Bioprotective Respirator Assembled by Defective Carbon Nitride for Long-Term Light Triggered Health Protection.

Wearing face masks is the best way to stop the spread of respiratory infections. However, if masks are not sterilized, changing them too frequently can actually increase the risk of cross-contamination. Herein, the construction of an antipathogen photocatalytic mask with carbon vacancy-modified carbon nitride nanosheets (g-C3N4-VC Ns) coated on the non-woven fabrics of the out layer of the mask, offering effective and long-term protection against damaging pathogens when exposed to light is reported. The introduced carbon vacancies are found capable of creating energy-disordered sites and inducing energetic electric force to overcome the Coulomb interactions between electron-hole pairs, thus promoting the electron-hole separation to achieve a high generation of reactive oxygen species (ROS). Thanks to its high activity in generating ROS upon exposure to light, the as-prepared photocatalytic mask shows high pathogen sterilization performance. This, in turn, prolongs the mask's protective lifetime, decreases the need for regular replacement, and decreases medical waste production. The work demonstrated here opens new viewpoints in designing pathogens biocidal protective devices for health protection, offering significant promise in specific environment self-protection.

Restricted reaction of layered double hydroxide nanoparticles with phosphate in a confined microsphere space.

Over the past decades, considerable efforts have been made to find useful solutions for phosphate pollution control. The state transition of nanomaterials from freely dispersed to encapsulated provides a realizable route for their application in phosphate elimination. The separation convenience offered by encapsulation has been widely recognized, however, the unique binding mode of nanostructures and phosphate in the confined space remains unclear, limiting its further development. Here, carboxymethyl cellulose (CMC) microspheres were used as hosts to deploy layered double hydroxide (LDH) nanoparticles. On this basis, we described an attempt to explore the adsorption behavior of LDH and phosphate in the microsphere space. Compared to their freely dispersed analogues, LDH particles exhibited higher structural stability, wider pH adaptability, and better phosphate selectivity when spatially confined in the CMC microsphere. Nevertheless, the kinetic process was severely inhibited by three orders of magnitude. Besides, the saturated phosphate adsorption capacity was also reduced to 74.6 % of the freely dispersed system. A combinative characterization revealed that the highly electronegative CMC host not only causes electrostatic repulsion to phosphate, but also extracts the electron density of the metal center of LDH, weakening its ability to act as a Lewis acid site for phosphate binding. Meanwhile, the microsphere encapsulation also hinders the ion exchange function of interlayer anions and phosphate. This study offers an objective insight into the reaction of LDH and phosphate in the confined microsphere space, which may contribute to the advanced design of encapsulation strategies for nanoparticles.

Improved Dewaterability of Waste Activated Sludge by Fe(II)-Activated Potassium Periodate Oxidation.

Fe(II)-activated potassium periodate (KIO4) oxidation was used to improve the dewaterability of waste-activated sludge for the first time. Compared with those of raw sludge, the capillary suction time (CST), specific resistance filtration (SRF), and water content of filter cake (WC) of sludge treated using the Fe(II)/KIO4 process under the optimal conditions (i.e., the initial pH = 6.8, KIO4 dose = 1.4 mmol/g volatile suspended solids, Fe(II)/KIO4 molar ratio = 1.2) decreased by 64.34%, 84.13%, and 6.69%, respectively. For conditioned sludge flocs, the Zeta potential and particle size were increased, and hydrophilic proteins in extracellular polymeric substances (EPS) were partly degraded, accompanied by the transformation of tightly bound EPS into soluble EPS and the conversion of dense sludge flocs into loose and porous ones. During Fe(II)/KIO4 oxidation, Fe(IV) and the accompanying •OH were determined as the predominant reactive species and the underlying mechanism of sludge EPS degradation was proposed. This work provides a prospective method for conditioning the sludge dewaterability.

Highly Efficient Degradation of Tetracycline Hydrochloride in Water by Oxygenation of Carboxymethyl Cellulose-Stabilized FeS Nanofluids.

The transformation of organic pollutants by stabilized nano-FeS in oxic conditions is far less understood than in anoxic states. Herein, carboxymethyl cellulose-stabilized FeS (CMC-FeS) nanofluids are prepared at a CMC-to-FeS mass ratio of 1/2 and their performance of tetracycline hydrochloride (TC) degradation under oxic conditions was investigated. Here, we showed that TC could be efficiently removed by oxygenation of CMC-FeS nanofluids at neutral initial pH. We found that CMC-FeS dosages as low as 15 mg/L can achieve the TC removal efficiency as high as 99.1% at an initial TC concentration of 50 mg/L. Oxidative degradation plays a predominated role in TC removal (accounting for 58.0%), adsorption has the second importance (accounting for 37.0%), and reduction has minor impact (accounting for 4.1%) toward TC removal. Electron spin resonance assays, fluorescent detection using coumarin as a probe, and radical scavenging experiments confirm that hydroxy radicals (•OH), both in free and surface-bound forms, contribute to oxidation of TC. Humic acids brought detrimental effects on TC removal and therefore should be biologically degraded in advance. This work offers a facile and cost-effective solution to decontaminate TC in natural and engineered water bodies.

Carbon Quantum Dots-Functionalized UiO-66-NH2 Enabling Efficient Infrared Light Conversion of 5-Hydroxymethylfurfuryl with Waste Ethanol into 5-Ethoxymethylfurfural.

The catalytic etherification of 5-hydroxymethylfurfural (HMF) with the waste ethanol into high-energy-density 5-ethoxymethylfurfural (EMF) has been considered as a promising way to simultaneously alleviate the energy crisis and environmental pollution. However, the energy consumption is rather high as the synthesis of EMF requires a high temperature to open the etherification reaction. Herein, we demonstrate a clever design and construction of acidified biomass-derived carbon quantum dots (BCQDs)-modified UiO-66-NH2 that is immobilized on cermasite (H+/BCQDs/UiO-66-NH2@ceramsite), which can use the IR light as driven energy and wasted ethanol to trigger the catalytic conversion of HMF into EMF. The temperature on the surface of the immobilized catalyst could reach as high as 139 °C within 15 min IR irradiation. Due to the aforementioned advantages, the as-prepared catalyst exhibited excellent IR-triggered catalytic performance toward EMF production, where the EMF yields and selectivity were as high as 45% and 65%, respectively. The high catalytic performance originates from the outstanding photo-to-thermal conversion by the introduction of BCQDs, as well as the strong interactions between BCQDs and UiO-66-NH2 that boosts the etherification reactions. The immobilization of catalyst on cermasite not only benefits catalyst recycling, but more importantly reduces catalyst loss during practical applications. The conceptual study shown here provides new viewpoints in designing energy-effective materials for the conversion of wastes into high-value-added resources.