Silicon-integrated short-wavelength hybrid-cavity VCSEL.

We demonstrate a short-wavelength hybrid-cavity vertical-cavity surface-emitting laser (VCSEL) heterogeneously integrated on silicon. A GaAs-based "half-VCSEL" has been attached to a dielectric distributed Bragg reflector (DBR) on a silicon wafer using ultra-thin divinylsiloxane-bis-benzocyclobutene (DVS-BCB) adhesive bonding, thereby creating a cavity with the standing-wave optical field extending over the silicon- and GaAs-based parts of the cavity. A 9 µm oxide aperture diameter VCSEL with a threshold current of 1.2 mA produces 1.6 mW optical output power at 6.0 mA bias current with a wavelength of ~845 nm.

Assessment of VCSEL thermal rollover mechanisms from measurements and empirical modeling.

We use an empirical model together with experimental measurements for studying mechanisms contributing to thermal rollover in vertical-cavity surface-emitting lasers (VCSELs). The model is based on extraction of the temperature dependence of threshold current, internal quantum efficiency, internal optical loss, series resistance and thermal impedance from measurements of output power, voltage and lasing wavelength as a function of bias current over an ambient temperature range of 15-100 °C. We apply the model to an oxide-confined, 850-nm VCSEL, fabricated with a 9-µm inner-aperture diameter and optimized for high-speed operation, and show for this specific device that power dissipation due to linear power dissipation (sum total of optical absorption, carrier thermalization, carrier leakage and spontaneous carrier recombination) exceeds power dissipation across the series resistance (quadratic power dissipation) at any ambient temperature and bias current. We further show that the dominant contributors to self-heating for this particular VCSEL are quadratic power dissipation, internal optical loss, and carrier leakage. A rapid reduction of the internal quantum efficiency at high bias currents (resulting in high temperatures) is identified as being the major cause of thermal rollover. Our method is applicable to any VCSEL and is useful for identifying the mechanisms limiting the thermal performance of the device and to formulate design strategies to ameliorate them.

Experimental comparison of modulation formats in IM/DD links.

We present an experimental comparison of modulation formats for optical intensity modulated links with direct detection. Specifically, we compare OOK, QPSK on an electrical subcarrier and a new modulation format named OOPSK. The OOPSK modulation format is shown to have better sensitivity than the other modulation formats, in agreement with theoretical predictions. The impact of propagation in multimode fiber is also studied and the results show that all modulation formats have similar sensitivity penalties, with respect to the fibre length.

30 Gbps 4-PAM transmission over 200 m of MMF using an 850 nm VCSEL.

We present high speed real time, error free 4-PAM transmission for short range optical links based on a VCSEL operating at 850 nm, a multimode fibre and a simple intensity detector. Transmission speeds of 25 Gbps and 30 Gbps are demonstrated, and the maximum fibre reaches were 300 m and 200 m, respectively. The 4-PAM is also compared with OOK transmission at 25 Gbps, and we find that at this bit rate 4-PAM increases the error free transmission distance in the multimode fibre by 100 m, compared to OOK.