Clinical evaluation of droplet digital pcr for suspected ascites infection in patients with liver cirrhosis.

BACKGROUND: Droplet digital PCR (ddPCR) is increasingly used in diagnosing clinical pathogens, but its effectiveness in cirrhosis patients with suspected ascites infection remains uncertain. METHODS: The diagnostic performance of ddPCR was assessed in 305 ascites samples, utilizing culture and clinical composite standards. The quantitative value and potential clinical impact of ddPCR were further analyzed in patients with spontaneous bacterial peritonitis. RESULTS: With culture standards, ddPCR demonstrated a sensitivity of 86.5% and specificity of 83.2% for bacterial or fungal detection. After adjustment of clinical composite criteria, specificity increased to 96.4%. Better diagnostic performance for all types of targeted pathogens, particularly fungi, was observed with ddPCR compared to culture, and more polymicrobial infections were detected (30.4% versus 5.7%, p < 0.001). Pathogen loads detected by ddPCR correlated with white blood cell count in ascites and blood, as well as polymorphonuclear cell (PMN) count in ascites, reflecting infection status rapidly. A positive clinical impact of 55.8% (43/77) was observed for ddPCR, which was more significant among patients with PMN count ≤ 250/mm3 in terms of medication adjustment and new diagnosis. ddPCR results for fungal detection were confirmed by clinical symptoms and other microbiological tests, which could guide antifungal therapy and reduce the risk of short-term mortality. CONCLUSIONS: ddPCR, with appropriate panel design, has advantages in pathogen detection and clinical management of ascites infection, especially for patients with fungal and polymicrobial infections. Patients with atypical spontaneous bacterial peritonitis benefited more from ddPCR.

Upgrading CO2 to sustainable aromatics via perovskite-mediated tandem catalysis.

The directional transformation of carbon dioxide (CO2) with renewable hydrogen into specific carbon-heavy products (C6+) of high value presents a sustainable route for net-zero chemical manufacture. However, it is still challenging to simultaneously achieve high activity and selectivity due to the unbalanced CO2 hydrogenation and C-C coupling rates on complementary active sites in a bifunctional catalyst, thus causing unexpected secondary reaction. Here we report LaFeO3 perovskite-mediated directional tandem conversion of CO2 towards heavy aromatics with high CO2 conversion (> 60%), exceptional aromatics selectivity among hydrocarbons (> 85%), and no obvious deactivation for 1000 hours. This is enabled by disentangling the CO2 hydrogenation domain from the C-C coupling domain in the tandem system for Iron-based catalyst. Unlike other active Fe oxides showing wide hydrocarbon product distribution due to carbide formation, LaFeO3 by design is endowed with superior resistance to carburization, therefore inhibiting uncontrolled C-C coupling on oxide and isolating aromatics formation in the zeolite. In-situ spectroscopic evidence and theoretical calculations reveal an oxygenate-rich surface chemistry of LaFeO3, that easily escape from the oxide surface for further precise C-C coupling inside zeolites, thus steering CO2-HCOOH/H2CO-Aromatics reaction pathway to enable a high yield of aromatics.

The catalytic triad of rice NARROW LEAF1 involves H234.

NARROW LEAF1 (NAL1) exerts a multifaceted influence on leaf morphology and crop yield. Recent crystal study proposed that histidine 233 (H233) is part of the catalytic triad. Here we report that unlike suggested previously, H234 instead of H233 is a component of the catalytic triad alongside residues D291 and S385 in NAL1. Remarkably, residue 233 unexpectedly plays a pivotal role in regulating NAL1's proteolytic activity. These findings establish a strong foundation for utilizing NAL1 in breeding programs aimed at improving crop yield.

A systematic analysis of ARM genes revealed that GhARM144 regulates the resistance against Verticillium dahliae via interaction with GhOSM34.

Proteins of the armadillo repeat gene family play important roles in plant pathogen response. Here, 169 armadillo (ARM) genes were identified in upland cotton (Gossypium hirsutum). Phylogenetic analysis grouped these into 11 subfamilies, with conserved protein structures within each subfamily. The results signify that the expansion of the gene family occurred via whole genome duplication and dispersed duplication. Expression profiling and network analysis suggest that GhARM144 may regulate cotton resistance to Verticillium dahliae. GhARM144 was upregulated in roots by V. dahliae infection or salicylic acid treatment. This upregulation indicates a negative regulatory role of GhARM144' in the cotton immune responses, potentially by manipulating salicylic acid biosynthesis. Protein interaction studies found that GhARM144 associates with an osmotin-like protein, GhOSM34, at the plasma membrane. Silencing GhOSM34 reduced the resistance to V. dahliae, suggesting it may play a positive regulatory role. The results demonstrate that GhARM144 modulates cotton immunity through interaction with GhOSM34 and salicylic acid signalling. Further study of these proteins may yield insights into disease resistance mechanisms in cotton and other plants.

Effects of Nd:YAG laser irradiation at different energy densities on dentin bond durability under simulated pulpal pressure.

OBJECTIVES: To evaluate the effects of Nd:YAG laser irradiation on the microstructures of dentin surfaces and the long-term bond strength of dentin under simulated pulpal pressure. MATERIALS AND METHODS: Under simulated pulp pressure, 30 freshly extracted caries-free third molars were cut into 2-mm-thick dentin samples and then divided into five groups: the control and laser groups (93.3 J/cm2; 124.4 J/cm2; 155.5 J/cm2; 186.6 J/cm2). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and Vickers hardness were used to analyze the surface morphology, composition, and mechanical properties of the dentin before and after laser irradiation. Another 80 caries-free third molars were removed and treated as described above, and the resin was bonded to the dentin surface with Single Bond Universal (SBU) adhesive in self-etch mode to make stick specimens. Microtensile bond strength (µTBS), confocal laser scanning microscopy (CLSM), and interfacial silver nanoleakage tests before and after 10,000 times thermocycling were then performed to analyze the bonding properties and interfacial durability of each group. RESULTS: SEM observations revealed that the surfaces of all laser group specimens were rough with open dentin tubules. Laser irradiation altered the surface composition of dentin while removing some collagen fibers but did not affect its surface hardness or crystallographic characteristics. Furthermore, laser irradiation with an energy density of 124.4 J/cm2 significantly promoted the immediate and aging bond strengths and reduced nanoleakage compared to those of the control group. CONCLUSIONS: Under simulated pulp pressure, Nd:YAG laser pretreatment altered the chemical composition of dentin and improved the immediate and long-term bond strength. CLINICAL RELEVANCE: This study investigated the optimal parameters for Nd:YAG laser pretreatment of dentin, which has potential as a clinical method to strengthen bonding.

Patient delay of patients with pulmonary tuberculosis in Yantai, China, 2013 to 2022: Analysis of a case series.

Patient delay increases the morbidity and mortality due to tuberculosis (TB). This study aimed to assess patient delay among patients with pulmonary tuberculosis in Yantai from 2013 to 2022, and to analyze factors related to patient delay. Data of patients with pulmonary tuberculosis in Yantai City from 2013 to 2022 were obtained from the Tuberculosis Management Information System of the Chinese Disease Prevention and Control System. Statistical analyses were performed using the SPSS.26.0 software. The trend in patient delay rate was tested using the chi-square trend test. Univariate analyses were performed using the chi-square test, and factors with statistically significant differences in the univariate analysis were included in the binary logistic regression analysis to identify the factors affecting patient delay. Patient delay was defined as an interval of more than 14 days between the onset of clinical symptoms and the patient first visit to a healthcare facility. From 2013 to 2022, the median delay time for patients with pulmonary tuberculosis in Yantai was 28 ±â€…52 days and the patient delay rate was 69.5%. There was an overall increasing trend in the rate of patient delay as the number of years increased. Univariate analyses revealed statistically significant differences in patient delay in terms of age, occupation, patient source, domicile, pathogenetic results, and the presence of comorbidities (all P < .05). The results of logistic regression analysis showed that the age was 20 to 39, 40 to 59, and ≥ 60 years (OR = 1.365, 95%CI: 1.156-1.612; OR = 1.978, 95%CI: 1.660-2.356; OR = 1.767, 95%CI: 1.480-2.110), occupation was domestic and un-employed (OR = 1.188, 95%CI: 1.071-1.317), domicile as mobile population (OR = 1.212, 95%CI: 1.099-1.337), and positive pathogenic results (OR = 1.242, 95%CI: 1.015-1.520) were risk factors for patient delay. Patient delays were serious among pulmonary tuberculosis patients in Yantai City, 2013 to 2022, and patient delay was related to factors such as age, occupation, domicile, patient source, and pathogenetic results.

Atomic Imaging of Multi-Dimensional Ruddlesden-Popper Interfaces in Lead-Halide Perovskites.

Ruddlesden-Popper (RP) interface with defined stacking structure will fundamentally influence the optoelectronic performances of lead-halide perovskite (LHP) materials and devices. However, it remains challenging to observe the atomic local structures in LHPs, especially for multi-dimensional RP interface hidden inside the nanocrystal. In this work, the advantages of two imaging modes in scanning transmission electron microscopy (STEM), including high-angle annular dark field (HAADF) and integrated differential phase contrast (iDPC) STEM, are successfully combined to study the bulk and local structures of inorganic and organic/inorganic hybrid LHP nanocrystals. Then, the multi-dimensional RP interfaces in these LHPs are atomically resolved with clear gap and blurred transition region, respectively. In particular, the complex interface by the RP stacking in 3D directions can be analyzed in 2D projected image. Finally, the phase transition, ion missing, and electronic structures related to this interface are investigated. These results provide real-space evidence for observing and analyzing atomic multi-dimensional RP interfaces, which may help to better understand the structure-property relation of LHPs, especially their complex local structures.

Research on the multidimensional brain remodeling mechanisms at the level of brain regions, circuits, and networks in patients with chronic lower back pain caused by lumbar disk herniation.

Introduction: Chronic lower back pain (cLBP), frequently attributed to lumbar disk herniation (LDH), imposes substantial limitations on daily activities. Despite its prevalence, the neural mechanisms underlying lower back pain remain incompletely elucidated. Functional magnetic resonance imaging (fMRI) emerges as a non-invasive modality extensively employed for investigating neuroplastic changes in neuroscience. In this study, task-based and resting-state fMRI methodologies are employed to probe the central mechanisms of lower back pain. Methods: The study included 71 chronic lower back pain patients (cLBP group) due to LDH and 80 age, gender, and education-matched healthy volunteers (HC group). The subjects are mainly middle-aged and elderly individuals. Visual Analog Scale (VAS), Oswestry Disability Index (ODI), and Japanese Orthopedic Association Scores (JOA) were recorded. Resting-state and task-based fMRI data were collected. Results/discussion: No significant differences were observed in age, gender, and education level between the two groups. In the cLBP group during task execution, there was diffuse and reduced activation observed in the primary motor cortex and supplementary motor area. Additionally, during resting states, notable changes were detected in brain regions, particularly in the frontal lobe, primary sensory area, primary motor cortex, precuneus, and caudate nucleus, accompanied by alterations in Amplitude of Low Frequency Fluctuation, Regional Homogeneity, Degree Centrality, and functional connectivity. These findings suggest that chronic lower back pain may entail reduced excitability in sensory-motor areas during tasks and heightened activity in the sensory-motor network during resting states, along with modified functional connectivity in various brain regions.

Sphingolipid-Induced Bone Regulation and Its Emerging Role in Dysfunction Due to Disease and Infection.

The human skeleton is a metabolically active system that is constantly regenerating via the tightly regulated and highly coordinated processes of bone resorption and formation. Emerging evidence reveals fascinating new insights into the role of sphingolipids, including sphingomyelin, sphingosine, ceramide, and sphingosine-1-phosphate, in bone homeostasis. Sphingolipids are a major class of highly bioactive lipids able to activate distinct protein targets including, lipases, phosphatases, and kinases, thereby conferring distinct cellular functions beyond energy metabolism. Lipids are known to contribute to the progression of chronic inflammation, and notably, an increase in bone marrow adiposity parallel to elevated bone loss is observed in most pathological bone conditions, including aging, rheumatoid arthritis, osteoarthritis, and osteomyelitis. Of the numerous classes of lipids that form, sphingolipids are considered among the most deleterious. This review highlights the important primary role of sphingolipids in bone homeostasis and how dysregulation of these bioactive metabolites appears central to many chronic bone-related diseases. Further, their contribution to the invasion, virulence, and colonization of both viral and bacterial host cell infections is also discussed. Many unmet clinical needs remain, and data to date suggest the future use of sphingolipid-targeted therapy to regulate bone dysfunction due to a variety of diseases or infection are highly promising. However, deciphering the biochemical and molecular mechanisms of this diverse and extremely complex sphingolipidome, both in terms of bone health and disease, is considered the next frontier in the field.

A Multifunctional Therapeutic Strategy Using P7C3 as A Countermeasure Against Bone Loss and Fragility in An Ovariectomized Rat Model of Postmenopausal Osteoporosis.

By 2060, an estimated one in four Americans will be elderly. Consequently, the prevalence of osteoporosis and fragility fractures will also increase. Presently, no available intervention definitively prevents or manages osteoporosis. This study explores whether Pool 7 Compound 3 (P7C3) reduces progressive bone loss and fragility following the onset of ovariectomy (OVX)-induced osteoporosis. Results confirm OVX-induced weakened, osteoporotic bone together with a significant gain in adipogenic body weight. Treatment with P7C3 significantly reduced osteoclastic activity, bone marrow adiposity, whole-body weight gain, and preserved bone area, architecture, and mechanical strength. Analyses reveal significantly upregulated platelet derived growth factor-BB and leukemia inhibitory factor, with downregulation of interleukin-1 R6, and receptor activator of nuclear factor kappa-B (RANK). Together, proteomic data suggest the targeting of several key regulators of inflammation, bone, and adipose turnover, via transforming growth factor-beta/SMAD, and Wingless-related integration site/be-catenin signaling pathways. To the best of the knowledge, this is first evidence of an intervention that drives against bone loss via RANK. Metatranscriptomic analyses of the gut microbiota show P7C3 increased Porphyromonadaceae bacterium, Candidatus Melainabacteria, and Ruminococcaceae bacterium abundance, potentially contributing to the favorable inflammatory, and adipo-osteogenic metabolic regulation observed. The results reveal an undiscovered, and multifunctional therapeutic strategy to prevent the pathological progression of OVX-induced bone loss.

A neoteric antibacterial ceria-silver nanozyme for abiotic surfaces.

Community-associated and hospital-acquired infections caused by bacteria continue to yield major global challenges to human health. Bacterial contamination on abiotic surfaces is largely spread via high-touch surfaces and contemporary standard disinfection practices show limited efficacy, resulting in unsatisfactory therapeutic outcomes. New strategies that offer non-specific and broad protection are urgently needed. Herein, we report our novel ceria-silver nanozyme engineered at a molar ratio of 5:1 and with a higher trivalent (Ce3+) surface fraction. Our results reveal potent levels of surface catalytic activity on both wet and dry surfaces, with rapid, and complete eradication of Pseudomonas aeruginosa, Staphylococcus aureus, and methicillin resistant S. aureus, in both planktonic and biofilm form. Preferential electrostatic adherence of anionic bacteria to the cationic nanozyme surface leads to a catastrophic loss in both aerobic and anaerobic respiration, DNA damage, osmodysregulation, and finally, programmed bacterial lysis. Our data reveal several unique mechanistic avenues of synergistic ceria-Ag efficacy. Ag potentially increases the presence of Ce3+ sites at the ceria-Ag interface, thereby facilitating the formation of harmful H2O2, followed by likely permeation across the cell wall. Further, a weakened Ag-induced Ce-O bond may drive electron transfer from the Ec band to O2, thereby further facilitating the selective reduction of O2 toward H2O2 formation. Ag destabilizes the surface adsorption of molecular H2O2, potentially leading to higher concentrations of free H2O2 adjacent to bacteria. To this end, our results show that H2O2 and/or NO/NO2-/NO3- are the key liberators of antibacterial activity, with a limited immediate role being offered by nanozyme-induced ROS including O2•- and OH•, and likely other light-activated radicals. A mini-pilot proof-of-concept study performed in a pediatric dental clinic setting confirms residual, and continual nanozyme antibacterial efficacy over a 28-day period. These findings open a new approach to alleviate infections caused by bacteria for use on high-touch hard surfaces.

Atomic Imaging of the Pb Precipitation in Lead-Halide Perovskites.

The lead iodide (PbI2 ) in lead-halide perovskite (LHP) is both a positive additive for material properties and a site for the formation of device defects. Therefore, atomic-level detection of PbI2 and its derived Pb structures are crucial for understanding the performance and stability of the LHP material. In this work, the atomic imaging of the LHP, PbI2 , and Pb lattices is achieved using low-dose integrated differential phase contrast (iDPC) scanning transmission electron microscopy (STEM). Combining it with the traditional high-angle annular dark field (HAADF)-STEM, the Pb precipitation in different LHPs (CsPbI3 , CsPbBr3, and FAPbI3 ) and under different conditions (light, air, and heat) can be investigated in real space. Then, the features of Pb precipitation (positions and sizes) are visually revealed under different conditions and the stabilities of different LHPs. Meanwhile, the pathway of Pb precipitation is directly imaged and confirmed by the iDPC-STEM during an in situ heating process, supporting the detailed mechanism of Pb precipitation. These results provide the visual evidence for analyzing atomic Pb precipitation in LHPs, which helps better understand the structure-property relation induced by Pb impurity.

Silver/Antimony-Base Multifunctional Double Perovskite with H/F Substitution Enhance Properties.

Two-dimensional double perovskites have experienced rapid development due to their outstanding optoelectronic properties and diverse structural characteristics. However, the synthesis of high-performance multifunctional compounds and the regulation of their properties still lack relevant examples. Herein, we synthesized two multifunctional compounds, (C6H14N)4AgSbBr8 (1) and (F2-C6H12N)4AgSbBr8 (2), which exhibit high solid-state phase transition temperature, bistable dielectric constant switching, second harmonic generation (SHG), and bright emission. Through H/F substitution, the transition temperature increases and achieves a smaller band gap attributed to reduced interlayer spacing. Furthermore, we investigated the broad emission mechanism of the compounds through first-principles calculation and variable-temperature fluorescence, confirming the presence of the STE1 emission. Our work provides insight into the further development of multifunctional compounds and chemical modification that enhances compound properties.

Ultrasmall single-layered NbSe2 nanotubes flattened within a chemical-driven self-pressurized carbon nanotube.

Pressure can alter interatomic distances and its electrostatic interactions, exerting a profound modifying effect on electron orbitals and bonding patterns. Conventional pressure engineering relies on compressions from external sources, which raises significant challenge in precisely applying pressure on individual molecules and also consume substantial mechanical energy. Here we report ultrasmall single-layered NbSe2 flat tubes (< 2.31 nm) created by self-pressurization during the deselenization of NbSe3 within carbon nanotubes (CNTs). As the internal force (4-17 GPa) is three orders of magnitude larger than the shear strength between CNTs, the flat tube is locked to prevent slippage. Electrical transport measurements indicate that the large pressure within CNTs induces enhanced intermolecular electron correlations. The strictly one-dimensional NbSe2 flat tubes harboring the Luttinger liquid (LL) state, showing a higher tunneling exponent [Formula: see text] than pure CNTs ([Formula: see text]). This work suggests a novel chemical approach to self-pressurization for generating new material configurations and modulating electron interactions.

Synthesis of 12-Connected Three-Dimensional Covalent Organic Framework with lnj Topology.

The structural exploration of three-dimensional covalent organic frameworks (3D COFs) is of great significance to the development of COF materials. Different from structurally diverse MOFs, which have a variety of connectivity (3-24), now the valency of 3D COFs is limited to only 4, 6, and 8. Therefore, the exploration of organic building blocks with higher connectivity is a necessary path to broaden the scope of 3D COF structures. Herein, for the first time, we have designed and synthesized a 12-connected triptycene-based precursor (triptycene-12-CHO) with 12 symmetrical distributions of aldehyde groups, which is also the highest valency reported until now. Based on this unique 12-connected structure, we have successfully prepared a novel 3D COF with lnj topology (termed 3D-lnj-COF). The as-synthesized 3D COF exhibits honeycomb main pores and permanent porosity with a Brunauer-Emmett-Teller surface area of 1159.6 m2 g-1. This work not only provides a strategy for synthesizing precursors with a high connectivity but also provides inspiration for enriching the variety of 3D COFs.

Characterization and gene expression analysis reveal universal stress proteins respond to abiotic stress in Gossypium hirsutum.

BACKGROUND: Universal stress proteins (USPs) are a class of stress-induced proteins that play a crucial role in biotic and abiotic stress responses. These proteins have previously been reported to participate directly in responses to various stress and protect plants against unfavorable environmental conditions. However, there is limited research on USPs in cotton, and systematic characterization of USPs in Gossypium species is lacking. RESULTS: In the present study, the USP genes in Gossypium hirsutum were systematically identified and classified into six distinct subfamilies. The expansion of USPs in Gossypium species is mainly caused by dispersed duplication and whole genome duplication. Notably, the USPs that have expanded through allotetraploidization events are highly conserved in the allotetraploid species. The promoter regions of GhUSPs contain a diverse range of cis-acting elements associated with stress response. The RNA-Seq analysis and RT-qPCR assays revealed a significant induction of numerous GhUSPs expressions in response to various abiotic stresses. The co-expression network of GhUSPs revealed their involvement in stress response. CONCLUSIONS: This study systematically analyzed the biological characteristics of GhUSPs and their response to abiotic stress. These findings serve as a theoretical basis for facilitating the breeding of cotton varieties in future research.

GhVOZ1-AVP1 module positively regulates salt tolerance in upland cotton (Gossypium hirsutum L.).

Vascular Plant One­zinc Finger (VOZ) transcription factor can respond to a variety of abiotic stresses, however its function in cotton and the molecular mechanisms of response to salt tolerance remained unclear. In this study, we found that GhVOZ1 is highly expressed in stamen and stem of cotton under normal conditions. The expression of GhVOZ1 increased significantly after 3 h of salt treatment in three-leaf staged upland cotton. Overexpressed transgenic lines of GhVOZ1 in Arabidopsis and upland cotton were treated with salt stress and we found that GhVOZ1 could respond positively to salt stress. GhVOZ1 can regulate Arabidopsis Vacuolar Proton Pump Pyrophosphatase (H+-PPase) gene (AVP1) expression through specific binding to GCGTCTAAAGTACGC site on GhAVP1 promoter, which was examined through Dual-luciferase assay and Electrophoretic mobility shift assay (EMSA). AVP1 expression was significantly increased in Arabidopsis with GhVOZ1 overexpression, while GhAVP1 expression was decreased in virus induced gene silenced (VIGS) cotton plants of GhVOZ1. Knockdown of GhAVP1 expression in cotton plants by VIGS showed decreased superoxide dismutase (SOD) and peroxidase (POD) activities, whereas an increased malondialdehyde (MDA) content and ultimately decreased salt tolerance. The GhVOZ1-AVP1 module could maintain sodium ion homeostasis through cell ion transport and positively regulate the salt tolerance in cotton, providing new ideas and insights for the study of salt tolerance.

Surface Chemistry of Biologically Active Reducible Oxide Nanozymes.

Reducible metal oxide nanozymes (rNZs) are a subject of intense recent interest due to their catalytic nature, ease of synthesis, and complex surface character. Such materials contain surface sites which facilitate enzyme-mimetic reactions via substrate coordination and redox cycling. Further, these surface reactive sites are shown to be highly sensitive to stresses within the nanomaterial lattice, the physicochemical environment, and to processing conditions occurring as part of their syntheses. When administered in vivo, a complex protein corona binds to the surface, redefining its biological identity and subsequent interactions within the biological system. Catalytic activities of rNZs each deliver a differing impact on protein corona formation, its composition, and in turn, their recognition, and internalization by host cells. Improving the understanding of the precise principles that dominate rNZ surface-biomolecule adsorption raises the question of whether designer rNZs can be engineered to prevent corona formation, or indeed to produce "custom" protein coronas applied either in vitro, and preadministration, or formed immediately upon their exposure to body fluids. Here, fundamental surface chemistry processes and their implications in rNZ material performance are considered. In particular, material structures which inform component adsorption from the application environment, including substrates for enzyme-mimetic reactions are discussed.

Cytoplasmic Escape of Mitochondrial DNA Mediated by Mfn2 Downregulation Promotes Microglial Activation via cGas-Sting Axis in Spinal Cord Injury.

Neuroinflammation is associated with poor outcomes in patients with spinal cord injury (SCI). Recent studies have demonstrated that stimulator of interferon genes (Sting) plays a key role in inflammatory diseases. However, the role of Sting in SCI remains unclear. In the present study, it is found that increased Sting expression is mainly derived from activated microglia after SCI. Interestingly, knockout of Sting in microglia can improve the recovery of neurological function after SCI. Microglial Sting knockout restrains the polarization of microglia toward the M1 phenotype and alleviates neuronal death. Furthermore, it is found that the downregulation of mitofusin 2 (Mfn2) expression in microglial cells leads to an imbalance in mitochondrial fusion and division, inducing the release of mitochondrial DNA (mtDNA), which mediates the activation of the cGas-Sting signaling pathway and aggravates inflammatory response damage after SCI. A biomimetic microglial nanoparticle strategy to deliver MASM7 (named MSNs-MASM7@MI) is established. In vitro, MSNs-MASM7@MI showed no biological toxicity and effectively delivered MASM7. In vivo, MSNs-MASM7@MI improves nerve function after SCI. The study provides evidence that cGas-Sting signaling senses Mfn2-dependent mtDNA release and that its activation may play a key role in SCI. These findings provide new perspectives and potential therapeutic targets for SCI treatment.

A historical review of hybrid rice breeding.

The development of germplasm resources and advances in breeding methods have led to steady increases in yield and quality of rice (Oryza sativa L.). Three milestones in the recent history of rice breeding have contributed to these increases: dwarf rice breeding, hybrid rice breeding, and super rice breeding. On the 50th anniversary of the success of three-line hybrid rice, we highlight important scientific discoveries in rice breeding that were made by Chinese scientists and summarize the broader history of the field. We discuss the strategies that could be used in the future to optimize rice breeding further in the hope that China will continue to play a leading role in international rice breeding.