RESUMEN
A modular platform for facile access to 1,2,3,9-tetrahydro-4H-carbazol-4-ones (H4 -carbazolones) and 3,4-dihydrocyclopenta[b]indol-1(2H)-ones (H2 -indolones) is described. The requisite 6- and 5-membered 2-arylcycloalkane-1,3-dione precursors were readily obtained through a Cu-catalyzed arylation of 1,3-cyclohexanediones or by a ring expansion of aryl succinoin derivatives. Enolization of one carbonyl group in the diones, conversion to a leaving group, and subsequent azidation gave 2-aryl-3-azidocycloalk-2-en-1-ones. This two-step, one-pot azidation is highly regioselective with unsymmetrically substituted 2-arylcyclohexane-1,3-diones. The regioselectivity, which is important for access to single isomers of 3,3-disubstituted carbazolones, was analyzed mechanistically and computationally. Finally, a Rh-catalyzed nitrene/nitrenoid insertion into the ortho C-H bond of the aryl moiety gave the H4 -carbazolones and H2 -indolones. One carbazolone was elaborated to an intermediate reported in the total synthesis of N-decarbomethoxychanofruticosinate, (-)-aspidospermidine, (+)-kopsihainanine A. With 2-phenylcycloheptane-1,3-dione, prepared from cyclohexanone and benzaldehyde, the azidation reaction was readily accomplished. However, the Rh-catalyzed reaction unexpectedly led to a labile but characterizable azirine rather than the indole derivative. Computations were performed to understand the differences in reactivities of the 5- and 6-membered 2-aryl-3-azidocycloalk-2-en-1-ones in comparison to the 7-membered analogue, and to support the structural assignment of the azirine.
RESUMEN
Multi-enzyme biocatalytic cascades are emerging as practical routes for the synthesis of complex bioactive molecules. However, the relative sparsity of water-stable carbon electrophiles limits the synthetic complexity of molecules made from such cascades. Here, we develop a chemoenzymatic platform that leverages styrene oxide isomerase (SOI) to covert readily accessible aryl epoxides into α-aryl aldehydes through a Meinwald rearrangement. These unstable aldehyde intermediates are then intercepted with a C-C bond forming enzyme, ObiH, that catalyzes a transaldolase reaction with l-threonine to yield synthetically challenging ß-hydroxy-α-amino acids. Co-expression of both enzymes in E. coli yields a whole cell biocatalyst capable of synthesizing a variety of stereopure non-standard amino acids (nsAA) and can be produced on gram-scale. We used isotopically labelled substrates to probe the mechanism of SOI, which we show catalyzes a concerted isomerization featuring a stereospecific 1,2-hydride shift. The viability of in situ generated α-aryl aldehydes was further established by intercepting them with a recently engineered decarboxylative aldolase to yield γ-hydroxy nsAAs. Together, these data establish a versatile method of producing α-aryl aldehydes in simple, whole cell conditions and show that these intermediates are useful synthons in CâC bond forming cascades.
RESUMEN
Cross-dehydrogenative coupling reactions have been utilized to alkylate 4(3H)-quinazolinones with ethers and amides, using catalytic n-Bu4NI and t-BuOOH as oxidants. The reactions with amides represent the first examples under such conditions. Studies via inter- and intramolecular competitive experiments with protio and deuterio reactants, as well as radical inhibition experiments, provided mechanistic insight. Also, an understanding of the relative reactivities of ethers was obtained by pairwise competitions with 4(3H)-quinazolinone.
Asunto(s)
Amidas , Éteres , Catálisis , Oxidantes , QuinazolinonasRESUMEN
Enzymes from secondary metabolic pathways possess broad potential for the selective synthesis of complex bioactive molecules. However, the practical application of these enzymes for organic synthesis is dependent on the development of efficient, economical, operationally simple, and well-characterized systems for preparative scale reactions. We sought to bridge this knowledge gap for the selective biocatalytic synthesis of ß-hydroxy-α-amino acids, which are important synthetic building blocks. To achieve this goal, we demonstrated the ability of ObiH, an l-threonine transaldolase, to achieve selective milligram-scale synthesis of a diverse array of non-standard amino acids (nsAAs) using a scalable whole cell platform. We show how the initial selectivity of the catalyst is high and how the diastereomeric ratio of products decreases at high conversion due to product re-entry into the catalytic cycle. ObiH-catalyzed reactions with a variety of aromatic, aliphatic and heterocyclic aldehydes selectively generated a panel of ß-hydroxy-α-amino acids possessing broad functional-group diversity. Furthermore, we demonstrated that ObiH-generated ß-hydroxy-α-amino acids could be modified through additional transformations to access important motifs, such as ß-chloro-α-amino acids and substituted α-keto acids.
Asunto(s)
Aminoácidos/biosíntesis , Treonina/metabolismo , Transaldolasa/metabolismo , Aminoácidos/química , Catálisis , Cromatografía Liquida/métodos , Cristalografía por Rayos X , Espectrometría de Masas/métodos , Estructura Molecular , EstereoisomerismoRESUMEN
Synthetic methodology utilizing two aryne intermediates (i.e., a formal benzdiyne) enables the rapid generation of structurally complex molecules with diverse functionality. This report describes the sequential generation of two ortho-benzyne intermediates for the synthesis of 2,3-disubstituted aryl phosphonates. Aryl phosphonates have proven useful in medicinal chemistry and materials science, and the reported methodology provides a two-step route to functionally dense variants by way of 3-phosphonyl benzyne intermediates. The process begins with regioselective trapping of a 3-trifloxybenzyne intermediate by an O-silyl phosphite in an Abramov-like reaction to bond the strained Csp carbons with phosphorus and silicon. Standard aryne-generating conditions follow to convert the resulting 2-silylphenyl triflate into a 3-phosphonyl benzyne, which readily reacts with numerous aryne trapping reactants to form a variety of 2,3-difunctionalized aryl phosphonate products. DFT computational studies shed light on important mechanistic details and revealed that 3-phosphonyl benzynes are highly polarizable. Specifically, the distortion in the internal bond angles at each of the Csp atoms was strongly influenced by both the electronegativity of the phosphonate ester groups as well as the dielectric of the computational solvation model. These effects were verified experimentally as the regioselectivity of benzyl azide trapping increased with more electronegative esters and/or increasingly polar solvents. Conversely, replacing the conventional solvent, acetonitrile, with nonpolar alternatives provided attenuated or even inverted selectivities. Overall, these studies showcase new reactivity of benzyne intermediates and extend the aryne relay methodology to include organophosphonates. Furthermore, this work demonstrates that the regioselectivity of aryne trapping reactions could be tuned by simply changing the solvent.
Asunto(s)
Derivados del Benceno , Estructura Molecular , SolventesRESUMEN
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
Asunto(s)
Imagen por Resonancia Magnética , Isótopos de Carbono , Espectroscopía de Resonancia MagnéticaRESUMEN
The importance of 1,5-Oâ â â chalcogen (Ch) interactions in isochalcogenourea catalysis (Ch=O, S, Se) is investigated. Conformational analyses of N-acyl isochalcogenouronium species and comparison with kinetic data demonstrate the significance of 1,5-Oâ â â Ch interactions in enantioselective catalysis. Importantly, the selenium analogue demonstrates enhanced rate and selectivity profiles across a range of reaction processes including nitronate conjugate addition and formal [4+2] cycloadditions. A gram-scale synthesis of the most active selenium analogue was developed using a previously unreported seleno-Hugerschoff reaction, allowing the challenging kinetic resolutions of tertiary alcohols to be performed at 500â ppm catalyst loading. Density functional theory (DFT) and natural bond orbital (NBO) calculations support the role of orbital delocalization (occurring by intramolecular chalcogen bonding) in determining the conformation, equilibrium population, and reactivity of N-acylated intermediates.
RESUMEN
Boron trifluoride is observed to promote a variety of C-H insertion reactions of benzynes bearing pendant alkyl groups. Computations and various mechanistic studies indicate that BF3 engages the strained π-bond to confer carbene-like character on the adjacent, noncoordinated benzyne carbon. This represents an unprecedented catalytic role for a non-transition metal such as BF3.
Asunto(s)
Derivados del Benceno/química , Boranos/química , Metano/análogos & derivados , Catálisis , Metano/química , Estructura MolecularRESUMEN
We have studied reactions of secondary and primary alcohols with benzynes generated by the hexadehydro-Diels-Alder (HDDA) reaction. These alcohols undergo competitive addition vs dihydrogen transfer to produce aryl ethers vs reduced benzenoid products, respectively. During the latter process, an equivalent amount of oxidized ketone (or aldehyde) is formed. Using deuterium labeling studies, we determined that (i) it is the carbinol C-H and adjacent O-H hydrogen atoms that are transferred during this process and (ii) the mechanism is consistent with a hydride-like transfer of the C-H. Substrates bearing an internal trap attached to the reactive, HDDA-derived benzyne intermediate were used to probe the kinetic order of the alcohol trapping agent in the H2-transfer as well as in the alcohol addition process. The H2-transfer reaction is first order in alcohol. Our results are suggestive of a concerted H2-transfer process, which is further supported by density functional theory (DFT) computational studies and results of a kinetic isotope effect experiment. In contrast, alcohol addition to the benzyne is second order in alcohol, a previously unrecognized phenomenon. Additional DFT studies were used to further probe the mechanistic aspects of the alcohol addition process.
Asunto(s)
Alcoholes/química , Derivados del Benceno/síntesis química , Éteres/síntesis química , Derivados del Benceno/química , Éteres/química , Estructura Molecular , Teoría CuánticaRESUMEN
This protocol is intended to provide chemists who discover or make new organic compounds with a valuable tool for validating the structural assignments of those new chemical entities. Experimental ¹H and/or ¹³C NMR spectral data and its proper interpretation for the compound of interest is required as a starting point. The approach involves the following steps: (i) using molecular mechanics calculations (with, e.g., MacroModel) to generate a library of conformers; (ii) using density functional theory (DFT) calculations (with, e.g., Gaussian 09) to determine optimal geometry, free energies and chemical shifts for each conformer; (iii) determining Boltzmann-weighted proton and carbon chemical shifts; and (iv) comparing the computed chemical shifts for two or more candidate structures with experimental data to determine the best fit. For a typical structure assignment of a small organic molecule (e.g., fewer than â¼10 non-H atoms or up to â¼180 a.m.u. and â¼20 conformers), this protocol can be completed in â¼2 h of active effort over a 2-d period; for more complex molecules (e.g., fewer than â¼30 non-H atoms or up to â¼500 a.m.u. and â¼50 conformers), the protocol requires â¼3-6 h of active effort over a 2-week period. To demonstrate the method, we have chosen the analysis of the cis- versus the trans-diastereoisomers of 3-methylcyclohexanol (1-cis versus 1-trans). The protocol is written in a manner that makes the computation of chemical shifts tractable for chemists who may otherwise have only rudimentary computational experience.
Asunto(s)
Conformación Molecular , Compuestos Orgánicos/química , Bibliotecas de Moléculas Pequeñas/química , Compuestos Epoxi/química , Espectroscopía de Resonancia Magnética , Modelos Químicos , Estructura Molecular , Compuestos Policíclicos/química , Compuestos de Espiro/químicaRESUMEN
The removal of two vicinal hydrogen atoms from an alkane to produce an alkene is a challenge for synthetic chemists. In nature, desaturases and acetylenases are adept at achieving this essential oxidative functionalization reaction, for example during the biosynthesis of unsaturated fatty acids, eicosanoids, gibberellins and carotenoids. Alkane-to-alkene conversion almost always involves one or more chemical intermediates in a multistep reaction pathway; these may be either isolable species (such as alcohols or alkyl halides) or reactive intermediates (such as carbocations, alkyl radicals, or σ-alkyl-metal species). Here we report a desaturation reaction of simple, unactivated alkanes that is mechanistically unique. We show that benzynes are capable of the concerted removal of two vicinal hydrogen atoms from a hydrocarbon. The discovery of this exothermic, net redox process was enabled by the simple thermal generation of reactive benzyne intermediates through the hexadehydro-Diels-Alder cycloisomerization reaction of triyne substrates. We are not aware of any single-step, bimolecular reaction in which two hydrogen atoms are simultaneously transferred from a saturated alkane. Computational studies indicate a preferred geometry with eclipsed vicinal C-H bonds in the alkane donor.
Asunto(s)
Alcanos/química , Alquenos/química , Alquenos/síntesis química , Derivados del Benceno/química , Hidrógeno/química , Ciclización , Enlace de Hidrógeno , Hidrogenación , Isomerismo , Oxidación-ReducciónRESUMEN
The hexadehydro-Diels-Alder (HDDA) cascade enables the synthesis of complex benzenoid products with various substitution patterns through aryne intermediates. The first stage of this cascade involves the generation of a highly reactive ortho-benzyne intermediate by a net [4+2] cycloisomerization of a triyne substrate. The benzyne can be rapidly 'trapped' either intramolecularly or intermolecularly with myriad nucleophilic or π-bond-donating reactants. As a representative example of a general procedure for synthesizing highly substituted benzenoids, this protocol describes the synthesis of a typical triyne substrate and its use as the reactant in an HDDA cascade to form a phthalide. The synthetic procedure detailed herein (four chemical reactions) takes 16-20 h of active effort over a period of several days for the preparation of the triyne precursor and â¼2 h of active effort over a 3-d period for the generation and trapping of the benzyne and isolation of the phthalide product.
Asunto(s)
Derivados del Benceno/síntesis química , Reacción de Cicloadición/métodos , Benzofuranos/síntesis química , Estructura MolecularRESUMEN
Arynes (aromatic systems containing, formally, a carbon-carbon triple bond) are among the most versatile of all reactive intermediates in organic chemistry. They can be 'trapped' to give products that are used as pharmaceuticals, agrochemicals, dyes, polymers and other fine chemicals. Here we explore a strategy that unites the de novo generation of benzynes-through a hexadehydro-Diels-Alder reaction-with their in situ elaboration into structurally complex benzenoid products. In the hexadehydro-Diels-Alder reaction, a 1,3-diyne is engaged in a [4+2] cycloisomerization with a 'diynophile' to produce the highly reactive benzyne intermediate. The reaction conditions for this simple, thermal transformation are notable for being free of metals and reagents. The subsequent and highly efficient trapping reactions increase the power of the overall process. Finally, we provide examples of how this de novo benzyne generation approach allows new modes of intrinsic reactivity to be revealed.
RESUMEN
N-Acyl-2-oxazolidinones are ring-opened by lithium iodide and decarboxylated in the presence of a mild proton source. Further reaction with an amine base provides 2-oxazolines. The transformation is general for oxazolidinones unsubstituted in the 5 position and occurs under mild conditions (25-50 degrees C). These results complement the existing methods for this transformation by allowing lower temperatures and/or avoiding metal catalysts.