Lateral Electron and Hole Hopping between Dyes on Mesoporous ZrO2: Unexpected Influence of Solvents with a Low Dielectric Constant.

Lateral intermolecular charge transfer between photosensitizers on metal oxide substrates is important for the understanding on the overall working principles of dye-sensitized systems. Such studies usually concentrate on either hole or electron transfer separately and are conducted in solvents with a high dielectric constant (εs) that are known, however, to show a drastic decrease of the local dielectric constant close to the metal oxide surface. In the present study, both hole and electron hopping between organic donor-acceptor photosensitizers was experimentally investigated on PB6 dye-sensitized mesoporous ZrO2 films. The donor (close to the surface) and acceptor (away from surface) subunit of the PB6 dye were observed to be involved in hole and electron hopping, respectively. Hole and electron transfer kinetics were found to differ remarkably in high-εs solvents, but similar in solvents with εs < 12. This finding indicates that low-εs solvents maintain similar local dielectric constant values close to, and further away from, the semiconductor surface, which is different from the previously observed behavior of high dielectric constant solvents at a metal oxide interface.

Charge Recombination Deceleration by Lateral Transfer of Electrons in Dye-Sensitized NiO Photocathode.

Control of charge separation and recombination is critical for dye-sensitized solar cells and photoelectrochemical cells, and for p-type cells, the latter process limits their photovoltaic performance. We speculated that the lateral electron hopping between dyes on a p-type semiconductor surface can effectively separate electrons and holes in space and retard recombination. Thus, device designs where lateral electron hopping is promoted can lead to enhanced cell performance. Herein, we present an indirect proof by involving a second dye to monitor the effect of electron hopping after hole injection into the semiconductor. In mesoporous NiO films sensitized with peryleneimide (PMI) or naphthalene diimide (NDI) dyes, dye excitation led to ultrafast hole injection into NiO from either excited PMI* (τ < 200 fs) or NDI* (τ = 1.2 ps). In cosensitized films, surface electron transfer from PMI- to NDI was rapid (τ = 24 ps). Interestingly, the subsequent charge recombination (ps-µs) with NiO holes was much slower when NDI- was generated by electron transfer from PMI- than when NDI was excited directly. We therefore indicate that the charge recombination is slowed down after the charge hopping from the original PMI sites to the NDI sites. The experimental results supported our hypothesis and revealed important information on the charge carrier kinetics for the dye-sensitized NiO photoelectrode system.

Phenoxazine-based small molecule heterojunction nanoparticles for photocatalytic hydrogen production.

A phenoxazine-based small organic molecular donor POZ-M is designed and synthesized to prepare organic heterojunction nanoparticles (NPs) with a small molecular acceptor ITIC for photocatalytic hydrogen production, giving a reaction rate of up to 63 mmol g-1 h-1. A beneficial molecular design strategy highlights the role of miscibility between POZ-M and ITIC, which is necessary to achieve satisfactory charge separation at the donor/acceptor interface.

Electron-hopping across dye-sensitized mesoporous NiO surfaces.

To gain a deeper understanding of the underlying charge processes in dye sensitized photocathodes, lateral electron hopping across dye-sensitized NiO photocathodes was investigated. For dye-sensitized systems, hole hopping across photoanodes has been studied extensively in the literature but no expansive studies on electron hopping in sensitized photocathodes exist today. Therefore, an organic p-type dye (TIP) with donor-linker-acceptor design, showing high stability and electrochemical reversibility, was used to study the electron transfer dynamics (electron-hopping) between dyes with temperature dependent spectroelectrochemistry and computational simulations. Besides intermolecular electron-hopping across the surface with a rate constant in the order of 105 s-1, our results show a second electron hopping pathway between NiO surface states with a rate constant in the order of 107 s-1, which precedes the electron hopping between the dyes. Upon application of a potential step negative enough to reduce both the dye and NiO surface states, the majority of NiO surface states need to be reduced before intermolecular electron transfer can take place. The results indicate that, in contrast to sensitized photoanodes where intermolecular charge transfer is known to influence recombination kinetics, intermolecular charge transport processes in TIP dye sensitized NiO photocathodes is less relevant because the fast electron transport between NiO surface states likely dominates recombination kinetics.

Preparation, characterization, evaluation and mechanistic study of organic polymer nano-photocatalysts for solar fuel production.

Production of renewable fuels from solar energy and abundant resourses, such as water and carbon dioxide, via photocatalytic reactions is seen as a promising strategy to adequately address the climate challenge. Photocatalytic systems based on organic polymer nanoparticles (PNPs) are seen as one avenue to transform solar energy into hydrogen and other solar fuels. Semiconducting PNPs are light-harvesting materials with exceptional optical properties, photostability, low cost and low cytotoxity, whose performance surpasses conventional organic dyes and inorganic semiconductors. This review introduces the optimization strategies for the preparation methods of PNP via cocatalyst loading and morphology tuning. We present an analysis on how the preparative methods will impact the physico-chemical properties of these materials, and thus the catalytic activity. A list of experimental techniques is presented for characterization of the physico-chemical properties (optical, morphological, electrochemical and catalytic properties) of PNPs. We provide detailed analysis of PNP photochemistry during photocatalysis with focus on the mechanistic understanding of processes of internal charge generation and transport to the catalyst. This tutorial review provides the reader with the guidelines on current strategies used to optimize PNP performance highlighting the future directions of polymer nano-photocatalysts development.

Polymer Dots as Photoactive Membrane Vesicles for [FeFe]-Hydrogenase Self-Assembly and Solar-Driven Hydrogen Evolution.

A semiartificial photosynthesis approach that utilizes enzymes for solar fuel production relies on efficient photosensitizers that should match the enzyme activity and enable long-term stability. Polymer dots (Pdots) are biocompatible photosensitizers that are stable at pH 7 and have a readily modifiable surface morphology. Therefore, Pdots can be considered potential photosensitizers to drive such enzyme-based systems for solar fuel formation. This work introduces and unveils in detail the interaction within the biohybrid assembly composed of binary Pdots and the HydA1 [FeFe]-hydrogenase from Chlamydomonas reinhardtii. The direct attachment of hydrogenase on the surface of toroid-shaped Pdots was confirmed by agarose gel electrophoresis, cryogenic transmission electron microscopy (Cryo-TEM), and cryogenic electron tomography (Cryo-ET). Ultrafast transient spectroscopic techniques were used to characterize photoinduced excitation and dissociation into charges within Pdots. The study reveals that implementation of a donor-acceptor architecture for heterojunction Pdots leads to efficient subpicosecond charge separation and thus enhances hydrogen evolution (88 460 µmolH2·gH2ase-1·h-1). Adsorption of [FeFe]-hydrogenase onto Pdots resulted in a stable biohybrid assembly, where hydrogen production persisted for days, reaching a TON of 37 500 ± 1290 in the presence of a redox mediator. This work represents an example of a homogeneous biohybrid system combining polymer nanoparticles and an enzyme. Detailed spectroscopic studies provide a mechanistic understanding of light harvesting, charge separation, and transport studied, which is essential for building semiartificial photosynthetic systems with efficiencies beyond natural and artificial systems.

Towards sustainable and efficient p-type metal oxide semiconductor materials in dye-sensitised photocathodes for solar energy conversion.

In order to meet the ever-growing global energy demand for affordable and clean energy, it is essential to provide this energy by renewable resources and consider the eco-efficiency of the production and abundance of the utilised materials. While this is seldom discussed in the case of technologies still in the research stage, addressing the issue of sustainability is key to push research in the right direction. Here we provide an overview of the current p-type metal oxide semiconductor materials in dye-sensitised photocathodes, considering element abundance, synthetic methods and large scale fabrication as well as the underlying physical properties that are necessary for efficient solar harvesting devices.

An Indacenodithieno[3,2-b]thiophene-Based Organic Dye for Solid-State p-Type Dye-Sensitized Solar Cells.

An indacenodithieno[3,2-b]thiophene (IDTT) unit is used as a linker moiety to design a new p-type dye-TIP-for solid-state p-type dye-sensitized solar cells. Solar cells based on the TIP dye offered an efficiency of 0.18 % with an open-circuit photovoltage of 550 mV and a short-circuit photocurrent density of 0.86 mA cm-2 , which is better than those of two reference dyes, PB6 and BH4. Charge lifetime experiments reveal that the IDTT linker-based TIP dye significantly suppresses charge recombination losses in the devices.