Inkjet-printed gold nanoparticle surfaces for the detection of low molecular weight biomolecules by laser desorption/ionization mass spectrometry.

Effective detection of low molecular weight compounds in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) is often hindered by matrix interferences in the low m/z region of the mass spectrum. Here, we show that monolayer-protected gold nanoparticles (AuNPs) can serve as alternate matrices for the very sensitive detection of low molecular weight compounds such as amino acids. Amino acids can be detected at low fmol levels with minimal interferences by properly choosing the AuNP deposition method, density, size, and monolayer surface chemistry. By inkjet-printing AuNPs at various densities, we find that AuNP clusters are essential for obtaining the greatest sensitivity. Graphical Abstract ᅟ.

Atmospheric emission characterization of Marcellus shale natural gas development sites.

Limited direct measurements of criteria pollutants emissions and precursors, as well as natural gas constituents, from Marcellus shale gas development activities contribute to uncertainty about their atmospheric impact. Real-time measurements were made with the Aerodyne Research Inc. Mobile Laboratory to characterize emission rates of atmospheric pollutants. Sites investigated include production well pads, a well pad with a drill rig, a well completion, and compressor stations. Tracer release ratio methods were used to estimate emission rates. A first-order correction factor was developed to account for errors introduced by fenceline tracer release. In contrast to observations from other shale plays, elevated volatile organic compounds, other than CH4 and C2H6, were generally not observed at the investigated sites. Elevated submicrometer particle mass concentrations were also generally not observed. Emission rates from compressor stations ranged from 0.006 to 0.162 tons per day (tpd) for NOx, 0.029 to 0.426 tpd for CO, and 67.9 to 371 tpd for CO2. CH4 and C2H6 emission rates from compressor stations ranged from 0.411 to 4.936 tpd and 0.023 to 0.062 tpd, respectively. Although limited in sample size, this study provides emission rate estimates for some processes in a newly developed natural gas resource and contributes valuable comparisons to other shale gas studies.

Doppler spectrum-based polar nephelometer.

The particle scattering asymmetry parameter of an ensemble of submicrometer particles, as well as the complete scattering phase function (angular distribution), is determined by measuring the Doppler spectrum of the scattered light. No calibration is required. The monitor incorporates a 532 nm laser with long coherence length, an integrating sphere to collect the scattered light, and a heterodyne (interferometric) detection scheme. Measurements of monodisperse polystyrene latex spheres and polydisperse ammonium sulfate particles indicate that the measured value of the asymmetry parameter is generally within ±0.03 of that calculated using Mie theory.

Real-time measurements of SO2, H2CO, and CH4 emissions from in-use curbside passenger buses in New York City using a chase vehicle.

The Aerodyne Mobile Laboratory "chased" in-use curbside passenger buses operated by various operators in New York City. With the cooperation of New York State's Metropolitan Transit Authority, the relationships between the emissions of the several gas-phase species and particulate loadings were investigated across several bus technologies, bus types, and fuels (diesel, ultralow sulfur diesel, and compressed natural gas, CNG). The CNG buses followed did not employ an oxidation catalyst. The buses characterized were not prescreened in any fashion and were measured while deployed on their normal in-service routes. This paper focuses on the fuel-based mass emissions of SO2, H2CO, and CH4, measured using tunable infrared laser differential absorption spectroscopy. Sulfur dioxide emissions from buses known to be burning ultralow sulfur diesel (<30 ppm(m) S) were 16 times lower than those from buses burning normal commercial diesel fuel, nominally less than 300 ppm(m) sulfur. Emissions of formaldehyde and methane from in-use CNG buses were approximately 15 times greater than those from diesel powered buses.

Real-time measurements of nitrogen oxide emissions from in-use New York City transit buses using a chase vehicle.

New diesel engine technologies and alternative fuel engines are being introduced into fleets of mass transit buses to try to meet stricter emission regulations of nitrogen oxides and particulates: Real-time instruments including an Aerodyne Research tunable infrared laser differential absorption spectrometer (TILDAS) were deployed in a mobile laboratory to assess the impact of the implementation of the new technologies on nitrogen oxide emissions in real world driving conditions. Using a "chase" vehicle sampling strategy, the mobile laboratory followed target vehicles, repeatedly sampling their exhaust. Nitrogen oxides from approximately 170 in-use New York City mass transit buses were sampled during the field campaigns. Emissions from conventional diesel buses, diesel buses with continuously regenerating technology (CRT), diesel hybrid electric buses, and compressed natural gas (CNG) buses were compared. The chase vehicle sampling method yields real world emissions that can be included in more realistic emission inventories. The NO, emissions from the diesel and CNG buses were comparable. The hybrid electric buses had approximately one-half the NOx emissions. In CRT diesels, NO2 accounts for about one-third of the NOx emitted in the exhaust, while for non-CRT buses the NO2 fraction is less than 10%.