Prospects for Simultaneously Capturing Carbon Dioxide and Harvesting Water from Air.

Mitigation of anthropogenic climate change is expected to require large-scale deployment of carbon dioxide removal strategies. Prominent among these strategies is direct air capture with sequestration (DACS), which encompasses the removal and long-term storage of atmospheric CO2  by purely engineered means. Because it does not require arable land or copious amounts of freshwater, DACS is already attractive in the context of sustainable development, but opportunities to improve its sustainability still exist. Leveraging differences in the chemistry of CO2  and water adsorption within porous solids, here, the prospect of simultaneously removing water alongside CO2  in direct air capture operations is investigated. In many cases, the co-adsorbed water can be desorbed separately from chemisorbed CO2  molecules, enabling efficient harvesting of water from air. Depending upon the material employed and process conditions, the desorbed water can be of sufficiently high purity for industrial, agricultural, or potable use and can thus improve regional water security. Additionally, the recovered water can offset a portion of the costs associated with DACS. In this Perspective, molecular- and process-level insights are combined to identify routes toward realizing this nascent yet enticing concept.

Scalable Formation of Diamine-Appended Metal-Organic Framework Hollow Fiber Sorbents for Postcombustion CO2 Capture.

We describe a straightforward and scalable fabrication of diamine-appended metal-organic framework (MOF)/polymer composite hollow fiber sorbent modules for CO2 capture from dilute streams, such as flue gas from natural gas combined cycle (NGCC) power plants. A specific Mg-MOF, Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate), incorporated into poly(ether sulfone) (PES) is directly spun through a conventional "dry-jet, wet-quench" method. After phase separation, a cyclic diamine 2-(aminomethyl)piperidine (2-ampd) is infused into the MOF within the polymer matrix during postspinning solvent exchange. The MOF hollow fibers from direct spinning contain as high as 70% MOF in the total fibers with 98% of the pure MOF uptake. The resulting fibers exhibit a step isotherm and a "shock-wave-shock" breakthrough profile consistent with pure 2-ampd-Mg2(dobpdc). This work demonstrates a practical method for fabricating 2-ampd-Mg2(dobpdc) fiber sorbents that display the MOF's high CO2 adsorption capacity while lowering the pressure drop during operation.

Aluminosilicate Zeolite EMM-28 Containing Supercavities Determined by Continuous Rotation Electron Diffraction.

A new aluminosilicate zeolite, denoted EMM-28, has been successfully synthesized on a large scale using 1,1-(3,3-(1,3-phenylene)bis(propane-3,1-diyl))bis(1-methylpyrrolidinium) hydroxide as an organic structure directing agent (OSDA), which was scaled up to an ∼20 g scale with a yield of 77%. It crystallizes as thin plates (40-100 nm in thickness), and the corresponding powder X-ray diffraction (PXRD) pattern shows significant peak broadening which makes it insufficient for structure determination. Continuous rotation electron diffraction (cRED) data collected from 13 crystals were successfully used to solve and refine the structure of EMM-28. This illustrates that cRED data are capable of performing structure determination despite limited PXRD data quality. EMM-28 has a unique framework structure containing supercavities, >21 Šin size, connected by one-dimensional 10-ring channels. High-resolution transmission electron microscopy (HRTEM) confirmed the structure model. The structure of EMM-28 is related to several known zeolite structures with large cavities.

Deep CCS: Moving Beyond 90% Carbon Dioxide Capture.

The large-scale deployment of carbon capture technologies is expected to play a crucial role in efforts to meet stringent climate targets set forth by the Paris Agreement, but current models rely heavily upon carbon dioxide removal (CDR) strategies for which viability at the gigatonne scale is uncertain. While most 1.5 and 2 °C scenarios project rapid decarbonization of the energy sector facilitated by carbon capture and sequestration (CCS), they generally assume that CCS units can only capture ∼90% of the CO2 in coal and natural gas combustion flues because this was previously considered the optimal condition for aqueous amine scrubbers. In this Perspective, we discuss a small but growing body of literature that examines the prospect of moving significantly beyond 90% capture-a concept we term deep CCS-in light of recent developments in materials and process design. The low incremental costs associated with performing varying degrees of deep CCS suggest that this approach is not only feasible but may also alleviate burdens placed upon CDR techniques facing significant barriers to large-scale deployment. We estimate that rapid deployment of deep CCS in deep decarbonization pathways could avoid more than 1 gigatonne of CO2 globally each year. The principles of deep CCS could also be applied directly to the CDR strategy of employing bioenergy with CCS, which could lead to a significant alleviation of the land and freshwater burden associated with this technology.

Buffered Coordination Modulation as a Means of Controlling Crystal Morphology and Molecular Diffusion in an Anisotropic Metal-Organic Framework.

Significant advances have been made in the synthesis of chemically selective environments within metal-organic frameworks, yet materials development and industrial implementation have been hindered by the inability to predictively control crystallite size and shape. One common strategy to control crystal growth is the inclusion of coordination modulators, which are molecular species designed to compete with the linker for metal coordination during synthesis. However, these modulators can simultaneously alter the pH of the reaction solution, an effect that can also significantly influence crystal morphology. Herein, noncoordinating buffers are used to independently control reaction pH during metal-organic framework synthesis, enabling direct interrogation of the role of the coordinating species on crystal growth. We demonstrate the efficacy of this strategy in the synthesis of low-dispersity single-crystals of the framework Co2(dobdc) (dobdc4-= 2,5-dioxido-1,4-benzenedicarboxylate) in a pH 7-buffered solution using cobalt(II) acetate as the metal source. Density functional theory calculations reveal that acetate competitively binds to Co during crystallization, and by using a series of cobalt(II) salts with carboxylate anions of varying coordination strength, it is possible to control crystal growth along the c-direction. Finally, we use zero length column chromatography to show that crystal morphology has a direct impact on guest diffusional path length for the industrially important hydrocarbon m-xylene. Together, these results provide molecular-level insight into the use of modulators in governing crystallite morphology and a powerful strategy for the control of molecular diffusion rates within metal-organic frameworks.

Cooperative carbon capture and steam regeneration with tetraamine-appended metal-organic frameworks.

Natural gas has become the dominant source of electricity in the United States, and technologies capable of efficiently removing carbon dioxide (CO2) from the flue emissions of natural gas-fired power plants could reduce their carbon intensity. However, given the low partial pressure of CO2 in the flue stream, separation of CO2 is particularly challenging. Taking inspiration from the crystal structures of diamine-appended metal-organic frameworks exhibiting two-step cooperative CO2 adsorption, we report a family of robust tetraamine-functionalized frameworks that retain cooperativity, leading to the potential for exceptional efficiency in capturing CO2 under the extreme conditions relevant to natural gas flue emissions. The ordered, multimetal coordination of the tetraamines imparts the materials with extraordinary stability to adsorption-desorption cycling with simulated humid flue gas and enables regeneration using low-temperature steam in lieu of costly pressure or temperature swings.

Small Pore Aluminosilicate EMM-37: Synthesis and Structure Determination Using Continuous Rotation Electron Diffraction.

A new aluminosilicate zeolite, denoted EMM-37, with a 3D small pore channel system, has been synthesized using a diquaternary ammonium molecule as the structure directing agent (SDA) and metakaolin as the aluminum source. The structures of both as-made and calcined forms of EMM-37 were solved and refined using continuous rotation electron diffraction (cRED) data. cRED is a powerful method for the collection of 3D electron diffraction data from submicron- and nanosized crystals, which allows for successful solution and refinement of complex structures in symmetry as low as P1̅.

EMM-17, a New Three-Dimensional Zeolite with Unique 11-Ring Channels and Superior Catalytic Isomerization Performance.

A new catalytically active zeolite, designated EMM-17 (ExxonMobil Material-17), with a three-dimensional (3D) 11 × 10 × 10-ring topology has been discovered from high throughput experiments while evaluating a family of new organic structure directing agents (OSDAs), 1-alkyl-4-(pyrrolidin-1-yl)pyridin-1-ium hydroxide. The framework structure was determined by model building techniques and confirmed by diffraction calculations. The EMM-17 structure is a random intergrowth of two polymorphs which have a 3D arrangement of intersecting 11 × 10 × 10-ring pores. EMM-17 is stable to calcination to remove the OSDA and can be reproducibly synthesized in the presence of fluoride using common, inexpensive reagents over a wide Si/Al range from 15 to infinity, enabling the catalyst acidity to be tailored to almost any petrochemical application. Unlike OSDAs for many new zeolite structures, the OSDAs for EMM-17 are prepared in one simple alkylation step, making EMM-17 an easy to prepare, highly accessible, catalytically active zeolite. Zeolites containing odd numbered channel sizes are rare, and this is the first confirmed example of a 3D 11-ring aluminosilicate zeolite with a pore size in between those of the commercially important 10- and 12-ring zeolites such as ZSM-5 and Zeolite-Y, respectively. Catalysts prepared from EMM-17 exhibit significantly higher activity for catalytic isomerization with no loss in selectivity than current state of the art catalysts. Catalytic isomerization of linear to branched alkanes is a critical component of commercial dewaxing, allowing for the improvement of cold flow properties of hydrocarbon fuels and lubricants through selective hydroisomerization of normal paraffins.

Water Enables Efficient CO2 Capture from Natural Gas Flue Emissions in an Oxidation-Resistant Diamine-Appended Metal-Organic Framework.

Supported by increasingly available reserves, natural gas is achieving greater adoption as a cleaner-burning alternative to coal in the power sector. As a result, carbon capture and sequestration from natural gas-fired power plants is an attractive strategy to mitigate global anthropogenic CO2 emissions. However, the separation of CO2 from other components in the flue streams of gas-fired power plants is particularly challenging due to the low CO2 partial pressure (∼40 mbar), which necessitates that candidate separation materials bind CO2 strongly at low partial pressures (≤4 mbar) to capture ≥90% of the emitted CO2. High partial pressures of O2 (120 mbar) and water (80 mbar) in these flue streams have also presented significant barriers to the deployment of new technologies for CO2 capture from gas-fired power plants. Here, we demonstrate that functionalization of the metal-organic framework Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) with the cyclic diamine 2-(aminomethyl)piperidine (2-ampd) produces an adsorbent that is capable of ≥90% CO2 capture from a humid natural gas flue emission stream, as confirmed by breakthrough measurements. This material captures CO2 by a cooperative mechanism that enables access to a large CO2 cycling capacity with a small temperature swing (2.4 mmol CO2/g with ΔT = 100 °C). Significantly, multicomponent adsorption experiments, infrared spectroscopy, magic angle spinning solid-state NMR spectroscopy, and van der Waals-corrected density functional theory studies suggest that water enhances CO2 capture in 2-ampd-Mg2(dobpdc) through hydrogen-bonding interactions with the carbamate groups of the ammonium carbamate chains formed upon CO2 adsorption, thereby increasing the thermodynamic driving force for CO2 binding. In light of the exceptional thermal and oxidative stability of 2-ampd-Mg2(dobpdc), its high CO2 adsorption capacity, and its high CO2 capture rate from a simulated natural gas flue emission stream, this material is one of the most promising adsorbents to date for this important separation.

Challenges and opportunities for adsorption-based CO2 capture from natural gas combined cycle emissions.

In recent years, the power sector has shown a growing reliance on natural gas, a cleaner-burning fuel than coal that emits approximately half as much CO2 per kWh of energy produced. This rapid growth in the consumption of natural gas has led to increased CO2 emissions from gas-fired power plants. To limit the contribution of fossil fuel combustion to atmospheric CO2 levels, carbon capture and sequestration has been proposed as a potential emission mitigation strategy. However, despite extensive exploration of solid adsorbents for CO2 capture, few studies have examined the performance of adsorbents in post-combustion capture processes specific to natural gas flue emissions. In this perspective, we emphasize the importance of considering gas-fired power plants alongside coal-fired plants in future analyses of carbon capture materials. We address specific challenges and opportunities related to adsorptive carbon capture from the emissions of gas-fired plants and discuss several promising candidate materials. Finally, we suggest experiments to determine the viability of new CO2 capture materials for this separation. This broadening in the scope of current carbon capture research is urgently needed to accelerate the deployment of transformational carbon capture technologies.

Overcoming double-step CO2 adsorption and minimizing water co-adsorption in bulky diamine-appended variants of Mg2(dobpdc).

Alkyldiamine-functionalized variants of the metal-organic framework Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) are promising for CO2 capture applications owing to their unique step-shaped CO2 adsorption profiles resulting from the cooperative formation of ammonium carbamate chains. Primary,secondary (1°,2°) alkylethylenediamine-appended variants are of particular interest because of their low CO2 step pressures (≤1 mbar at 40 °C), minimal adsorption/desorption hysteresis, and high thermal stability. Herein, we demonstrate that further increasing the size of the alkyl group on the secondary amine affords enhanced stability against diamine volatilization, but also leads to surprising two-step CO2 adsorption/desorption profiles. This two-step behavior likely results from steric interactions between ammonium carbamate chains induced by the asymmetrical hexagonal pores of Mg2(dobpdc) and leads to decreased CO2 working capacities and increased water co-adsorption under humid conditions. To minimize these unfavorable steric interactions, we targeted diamine-appended variants of the isoreticularly expanded framework Mg2(dotpdc) (dotpdc4- = 4,4''-dioxido-[1,1':4',1''-terphenyl]-3,3''-dicarboxylate), reported here for the first time, and the previously reported isomeric framework Mg-IRMOF-74-II or Mg2(pc-dobpdc) (pc-dobpdc4- = 3,3'-dioxidobiphenyl-4,4'-dicarboxylate, pc = para-carboxylate), which, in contrast to Mg2(dobpdc), possesses uniformally hexagonal pores. By minimizing the steric interactions between ammonium carbamate chains, these frameworks enable a single CO2 adsorption/desorption step in all cases, as well as decreased water co-adsorption and increased stability to diamine loss. Functionalization of Mg2(pc-dobpdc) with large diamines such as N-(n-heptyl)ethylenediamine results in optimal adsorption behavior, highlighting the advantage of tuning both the pore shape and the diamine size for the development of new adsorbents for carbon capture applications.

High-Throughput Synthesis and Structure of Zeolite ZSM-43 with Two-Directional 8-Ring Channels.

The aluminosilicate zeolite ZSM-43 (where ZSM = Zeolite Socony Mobil) was first synthesized more than 3 decades ago, but its chemical structure remained unsolved because of its poor crystallinity and small crystal size. Here we present optimization of the ZSM-43 synthesis using a high-throughput approach and subsequent structure determination by the combination of electron crystallographic methods and powder X-ray diffraction. The synthesis required the use of a combination of both inorganic (Cs+ and K+) and organic (choline) structure-directing agents. High-throughput synthesis enabled a screening of the synthesis conditions, which made it possible to optimize the synthesis, despite its complexity, in order to obtain a material with significantly improved crystallinity. When both rotation electron diffraction and high-resolution transmission electron microscopy imaging techniques are applied, the structure of ZSM-43 could be determined. The structure of ZSM-43 is a new zeolite framework type and possesses a unique two-dimensional channel system limited by 8-ring channels. ZSM-43 is stable upon calcination, and sorption measurements show that the material is suitable for adsorption of carbon dioxide as well as methane.

New High- and Low-Temperature Phase Changes of ZIF-7: Elucidation and Prediction of the Thermodynamics of Transitions.

We have found that the 3D zeolitic imidazolate framework ZIF-7 exhibits far more complex behavior in response to the adsorption of guest molecules and changes in temperature than previously thought. We believe that this arises from the existence of different polymorphs and different types of adsorption sites. We report that ZIF-7 undergoes a displacive, nondestructive phase change upon heating to above ∼700 °C in vacuum, or to ∼500 °C in CO2 or N2. This is the first example of a temperature-driven phase change in 3D ZIF frameworks. We predicted the occurrence of the high-temperature transition on the basis of thermodynamic arguments and analyses of the solid free-energy differences obtained from CO2 and n-butane adsorption isotherms. In addition, we found that ZIF-7 exhibits complex behavior in response to the adsorption of CO2 manifesting in double transitions on adsorption isotherms and a doubling of the adsorption capacity. We report adsorption microcalorimetry, molecular simulations, and detailed XRD investigations of the changes in the crystal structure of ZIF-7. Our results highlight mechanistic details of the phase transitions in ZIF-7 that are driven by adsorption of guest molecules at low temperature and by entropic effects at high temperature. We derived a phase diagram of CO2 in ZIF-7, which exhibits surprisingly complex re-entrant behavior and agrees with our CO2 adsorption measurements over a wide range of temperatures and pressures. We predicted phase diagrams of CH4, C3H6, and C4H10. Finally, we modeled the temperature-induced transition in ZIF-7 using molecular dynamics simulations in the isobaric-isothermal ensemble, confirming our thermodynamic arguments.

Crystal structure of zeolite MCM-68: a new three-dimensional framework with large pores.

The crystal structure of the aluminosilicate MCM-68 was solved from synchrotron powder diffraction data by the program FOCUS. The unit cell framework contains Si100.6Al11.4O224. This material crystallizes in space group P42/mnm, where, after Rietveld refinement, a=18.286(1) A and c=20.208(2) A. A three-dimensional framework is found that contains continuous 12-ring channels and two orthogonal, intersecting, undulating 10-ring channels. Rietveld refinement of the model coordinates optimizes the framework geometry, to match the observed intensity profile by Rwp=0.1371, R(F2)=0.1411. It is not possible to determine the location of approximately 0.84 K+ cations remaining in the unit cell after the material is steamed and then dehydrated. The framework model also successfully predicts observed electron diffraction data in two projections, and the tetragonal projection can be determined independently from these data by direct methods. The calculated density of the framework structure is 1.66 g/cm3, and the T-site framework density is 16.6 T/1000 A3.