RESUMEN
Nano-zirconia (ZO) was synthesized using a microwave-assisted one-pot precipitation route. Two biopolymers, chitosan (CTS) and carboxymethyl cellulose were blended with ZO at different w/w ratios. The formulation with 30% w/w chitosan (ZO-CTS) was found to give enhanced uptake of F- and As(V). ZO and the most effective ZO-CTS system were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. These confirmed the formation of a composite system containing nanoparticles of 50 nm in size, in which ZO was present in the amorphous form. It was observed that the combination of ZO with CTS improved the F- and As(V) adsorption capacity most notably at pH 5.5. Fluoride adsorption by ZO-CTS followed the Freundlich isotherm model, with an adsorption capacity of 120 mg g-1. Adsorption of As(V) by ZO-CTS could be fitted with both the Langmuir and Freundlich isotherm models and was found to have a capacity of 14.8 mg g-1. Gravity filtration studies conducted for groundwater levels indicated the effectiveness of ZO-CTS in adsorbing As(V) and F- at a pH of 5.5. The ability of the ZO-CTS in removing Cd(II) and Pb(II) was also investigated, and no such enhancement was observed, and found the neat ZO was the most potent sorbent here.
RESUMEN
In this study, hydroxyapatite (HAP) nanocomposites were prepared with chitosan (HAP-CTS), carboxymethyl cellulose (HAP-CMC), alginate (HAP-ALG), and gelatin (HAP-GEL) using a simple wet chemical in situ precipitation method. The synthesized materials were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer-Emmett-Teller surface area analysis, and thermogravimetric analysis. This revealed the successful synthesis of composites with varied morphologies. The adsorption abilities of the materials toward Pb(II), Cd(II), F-, and As(V) were explored, and HAP-CTS was found to have versatile adsorption properties for all of the ions, across a wide range of concentrations and pH values, and in the presence of common ions found in groundwater. Additionally, X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy confirmed the affinity of HAP-CTS toward multi-ion mixture containing all four ions. HAP-CTS was hence engineered into a more user-friendly form, which can be used to form filters through its combination with cotton and granular activated carbon. A gravity filtration study indicates that the powder form of HAP-CTS is the best sorbent, with the highest breakthrough capacity of 3000, 3000, 2600, and 2000 mL/g for Pb(II), Cd(II), As(V), and F-, respectively. Hence, we propose that HAP-CTS could be a versatile sorbent material for use in water purification.
RESUMEN
A novel hydroxyapatite montmorillonite (HAP-MMT) nanocomposite system was synthesized using a simple wet chemical in situ precipitation method. Neat nano hydroxyapatite (HAP) was also synthesized for comparison. The characterization of the materials was carried out using Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET) isotherms to study the functional groups, morphology, crystallinity and the surface area respectively. Batch adsorption studies and kinetic studies on fluoride adsorption were conducted for the HAP-MMT system and for neat HAP. The effect of parameters such as contact time, pH, initial concentration, temperature, and thermodynamic parameters and the effect of coexisting ions on fluoride adsorption by HAP-MMT were studied. Results of the isotherm experiments were fitted to four adsorption isotherm models namely Langmuir, Freundlich, Temkin and Dubinin Radushkevich. Fluoride adsorption over HAP-MMT fitted to the Freundlich adsorption isotherm model and showed more than two-fold improved adsorption capacity (16.7 mg g-1) compared to neat HAP. The best-fitting kinetic model for both adsorbents was found to be pseudo second order. Calculated thermodynamic parameters indicated that the fluoride adsorption by HAP-MMT is more favorable compared to that on HAP within the temperature range of 27 °C-60 °C. Improved fluoride adsorption by HAP-MMT is attributed to the exfoliated nature of HAP-MMT. Gravity filtration studies carried out using a 1.5 ppm fluoride solution, which is closer to the ground water fluoride concentrations of Chronic Kidney Disease of unknown etiology (CKDu) affected areas in Sri Lanka, resulted in a 1600 ml g-1 break through volume indicating the potential of HAP-MMT to be used in real applications.