Inhibitor activity of Lactiplantibacillus plantarum LP5 on thermotolerant campylobacter with different biofilm-forming capacities.

AIMS: To evaluate the biofilm-forming capacity of thermotolerant Campylobacter (TC) strains from poultry production and to analyse the inhibitory capacity of Lactiplantibacillus plantarum LP5 against TC on different materials. METHODS AND RESULTS: Biofilm-forming capacity by Campylobacter jejuni and Campylobacter coli was analysed by cell adhesion in polystyrene plates. TC were classified as non-biofilm-forming (NBF, 1.3%), weak biofilm-forming (WBF, 68.4%), moderate biofilm-forming (MBF, 27.6%), and strong biofilm-forming (SBF, 2.7%). The inhibitory capacity of L. plantarum LP5 against TC was tested on stainless-steel, nylon, aluminium, and glass disks (treated group) and compared with biofilm-forming TC (control group). Lactiplantibacillus plantarum LP5 was inoculated, and then TC. Biofilm was removed in both experimental groups and TC and LP5 bacterial counts were performed. The L. plantarum LP5 presence reduced the formation of TC biofilm (P < 0.001). The material type and strain category influenced biofilm formation, with stainless-steel and the SBF strain being the material and TC having the highest adhesion (P < 0.001). Lactiplantibacillus plantarum LP5 formed a similar biofilm on all materials (P = 0.823). CONCLUSIONS: This trial showed very promising results; L. plantarum LP5 could be incorporated as a bio-protector of TC on different surfaces.

Characterization of the Sorbitol Utilization Cluster of the Probiotic Pediococcus parvulus 2.6: Genetic, Functional and Complementation Studies in Heterologous Hosts.

Pediococcus parvulus 2.6 secretes a 2-substituted (1,3)-ß-D-glucan with prebiotic and immunomodulatory properties. It is synthesized by the GTF glycosyltransferase using UDP-glucose as substrate. Analysis of the P. parvulus 2.6 draft genome revealed the existence of a sorbitol utilization cluster of six genes (gutFRMCBA), whose products should be involved in sorbitol utilization and could generate substrates for UDP-glucose synthesis. Southern blot hybridization analysis showed that the cluster is located in a plasmid. Analysis of metabolic fluxes and production of the exopolysaccharide revealed that: (i) P. parvulus 2.6 is able to metabolize sorbitol, (ii) sorbitol utilization is repressed in the presence of glucose and (iii) sorbitol supports the synthesis of 2-substituted (1,3)-ß-D-glucan. The sorbitol cluster encodes two putative regulators, GutR and GutM, in addition to a phosphoenolpyruvate-dependent phosphotransferase transport system and sorbitol-6-phosphate dehydrogenase. Therefore, we investigated the involvement of GutR and GutM in the expression of gutFRMCBA. The promoter-probe vector pRCR based on the mrfp gene, which encodes the fluorescence protein mCherry, was used to test the potential promoter of the cluster (P gut ) and the genes encoding the regulators. This was performed by transferring by electrotransformation the recombinant plasmids into two hosts, which metabolize sorbitol: Lactobacillus plantarum and Lactobacillus casei. Upon growth in the presence of sorbitol, but not of glucose, only the presence of P gut was required to support expression of mrfp in L. plantarum. In L. casei the presence of sorbitol in the growth medium and the pediococcal gutR or gutR plus gutM in the genome was required for P gut functionality. This demonstrates that: (i) P gut is required for expression of the gut cluster, (ii) P gut is subjected to catabolic repression in lactobacilli, (iii) GutR is an activator, and (iv) in the presence of sorbitol, trans-complementation for activation of P gut exists in L. plantarum but not in L. casei.

Quantification of viable Escherichia coli O157:H7 in meat products by duplex real-time PCR assays.

Rapid and specific detection of viable Escherichia coli O157:H7 cells in ready-to-eat (RTE) meat products, by duplex quantitative PCR (qPCR) procedures with mRNA and SYBR Green and TaqMan methodologies were developed. Specific primers and probes were designed based on the serotype of E. coli O157:H7, fliCh7 and rfbE genes. No cross-reactivity with other microorganisms was observed. The detection limit of the assays was 10(1) or 10(2)CFU/g for artificially contaminated meat products, and after a 4h enrichment period at 37 °C, the detection limit decreased to about 1 CFU/g. Time-to completion of the assay was approximately 8h. Thus, these qPCR methods offer a useful, rapid and efficient tool for screening viable E. coli O157:H7 in RTE meat products. This tool could also be proposed for monitoring these foodborne pathogens in HACCP programs.

Quantitative real-time PCR method with internal amplification control to quantify cyclopiazonic acid producing molds in foods.

A quantitative TaqMan real-time PCR (qPCR) method that includes an internal amplification control (IAC) to quantify cyclopiazonic acid (CPA)-producing molds in foods has been developed. A specific primer pair (dmaTF/dmaTR) and a TaqMan probe (dmaTp) were designed on the basis of dmaT gene which encodes the enzyme dimethylallyl tryptophan synthase involved in the biosynthesis of CPA. The IAC consisted of a 105 bp chimeric DNA fragment containing a region of the hly gene of Listeria monocytogenes. Thirty-two mold reference strains representing CPA producers and non-producers of different mold species were used in this study. All strains were tested for CPA production by high-performance liquid chromatography-mass spectrometry (HPLC-MS). The functionality of the designed qPCR method was demonstrated by the high linear relationship of the standard curves relating to the dmaT gene copy numbers and the Ct values obtained from the different CPA producers tested. The ability of the qPCR protocol to quantify CPA-producing molds was evaluated in different artificially inoculated foods. A good linear correlation was obtained over the range 1-4 log cfu/g in the different food matrices. The detection limit in all inoculated foods ranged from 1 to 2 log cfu/g. This qPCR protocol including an IAC showed good efficiency to quantify CPA-producing molds in naturally contaminated foods avoiding false negative results. This method could be used to monitor the CPA producers in the HACCP programs to prevent the risk of CPA formation throughout the food chain.

Duplex real-time PCR method with internal amplification control for quantification of verrucosidin producing molds in dry-ripened foods.

Verrucosidin, which is a tremorgenic mycotoxin responsible for neurological diseases, has been detected in different dry-ripened foods as consequence of the growth of toxigenic molds. To improve food safety, the presence of verrucosidin producing molds in these kind foods should be quantified. The aim of this study was to design a duplex real-time PCR (qPCR) protocol based on TaqMan methodology with an internal amplification control (IAC). Eleven verrucosidin producing and 11 non producing strains belonging to different species often reported in food products were used. Verrucosidin production was tested by micellar electrokinetic capillary electrophoresis (MECE) and high-pressure liquid chromatography-mass spectrometry (HPLC-MS). A primer pair (VerF1/VerR1) and a TaqMan probe (Verprobe) were designed from the SVr1 probe sequence of a verrucosidin producing Penicillium polonicum. The conserved regions of the ß-tubulin gene were used to design primers (TubF1/TubR1) and probe (Tubprobe) of the non-competitive IAC. The functionality of the developed method was demonstrated by the high linear relationship of the standard curves which relating Ct values and DNA template of the tested verrucosidin producers using the verrucosidin and IAC primers. The ability to quantify verrucosidin producers of the developed TaqMan assay in all artificially inoculated food samples was successful, with a minimum detection limit of 1 log cfu per gram of food. This qPCR protocol including an IAC could be very useful to quantify verrucosidin producing molds in dry-ripened foods avoiding false negative results. This method should be proposed to monitor the target molds in HACCP programs to prevent the risk of verrucosidin formation and consequently avoid its presence in the food chain.