RESUMEN
The development of high-frequency devices and transducers in recent years has enabled the growth of the use of dermatologic ultrasound. Real-time monitoring of the anatomy of the face during the application of aesthetic injectables potentially prevents complications such as vascular occlusions. Injecting physicians starting out in the practice of ultrasound-guided injections are commonly faced with practical questions about its use. In this article, based on the experience with ultrasound-guided filler injections of 2 large clinical centers in 2 countries, the authors summarize the steps involved when setting out to use ultrasound to guide injectable aesthetic procedures, such as fillers and biostimulators. First, the authors discuss factors that guide the choice of equipment and ultrasound transducers to perform the procedures. Next, a detailed discussion on practical issues related to the procedure is provided. The authors then consider the positioning of operators and equipment in the treatment field. The authors conclude by suggesting 2 possible techniques to guide injectable procedures: (1) scan before injecting or (2) scan while injecting.
Asunto(s)
Técnicas Cosméticas , Rellenos Dérmicos , Humanos , Inyecciones , Ultrasonografía , Ultrasonografía Doppler , Técnicas Cosméticas/efectos adversos , Rellenos Dérmicos/efectos adversosRESUMEN
Shape morphing implicates that a specific condition leads to a morphing reaction. The material thus transforms from one shape to another in a predefined manner. In this paper, not only the target shape but rather the evolution of the material's shape as a function of the applied strain is programmed. To rationalize the design process, concepts from informatics (processing functions, for example, Poisson's ratio (PR) as function of strain: ν = f(ε) and if-then-else conditions) will be introduced. Three types of shape morphing behavior will be presented: (1) achieving a target shape by linearly increasing the amplitude of the shape, (2) filling up a target shape in linear steps, and (3) shifting a bulge through the material to a target position. In the first case, the shape is controlled by a geometric gradient within the material. The filling kind of behavior was implemented by logical operations. Moreover, programming moving hillocks (3) requires to implement a sinusoidal function εy = sin (εx ) and an if-then-else statement into the unit cells combined with a global stiffness gradient. The three cases will be used to show how the combination of mechanical mechanisms as well as the related parameter distribution enable a programmable shape morphing behavior in an inverse design process.
RESUMEN
For soft robotics and programmable metamaterials, novel approaches are required enabling the design of highly integrated thermoresponsive actuating systems. In the concept presented here, the necessary functional component was obtained by polymer syntheses. First, poly(1,10-decylene adipate) diol (PDA) with a number average molecular weight M n of 3290 g·mol-1 was synthesized from 1,10-decanediol and adipic acid. Afterward, the PDA was brought to reaction with 4,4'-diphenylmethane diisocyanate and 1,4-butanediol. The resulting polyester urethane (PEU) was processed to the filament, and samples were additively manufactured by fused-filament fabrication. After thermomechanical treatment, the PEU reliably actuated under stress-free conditions by expanding on cooling and shrinking on heating with a maximum thermoreversible strain of 16.1%. Actuation stabilized at 12.2%, as verified in a measurement comprising 100 heating-cooling cycles. By adding an actuator element to a gripper system, a hen's egg could be picked up, safely transported and deposited. Finally, one actuator element each was built into two types of unit cells for programmable materials, thus enabling the design of temperature-dependent behavior. The approaches are expected to open up new opportunities, e.g., in the fields of soft robotics and shape morphing.