Sleep-related breathing disorders in young orthodontic patients.

INTRODUCTION: This study aimed to find out the frequency of sleep-related breathing disorders (SRBD) in young orthodontic patients in Israel. SRBD is characterized by prolonged upper airway obstruction during sleep. METHODS: The study group consisted of 309 children aged 6-17 years who attended the Orthodontic Clinic at Hadassah Medical Center. Parents were asked to complete a translated validated Pediatric Sleep Questionnaire. RESULTS: Of the examined children, 10% were at high risk for SRBD. Boys were at higher risk for SRBD and were at high risk at a younger age than girls. Girls had a low risk of SRBD after adenotonsillectomy, whereas 50% of the boys that underwent adenotonsillectomy were at high risk for SRBD. CONCLUSIONS: Our findings propose that 10% of the children aged 6-17 years, who were seeking orthodontic consultation at our medical center, were at high risk for SRBD. Boys were significantly at a higher risk for SRBD than girls and were at high risk at a younger age. It is important to screen young orthodontic patients for SRBD and to refer high-risk patients to their physicians for further evaluation and treatment.

Computerized navigation for immediate loading of dental implants with a prefabricated metal frame: a feasibility study.

PURPOSE: To study the probability of using Image Guided Implantology (IGI) for planning and execution of a dental plan of 3 implants in a geometric pattern that fits a prefabricated metal frame accurately, simulating provisional restoration in immediate loading. MATERIAL AND METHODS: Ten mandible models were imaged by standard computed tomography. Three implants, two in the premolar and one in the molar area on each side of the jaws, were planned by use of the IGI system (Image Navigation Ltd, Moshav Ora, Israel). Two millimeter drilling and subsequent 3 millimeter widening drilling was performed with the real-time computerized navigation technology in the 120 sampling sites. In each step, parallel pins were inserted, and metal gauging frames with preplanned holes of incremental diameters and in the predefined geometric pattern were placed on the pins to evaluate the precision of fit. RESULTS: Full success was obtained in fitting all three 3-mm pins, with frames having clearance of 0.5 or 1 mm, and in matching pairs of pins 2 or 3 mm in diameter at clearances of 0.5 mm or greater. With more constrained clearances, matching of all 3 pins was 80% and 95% successful with 2-mm pins (clearance of 0.25 and 0.5 mm, respectively) and 60% and 95% successful with 3-mm pins (clearance of 0 and 0.25 mm, respectively). Some laterality bias was observed. CONCLUSIONS: This preliminary study shows that the IGI system enables accurate planning of implant number and location to be achieved together with planning for a prefabricated metal frame for immediate loading.

Computerized navigation for surgery of the lower jaw: comparison of 2 navigation systems.

PURPOSE: To evaluate the accuracy and applicability of 2 computerized navigation systems for surgery of the lower jaw. PATIENTS AND METHODS: Two patients diagnosed with a mucoepidermoid carcinoma of the lower jaw were prepared for tumor resection applying 2 different computerized navigation systems: the Image-Guided Implantology (IGI) system (DenX Advanced Dental Systems, Moshav Ora, Israel), which is specialized for dental implant surgery and the LandmarX system (Medtronic Xomed, Inc, Jacksonville, FL), which is designed for ear, nose, and throat surgery. Intraoperative accuracy of navigation of each of the systems was evaluated from the precision of targeting of distinctive anatomical landmarks in the mandible, including a preoperatively placed titanium screw. RESULTS: The navigational error of the IGI system was less than 0.5 mm, while that of the LandmarX system was between 3 mm and 4 mm. Tumor resection was performed with the guidance of the IGI system, and resulted in complete resection with tumor-free margins. CONCLUSIONS: The mobile nature of the lower jaw complicates its synchronization during surgery with the preacquired imaging data. The accuracy of navigation based on tracking of the patient's head is compromised by asynchronous movements of the mandible during surgery. Direct tracking of the lower jaw, via a teeth-mounted sensor frame, is superior to its indirect tracking. The teeth also provide a more secure basis for the fiducial markers than soft tissue attachment. We conclude that a computerized navigation system using a teeth-mounted sensor frame and teeth-supported fiducial markers enables more accurate navigation for surgery of the lower jaw.

Precision of flapless implant placement using real-time surgical navigation: a case series.

PURPOSE: To demonstrate the predictability of flapless surgery using navigation surgery. MATERIALS AND METHODS: Computer-generated preoperative implant planning was compared to actual placement by CT (computerized tomography) scanning of patients before and after surgery. Once pre- and postoperative coordinates of virtual implants were obtained, linear distances and angles were calculated. Coronal and apical errors consisted of the shortest distance from the preoperative planning to the postoperative overlay. RESULTS: Fourteen implants were placed in 6 patients who received CT scans before and after implant placement. Preoperative implant planning using software was compared to actual placement. The average discrepancy of the head of the implant was 0.89 mm +/- 0.53 SD (range, 0.32 to 1.96). The average discrepancy of the apex of the implant was 0.96 mm +/- 0.50 SD (range, 0.25 to 1.99). The average angle discrepancy and standard deviation were 3.78 degrees +/- 2.76 SD (range, 0.60 to 9.87). CONCLUSION: Optical computerized navigation is vulnerable to technological and technical errors. Yet, the present case series suggests that less than 1 mm of mean linear deviation and less than 4 degrees of angular deviation might be attainable.

Computerized navigation surgery for the safe placement of palatal implants.

Palatal endosseous implants are increasingly recognized as an important alternative for achieving maximal intraoral orthodontic anchorage; however, their safe surgical placement is a matter of concern. Available palatal bone is frequently limited, and erroneous drilling can damage adjacent structures. Computerized navigation surgery is an advanced surgical modality in which the surgical drill is accurately tracked and animated in real time on the radiological image of the surgical site. In implant dentistry, this surgical modality allows accurate navigation of the implant drilling procedure and increases safety and accuracy, compared with conventional dental implant surgery. This article outlines the principles of computerized navigation surgery and describes its application for the placement of palatal orthodontic implants. The merits of this approach are particularly important for patients with limited palatal bone when implant placement requires high surgical precision.

Immediate placement of dental implants into debrided infected dentoalveolar sockets.

PURPOSE: To describe a protocol for the immediate placement of endosseous implants into debrided infected dentoalveolar sockets. PATIENTS AND METHODS: A total of 30 implants were immediately placed into debrided infected sites in 20 patients. The pathology at the receptacle dentoalveolar sockets varied, and included subacute periodontal infection, perio-endo infection, chronic periodontal infection, chronic periapical lesion, and a periodontal cyst. The immediate placement protocol emphasized the meticulous debridement of the infected tissues in combination with peripheral ostectomy of the alveoli. Guided bone regeneration was accomplished to support bony healing of alveolar defects surrounding the implantation site. Pre- and postsurgical antibiotic therapy was administered. RESULTS: All implants but 1 were osseointegrated and functional when followed up after 12 to 72 months. One implant was mobile after its immediate restoration and was removed. Complications were related to the use of guided bone regeneration. Deficiency of the attached gingiva was noted in 1 case. The treatment approach is illustrated in 2 anterior maxilla cases with 3-year follow-up. CONCLUSIONS: Successful immediate implantation in debrided infected alveoli depends on the complete removal of all contaminated tissue and the controlled regeneration of the alveolar defect. With this proposed clinical approach, experienced clinicians may consider immediate implants as a viable treatment option in patients presenting with dentoalveolar infections.

Oral candidiasis prevention in transplantation patients: a comparative study.

AIM: Oral candidiasis occurs commonly in haematopoietic -stem cell transplantation (HSCT) patients carrying a risk of systemic candidemia and mortality. The aim of this pilot study was to design an effective protocol that prevents oral candidiasis and improves tolerability. METHODS: A prospective, randomized, longitudinal study with two treatment groups, (A) chlorhexidine (CHX) and (B) CHX combined with medium-dose amphotericin B (AMB), was performed. The investigators were blinded to the treatment arm. RESULTS: No clinical signs of oral candidiasis were observed in any of the 20 patients. All patients experienced neutropenia and were treated with antibiotics. The duration of antibiotic treatment was longer in group A than that in group B. The difference in systemic anti-fungal treatment was insignificant. Compliance was achieved in both groups, although tolerability was better in group A than that in group B. CONCLUSION: Effective oral anti-fungal prevention based on topical AMB was suggested. CHX mouthwash was also suggested to be effective as a single topical agent for the prevention of oral candidiasis in HSCT patients. The combination of topical CHX and medium-dose AMB-prophylactic protocol may achieve the same level of candidial prevention with better tolerability than that by AMB alone. More research is warranted.

Flapless approach for removal of bone graft fixing screws and placement of dental implants using computerized navigation: a technique and case report.

This article presents a technique for the removal of the screws used to fix a bone graft and for the placement of dental implants in a flapless approach that utilizes the tracking technology of a computerized navigation system. A 24-year-old female patient injured in a terrorist bombing suffered from tooth loss and a bone defect in the maxilla. The area was grafted with bone from the chin in preparation for the placement of dental implants. Four months following the grafting procedure, the fixing screws were removed and the dental implants were placed in a flapless approach by the application of a specialized computerized navigation system. This technique emphasizes the potential of computerized navigation approaches in the facilitation of minimally invasive oral surgery.

Application of a surgical navigation system for implant surgery in a deficient alveolar ridge postexcision of an odontogenic myxoma.

PURPOSE: The study's purpose was to describe the application of a surgical navigation system for the treatment-planning and subsequent precise placement of dental implants in a patient, 2 years postexcision of a mandibular odontogenic myxoma. PATIENTS AND METHODS: A 25-year-old male patient presented for rehabilitation of a deficient edentulous ridge at the right mandible following excision of an odontogenic myxoma. The patient was imaged by dental computed tomography while wearing an individually fitted interfacing acrylic splint. Thereafter, computed tomography data were imported to the Image-Guided Implantology system (IGI; DenX Advanced Dental Systems Ltd, Moshav Ora, Israel), and a precise 3-dimensional implant treatment plan was contemplated considering the compromised anatomy and the anticipated prosthesis. RESULTS: Three dental implants were placed using a surgical navigation approach with precise coordination to the presurgical treatment plan and subsequently were restored with a screw-retained fixed prosthesis. At the 1-year follow-up, the implants were osseointegrated and the fixed prosthesis was fully functional. CONCLUSIONS: Computerized navigation is indicated for dental implant surgery in patients with deficient alveolar ridge where coordination of the positioning of the implants to the final prosthesis is difficult.

Intraoperative computerized navigation for flapless implant surgery and immediate loading in the edentulous mandible.

Computerized navigation surgery has evolved to facilitate minimally invasive procedures, the gold standard of surgery today. While flapless implant surgery may be clinically beneficial, it has generally been perceived as a blind procedure limited to straightforward cases that do not pose a risk of cortical plate perforation. The objective of this report is to describe a protocol for flapless implant placement in a completely edentulous mandible using computerized navigation surgery. The Image Guided Implantology system (IGI, DenX Advanced Dental Systems) is described. The IGI system provides real-time imaging of the dental drill and transforms flapless implant surgery into a fully monitored procedure. The highly accurate intraoperative navigation enables precise transfer of the detailed presurgical implant plan to the patient. This is particularly valuable in edentulous jaws lacking any indication of the dental arch. The accurate positioning of the implants, based on the presurgical digital plan, allows fabrication of a provisional fixed prosthesis before the implant surgery for immediate postoperative loading. This innovative protocol can enhance prosthodontic-driven placement of implants in a fully monitored flapless surgery.

Image-guided navigation system for placing dental implants.

Navigation-guided surgery has recently been introduced into various surgical disciplines, including oral and maxillofacial surgery. Since the advent of dental implants, dental computed tomography (CT) scans have been used as a diagnostic tool for preoperative planning, but not as part of the surgical phase. This article explains the principles of computer-assisted surgery and describes the use of a computer-guided navigation system in dental implantology. The system uses preoperative dental CT scans for planning and as an integral part of the surgical procedure. This system allows continuous intraoperative coordination of the implantation phase with the preoperative plan, optimizing the accuracy of implant surgery. Deviations from the planned location of the implants are minimal. Several cases are discussed.

Navigation surgery for dental implants: assessment of accuracy of the image guided implantology system.

PURPOSE: The purpose of this study is to assess the accuracy of the navigation provided by the Image Guided Implantology system (DenX Advanced Dental Systems, Moshav Ora, Israel), which was designed to guide the surgeon in the placement of dental implants. MATERIALS AND METHODS: Seven jaw models incorporating special ceramic spheres were imaged by dental computerized tomography. The coordinates of these reference ceramic markers were calculated by the Image Guided Implantology and compared with their actual position coordinates as identified on the computed tomography image. RESULTS: The overall mean spatial navigation error was 0.35 +/- 0.14 mm. The 1-tailed probability of any single measurement exceeding 0.75 mm was less than 0.003, and that exceeding 1 mm was less than 0.0001. CONCLUSION: The Image Guided Implantology system provides highly accurate navigation with less than 0.73 mm error, which is acceptable in dental implantology. The accurate reporting of the exact position of the drilling bur should minimize the potential risk of damage to critical anatomic structures. The accurate intraoperative navigation allows the surgeon to precisely transfer the presurgical plan to the patient.