RESUMEN
The use of Nitinol compression staples has increased in foot and ankle procedures due to their ease of delivery and ability to offer sustained, dynamic compression. Prior biomechanical studies have predominantly examined mechanical performance in healthy bone models without investigating the effect of unicortical versus bicortical fixation. The purpose of this study was to examine the effect of bone quality and staple leg depth on the biomechanical performance of Nitinol staples in a bicortical bone model. Two-legged Nitinol staples were implanted in bicortical sawbone of 2 densities. Two different leg depths were tested to simulate unicortical versus bicortical fixation. Interfacial compressive forces, interfacial compression area, torsional strength, and shear strength were measured for each group. The effect of leg depth was minimal compared to the effect of sawbone density on the mechanical performance of Nitinol staples. Interfacial compressive force and interfacial compression areas were greater in the low density bone model, while torsional strength and shear strength were greater in the normal density bone model. Nitinol staple's mechanical performance is highly dependent upon bone quality and less dependent on whether staple legs terminate in cancellous versus cortical bone. Low density bone allows for a higher compressive interfacial area to be imparted by the staple. Staples in normal density bone are able to resist torsion and shear deformation more readily than staples in low density bone. Bone density may have a greater effect on the Nitinol staple's stability and compressive capability in vivo as compared to unicortical versus bicortical leg fixation.
