Laser cleaning of dirty grease on steel sluice cables.

Steel cables used to raise sluices require a layer of corrosion-resistant grease, which must be periodically replaced. It is time-consuming and laborious, and conventional manual cleaning, mechanical cleaning, and chemical cleaning methods have many drawbacks. In this paper, a nanosecond pulsed fiber laser is used to clean hardened surface grease from such cables. An experimental system was designed to study the effects of parameters such as the laser power, scanning speed, cleaning frequency, and defocusing amount. Macroscopic and microstructural observations were conducted on the surfaces of steel cables before and after cleaning using cameras, optical microscopy, scanning electron microscopy, and energy dispersive spectrometry. With the optimal parameters, laser cleaning can effectively remove hardened grease from steel cable surfaces without damaging the galvanized layer and the steel wire matrix. Ablation, gasification, and evaporation are the main mechanisms by which grease and dirt are removed. This study lays a foundation for optimizing the laser cleaning of steel sluice cables at work sites.

Superstretchable Liquid-Metal Electrodes for Dielectric Elastomer Transducers and Flexible Circuits.

Dielectric elastomer transducers (DETs), with a dielectric elastomer (DE) film sandwiched between two compliant electrodes, are highly sought after in the fields of soft robotics, energy harvesting, and human-machine interaction. To achieve a high-performance DET, it is essential to develop electrodes with high conductivity, strain-insensitive resistance, and adaptability. Herein, we design an electrode (Supra-LMNs) based on multiple dynamic bond cross-linked supramolecular networks (Ns) and liquid metal (LM), which realizes high conductivity (up to 16,000 S cm-1), negligible resistance changes at high strain (1.3-fold increase at 1000% strain), instantaneous self-healability at ambient temperature, and rapid recycling. The conductive pathway can be activated through simple friction by transmitting stress through the silver nanowires (AgNWs) and cross-linking sites of LM particles. This method is especially attractive for printing circuits on flexible substrates, especially DE films. Utilized as dielectric elastomer generator (DEG) electrodes, it reduces the charge loss by 3 orders of magnitude and achieves high generating energy density and energy conversion efficiency on a low-resistance load. Additionally, serving as sensor (DES) and actuator (DEA) electrodes, it enables a highly sensitive sensing capability and complex interaction.

Quantitative evaluation of artifact expression in conebeam computed tomography of mesoporous calcium silicate nanoparticles as a promising root canal sealer.

OBJECTIVES: We aimed to quantitatively compare the area and volume of artifacts in cone beam computed tomography produced by mesoporous calcium silicate nanoparticles (MCSNs), AH Plus sealer, and iRoot SP sealer when used as root canal sealers. METHODS: We prepared 40 single-rooted mandibular premolars and divided them into an MCSN sealer group, an AH Plus sealer group, an iRoot SP sealer group, and a no-sealer (control) group. We filled the canals with gutta-percha using the single-cone method and subjected them to conebeam computed tomography before and after the placement of root fillings using the same exposure parameters. We evaluated the images to quantify the areas of hyperdense and hypodense artifacts and non-affected teeth and reconstructed 3-dimensional image models of the materials to study volume distortion artifacts. RESULTS: The MCSN sealer group produced a significantly smaller hyperdense and volume distortion artifacts than the AH Plus and iRoot SP groups (P < .01), but the area and volume of hypodense artifacts did not differ significantly among the groups (P > .05). CONCLUSIONS: When used as a root canal sealer, MCSNs generate a significantly smaller area and volume of hyperdense artifacts than AH Plus and iRoot SP sealers. By significantly reducing the generation of high-density artifacts, MCSNs may facilitate the evaluation of root canal filling quality and the diagnosis of root canal abnormalities.

High Energy Harvesting Performances Silicone Elastomer via Filling Soft Dielectric with Stretching Deformability.

Dielectric elastomer generators (DEGs) with high generated energy density and high conversion efficiency are of great interest. Among several dielectric elastomers (DEs), silicone elastomer filled with ceramic fillers have been extensively studied for their high elasticity, insulation, and permittivity. However, the stretched breakdown strength (Ebs ) of such composites decreases significantly under large strain, thus sharply reduces its energy harvesting performances. In this study, a polar rubber-based dielectric (GNBR) is synthetized and creatively used as "soft filler" for silicone elastomer. Benefiting from the deformability under stretching and its inherent strong interface bonding with silicone elastomer, this soft filler effectively avoids the formation of weak interface under large strain and reduces the local field strength of interface area. As expected, the composite filled with soft filler (GNBR/PMVS) shows enhanced Ebs of 2.8 times that of composite with traditional hard filler (TiO2 /PMVS) under equibiaxial strain of 200%. As a result, GNBR/PMVS composite exhibits maximum energy density of 130.5 mJ g-1 with up-to-date highest power conversion efficiency of reported DEG (44.5%). The findings will provide new insights in the rational design of DE composites characterized by high stretched breakdown strength for advanced energy harvesting system.

Multilayer Dielectric Elastomer with Reconfigurable Electrodes for Artificial Muscle.

High-performance multilayer dielectric elastomer actuators (DEAs) are well-positioned to overcome the insufficient output force and energy density as artificial muscles. However, due to the fabrication process, the multilayer DEAs with nonmodifiable structures often suffer from the limitation of short lifespans and scalable preparation. Herein, reusable multilayer DEAs with the detachable and reconfigurable structure are fabricated. This is achieved by realizing scalable compliant electrodes using the continuous spatial confining forced network assembly (CSNA) method and combining the vacuum lamination (VL) approach to have good attachability and detachability with the VHB dielectric elastomer. The flexible roller-based CSNA method is used to prepare the large area compliant electrodes composed of α, ω-dihydroxy polydimethylsiloxane and electrically conductive nanoparticles. The fabricated electrodes can continuously work over 10 000 cycles at 40% strained stretching and maintain smooth surfaces to construct multilayer DEAs. Moreover, owing to the detachable configuration of the DEAs, the electrodes can also be recovered and reused for building new actuators. The lower limb assistive device is demonstrated by detachable multilayer spring roll DEAs, achieving approximately 3.1 degrees of flexion and extension movement of knee models under a voltage of 7 kV. The detachable and reconfigurable multilayer DEAs shed new light on the applications of wearable assistive devices.

Preparation of Polytetrafluoroethylene Superhydrophobic Materials by Femtosecond Laser Processing Technology.

In recent years, superhydrophobic surfaces have attracted significant attention due to their promising applications, especially in ice prevention, reduction in air resistance, and self-cleaning. This study utilizes femtosecond laser processing technology to prepare different surface microstructures on polytetrafluoroethylene (PTFE) surfaces. Through experiments, it investigates the relationship between the solid-liquid contact ratio and surface hydrophobicity. The shape of water droplets on different microstructure surfaces is simulated using ANSYS, and the relationship between surface microstructures and hydrophobicity is explored in the theoretical model. A superhydrophobic surface with a contact angle of up to 166° was obtained by machining grooves with different spacings in polytetrafluoroethylene sheets with femtosecond laser technology. Due to the micro- and nanostructures on the surface, the oleophobicity of the processed oleophilic PTFE surface is enhanced.

Effect of noise on hearing loss among workers in a fastener manufacturing enterprise / 预防医学

Objective @#To investigate the current status of hearing loss in a fastener manufacturing enterprise, and to analyze its influencing factors, so as to provide insights into occupational disease prevention and control. @*Methods@#The occupational health examination data of noise exposed workers and the workplace occupational disease hazard factors detection data in a fastener manufacturing enterprise in Jiaxing City in 2022 were collected through the Occupational Disease and Occupational Health Hazard Factors Detection System of China Disease Prevention and Control Information System, and factors affecting the development of high-frequency noise-induced hearing loss (HFNIHL) and speech-frequency noise-induced hearing loss (SFNIHL) were analyzed. @*Results@#Totally 625 workers were investigated, with a median age of 44.00 (interquartile range, 13.00) years and a median length of service of 8.00 (interquartile range, 9.00) years, and including 519 men (83.04%) and 106 women (16.96%). There were 309 workers with single noise exposure (49.44%) and 316 workers with joint noise exposure (50.56%), and 518 workers exposed to noise with the normalized continuous A-weighted sound pressure level equivalent to a 40 h working week (LEX,40 h) that exceeded the national standard (82.88%). The detection rates of HFNIHL and SFNIHL were 49.12% and 35.04%, respectively. Multivariable logistic regression analysis indicated that males (OR=10.528, 95%CI: 5.271-21.025), length of service of 10 years and longer (OR=2.451, 95%CI: 1.599-3.759), LEX,40 h of >85 dB (A) (OR=2.227, 95%CI: 1.318-3.764) and joint noise exposure (OR=3.002, 95%CI: 2.080-4.334) were associated with an increased risk of HFNIHL, and male (OR=9.400, 95%CI: 4.211-20.985), LEX,40 h of >85 dB (A) (OR=2.305, 95%CI: 1.345-3.951), and joint noise exposure (OR=3.880, 95%CI: 2.677-5.623) were associated with an increased risk of SFNIHL.@*Conclusion@#Gender, length of service, noise intensity and exposure mode are factors affecting the risk of HFNIHL, while gender, noise intensity and exposure mode are factors affecting the risk of SFNIHL.

Ultrasonic-Assisted Method for the Preparation of Carbon Nanotube-Graphene/Polydimethylsiloxane Composites with Integrated Thermal Conductivity, Electromagnetic Interference Shielding, and Mechanical Performances.

Due to the rapid development of the miniaturization and portability of electronic devices, the demand for polymer composites with high thermal conductivity and mechanical flexibility has significantly increased. A carbon nanotube (CNT)-graphene (Gr)/polydimethylsiloxane (PDMS) composite with excellent thermal conductivity and mechanical flexibility is prepared by ultrasonic-assisted forced infiltration (UAFI). When the mass ratio of CNT and Gr reaches 3:1, the thermal conductivity of the CNT-Gr(3:1)/PDMS composite is 4.641 W/(m·K), which is 1619% higher than that of a pure PDMS matrix. In addition, the CNT-Gr(3:1)/PDMS composite also has excellent mechanical properties. The tensile strength and elongation at break of CNT-Gr(3:1)/PDMS composites are 3.29 MPa and 29.40%, respectively. The CNT-Gr/PDMS composite also shows good performance in terms of electromagnetic shielding and thermal stability. The PDMS composites have great potential in the thermal management of electronic devices.

Prevalence and correlation of C-shaped root canals of mandibular premolars and molars in Eastern Chinese individuals.

The aim of this study was to investigate the prevalence, correlation, and differences of C-shaped root canals (CSRCs) morphology in permanent mandibular premolars and molars in Eastern Chinese individuals using cone-beam computed tomography (CBCT). A total of 8000 mandibular first premolars (MFPs), mandibular second premolars (MSPs), mandibular first molars (MFMs), and mandibular second molars (MSMs) CBCT images from 1000 patients (692 females and 308 males) were collected. The prevalence, correlation, bilateral/unilateral presence, the morphology of CSRCs, level of canal bifurcation, gender differences, and location of radicular grooves (RGs) were evaluated. The prevalence of CSRCs in MFPs, MSPs, MFMs and MSMs were 10.25%, 0.25%, 0.55% and 47.05%, respectively. The prevalence of CSRCs in MFPs of males was higher than that in females, while the prevalence of CSRCs in MSMs of females was higher than that in males (P < 0.05). The bilateral symmetry presence of CSRCs in MSMs was significant but not in MFPs, MSPs, and MFMs. RGs were predominantly found on the mesiolingual (ML) surface of premolars and the lingual surface of molars. There was a high prevalence of CSRCs in MFPs and MSMs in the Eastern Chinese population, but there was no correlation. The prevalence of CSRCs in MFPs and MSMs differ significantly by gender (P < 0.05).

The accuracy of using guided endodontics in access cavity preparation and the temperature changes of root surface: An in vitro study.

BACKGROUND: Guided endodontics is a successful technique that has been gradually applied to endodontic therapy in recent years without being affected by the operator's experience. However, the guided bur produces excessive heat during continuous rotation and friction with root canal walls, it is not clear whether the degree of temperature increase may lead to the periodontal ligament and alveolar bone damage. METHODS: A total of 58 teeth were used, of which 40 teeth were not grouped, all used to evaluate the accuracy. 40 single-rooted premolars were scanned using CBCT and an intra-oral scanner, and 3D-printed guided plates were made with the pre-designed access. A custom-made guided bur was used to prepare the access cavities. The postoperative CBCT data and pre-designed pathways were matched to evaluate the deviation between the planned and virtual paths. The other 18 teeth were randomly divided into three groups (ET20 and ProTaper F3 as the control group, guided endodontics as the test group), with 6 teeth in each group. The temperature changes on the root surfaces were inspected with a thermocouple thermometer. RESULTS: The average deviation on the tip and the base of the bur was 0.30 mm and 0.28 mm (mesial/distal), and 0.28 mm and 0.25 mm (buccal/lingual). The average angle deviation was 3.62°. The mean root surface temperature rise of the guided endodontics group was the lowest (5.07 °C) (P < 0.05). CONCLUSIONS: The access cavity preparation performed with guided endodontics has feasible accuracy and low-temperature rise on the root surfaces. Due to the limitations of the study, whether it has high reliability and safety in clinical applications needs to be further studied in vivo.

Mesoporous Calcium-Silicate Nanoparticles Loaded with Prussian Blue Promotes Enterococcus Faecalis Ferroptosis-Like Death by Regulating Bacterial Redox Pathway ROS/GSH.

Background: Mesoporous calcium-silicate nanoparticles (MCSNs) are advanced biomaterials that have been used to control drug delivery for many years. Ultrasmall Prussian blue nanoparticles (UPBNPs) showed high peroxidase and catalase-like activities. This study evaluated the antibacterial and antibiofilm properties, mechanism and cytotoxicity of UPBNPs-MCSNs composites synthesized by both as precursors. Methods: UPBNPs-MCSNs were prepared and characterized. The antibacterial effect of UPBNPs-MCSNs was evaluated by the MTT assay and CFU counting method, and their biosafety was tested by CCK8. Then explore the antibacterial mechanism, including TEM observation of bacterial morphology, and detection of bacterial ROS, LPO and GSH levels. The antibiofilm activity of UPBNPs-MCSNs was tested by E. faecalis biofilm model in human roots. The roots were pretreated with materials and cultured with E. faecalis, and the survival of E. faecalis on the root canal wall was observed by SEM and CLSM. Results: The results showed that UPBNPs-MCSNs had potent antibacterial and antibiofilm activities. They can aggregate on the dentin surface and significantly inhibit E. faecalis adhesion and colonization. Their antibacterial activity is as effective as NaClO and calcium hydroxide (CH), can significantly prolong the time of bacterial colonization than CH, but have lower cytotoxicity to normal cells. We found that UPBNPs-MCSNs trigger a like classic ferroptosis pathway in bacteria. UPBNPs-MCSNs can induce bacteria to produce ROS and LPO, and reduce GSH level. Moreover, we observed that the metal ions chelator and the antioxidant could block their antibacterial activity. Conclusion: These results reveal that UPBNPS-MCSNs have high antibacterial and antibiofilm, and can mediate the bacterial redox pathway ROS/GSH like the classical pathway of ferroptosis, providing a theoretical basis for them to develop into a safe and effective novel root canal disinfectant.

A Glycosyltransferase-Related Signature for Predicting Overall Survival in Head and Neck Squamous Cell Carcinoma.

Background: Here, we establish a prognostic signature based on glycosyltransferase-related genes (GTRGs) for head and neck squamous cell carcinoma (HNSCC) patients. Methods: The prognostic signature of GTRGs was constructed via univariate and multivariate Cox analyses after obtaining the expression patterns of GTRGs from the TCGA. A nomogram based on the signature and clinical parameters was established to predict the survival of each HNSCC patient. Potential mechanisms were explored through gene set enrichment analysis (GSEA) and immune cell infiltration, immune checkpoints, immunotherapy, and tumor mutational burden (TMB) analyses. The expression differences and prognostic efficacy of the signature were verified through the gene expression omnibus (GEO) and several online databases. Results: The prognostic signature was constructed based on five glycosyltransferases (PYGL, ALG3, EXT2, FUT2, and KDELC1) and validated in the GSE65858 dataset. The pathways enriched in the high- and low-risk groups were significantly different. The high-risk group had higher tumor purity; lower infiltration of immune cells, such as CD8+ T cells and Tregs; higher cancer-associated fibroblast (CAF) infiltration; lower immune function; and lower checkpoint expression. The signature can also be applied to distinguish whether patients benefit from immunotherapy. In addition, the high-risk group had a higher TMB and more gene mutations, including those in TP53, CSMD1, CDKN2A, and MUC17. Conclusion: We propose a prognostic signature based on glycosyltransferases for HNSCC patients that may provide potential targets and biomarkers for the precise treatment of HNSCC.

[Preparation and transdermal effect of a tip-loaded bubble-soluble microneedle].

As a new transdermal drug delivery technology, bubble microneedle could achieve painless and precise drug delivery, which has attracted great attention from researchers. In order to improve the utilization rate of the drug carried by microneedle, we proposed a method for preparing a tip-loaded bubble-soluble microneedle. During the molding process of the microneedle, air bubbles were formed in the needle body, and the drug was concentrated on the needle tip. The preparation process of the bubble microneedle was optimized. The effects of foaming agent concentration, drying temperature, and solution viscosity on the forming of bubble microneedles were explored. Furthermore, the transdermal effect of the product was analyzed. The experimental results showed that the bubble microneedle forming process was stable, with the forming rate above 90% and the forming cycle shortened to about 4 h. The drug was mainly concentrated on the tip of the microneedle, with a length of 180 µm, and the length of the bubble was 250 µm. Moreover, the microneedle array can create microchannels on the mouse skin, and the needle bodies can be rapidly dissolved within 5 min. The bubble microneedle could rapidly release about 48% of the drug within 1 min and about 91% of the drug within 5 min. The bubble microstructure of the microneedle array hindered the diffusion of the drug to the substrate, which improves the utilization rate of the drug. This study provides a technical basis for the practical application of microneedle for transdermal drug delivery.

Intracellular reactive oxygen species trigger mitochondrial dysfunction and apoptosis in cadmium telluride quantum dots-induced liver damage.

Quantum dots (QDs), also known as semiconductor QDs, have specific photoelectricproperties which find application in bioimaging, solar cells, and light-emitting diodes (LEDs). However, the application of QDs is often limited by issues related to health risks and potential toxicity. The purpose of this study was to provide evidence regarding the safety of cadmium telluride (CdTe) QDs by exploring the detailed mechanisms involved in its hepatotoxicity. This study showed that CdTe QDs can increase reactive oxygen species (ROS) in hepatocytes after being taken up by hepatocytes, which triggers a significant mitochondrial-dependent apoptotic pathway, leading to hepatocyte apoptosis. CdTe QDs-induce mitochondrial cristae abnormality, adenosine triphosphate (ATP) depletion, and mitochondrial membrane potential (MMP) depolarization. Meanwhile, CdTe QDs can change the morphology, function, and quantity of mitochondria by reducing fission and intimal fusion. Importantly, inhibition of ROS not only protects hepatocyte viability but can also interfere with apoptosis and activation of mitochondrial dysfunction. Similarly, the exposure of CdTe QDs in Institute of Cancer Research (ICR) mice showed that CdTe QDs caused oxidative damage and apoptosis in liver tissue. NAC could effectively remove excess ROS could reduce the level of oxidative stress and significantly alleviate CdTe QDs-induced hepatotoxicity in vivo. CdTe QDs-induced hepatotoxicity may originate from the generation of intracellular ROS, leading to mitochondrial dysfunction and apoptosis, which was potentially regulated by mitochondrial dynamics. This study revealed the nanobiological effects of CdTe QDs and the intricate mechanisms involved in its toxicity at the tissue, cell, and subcellular levels and provides information for narrowing the gap between in vitro and in vivo animal studies and a safety assessment of QDs.

TFEB-lysosome pathway activation is associated with different cell death responses to carbon quantum dots in Kupffer cells and hepatocytes.

BACKGROUND: Carbon dot has been widely used in biomedical field as a kind of nanomaterial with low toxicity and high biocompatibility. CDs has demonstrated its unique advantages in assisted drug delivery, target diagnosis and targeted therapy with its small size and spontaneous fluorescence. However, the potential biosafety of CDs cannot be evaluated. Therefore, we focused on the study of liver, the target organ involved in CDs metabolism, to evaluate the risk of CDs in vitro. METHODS AND RESULTS: Liver macrophage KUP5 cells and normal liver cells AML12 cells were incubated in CDs at the same concentration for 24 h to compare the different effects under the same exposure conditions. The study found that both liver cell models showed ATP metabolism disorder, membrane damage, autophagosome formation and lysosome damage, but the difference was that, KUP5 cells exhibited more serious damage than AML12 cells, suggesting that immunogenic cell type is particularly sensitive to CDs. The underlying mechanism of CDs-induced death of the two hepatocyte types were also assessed. In KUP5 cells, death was caused by inhibition of autophagic flux caused by autophagosome accumulation, this process that was reversed when autophagosome accumulation was prevented by 3-MA. AML12 cells had no such response, suggesting that the accumulation of autophagosomes caused by CDs may be specific to macrophages. CONCLUSION: Activation of the TFEB-lysosome pathway is important in regulating autophagy and apoptosis. The dual regulation of ERK and mTOR phosphorylation upstream of TFEB influences the death outcome of AML12 cells. These findings provide a new understanding of how CDs impact different liver cells and contribute to a more complete toxicological safety evaluation of CDs.

Utilization of Melt Fracture Phenomenon for the Preparation of Shark Skin Structured Hydrophobic Film.

With the application of biomimetic shark skin microstructures with hydrophobicity in microfluidics, sensors and self-cleaning materials, microstructure processing methods are increasing. The preparation process has higher requirements for processing cost and efficiency. In this paper, linear low-density polyethylene (LLDPE) hydrophobic films were prepared with the help of melt fracture phenomenon. The equipment is a self-made single screw extruder. By adjusting the process parameters, the biomimetic shark skin structured LLDPE films with good hydrophobic property can be obtained. The surface microstructure shape of the product is related to kinds of additive, die temperature and screw speed. When AC5 was selected as an additive, the optimal processing parameter was found to be 160 °C die temperature and 80 r/min screw speed. A contact angle of 133° was obtained in this situation. In addition, the influences of die temperature and screw speed on the size of shark skin structure were also systematically investigated in this paper. It was found that the microstructure surface with hierarchical roughness had a better hydrophobic property.

Reactive oxygen species trigger NF-κB-mediated NLRP3 inflammasome activation involvement in low-dose CdTe QDs exposure-induced hepatotoxicity.

Cadmium telluride (CdTe) quantum dots (QDs) can be employed as imaging and drug delivery tools; however, the toxic effects and mechanisms of low-dose exposure are unclear. Therefore, this pioneering study focused on hepatic macrophages (Kupffer cells, KCs) and explored the potential damage process induced by exposure to low-dose CdTe QDs. In vivo results showed that both 2.5 µM/kg·bw and 10 µM/kg·bw could both activate KCs to cause liver injury, and produce inflammation by disturbing antioxidant levels. Abnormal liver function further verified the risks of low-dose exposure to CdTe QDs. The KC model demonstrated that low-dose CdTe QDs (0 nM, 5 nM and 50 nM) can be absorbed by cells and cause severe reactive oxygen species (ROS) production, oxidative stress, and inflammation. Additionally, the expression of NF-κB, caspase-1, and NLRP3 were decreased after pretreatment with ROS scavenging agent N-acetylcysteine (NAC, 5 mM pretreated for 2 h) and the NF-κB nuclear translocation inhibitor Dehydroxymethylepoxyquinomicin (DHMEQ, 10 µg/mL pretreatment for 4 h) respectively. The results indicate that the activation of the NF-κB pathway by ROS not only directly promotes the expression of inflammatory factors such as pro-IL-1ß, TNF-α, and IL-6, but also mediates the assembly of NLRP3 by ROS activation of NF-κB pathway, which indirectly promotes the expression of NLRP3. Finally, a high-degree of overlap between the expression of the NF-κB and NLRP3 and the activated regions of KCs, further support the importance of KCs in inflammation induced by low-dose CdTe QDs.

Toxicokinetics and systematic responses of differently sized indium tin oxide (ITO) particles in mice via oropharyngeal aspiration exposure.

Indium tin oxide (ITO) is an important semiconductor material, because of increasing commercial products consumption and potentially exposed workers worldwide. So, urgently we need to assess and manage potential health risks of ITO. Although the Occupational Exposure Limit (OEL) has been established for ITO exposure, there is still a lack of distinguishing the risks of exposure to particles of different sizes. Therefore, obtaining toxicological data of small-sized particles will help to improve its risk assessment data. Important questions raised in quantitative risk assessments for ITO particles are whether biodistribution of ITO particles is affected by particle size and to what extent systematic adverse responses is subsequently initiated. In order to determine whether this toxicological paradigm for size is relevant in ITO toxic effect, we performed comparative studies on the toxicokinetics and sub-acute toxicity test of ITO in mice. The results indicate both sized-ITO resided in the lung tissue and slowly excreted from the mice, and the smaller size of ITO being cleared more slowly. Only a little ITO was transferred to other organs, especially with higher blood flow. Two type of ITO which deposit in the lung mainly impacts respiratory system and may injure liver or kidney. After sub-acute exposure to ITO, inflammation featured by neutrophils infiltration and fibrosis with both dose and size effects have been observed. Our findings revealed toxicokinetics and dose-dependent pulmonary toxicity in mice via oropharyngeal aspiration exposure, also replenish in vivo risk assessment of ITO. Collectively, these data indicate that under the current OEL, there are potential toxic effects after exposure to the ITO particles. The observed size-dependent biodistribution patterns and toxic effect might be important for approaching the hazard potential of small-sized ITO in an occupational environment.

Toxicity of electronic cigarettes: A general review of the origins, health hazards, and toxicity mechanisms.

Electronic cigarettes (E-cigarette) are an alternative for traditional cigarette smokers to quit smoking. Based on the current understanding, electronic cigarettes have rapidly become popular among existing smokers and former non-smokers. However, increasing research at different levels reveals that e-cigarettes are unsafe. This review provides an overview of the toxicology of e-cigarettes based on existing in vivo and in vitro studies and compares their toxicity with that of traditional cigarettes. Moreover, we describe the associated toxicity components in e-cigarettes, as well as the potential mechanism by which e-cigarettes exert toxic effects. As is known to all, the nicotine in traditional cigarettes and e-cigarettes has certain toxicity. Besides, a few studies have shown that propylene glycol and vegetable glycerin mixture and flavoring agents in e-cigarettes also are the key components causing adverse effects in animals or cells. There is insufficient scientific evidence on the toxicity of e-cigarettes due to the lack of standardized research methods, prompting the need to conduct a comprehensive toxicity assessment of e-cigarette toxicity to elucidate the safety issues of e-cigarettes. Eventually, a basis for decision-making on whether people use e-cigarettes will be obtained.

Mitochondrial dynamics and mitophagy involved in MPA-capped CdTe quantum dots-induced toxicity in the human liver carcinoma (HepG2) cell line.

Quantum dots (QDs) are nanoparticles of inorganic semiconductors and have great promise in various applications. Many studies have indicated that mitochondria are the main organelles for the distribution and toxic effects of QDs. However, the underlying mechanism of QDs interacting with mitochondria and affecting their function is unknown. Here, we report the mechanism of toxic effects of 3-mercaptopropionic acid (MPA)-capped CdTe QDs on mitochondria. Human liver carcinoma (HepG2) cells were exposed to 25, 50 and 100 µmol/L of MPA-capped CdTe QDs. The results indicated that MPA-capped CdTe QDs inhibited HepG2 cell proliferation and increased the extracellular release of LDH in a concentration-dependent manner. Furthermore, MPA-capped CdTe QDs caused reactive oxygen species (ROS) generation and cell damage through intrinsic apoptotic pathway. MPA-capped CdTe QDs can also lead to the destruction of mitochondrial cristae, elevation of intracellular Ca2+ levels, decreased mitochondrial transmembrane potential and ATP production. Finally, we showed that MPA-capped CdTe QDs inhibited mitochondrial fission, mitochondrial inner membrane fusion and mitophagy. Taken together, MPA-capped CdTe QDs induced significant mitochondrial dysfunction, which may be caused by imbalanced mitochondrial fission/fusion and mitophagy inhibition. These findings provide insights into the regulatory mechanisms involved in MPA-capped CdTe QDs-induced mitochondrial dysfunction.