Membranes Matter: Preventing Ammonia Crossover during Electrochemical Ammonia Synthesis.

The electrochemical nitrogen and nitrate reduction reactions (E-NRR and E-NO3RR) promise to provide decentralized and fossil-fuel-free ammonia synthesis, and as a result, E-NRR and E-NO3RR research has surged in recent years. Membrane NH3/NH4+ crossover during E-NRR and E-NO3RR decreases Faradaic efficiency and thus the overall yield. During catalyst evaluation, such unaccounted-for crossover results in measurement error. Herein, several commercially available membranes were screened and evaluated for use in ammonia-generating electrolyzers. NH3/NH4+ crossover of the commonly used cation-exchange membrane (CEM) Nafion 212 was measured in an H-cell architecture and found to be significant. Interestingly, some anion exchange membranes (AEMs) show negligible NH4+ crossover, addressing the problem of measurement error due to NH4+ crossover. Further investigation of select membranes in a zero-gap gas diffusion electrode (GDE)-cell determines that most membranes show significant NH3 crossover when the cell is in an open circuit. However, uptake and crossover of NH3 are mitigated when -1.6 V is applied across the GDE-cell. The results of this study present AEMs as a useful alternative to CEMs for H-cell E-NRR and E-NO3RR electrolyzer studies and present critical insight into membrane crossover in zero-gap GDE-cell E-NRR and E-NO3RR electrolyzers.

Electrochemical pH regulation in droplet microfluidics.

We report a method for electrochemical pH regulation in microdroplets generated in a microfluidic device. The key finding is that controlled quantities of reagents can be generated electrochemically in moving microdroplets confined within a microfluidic channel. Additionally, products generated at the anode and cathode can be isolated within descendant microdroplets. Specifically, ∼5 nL water-in-oil microdroplets are produced at a T-junction and then later split into two descendant droplets. During splitting, floor-patterned microelectrodes drive water electrolysis within the aqueous microdroplets to produce H+ and OH-. This results in a change in the pHs of the descendant droplets. The droplet pH can be regulated over a range of 5.9 to 7.7 by injecting controlled amounts of charge into the droplets. When the injected charge is between -6.3 and 54.5 nC nL-1, the measured pH of the resulting droplets is within ±0.1 pH units of that predicted based on the magnitude of the injected charge. This technique can likely be adapted to electrogeneration of other reagents within microdroplets.

Filtering and continuously separating microplastics from water using electric field gradients formed electrochemically in the absence of buffer.

Here we use experiments and finite element simulations to investigate the electrokinetics within straight microchannels that contain a bipolar electrode and an unbuffered electrolyte solution. Our findings indicate that in the presence of a sufficiently high electric field, water electrolysis proceeds at the bipolar electrode and leads to variations in both solution conductivity and ionic current density along the length of the microchannel. The significance of this finding is twofold. First, the results indicate that both solution conductivity and ionic current density variations significantly contribute to yield sharp electric field gradients near the bipolar electrode poles. The key point is that ionic current density variations constitute a fundamentally new mechanism for forming electric field gradients in solution. Second, we show that the electric field gradients that form near the bipolar electrode poles in unbuffered solution are useful for continuously separating microplastics from water in a bifurcated microchannel. This result expands the potential scope of membrane-free separations using bipolar electrodes.

Interactions between Oligoethylene Glycol-Capped AuNPs and Attached Peptides Control Peptide Structure.

Peptide-functionalized nanoparticles (NPs) often rely on a well-defined peptide structure to function. Here, we report the attachment of model peptides to the ligand shell of AuNPs passivated with oligoethylene glycol (OEG). Specifically, peptides containing the repeating (LLKK)n motif plus either one or two reactive functional groups were covalently linked to OEG-capped, ∼5 nm AuNPs via the Cu+-catalyzed azide-alkyne cycloaddition reaction. This work builds on a previous study from our group in which an (LLKK)n peptide having two reactive functional groups was considered. Peptide attachment was confirmed by FTIR spectroscopy. Amino acid analysis was used to determine that 3-4 peptides were immobilized per AuNP. Circular dichroism spectroscopy revealed a structural change from random coil in solution to α-helical upon attachment to OEG-capped AuNPs. The key result of this study is that the nature of the capping layer on the AuNP surface influences peptide structure to a significant degree. Other important findings resulting from this work are that the AuNP-peptide conjugates reported here are water soluble and that the long axis of the helical peptides is oriented tangent to the AuNP surface. The latter point is important for applications involving biorecognition.

Direct Measurement of Water Permeation in Submerged Alkyl Thiol Self-Assembled Monolayers on Gold Surfaces Revealed by Neutron Reflectometry.

Self-assembled monolayers (SAMs) of alkyl thiols are frequently used to chemically functionalize gold surfaces for applications throughout materials chemistry, electrochemistry, and biotechnology. Despite this, a detailed understanding of the structure of the SAM-water interface generated from both formation and use of the SAM in an aqueous environment is elusive, and analytical measurements of the structure and chemistry of the SAM-water interface are an ongoing experimental challenge. To address this, we used neutron reflectometry (NR) to measure water association with both hydrophobic and hydrophilic SAMs under both wet and dry conditions. SAMs used for this study were made from hydrophobic decanethiol mixed with hydrophilic 11-azido-1-undecanethiol with compositions of 0-100% of the azide-terminated thiol. All SAMs were formed by conventional solution incubation of a Au substrate immersed in ethanol. Each SAM was characterized by grazing incidence angle reflection-absorption Fourier transfer infrared spectroscopy, contact angle goniometry, and electrochemical methods to confirm it was a completely formed monolayer with evidence of extensive crystalline-like domains. NR measured significant absorption of water into each SAM, ranging from 1.6 to 5.7 water molecules per alkyl thiol, when SAMs were immersed in water. Water infiltration was independent of SAM composition and terminal group hydrophilicity. These results demonstrate that water accesses defects, fluid regions, and heterogeneous domains inherent to even well-formed SAMs.

Conjugation of an α-Helical Peptide to the Surface of Gold Nanoparticles.

We are interested in functionalizing gold nanoparticles (AuNPs) with proteins using a biomimetic approach in which an intermediate peptide "glue" directs the orientation of a protein relative to the AuNP surface. The first step toward this goal is described in the present article. Specifically, we show that ∼5 nm AuNPs can be functionalized with a mixed self-assembled monolayer (SAM) consisting of oligo(ethylene glycol) alkanethiols terminated with either hydroxyl or azide groups, and that the resulting materials are stable and soluble in water. The azide groups on the surface of the AuNPs can be subsequently linked to alkyne-functionalized peptides via a copper-catalyzed azide-alkyne cycloaddition (click) reaction. Analysis of the resulting material by Fourier transform infrared and circular dichroism spectroscopy demonstrates that the peptide is covalently linked to the SAM and that it exists in an α-helical conformation. In addition to our intended purpose of using these highly structured, biomimetic materials to orient proteins, they may also be useful for applications involving interactions between nanoparticles and cells.