous retinal venous pulsation (SRVP). The pulsatile changes in venous vessel caliber are analyzed qualitatively and quantitatively using conventional intensity-based OCT as well as the functional extension Doppler OCT (DOCT). Single-channel and double-channel line scanning protocols of our multi-channel OCT prototype are employed to investigate venous pulsatile caliber oscillations as well as venous flow pulsatility in the eyes of healthy volunteers. A comparison to recordings of scanning laser ophthalmoscopy (SLO) - a standard en-face imaging modality for evaluation of SRVP - is provided, emphasizing the advantages of tomographic image acquisition. To the best of our knowledge, this is the first quantitative time-resolved investigation of SRVP and associated retinal perfusion characteristics using OCT.

Synthetic subaperture-based angle-independent Doppler flow measurements using single-beam line field optical coherence tomography in vivo.

We demonstrate a synthetic subaperture-based angle-independent Doppler flow calculation, using a line field spectral domain optical coherence tomography system. The high speed of the system features a high phase stability over the volume, which is necessary to apply synthetic subapertures in the aperture plane. Thus, the flow component for each subaperture can be reconstructed in postprocessing. Capillary phantom and in vivo retinal imaging experiments were performed to validate and demonstrate angle-independent Doppler flow calculation.

Mapping of Corneal Layer Thicknesses With Polarization-Sensitive Optical Coherence Tomography Using a Conical Scan Pattern.

Purpose: We demonstrate segmentation and mapping of corneal layers (epithelium, Bowman's layer, and stroma) across the entire cornea (limbus to limbus), using additional contrast provided by polarization-sensitive optical coherence tomography (PS-OCT) and analyze the reproducibility of the procedure. Methods: A custom built PS-OCT system operating at 1045 nm central wavelength with conical scanning was used for image acquisition. Conical scanning allows for almost perpendicular beam incidence on the corneal surface and provides good signal quality over the entire field of view. Epithelium, Bowman's layer, and stroma were segmented using the additional contrast provided by PS-OCT. Thickness maps were computed and analyzed in sectors. Both eyes of 20 healthy volunteers were imaged at least three times to test this method and to quantify reproducibility. Results: Thickness maps of the epithelium show significant (P < 0.001) superior thinning and an inferior thickening. Bowman's layer appears homogeneous within the central 7 to 8 mm diameter of the cornea and gets thinner toward the periphery until this layer disappears between 4 and 5.5 mm eccentricity from the center. Intersubject variations of the measured thicknesses of epithelium (coefficient of variation [CV] ∼8%), Bowman's layer (CV∼25%), and stroma (CV∼10%) were observed. Very good reproducibility of thickness measurements of epithelium (CV < 3%), Bowman's layer (CV < 5%), and stroma (CV < 2%) was found. Furthermore, a significant correlation (P < 0.001) between layer thicknesses of the right and left eyes of the same subject was found. Conclusions: PS-OCT with conical scanning is a feasible approach for determining thickness maps of corneal layers on a large field of view with high reproducibility.

Polarization-sensitive optical coherence tomography imaging of the anterior mouse eye.

Polarization-sensitive optical coherence tomography (PS-OCT) enables noninvasive, high-resolution imaging of tissue polarization properties. In the anterior segments of human eyes, PS-OCT allows the visualization of birefringent and depolarizing structures. We present the use of PS-OCT for imaging the murine anterior eye. Using a spectral domain PS-OCT setup operating in the 840-nm regime, we performed in vivo volumetric imaging in anesthetized C57BL/6 mice. The polarization properties of murine anterior eye structures largely replicated those known from human PS-OCT imagery, suggesting that the mouse eye may also serve as a model system under polarization contrast. However, dissimilarities were found in the depolarizing structure of the iris which, as we confirmed in postmortem histological sections, were caused by anatomical differences between both species. In addition to the imaging of tissues in the anterior chamber and the iridocorneal angle, we demonstrate longitudinal PS-OCT imaging of the murine anterior segment during mydriasis as well as birefringence imaging of corneal pathology in an aged mouse.

Beyond backscattering: optical neuroimaging by BRAD.

Optical coherence tomography (OCT) is a powerful technology for rapid volumetric imaging in biomedicine. The bright field imaging approach of conventional OCT systems is based on the detection of directly backscattered light, thereby waiving the wealth of information contained in the angular scattering distribution. Here we demonstrate that the unique features of few-mode fibers (FMF) enable simultaneous bright and dark field (BRAD) imaging for OCT. As backscattered light is picked up by the different modes of a FMF depending upon the angular scattering pattern, we obtain access to the directional scattering signatures of different tissues by decoupling illumination and detection paths. We exploit the distinct modal propagation properties of the FMF in concert with the long coherence lengths provided by modern wavelength-swept lasers to achieve multiplexing of the different modal responses into a combined OCT tomogram. We demonstrate BRAD sensing for distinguishing differently sized microparticles and showcase the performance of BRAD-OCT imaging with enhanced contrast for ex vivo tumorous tissue in glioblastoma and neuritic plaques in Alzheimer's disease.

Endoscopic optical coherence tomography with a flexible fiber bundle.

We demonstrate in vivo endoscopic optical coherence tomography (OCT) imaging in the forward direction using a flexible fiber bundle (FB). In comparison to current conventional forward-looking probe schemes, our approach simplifies the endoscope design by avoiding the integration of any beam steering components in the distal probe end due to two-dimensional scanning of a focused light beam over the proximal FB surface. We describe the challenges that arise when OCT imaging with an FB is performed, such as multimoding or cross coupling. The performance of different FBs varying in parameters, such as numerical aperture, core size, core structure, and flexibility, was consequently compared, and image quality degrading artifacts were described in detail. Based on our findings, we propose an optimal FB design for endoscopic OCT imaging.

Adaptable switching schemes for time-encoded multichannel optical coherence tomography.

We introduce the approach of variable time encoding for multichannel optical coherence tomography (OCT). High-speed fiber optical switches are applied for sequential sample arm switching to enable quasisimultaneous image acquisition from three different orientation angles. In comparison with previous multichannel OCT (using simultaneous sample illumination), time-encoded multichannel OCT has no need for division of illumination power among the respective channels to satisfy laser safety requirements. Especially for ophthalmic applications-in particular retinal imaging, which the presented prototype was developed for-this advantage strongly influences image quality through an enhanced sensitivity. Nevertheless, time encoding comes at the cost of a decrease in imaging speed due to sequential channel illumination. For the typical multichannel OCT modality Doppler OCT, this results in a reduction of the maximum unambiguously determinable Doppler velocity. However, we demonstrate that this drawback can be overcome by adaptation of the illumination channel switching scheme. Thus, a re-extension of the maximum unambiguously determinable Doppler frequency to the full A-scan rate of the tunable light source is presented. The performance of the technique is demonstrated by flow phantom experiments and measurements of retinal blood flow in the eyes of healthy human volunteers.

Compact akinetic swept source optical coherence tomography angiography at 1060 nm supporting a wide field of view and adaptive optics imaging modes of the posterior eye.

Imaging of the human retina with high resolution is an essential step towards improved diagnosis and treatment control. In this paper, we introduce a compact, clinically user-friendly instrument based on swept source optical coherence tomography (SS-OCT). A key feature of the system is the realization of two different operation modes. The first operation mode is similar to conventional OCT imaging and provides large field of view (FoV) images (up to 45° × 30°) of the human retina and choroid with standard resolution. The second operation mode enables it to optically zoom into regions of interest with high transverse resolution using adaptive optics (AO). The FoV of this second operation mode (AO-OCT mode) is 3.0° × 2.8° and enables the visualization of individual retinal cells such as cone photoreceptors or choriocapillaris. The OCT engine is based on an akinetic swept source at 1060 nm and provides an A-scan rate of 200 kHz. Structural as well as angiographic information can be retrieved from the retina and choroid in both operational modes. The capabilities of the prototype are demonstrated in healthy and diseased eyes.

Conical scan pattern for enhanced visualization of the human cornea using polarization-sensitive OCT.

Conventional imaging of the human cornea with optical coherence tomography (OCT) relies on telecentric scanning optics with sampling beams that are parallel to the optical axis of the eye. Because of the shape of the cornea, the beams have in some areas considerable inclination to the corneal surface which is accompanied by low signal intensities in these areas and thus an inhomogeneous appearance of corneal structures. In addition, alterations in the polarization state of the probing light depend on the angle between the imaging beam and the birefringent axis of the sample. Therefore, changes in the polarization state observed with polarization-sensitive (PS-) OCT originate mainly from the shape of the cornea. In order to minimize the effects of the corneal shape on intensity and polarization-sensitive based data, we developed a conical scanning optics design. This design provides imaging beams that are essentially orthogonal to the corneal surface. Thus, high signal intensity throughout the entire imaged volume is obtained and the influence of the corneal shape on polarization-sensitive data is greatly reduced. We demonstrate the benefit of the concept by comparing PS-OCT imaging results of the human cornea in healthy volunteers using both scanning schemes.

Design of a head phantom produced on a 3D rapid prototyping printer and comparison with a RANDO and 3M lucite head phantom in eye dosimetry applications.

An anthropomorphic head phantom including eye inserts allowing placement of TLDs 3 mm below the cornea has been produced on a 3D printer using a photo-cured acrylic resin to best allow tissue equivalence. Thus Hp(3) can be determined in radiological and interventional photon radiation fields. Eye doses and doses to the forehead have been compared to an Alderson RANDO head and a 3M Lucite skull phantom in terms of surface dose per incident air kerma for frontal irradiation since the commercial phantoms do not allow placement of TLDs 3 mm below the corneal surface. A comparison of dose reduction factors (DRFs) of a common lead glasses model has also been performed. Eye dose per incident air kerma were comparable between all three phantoms (printed phantom: 1.40, standard error (SE) 0.04; RANDO: 1.36, SE 0.03; 3M: 1.37, SE 0.03). Doses to the forehead were identical to eye surface doses for the printed phantom and the RANDO head (ratio 1.00 SE 0.04, and 0.99 SE 0.03, respectively). In the 3M Lucite skull phantom dose on the forehead was 15% lower than dose to the eyes attributable to phantom properties. DRF of a sport frame style leaded glasses model with 0.75 mm lead equivalence measured were 6.8 SE 0.5, 9.3 SE 0.4 and 10.5 SE 0.5 for the RANDO head, the printed phantom, and the 3M Lucite head phantom, respectively, for frontal irradiation. A comparison of doses measured in 3 mm depth and on the surface of the eyes in the printed phantom revealed no difference larger than standard errors from TLD dosimetry. 3D printing offers an interesting opportunity for phantom design with increasing potential as printers allowing combinations of tissue substitutes will become available. Variations between phantoms may provide a useful indication of uncertainty budgets when using phantom measurements to estimate individual personnel doses.