Sodium Carbazolide and Derivatives as Solid-State Electrolytes for Sodium-Ion Batteries.

Replacing widely used organic liquid electrolytes with solid-state electrolytes (SSEs) could effectively solve the safety issues in sodium-ion batteries. Efforts on seeking novel solid-state electrolytes have been continued for decades. However, issues about SSEs still exist, such as low ionic conductivity at ambient temperature, difficulty in manufacturing, low electrochemical stability, poor compatibility with electrodes, etc. Here, sodium carbazolide (Na-CZ) and its THF-coordinated derivatives are rationally fabricated as Na+ conductors, and two of their crystal structures are successfully solved. Among these materials, THF-coordinated complexes exhibit fast Na+ conductivities, i.e., 1.20×10-4  S cm-1 and 1.95×10-3  S cm-1 at 90 °C for Na-CZ-1THF and Na-CZ-2THF, respectively, which are among the top Na+ conductors under the same condition. Furthermore, stable Na plating/stripping is observed even over 400 h cycling, showing outstanding interfacial stability and compatibility against Na electrode. More advantages such as ease of synthesis, low-cost, and cold pressing for molding can be obtained. In situ NMR results revealed that the evaporation of THF may play an essential role in the Na+ migration, where the movement of THF creates defects/vacancies and facilitates the migration of Na+ .

Deforming lanthanum trihydride for superionic conduction.

With strong reducibility and high redox potential, the hydride ion (H-) is a reactive hydrogen species and an energy carrier. Materials that conduct pure H- at ambient conditions will be enablers of advanced clean energy storage and electrochemical conversion technologies1,2. However, rare earth trihydrides, known for fast H migration, also exhibit detrimental electronic conductivity3-5. Here we show that by creating nanosized grains and defects in the lattice, the electronic conductivity of LaHx can be suppressed by more than five orders of magnitude. This transforms LaHx to a superionic conductor at -40 °C with a record high H- conductivity of 1.0 × 10-2 S cm-1 and a low diffusion barrier of 0.12 eV. A room-temperature all-solid-state hydride cell is demonstrated.

Fabrication of Lithium Indolide and Derivates for Ion Conduction.

The development of ionic conductors as solid-state electrolytes to replace the widely used liquid electrolytes could effectively solve the safety issues as well as enhance the energy density of batteries. Yet no ionic conductors to date could meet all the criteria of solid-state electrolytes for practical applications. Therefore, exploration of new materials is highly demanded. Herein, a new type of metalorganic-based materials, namely, lithium indolide and its tetrahydrofuran (THF)-coordinated derivatives, are developed and employed as fast ionic conductors. Their crystal structures are also determined. Particularly, the lithium indolide ditetrahydrofuran shows ionic conductivities of 6.28 × 10-6 and 8.27 × 10-4 S cm-1 at 110 and 150 °C, respectively. A "neutral ligand-assisted" cation migration mechanism is proposed, where the migration of Li+ may be facilitated by the dynamic equilibrium of the neutral ligand and the large sized anions. The present idea of using metalorganic compounds coordinated with neutral ligands for fast ionic conductors provides vast opportunities for discovering new solid-state electrolytes in the future thanks to the rich chemistry of organic anions and ligands.

Transition Metal-Free Hydrogenolysis of Anilines to Arenes Mediated by Lithium Hydride.

Hydrodenitrogenation (HDN) of nitrogen-containing organic compounds such as aniline and its derivatives is of scientific interest and practical importance. Major efforts have been devoted to the development and understanding of transition metal-mediated chemical processes. Herein, we report a fundamentally different strategy using a transition metal-free material, that is, lithium hydride (LiH) enabling the hydrogenolysis of aniline to benzene and ammonia via a chemical looping approach. Aniline reacts with LiH to form lithium anilide, and subsequently, the hydrogenolysis of lithium anilide yields benzene and ammonia and regenerates LiH to complete the loop. This LiH-mediated chemical looping HDN process stands in sharp contrast to the transition metal-catalyzed or -mediated processes, which commonly lead to the complete hydrogenation of aromatic rings. A highly denitrogenated product formation rate of 2623 µmol·g-1·h-1 is achieved for the hydrogenolysis of lithium anilide at 300 °C and 10 bar H2, which exceeds the catalytic rate of transition metal catalysts. Computational studies reveal that the scission of C-N bonds is facilitated by a Li-mediated nucleophilic attack of hydride to the α-sp2C atom of aniline. This work not only provides a distinctive chemical looping route for HDN, but also opens up materials space for the denitrogenation of anilines.

Insights into the Mechanism of Metal-Catalyzed Transformation of Oxime Esters: Metal-Bound Radical Pathway vs Free Radical Pathway.

Controlling of radical reactivity by binding a radical to the metal center is an elegant strategy to overcome the challenge that radical intermediates are "too reactive to be selective". Yet, its application has seemingly been limited to a few strained-ring substrates, azide compounds, and diazo compounds. Meanwhile, first-row transition-metal-catalyzed (mainly, Fe, Ni, Cu) transformations of oxime esters have been reported recently in which the activation processes are assumed to follow free-radical mechanisms. In this work, we show by means of density functional theory calculations that the activation of oxime esters catalyzed by Fe(II) and Cu(I) catalysts more likely affords a metal-bound iminyl radical, rather than the presumed free iminyl radical, and the whole process follows a metal-bound radical mechanism. The as-formed metal-bound radical intermediates are an Fe(III)-iminyl radical (Stotal = 2, SFe = 5/2, and Siminyl = -1/2) and a Cu(II)-iminyl radical (Stotal = 0, SCu = 1/2, and Siminyl = -1/2). The discovery of such novel substrates affording metal-bound radical intermediates may facilitate the experimental design of metal-catalyzed asymmetric synthesis using oxime esters to achieve the desired enantioselectivity.

Enabling Semihydrogenation of Alkynes to Alkenes by Using a Calcium Palladium Complex Hydride.

Selective hydrogenation of alkynes to alkenes requires a catalytic site with suitable electronic properties for modulating the adsorption and conversion of alkyne, alkene as well as dihydrogen. Here, we report a complex palladium hydride, CaPdH2, featured by electron-rich [PdH2]δ- sites that are surrounded by Ca cations that interacts with C2H2 and C2H4 via σ-bonding to Pd and unusual cation-π interaction with Ca, resulting in a much weaker chemisorption than those of Pd metal catalysts. Concomitantly, the dissociation of H2 and hydrogenation of C2Hx (x = 2-4) species experience significant energy barriers over CaPdH2, which is fundamentally different from those reported Pd-based catalysts. Such a unique catalytic environment enables CaPdH2, the very first complex transition-metal hydride catalyst, to afford a high alkene selectivity for the semihydrogenation of alkynes.

Auto-classification of biomass through characterization of their pyrolysis behaviors using thermogravimetric analysis with support vector machine algorithm: case study for tobacco.

BACKGROUND: During the biomass-to-bio-oil conversion process, many studies focus on studying the association between biomass and bio-products using near-infrared spectra (NIR) and chemical analysis methods. However, the characterization of biomass pyrolysis behaviors using thermogravimetric analysis (TGA) with support vector machine (SVM) algorithm has not been reported. In this study, tobacco was chosen as the object for biomass, because the cigarette smoke (including water, tar, and gases) released by tobacco pyrolysis reactions decides the sensory quality, which is similar to biomass as a renewable resource through the pyrolysis process. RESULTS: SVM algorithm has been employed to automatically classify the planting area and growing position of tobacco leaves using thermogravimetric analysis data as the information source for the first time. Eighty-eight single-grade tobacco samples belonging to four grades and eight categories were split into the training, validation, and blind testing sets. Our model showed excellent performances in both the training and validation set as well as in the blind test, with accuracy over 91.67%. Throughout the whole dataset of 88 samples, our model not only provides precise results on the planting area of tobacco leave, but also accurately distinguishes the major grades among the upper, lower, and middle positions. The error only occurs in the classification of subgrades of the middle position. CONCLUSIONS: From the case study of tobacco, our results validated the feasibility of using TGA with SVM algorithm as an objective and fast method for auto-classification of tobacco planting area and growing position. In view of the high similarity between tobacco and other biomasses in the compositions and pyrolysis behaviors, this new protocol, which couples the TGA data with SVM algorithm, can potentially be extrapolated to the auto-classification of other biomass types.

Pharmacological Targeting of Vacuolar H+-ATPase via Subunit V1G Combats Multidrug-Resistant Cancer.

Multidrug resistance (MDR) in cancer remains a major challenge for the success of chemotherapy. Natural products have been a rich source for the discovery of drugs against MDR cancers. Here, we applied high-throughput cytotoxicity screening of an in-house natural product library against MDR SGC7901/VCR cells and identified that the cyclodepsipeptide verucopeptin demonstrated notable antitumor potency. Cytological profiling combined with click chemistry-based proteomics revealed that ATP6V1G directly interacted with verucopeptin. ATP6V1G, a subunit of the vacuolar H+-ATPase (v-ATPase) that has not been previously targeted, was essential for SGC7901/VCR cell growth. Verucopeptin exhibited strong inhibition of both v-ATPase activity and mTORC1 signaling, leading to substantial pharmacological efficacy against SGC7901/VCR cell proliferation and tumor growth in vivo. Our results demonstrate that targeting v-ATPase via its V1G subunit constitutes a unique approach for modulating v-ATPase and mTORC1 signaling with great potential for the development of therapeutics against MDR cancers.

xOPBE: A Specialized Functional for Accurate Prediction of 13C Chemical Shifts.

In this study, we present a new hybrid functional denoted as xOPBE, which is optimized at the 6-311+G(2d,p) basis set and designed with a specific aim of providing accurate 13C chemical shifts. By mixing the Hartree-Fock exchange into the OPBE functional, xOPBE provides a significantly improved overall performance as compared to its parent OPBE functional, while OPBE was shown previously as an excellent functional for 13C chemical shifts. Even in the case of the 1-adamantyl cation, for which OPBE completely fails in reproducing the experimental results, xOPBE still performs very well with similar accuracy as the standard CCSD(T) method with a large basis set. Our results also demonstrate that xOPBE not only can improve quantitatively the description of the correct assignments given by OPBE but also can revert OPBE's incorrect assignments qualitatively. Thus, we would like to recommend the use of xOPBE for routine evaluations of 13C chemical shifts.

Biosynthesis and Chemical Diversification of Verucopeptin Leads to Structural and Functional Versatility.

A synthesis program for structurally complex macrocycles is very challenging. Herein, we propose a biosynthesis pathway of the pyranylated cyclodepsipeptide verucopeptin to make enough supply and to diversify verucopeptin by genetic manipulation and one-step semisynthesis. The synthesis relies on the intrinsic reactivity of the interchangeable hemiketal pyrane and opened keto along with adjacent alkene. Biological evaluation of verucopeptin-oriented analogs delivers a potent AMP-activated protein kinase (AMPK) agonist, antibacterial agent, and selective NFκB modulator.

High noise margin decoding of holographic data page based on compressed sensing.

In holographic data storage systems, the quality of the reconstructed data pattern is decisive and directly affects the system performance. However, noise from the optical component, electronic component and recording material deteriorates reconstruction quality. A high noise margin decoding method developed from compressed sensing technology was proposed to reduce the impact of noise in the decoding process. Compared with the conventional threshold decoding method, the proposed method is more robust to noise and more suitable for multilevel modulation. The decoding performance with five-level amplitude modulation was evaluated by both simulation and experimentation. For the combination of Gaussian noise, Rician noise and Rayleigh noise, the proposed decoding method reduces the BER of the threshold method to one-sixth with an SNR of -1 in the simulation. In the experiment, it behaves up to 8.3 times better than conventional threshold decoding.

Plasmon-hybridization-induced optical torque between twisted metal nanorods.

We present a numerical study of optical torque between two twisted metal nanorods due to the angular momentum of the electromagnetic field emerging from their plasmonic coupling. Our results indicate that the interaction optical torque on the nanorods can be strongly enhanced by their plasmon coupling, which highly depends on not only the gap size but also the twisted angle between the nanorods. The behaviors of the optical torque are different between two plasmon coupling modes: hybridized bonding and anti-bonding modes with different resonances. The rotations of the twisted nanorods with the bonding and anti-bonding mode excitations lead to mutually parallel and perpendicular alignments, respectively. At an incident intensity of 10 mW/µm2, the rotational potential depths are more than 30 times as large as the Brownian motion energy, enabling the optical alignments with angle fluctuations less than ∼±10°. Thus, this optical alignment of the nanoparticles with the plasmon coupling allows dynamic control of the plasmonic characteristics and functions.

Sodium anilinide-cyclohexylamide pair: synthesis, characterization, and hydrogen storage properties.

The lack of efficient hydrogen storage material is one of the bottlenecks for the large-scale implementation of hydrogen energy. Here, a series of new hydrogen storage materials, i.e., anilinide-cyclohexylamide pairs, are proposed via the metallation of an aniline-cyclohexylamine pair. DFT calculations show that the enthalpy change of hydrogen desorption (ΔHd) can be significantly tuned from 60.0 kJ per mol-H2 for the pristine aniline-cyclohexylamine pair to 42.2 kJ per mol-H2 for sodium anilinide-cyclohexylamide and 38.7 kJ per mol-H2 for potassium anilinide-cyclohexylamide, where an interesting correlation between the electronegativity of the metal and the ΔHd was observed. Experimentally, the sodium anilinide-cyclohexylamide pair was successfully synthesised with a theoretical hydrogen capacity of 4.9 wt%, and the hydrogenation and dehydrogenation cycle can be achieved at a relatively low temperature of 150 °C in the presence of commercial catalysts, in clear contrast to the pristine aniline-cyclohexylamine pair which undergoes dehydrogenation at elevated temperatures.

Chemoselectivity in Gold(I)-Catalyzed Propargyl Ester Reactions: Insights From DFT Calculations.

Au-catalyzed propargyl ester reactions have been investigated by a comprehensive density functional theory (DFT) study. Our calculations explain the experimental observed chemoselectivity of Au-catalyzed propargyl ester reactions very well by considering all possible pathways both in the absence and presence of 1,2,3-triazole (TA). The "X-factor" of TA is disclosed to have triple effects on this reaction. First of all, it can stabilize and prevent rapid decomposition of the Au catalyst. Secondly, the existence of TA promotes the nucleophilic attack and alters the chemoselectivity of this reaction. Moreover, TA acts as a "relay" to promote the proton transfer.

Single-handed supramolecular double helix of homochiral bis(N-amidothiourea) supported by double crossed C-I···S halogen bonds.

The natural DNA double helix consists of two strands of nucleotides that are held together by multiple hydrogen bonds. Here we propose to build an artificial double helix from fragments of two strands connected by covalent linkages therein, but with halogen bonding as the driving force for self-assembling the fragments to the double helix. We succeed in building such a double helix in both solution and solid state, by using a bilateral N-(p-iodobenzoyl)alanine based amidothiourea which in its folded cis-form allows double and crossed C-I···S halogen bonds that lead to right- or left-handed double helix when the two alanine residues are of the same L,L- or D,D-configuration. The double helix forms in dilute CH3CN solution of the micromolar concentration level, e.g., 5.6 µM from 2D NOESY experiments and exhibits a high thermal stability in solution up to 75 °C, suggesting cooperative and thereby strong intermolecular double crossed halogen bonding that makes the double helix stable. This is supported by the observed homochiral self-sorting in solution.

Reversible Hydrogen Uptake/Release over a Sodium Phenoxide-Cyclohexanolate Pair.

Hydrogen uptake and release in arene-cycloalkane pairs provide an attractive opportunity for on-board and off-board hydrogen storage. However, the efficiency of arene-cycloalkane pairs currently is limited by unfavorable thermodynamics for hydrogen release. It is shown here that the thermodynamics can be optimized by replacement of H in the -OH group of cyclohexanol and phenol with alkali or alkaline earth metals. The enthalpy change upon dehydrogenation decreases substantially, which correlates with the delocalization of the oxygen electron to the benzene ring in phenoxides. Theoretical calculations reveal that replacement of H with a metal leads to a reduction of the HOMO-LUMO energy gap and elongation of the C-H bond in the α site in cyclohexanolate, which indicates that the cyclohexanol is activated upon metal substitution. The experimental results demonstrate that sodium phenoxide-cyclohexanolate, an air- and water-stable pair, can desorb hydrogen at ca. 413 K and 373 K in the solid form and in an aqueous solution, respectively. Hydrogenation, on the other hand, is accomplished at temperatures as low as 303 K.

Metal-catalyzed alkyne oxidation/CH functionalization: Effects of oxidant, temperature, and metal catalyst on chemoselectivity.

Gold-catalyzed intermolecular alkyne oxidation has attracted much synthetic attention, but mostly suffering undesired over-oxidation. Recent experiments demonstrated that over-oxidation could be dramatically suppressed in zinc(II)-catalyzed intermolecular alkyne oxidation/CH functionalization. By means of first-principle density functional theory calculations, we explored the mechanism of the M-catalyzed intermolecular alkyne oxidations (M = Zn(OTf)2 and Au+ PR3 ) as well as the effects of oxidants, temperature, and metal catalysts on chemoselectivity, in an effort to disclose the origin of the extraordinary chemoselectivity pertaining to zinc catalysis. Our calculations indicate that the Zn-catalyzed intermolecular alkyne oxidation/CH functionalization proceeds by a Friedel-Crafts alkylation mechanism rather than metal carbene insertion mechanism. The chemoselectivity of CH functionalization against over-oxidation in Zn catalysis, in comparison with gold catalysis, can be jointly controlled by four factors: (1) the use of less nucleophilic N-oxide, (2) the enhanced electrophilicity and carbocationic nature of the carbenic site in the α-oxo metal carbenoid intermediate, (3) enhanced steric repulsion to incoming oxidant exerted by bulky ancillary ligand in the close nearby of the carbenic site to disfavor intermolecular over-oxidation and (4) the large negative value of activation entropy in the intermolecular over-oxidation pathway, that jointly give rise to lower activation free energy for the intramolecular cyclization/CH functionalization pathway than for the intermolecular over-oxidation pathway. © 2018 Wiley Periodicals, Inc.

Volume holographic recording in Al nanoparticles dispersed phenanthrenequinone-doped poly(methyl methacrylate) photopolymer.

High-performance material plays a crucial role in holographic data storage, which is a noteworthy technology with potential applications in the field of high capacity data storage. We report on a new kind of holographic storage material based on aluminum nanoparticles (Al NPs) dispersed phenanthrenequinone-doped poly(methyl methacrylate) (PQ/PMMA) photopolymer. Al NPs are efficiently synthesized in a monomer solvent using laser ablation in liquids without chemical precursors. It is shown that an increase in diffraction efficiency and recording sensitivity is achieved in both traditional holography and polarization holography by doping with Al NPs. After 4 h of ablation, the new material exhibited an improvement in the diffraction efficiency for both traditional holography and polarization holography from 2.85% to 57.15% and from 0.6% to 4.07%, respectively. We also investigated the image recording and reconstruction performance for both traditional and polarization holography and the results indicate that the proposed material has noticeable potential as a holographic storage material. Additionally, it also possesses excellent potential for holographic position multiplexing recording. We conclude that laser ablation in a liquid is a promising option for processing low-cost nano-doped holographic storage material.

Accurate prediction of nuclear magnetic resonance shielding constants: An extension of the focal-point analysis method for magnetic parameter calculations (FPA-M) with improved efficiency.

Previously, we have proposed a method, FPA-M, for focal-point analysis of magnetic parameter calculations [Sun et al., J. Chem. Phys. 138, 124113 (2013)], where the shielding constants at equilibrium geometries σe are calculated with the second order Møller-Plesset perturbation (MP2) approach, which are extrapolated to the complete basis set (CBS) limit and then augmented by the [σe(CCSD(T)) - σe(MP2)] difference at a valence triple-ζ (VTZ) basis set, where CCSD(T) stands for the coupled cluster singles and doubles model with a perturbative correction for triple excitations. This FPA-M(MP2) method provides satisfactory results to approach to the corresponding CCSD(T)/CBS values for elements of the first two rows in the periodic tables. A series of extensions have been explored here, which replace the MP2/CBS with the Hartree-Fock (HF)/CBS for efficiency. In particular, the [σe(CCSD(T)) - σe(MP2)] VTZ difference is replaced by a step-wise correction from the [σe(CCSD(T)) - σe(MP2)] difference at a valence double-ζ basis set plus the [σe(MP2) - σe(HF)] VTZ difference, leading to a new scheme, denoted here as FPA-M(HF'). A systematical comparison has demonstrated that the FPA-M(HF') method provides an excellent balance between accuracy and efficiency, which makes routinely accurate calculations of the shielding constants for medium-sized organic molecules and biomolecules feasible.

Improving the polarization-holography performance of PQ/PMMA photopolymer by doping with THMFA.

Increasing photosensitizer concentration has been considered as an effective approach to improve the performance of holographic material. In this paper, we report on new method for increasing the saturated dissolvability of photosensitizer PQ within polymeric media by introducing copolymerization monomer into the PQ/PMMA. The photosensitizer concentration of PQ was increased from 0.7wt% to 1.3wt%, compared with the typical PQ/PMMA sample. Besides, we investigated performance of polarization holographic recordings in typical PQ/PMMA and copolymerization monomer-containing PQ/PMMA with the orthogonally polarized signal and reference waves. And the doping of THFMA component resulted in a significant improvement of diffraction intensity and photosensitivity. In addition, high-quality holographic image reconstruction was realized in our home-made material.