Physiologically relevant orthogonal assays for the discovery of small-molecule modulators of WIP1 phosphatase in high-throughput screens.

WT P53-Induced Phosphatase 1 (WIP1) is a member of the magnesium-dependent serine/threonine protein phosphatase (PPM) family and is induced by P53 in response to DNA damage. In several human cancers, the WIP1 protein is overexpressed, which is generally associated with a worse prognosis. Although WIP1 is an attractive therapeutic target, no potent, selective, and bioactive small-molecule modulator with favorable pharmacokinetics has been reported. Phosphatase enzymes are among the most challenging targets for small molecules because of the difficulty of achieving both modulator selectivity and bioavailability. Another major obstacle has been the availability of robust and physiologically relevant phosphatase assays that are suitable for high-throughput screening. Here, we describe orthogonal biochemical WIP1 activity assays that utilize phosphopeptides from native WIP1 substrates. We optimized an MS assay to quantify the enzymatically dephosphorylated peptide reaction product in a 384-well format. Additionally, a red-shifted fluorescence assay was optimized in a 1,536-well format to enable real-time WIP1 activity measurements through the detection of the orthogonal reaction product, Pi We validated these two optimized assays by quantitative high-throughput screening against the National Center for Advancing Translational Sciences (NCATS) Pharmaceutical Collection and used secondary assays to confirm and evaluate inhibitors identified in the primary screen. Five inhibitors were further tested with an orthogonal WIP1 activity assay and surface plasmon resonance binding studies. Our results validate the application of miniaturized physiologically relevant and orthogonal WIP1 activity assays to discover small-molecule modulators from high-throughput screens.

Endogenous single-strand DNA breaks at RNA polymerase II promoters in Saccharomyces cerevisiae.

Molecular combing and gel electrophoretic studies revealed endogenous nicks with free 3'OH ends at ∼100 kb intervals in the genomic DNA (gDNA) of unperturbed and G1-synchronized Saccharomyces cerevisiae cells. Analysis of the distribution of endogenous nicks by Nick ChIP-chip indicated that these breaks accumulated at active RNA polymerase II (RNAP II) promoters, reminiscent of the promoter-proximal transient DNA breaks of higher eukaryotes. Similar periodicity of endogenous nicks was found within the ribosomal rDNA cluster, involving every ∼10th of the tandemly repeated 9.1 kb units of identical sequence. Nicks were mapped by Southern blotting to a few narrow regions within the affected units. Three of them were overlapping the RNAP II promoters, while the ARS-containing IGS2 region was spared of nicks. By using a highly sensitive reverse-Southwestern blot method to map free DNA ends with 3'OH, nicks were shown to be distinct from other known rDNA breaks and linked to the regulation of rDNA silencing. Nicks in rDNA and the rest of the genome were typically found at the ends of combed DNA molecules, occasionally together with R-loops, comprising a major pool of vulnerable sites that are connected with transcriptional regulation.

Fluorescent single-stranded DNA-binding protein from Plasmodium falciparum as a biosensor for single-stranded DNA.

Single-stranded DNA (ssDNA) is a product of many cellular processes that involve double-stranded DNA, for example during DNA replication and repair, and is formed transiently in many others. Measurement of ssDNA formation is fundamental for understanding many such processes. The availability of a fluorescent biosensor for the determination of single-stranded DNA provides an important route to achieve this. Single-stranded DNA binding proteins (SSBs) protect ssDNA from degradation, but can be displaced to allow processing of the ssDNA. Their tight binding of ssDNA means that they are very good candidates for the development of a biosensor. Previously, the single stranded DNA binding protein from Escherichia coli, labeled with a fluorophore, (DCC-EcSSB) was developed and used for this purpose. However, the multiple binding modes of this protein meant that interpretation of DCC-EcSSB fluorescence was potentially complex in terms of determining the amount of ssDNA. Here, we present an improved biosensor, developed using the tetrameric SSB from Plasmodium falciparum as a new scaffold for fluorophore attachment. Each subunit of this tetrameric SSB was labeled with a diethylaminocoumarin fluorophore at a single site on its surface, such that there is a very large, 20-fold, fluorescence increase when it binds to ssDNA. This adduct can be used as a biosensor to report ssDNA formation. Because SSB from this organism has a single mode of binding ssDNA, namely 65-70 bases per tetramer, over a wide range of conditions, the fluorescent SSB allows simple quantitation of ssDNA. The binding is fast, possibly diffusion controlled, and tight (dissociation constant for DCC-PfSSB <5 pM). Its suitability for real-time assays of ssDNA formation was demonstrated by measurement of AddAB helicase activity, unwinding double-stranded DNA.

oriD structure controls RepD initiation during rolling-circle replication.

Bacterial antibiotic resistance is often carried by circular DNA plasmids that are copied separately from the genomic DNA and can be passed to other bacteria, spreading the resistance. The chloramphenicol-resistance plasmid pC221 from Staphylococcus aureus is duplicated by a process called asymmetric rolling circle replication. It is not fully understood how the replication process is regulated but its initiation requires a plasmid-encoded protein called RepD that nicks one strand of the parent plasmid at the double-stranded origin of replication (oriD). Using magnetic tweezers to control the DNA linking number we found RepD nicking occurred only when DNA was negatively supercoiled and that binding of a non-nicking mutant (RepDY188F) stabilized secondary structure formation at oriD. Quenched-flow experiments showed the inverted complementary repeat sequence, ICRII, within oriD was most important for rapid nicking of intact plasmids. Our results show that cruciform formation at oriD is an important control for initiation of plasmid replication.

Deconvoluting AMP-activated protein kinase (AMPK) adenine nucleotide binding and sensing.

AMP-activated protein kinase (AMPK) is a central cellular energy sensor that adapts metabolism and growth to the energy state of the cell. AMPK senses the ratio of adenine nucleotides (adenylate energy charge) by competitive binding of AMP, ADP, and ATP to three sites (CBS1, CBS3, and CBS4) in its γ-subunit. Because these three binding sites are functionally interconnected, it remains unclear how nucleotides bind to individual sites, which nucleotides occupy each site under physiological conditions, and how binding to one site affects binding to the other sites. Here, we comprehensively analyze nucleotide binding to wild-type and mutant AMPK protein complexes by quantitative competition assays and by hydrogen-deuterium exchange MS. We also demonstrate that NADPH, in addition to the known AMPK ligand NADH, directly and competitively binds AMPK at the AMP-sensing CBS3 site. Our findings reveal how AMP binding to one site affects the conformation and adenine nucleotide binding at the other two sites and establish CBS3, and not CBS1, as the high affinity exchangeable AMP/ADP/ATP-binding site. We further show that AMP binding at CBS4 increases AMP binding at CBS3 by 2 orders of magnitude and reverses the AMP/ATP preference of CBS3. Together, these results illustrate how the three CBS sites collaborate to enable highly sensitive detection of cellular energy states to maintain the tight ATP homeostastis required for cellular metabolism.

Development of a range of fluorescent reagentless biosensors for ATP, based on malonyl-coenzyme A synthetase.

The range of ATP concentrations that can be measured with a fluorescent reagentless biosensor for ATP has been increased by modulating its affinity for this analyte. The ATP biosensor is an adduct of two tetramethylrhodamines with MatB from Rhodopseudomonas palustris. Mutations were introduced into the binding site to modify ATP binding affinity, while aiming to maintain the concomitant fluorescence signal. Using this signal, the effect of mutations in different parts of the binding site was measured. This mutational analysis revealed three variants in particular, each with a single mutation in the phosphate-binding loop, which had potentially beneficial changes in ATP binding properties but preserving a fluorescence change of ~3-fold on ATP binding. Two variants (T167A and T303A) weakened the binding, changing the dissociation constant from the parent's 6 µM to 123 µM and 42 µM, respectively. Kinetic measurements showed that the effect of these mutations on affinity was by an increase in dissociation rate constants. These variants widen the range of ATP concentration that can be measured readily by this biosensor to >100 µM. In contrast, a third variant, S170A, decreased the dissociation constant of ATP to 3.8 µM and has a fluorescence change of 4.2 on binding ATP. This variant has increased selectivity for ATP over ADP of >200-fold. This had advantages over the parent by increasing sensitivity as well as increasing selectivity during ATP measurements in which ADP is present.

A Fluorescent, Reagentless Biosensor for ATP, Based on Malonyl-Coenzyme A Synthetase.

A fluorescent reagentless biosensor for ATP has been developed, based on malonyl-coenzyme A synthetase from Rhodopseudomonas palustris as the protein scaffold and recognition element. Two 5-iodoacetamidotetramethylrhodamines were covalently bound to this protein to provide the readout. This adduct couples ATP binding to a 3.7-fold increase in fluorescence intensity with excitation at 553 nm and emission at 575 nm. It measures ATP concentrations with micromolar sensitivity and is highly selective for ATP relative to ADP. Its ability to monitor enzymatic ATP production or depletion was demonstrated in steady-state kinetic assays in which ATP is a product or substrate, respectively.

Development of a Reagentless Biosensor for Inorganic Phosphate, Applicable over a Wide Concentration Range.

A fluorescent reagentless biosensor for inorganic phosphate (Pi), based on the E. coli PstS phosphate binding protein, was redesigned to allow measurements of higher Pi concentrations and at low, substoichiometric concentrations of biosensor. This was achieved by weakening Pi binding of the previous biosensor, and different approaches are described that could enable this change in properties. The readout, providing response to the Pi concentration, is delivered by tetramethylrhodamine fluorescence. In addition to two cysteine mutations for rhodamine labeling at positions 17 and 197, the final variant had an I76G mutation in the hinge region between the two lobes that make up the protein. Upon Pi binding, the lobes rotate on this hinge and the mutation on the hinge lowers affinity ∼200-fold, with a dissociation constant now in the tens to hundreds micromolar range, depending on solution conditions. The signal change on Pi binding was up to 9-fold, depending on pH. The suitability of the biosensor for steady-state ATPase assays was demonstrated with low biosensor usage and its advantage in ability to cope with Pi contamination.

A continuous enzyme-coupled assay for triphosphohydrolase activity of HIV-1 restriction factor SAMHD1.

The development of deoxynucleoside triphosphate (dNTP)-based drugs requires a quantitative understanding of any inhibition, activation, or hydrolysis by off-target cellular enzymes. SAMHD1 is a regulatory dNTP-triphosphohydrolase that inhibits HIV-1 replication in human myeloid cells. We describe here an enzyme-coupled assay for quantifying the activation, inhibition, and hydrolysis of dNTPs, nucleotide analogues, and nucleotide analogue inhibitors by triphosphohydrolase enzymes. The assay facilitates mechanistic studies of triphosphohydrolase enzymes and the quantification of off-target effects of nucleotide-based antiviral and chemotherapeutic agents.

Fluorescent biosensors: design and application to motor proteins.

Reagentless biosensors are single molecular species that report the concentration of a specific target analyte, while having minimal impact on the system being studied. This chapter reviews such biosensors with emphasis on the ones that use fluorescence as readout and can be used for real-time assays of concentration changes with reasonably high time resolution and sensitivity. Reagentless biosensors can be designed with different types of recognition elements, particularly specific binding proteins and nucleic acids, including aptamers. Different ways are described in which a fluorescence signal can be used to report the target concentration. These include the use of single, environmentally sensitive fluorophores; FRET pairs, often used in genetically encoded biosensors; and pairs of identical fluorophores that undergo reversible stacking interactions to change fluorescence intensity. The applications of these biosensors in different types of real-time assays with motor proteins are described together with some specific examples. These encompass regulation and mechanism of motor proteins, using both steady-state assays and single-turnover measurements.

Ligand-dependent dynamics of the active-site lid in bacterial dimethylarginine dimethylaminohydrolase.

The dimethylarginine dimethylaminohydrolase (DDAH) enzyme family has been the subject of substantial investigation as a potential therapeutic target for the regulation of vascular tension. DDAH enzymes catalyze the conversion of asymmetric N(η),N(η)-dimethylarginine (ADMA) to l-citrulline. Here the influence of substrate and product binding on the dynamic flexibility of DDAH from Pseudomonas aeruginosa (PaDDAH) has been assessed. A combination of heteronuclear NMR spectroscopy, static and time-resolved fluorescence measurements, and atomistic molecular dynamics simulations was employed. A monodisperse monomeric variant of the wild-type enzyme binds the reaction product l-citrulline with a low millimolar dissociation constant. A second variant, engineered to be catalytically inactive by substitution of the nucleophilic Cys249 residue with serine, can still convert the substrate ADMA to products very slowly. This PaDDAH variant also binds l-citrulline, but with a low micromolar dissociation constant. NMR and molecular dynamics simulations indicate that the active site "lid", formed by residues Gly17-Asp27, exhibits a high degree of internal motion on the picosecond-to-nanosecond time scale. This suggests that the lid is open in the apo state and allows substrate access to the active site that is otherwise buried. l-Citrulline binding to both protein variants is accompanied by an ordering of the lid. Modification of PaDDAH with a coumarin fluorescence reporter allowed measurement of the kinetic mechanism of the PaDDAH reaction. A combination of NMR and kinetic data shows that the catalytic turnover of the enzyme is not limited by release of the l-citrulline product. The potential to develop the coumarin-PaDDAH adduct as an l-citrulline sensor is discussed.

ATPase mechanism of the 5'-3' DNA helicase, RecD2: evidence for a pre-hydrolysis conformation change.

The superfamily 1 helicase, RecD2, is a monomeric, bacterial enzyme with a role in DNA repair, but with 5'-3' activity unlike most enzymes from this superfamily. Rate constants were determined for steps within the ATPase cycle of RecD2 in the presence of ssDNA. The fluorescent ATP analog, mantATP (2'(3')-O-(N-methylanthraniloyl)ATP), was used throughout to provide a complete set of rate constants and determine the mechanism of the cycle for a single nucleotide species. Fluorescence stopped-flow measurements were used to determine rate constants for adenosine nucleotide binding and release, quenched-flow measurements were used for the hydrolytic cleavage step, and the fluorescent phosphate biosensor was used for phosphate release kinetics. Some rate constants could also be measured using the natural substrate, ATP, and these suggested a similar mechanism to that obtained with mantATP. The data show that a rearrangement linked to Mg(2+) coordination, which occurs before the hydrolysis step, is rate-limiting in the cycle and that this step is greatly accelerated by bound DNA. This is also shown here for the PcrA 3'-5' helicase and so may be a general mechanism governing superfamily 1 helicases. The mechanism accounts for the tight coupling between translocation and ATPase activity.

Monomeric PcrA helicase processively unwinds plasmid lengths of DNA in the presence of the initiator protein RepD.

The helicase PcrA unwinds DNA during asymmetric replication of plasmids, acting with an initiator protein, in our case RepD. Detailed kinetics of PcrA activity were measured using bulk solution and a single-molecule imaging technique to investigate the oligomeric state of the active helicase complex, its processivity and the mechanism of unwinding. By tethering either DNA or PcrA to a microscope coverslip surface, unwinding of both linear and natural circular plasmid DNA by PcrA/RepD was followed in real-time using total internal reflection fluorescence microscopy. Visualization was achieved using a fluorescent single-stranded DNA-binding protein. The single-molecule data show that PcrA, in combination with RepD, can unwind plasmid lengths of DNA in a single run, and that PcrA is active as a monomer. Although the average rate of unwinding was similar in single-molecule and bulk solution assays, the single-molecule experiments revealed a wide distribution of unwinding speeds by different molecules. The average rate of unwinding was several-fold slower than the PcrA translocation rate on single-stranded DNA, suggesting that DNA unwinding may proceed via a partially passive mechanism. However, the fastest dsDNA unwinding rates measured in the single-molecule unwinding assays approached the PcrA translocation speed measured on ssDNA.

Structural prediction of a rhodamine-based biosensor and comparison with biophysical data.

The predicted structure has been calculated for a protein-based biosensor for inorganic phosphate (Pi), previously developed by some of us (Okoh et al., Biochemistry, 2006, 45, 14764). This is the phosphate binding protein from Escherichia coli labelled with two rhodamine fluorophores. Classical molecular dynamics and hybrid Car-Parrinello/molecular mechanics simulations allow us to provide molecular models of the biosensor both in the presence and in the absence of Pi. In the latter case, the rhodamine fluorophores maintain a stacked conformation in a 'face A to face B' orientation, which is different from the 'face A to face A' stacked orientation of free fluorophores in aqueous solution (Ilich et al., Spectrochim. Acta, Part A, 1996, 52, 1323). A protein conformation change upon binding Pi prevents significant stacking of the two rhodamines. In both states, the rhodamine fluorophores form hydrophobic contact with LEU291, without establishing significant hydrogen bonds with the protein. The accuracy of the models is established by a comparison between calculated and experimental absorption and circular dichroism spectra.

Transient kinetics of aminoglycoside phosphotransferase(3')-IIIa reveals a potential drug target in the antibiotic resistance mechanism.

Aminoglycoside phosphotransferases are bacterial enzymes responsible for the inactivation of aminoglycoside antibiotics by O-phosphorylation. It is important to understand the mechanism of enzymes in order to find efficient drugs. Using rapid-mixing methods, we studied the transient kinetics of aminoglycoside phosphotransferase(3')-IIIa. We show that an ADP-enzyme complex is the main steady state intermediate. This intermediate interacts strongly with kanamycin A to form an abortive complex that traps the enzyme in an inactive state. A good strategy to prevent the inactivation of aminoglycosides would be to develop uncompetitive inhibitors that interact with this key ADP-enzyme complex.

Fluorescent SSB as a reagentless biosensor for single-stranded DNA.

Helicases are an important and much studied group of enzymes that generally couple ATP hydrolysis to the separation of strands of base-paired nucleic acids. Studying their biochemistry at different levels of organization requires assays that measure the progress of the reaction in different ways. One such method makes use of the single-stranded DNA-binding protein (SSB) from Escherichia coli. This is used as a protein framework to produce a "reagentless biosensor," making use of its tight and specific binding of single-stranded DNA. The attachment of a fluorophore to this protein produces a signal in response to that binding. Thus the (G26C)SSB, labeled with a diethylaminocoumarin, gives a ~5-fold fluorescence increase on binding to single-stranded DNA and this can be used to assay the progress of helicase action along double-stranded DNA. A protocol for this is described along with a variant that can be used to follow the unwinding on a single molecule scale.

ATPase cycle and DNA unwinding kinetics of RecG helicase.

The superfamily 2 bacterial helicase, RecG, is a monomeric enzyme with a role in DNA repair by reversing stalled replication forks. The helicase must act specifically and rapidly to prevent replication fork collapse. We have shown that RecG binds tightly and rapidly to four-strand oligonucleotide junctions, which mimic a stalled replication fork. The helicase unwinds such DNA junctions with a step-size of approximately four bases per ATP hydrolyzed. To gain an insight into this mechanism, we used fluorescent stopped-flow and quenched-flow to measure individual steps within the ATPase cycle of RecG, when bound to a DNA junction. The fluorescent ATP analogue, mantATP, was used throughout to determine the rate limiting steps, effects due to DNA and the main states in the cycle. Measurements, when possible, were also performed with unlabeled ATP to confirm the mechanism. The data show that the chemical step of hydrolysis is the rate limiting step in the cycle and that this step is greatly accelerated by bound DNA. The ADP release rate is similar to the cleavage rate, so that bound ATP and ADP would be the main states during the ATP cycle. Evidence is provided that the main structural rearrangements, which bring about DNA unwinding, are linked to these states.

Kinetic mechanism of initiation by RepD as a part of asymmetric, rolling circle plasmid unwinding.

Some bacterial plasmids carry antibiotic resistance genes and replicate by an asymmetric, rolling circle mechanism, in which replication of the two strands is not concurrent. Initiation of this replication occurs via an initiator protein that nicks one DNA strand at the double-stranded origin of replication. In this work, RepD protein from the staphylococcal plasmid pC221 carries this function and allows PcrA helicase to bind and begin unwinding the plasmid DNA. This work uses whole plasmid constructs as well as oligonucleotide-based mimics of parts of the origin to examine the initiation reaction. It investigates the phenomenon that nicking, although required to open a single-stranded region at the origin and so allow PcrA to bind, is not required for another function of RepD, namely to increase the processivity of PcrA, allowing it to unwind plasmid lengths of DNA. A kinetic mechanism of RepD initiation is presented, showing rapid binding of the origin DNA. The rate of nicking varies with the structure of the DNA but can occur with a rate constant of >25 s(-1) at 30 °C. The equilibrium constant of the nicking reaction, which involves a transesterification to form a phosphotyrosine bond within the RepD active site, is close to unity.

Millisecond-scale biochemical response to change in strain.

Muscle fiber contraction involves the cyclical interaction of myosin cross-bridges with actin filaments, linked to hydrolysis of ATP that provides the required energy. We show here the relationship between cross-bridge states, force generation, and Pi release during ramp stretches of active mammalian skeletal muscle fibers at 20°C. The results show that force and Pi release respond quickly to the application of stretch: force rises rapidly, whereas the rate of Pi release decreases abruptly and remains low for the duration of the stretch. These measurements show that biochemical change on the millisecond timescale accompanies the mechanical and structural responses in active muscle fibers. A cross-bridge model is used to simulate the effect of stretch on the distribution of actomyosin cross-bridges, force, and Pi release, with explicit inclusion of ATP, ADP, and Pi in the biochemical states and length-dependence of transitions. In the simulation, stretch causes rapid detachment and reattachment of cross-bridges without release of Pi or ATP hydrolysis.