[Effects of tillage types on soil aggregate distribution and stability in irrigated sierozem of Gansu Yellow River irrigation area, China]. / 耕作方式对甘肃引黄灌区灌耕灰钙土团聚体分布及稳定性的影响.

A total of six treatments, including continuous conventional tillage (CT), rotary tillage (RT), subsoiling (ST), no-tillage (NT), conventional-no tillage (CT-NT) and subsoiling-no tillage (ST-NT), were conducted to examine the effects of different tillage types on soil aggregates distribution and stability of irrigated sierozem on continuous 8-year-tillage maize fields in the Gansu Yellow River irrigated area in 2014-2017. The results showed that the aggregation and stability of large aggregates in 0-40 cm soil layer were increased by NT and ST-NT treatments, while the size distribution and stability in plough layer were significantly decreased by CT and RT treatments due to strong soil disturbance. Compared with RT, the mechanical stability of aggregates under dry sieving NT was the best. The contents of >0.25 mm aggregate (R0.25), mean weight diameter (MWD) and geometric mean diameter (GMD) increased by 5.8%, 8.0%, and 13.0%, respectively, and fractal dimension (D) decreased by 3.6%. The water-stable aggregates in ST-NT was the best, with R0.25, MWD and GMD increased by 55.3%, 15.1% and 8.7%, respectively, and D value decreased by 0.8%. The percentage of aggregate destruction (PAD) and unstable aggregate index (ELT) of NT and ST-NT treatments were the lowest. PAD was reduced by 5.9% and 7.7% compared with RT, ELT was reduced by 5.8% and 7.2%, respectively. All the results indicated that the subsoiling-notillage (ST-NT) rotation mode was more conducive to the enhancement of soil aggregate content and stability and consistent with the local farmers operating habits, which would be an ideal tillage method and had certain application value for the sustainable agricultural development in this area.

[Effects of subsoiling and straw returning on soil physical properties and maize production in Yellow River irrigation area of Gansu, China]. / 深松和秸秆还田对甘肃引黄灌区土壤物理性状和玉米生产的影响.

A field experiment was conducted to examine the effects of subsoiling 35 cm with maize straw returning, subsoiling 35 cm without maize straw returning, and rotary tillage without maize straw returning on soil compaction, soil bulk density, soil infiltration, soil water content in 0-100 cm depth, nutrients uptake and production of maize on sierozem in the Gansu Yellow River irrigated area in 2015-2017. Compared with subsoiling 35 cm without maize straw returning and rotary tillage without maize straw returning, subsoiling 35 cm with maize straw returning significantly decreased the soil compaction and soil density in 0-40 cm depth. Compared with that in 2015 (before experiment), soil compaction and soil bulk density in subsoiling 35 cm with straw returning was decreased by 42.6% and 7.0%, respectively, after harvest in 2017. Compared with other treatments, subsoiling 35 cm with straw returning had the lowest variation of soil compaction (6.1%) and soil bulk density (3.2%) in 0-40 cm depth before sowing and after harvest in 2016 and 2017. The soil infiltration rate in subsoiling 35 cm with straw returning was significantly improved by 33.6% compared with rotary tillage without maize straw returning. Subsoiling 35 cm with straw retention could significantly increase soil water content and decrease water variation in 0-100 cm soil depth in spring (before maize sowing) and autumn (after maize harvest). Compared with rotary tillage without maize straw returning, water storage in subsoiling 35 cm with straw retention was increased by 15.5% and 5.6% in spring and autumn, respectively. The water use efficiency was enhanced by 32.4%. Furthermore, subsoiling 35 cm with straw retention could increase maize economic yield and biomass yield by 25.6% and 33.3%, compared with rotary tillage without straw retention. Subsoilng and straw retention could promote nutrient absorption, with N, P2O5 and K2O uptake increased by 49.6%, 51.5% and 37.6%, compared with rotary tillage. Overall, our results suggested that subsoiling 35 cm straw retention could improve soil characteristics, stabilize the phy-sical properties of the plough layer, increase soil water content in the 0-100 cm soil layer, and reduce water variation in spring and autumn. Consequently, it was the best management to promote the water and nutrient utilization of maize and achieve high yield. Our findings could provide theoretical basis for further research on the construction technology of the plough layer in Gansu irrigation area.

Permanent genetic resources added to Molecular Ecology Resources Database 1 October 2011-30 November 2011.

This article documents the addition of 139 microsatellite marker loci and 90 pairs of single-nucleotide polymorphism sequencing primers to the Molecular Ecology Resources Database. Loci were developed for the following species: Aglaoctenus lagotis, Costus pulverulentus, Costus scaber, Culex pipiens, Dascyllus marginatus, Lupinus nanus Benth, Phloeomyzus passerini, Podarcis muralis, Rhododendron rubropilosum Hayata var. taiwanalpinum and Zoarces viviparus. These loci were cross-tested on the following species: Culex quinquefasciatus, Rhododendron pseudochrysanthum Hay. ssp. morii (Hay.) Yamazaki and R. pseudochrysanthum Hayata. This article also documents the addition of 48 sequencing primer pairs and 90 allele-specific primers for Engraulis encrasicolus.

Disposable ionic liquid coating for headspace solid-phase microextraction of benzene, toluene, ethylbenzene, and xylenes in paints followed by gas chromatography-flame ionization detection.

Solid-phase microextraction (SPME) with a disposable ionic liquid (IL) coating was developed for headspace extraction of benzene, toluene, ethylbenzene, and xylenes (BTEX) in paints. The SPME fiber was coated with IL prior to every extraction, then the analytes were extracted and desorbed on the injection port of gas chromatography, and finally the IL coating on the fiber was washed out with solvents. The coating and washing out of IL from the fiber can be finished in a few minutes. This disposable IL-coated fiber was applied to determine BTEX in water-soluble paints with results in good agreement with that obtained by using commercially available SPME fibers. For all the four studied paints samples, the benzene contents were under the detection limits, but relatively high contents of toluene, ethylbenzene and xylenes (56-271 microg g(-1)) were detected with spiked recoveries in the range of 70-114%. Compared to the widely used commercially available SPME fibers, this proposed disposable IL-coated fiber has much lower cost per determination, comparable reproducibility (RSD < 11%), and no carryover between each determination. Considering that IL possess good extractability for various organic compounds and metals ions, and that task-specific IL can be designed and synthesized for selective extraction of target analytes, this disposable IL coating SPME might has great potential in sample preparation.

Determination of methyl tert-butyl ether (MTBE) in Chinese fuels by gas chromatography/mass spectrometry and gas chromatography/flame ionization detector.

A method was developed to determine the concentration of methyl tert-butyl ether(MTBE) in gasoline, diesel and heating oil by gas chromatography(GC) with mass spectrometry(GC-MS) or flame ionization detection (FID). The diluted gasoline was directly injected into the GC, and the complete separation of MTBE from co-eluting hydrocarbons was not required. GC/MS or GC/FID method can be used to analyze MTBE in different concentration range and have good consistency.

Sulfamethoxazole-imprinted polymer for selective determination of sulfamethoxazole in tablets.

A sulfamethoxazole (SMO)-imprinted polymer (MIP) was prepared in acetonitrile using the mixture of acrylamide and 4-vinylpyridine as functional monomers. The molecular recognition properties of the polymer was evaluated in both acetonitrile and aqueous acetonitrile mobile phases. SMO contents in two kinds of tablets were determined satisfactorily using the MIP packed HPLC column with aqueous mobile phase.

Cyclic voltammetry characterization of metal complex imprinted polymer.

Polymer capable of specific binding to Cu(2+)-2, 2'-dipyridyl complex was prepared by molecular imprinting technology. The binding specificity of the polymer to the template (Cu(2+)-2, 2'-dipyridyl complex) was investigated by cyclic voltammetric scanning using the carbon paste electrode modified by polymer particles in phosphate buffer solution. Factors that influence rebinding of the imprinted polymer were explored. The results demonstrated that cyclic voltammetry was an efficient approach to explore interactions between template and imprinted polymers.

Determination of sulfonylurea herbicides by continuous-flow liquid membrane extraction on-line coupled with high-performance liquid chromatography.

On-line coupling continuous-flow liquid membrane extraction (CFLME) with HPLC, a novel automatic system was developed for the determination of sulfonylurea herbicides in water. After an automatic trace-enrichment process by CFLME, which is the combination of continuous flow liquid-liquid extraction and support liquid membrane (SLM) extraction, the target analytes were concentrated in 50 microl of 0.2 M Na2CO3-NaHCO3 (pH 10.0) buffer. The concentrated sample solutions were injected directly onto a C18 analytical column with a valve, and detected at 240 nm with a diode array detector. Metsulfuron methyl (MSM), and DPX-A 7881 were baseline separated with a mobile phase consisting of methanol and 67 mM KH2PO4-Na2HPO4 (pH 5.91) buffer (45+55, v+v) at a flow-rate of 1.0 ml min(-1). With an enrichment time of 10 min and enrichment sample volume of 20 ml, the enrichment factors and detection limits are 100 and 0.05 microg l(-1) for MSM, and 96 and 0.1 microg l(-1) for DPX-A 7881, respectively. The linear range and precision (RSD) are 0.1-50 microg l(-1) and 7.0% for MSM, and 0.2-50 microg l(-1) and 9.2% for DPX-A 7881, respectively. This proposed method was applied to determine MSM and DPX-A 7881 in seawater, tap water, and bottled mineral water with spiked recoveries in the range of 83-95% for MSM and 88-100% for DPX-A 7881, respectively.