Aqueous Developable and CO2-Sourced Chemical Amplification Photoresist with High Performance.

Seeking high-performance photoresists is an important item for semiconductor industry due to the continuous miniaturization and intelligentization of integrated circuits. Polymer resin containing carbonate group has many desirable properties, such as high transmittance, acid sensitivity and chemical formulation, thus serving as promising photoresist material. In this work, a series of aqueous developable CO2-sourced polycarbonates (CO2-PCs) were produced via alternating copolymerization of CO2 and epoxides bearing acid-cleavable cyclic acetal groups in the presence of tetranuclear organoborane catalyst. The produced CO2-PCs were investigated as chemical amplification resists in deep ultraviolet (DUV) lithography. Under the catalysis of photogenerated acid, the acetal (ketal) groups in CO2-PC were hydrolysed into two equivalents of hydroxyl groups, which change the exposed area from hydrophobicity to hydrophilicity, thus enabling the exposed area to be developed with water. Through normalized remaining thickness analysis, the optimal CO2-derived resist achieved a remarkable sensitivity of 1.9 mJ/cm2, a contrast of 7.9, a favorable resolution (750 nm, half pitch), and a good etch resistance (38 % higher than poly(tert-butyl acrylate)). Such performances outperform commercial KrF and ArF chemical amplification resists (i.e., polyhydroxystyrene-derived and polymethacrylate-based resists), which endows broad application prospects in the field of DUV (KrF and ArF) and extreme ultraviolet (EUV) lithography for nanomanufacturing.

Insights into the Distinct Behaviors between Bifunctional and Binary Organoborane Catalysts through Terpolymerization of Epoxide, CO2, and Anhydride.

Alkyl borane compounds-mediated polymerizations have expanded to Lewis pair polymerization, free radical polymerization, ionic ring-opening polymerization, and polyhomologation. The bifunctional organoborane catalysts that contain the Lewis acid and ammonium or phosphonium salt in one molecule have demonstrated superior catalytic performance for ring-opening polymerization of epoxides and ring-opening copolymerization of epoxides and CO2 than their two-component analogues, i.e., the blend of organoborane and ammonium or phosphonium salt. To explore the origin of the differences of the one-component and two-component organoborane catalysts, here we conducted a systematic investigation on the catalytic performances of these two kinds of organoborane catalysts via terpolymerization of epoxide, carbon dioxide and anhydride. The resultant terpolymers produced independently by bifunctional and binary organoborane catalyst exhibited distinct microstructures, where a series of gradient polyester-polycarbonate terpolymers with varying polyester content were afforded using the bifunctional catalyst, while tapering diblock terpolymers were obtained using the binary system. The bifunctional catalyst enhances the competitiveness of CO2 insertion than anhydride, which leads to the premature incorporation of CO2 into the polymer chains and ultimately results in the formation of gradient terpolymers. DFT calculations revealed the role of electrostatic interaction and charge distribution caused by intramolecular synergistic effect for bifunctional organoborane catalyst.

Organoboron-mediated polymerizations.

The scientific community has witnessed extensive developments and applications of organoboron compounds as synthetic elements and metal-free catalysts for the construction of small molecules, macromolecules, and functional materials over the last two decades. This review highlights the achievements of organoboron-mediated polymerizations in the past several decades alongside the mechanisms underlying these transformations from the standpoint of the polymerization mode. Emphasis is placed on free radical polymerization, Lewis pair polymerization, ionic (cationic and anionic) polymerization, and polyhomologation. Herein, alkylborane/O2 initiating systems mediate the radical polymerization under ambient conditions in a controlled/living manner by careful optimization of the alkylborane structure or additives; when combined with Lewis bases, the selected organoboron compounds can mediate the Lewis pair polymerization of polar monomers; the bicomponent organoboron-based Lewis pairs and bifunctional organoboron-onium catalysts catalyze ring opening (co)polymerization of cyclic monomers (with heteroallenes, such as epoxides, CO2, CO, COS, CS2, episulfides, anhydrides, and isocyanates) with well-defined structures and high reactivities; and organoboranes initiate the polyhomologation of sulfur ylides and arsonium ylides providing functional polyethylene with different topologies. The topological structures of the produced polymers via these organoboron-mediated polymerizations are also presented in this review mainly including linear polymers, block copolymers, cyclic polymers, and graft polymers. We hope the summary and understanding of how organoboron compounds mediate polymerizations can inspire chemists to apply these principles in the design of more advanced organoboron compounds, which may be beneficial for the polymer chemistry community and organometallics/organocatalysis community.

A Binary Silicon-Centered Organoboron Catalyst with Superior Performance to That of Its Bifunctional Analogue.

This work reported that a silicon-centered alkyl borane/ammonium salt binary (two-component) catalyst exhibits much higher activity than its bifunctional analogue (one-component) for the ring-opening polymerization of propylene oxide, showing 7.3 times the activity of its bifunctional analogue at a low catalyst loading of 0.01 mol %, and even 15.3 times the activity at an extremely low loading of 0.002 mol %. By using 19 F NMR spectroscopy, control experiments, and theoretical calculation we discovered that the central silicon atom displays appropriate electron density and a larger intramolecular cavity, which is useful to co-activate the monomer and to deliver propagating chains, thus leading to a better intramolecular synergic effect than its bifunctional analogue. A unique two-pathway initiation mode was proposed to explain the unusual high activity of the binary catalytic system. This study breaks the traditional impression of the binary Lewis acid/nucleophilic catalyst with poor activity because of the increase in entropy.

Extended-Surface Thin-Film Platinum Electrocatalysts with Tunable Nanostructured Morphologies.

Reducing platinum group metal (PGM) loadings in fuel cells and electrolyzers is paramount for cost reductions and getting hydrogen to scale to help decarbonize the global economy. Conventional PGM nanoparticle-based ink-cast electrocatalysts lose performance at high current densities owing to mass transport resistances that arise due to the use of ionomer binders. Herein, we report the development of binder-free extended-surface thin-film platinum electrocatalysts with tunable nanoscale morphology and periodic spacing. The electrocatalysts are prepared by sputtering various loadings of platinum on Al2O3 nanostructures templated from self-assembled block copolymer (BCP) thin films on glassy carbon substrates. Testing for oxygen reduction on a rotating disk electrode setup with ultralow PGM loadings (5.8 µgPt cm-2) demonstrates electrocatalyst performance that rivals commercial platinum electrocatalysts in terms of mass activity (380 mA mgPt-1 at 0.9 V vs RHE) while surpassing commercial catalysts in terms of stability (mass activity loss: 11-13% after 20,000 potential cycles). Moreover, catalyst performance probed as a function of nanoscale feature size and morphology reveals an inverse correlation between feature size and electroactivity, as well as the superiority of cylindrical morphologies over lamellae, presenting BCP templating as a fabrication pathway toward stable, tunable catalyst geometries.

Sequence-Reversible Construction of Oxygen-Rich Block Copolymers from Epoxide Mixtures by Organoboron Catalysts.

Switchable catalysis, in combination with epoxide-involved ring-opening (co)polymerization, is a powerful technique that can be used to synthesize various oxygen-rich block copolymers. Despite intense research in this field, the sequence-controlled polymerization from epoxide congeners has never been realized due to their similar ring-strain which exerts a decisive influence on the reaction process. Recently, quaternary ammonium (or phosphonium)-containing bifunctional organoboron catalysts have been developed by our group, showing high efficiency for various epoxide conversions. Herein, we, for the first time, report an operationally simple pathway to access well-defined polyether-block-polycarbonate copolymers from mixtures of epoxides by switchable catalysis, which was enabled through thermodynamically and kinetically preferential ring-opening of terminal epoxides or internal epoxides under different atmospheres (CO2 or N2) using one representative bifunctional organoboron catalyst. This strategy shows a broad substrate scope as it is suitable for various combinations of terminal epoxides and internal epoxides, delivering corresponding well-defined block copolymers. NMR, MALDI-TOF, and gel permeation chromatography analyses confirmed the successful construction of polyether-block-polycarbonate copolymers. Kinetic studies and density functional theory calculations elucidate the reversible selectivity between different epoxides in the presence/absence of CO2. Moreover, by replacing comonomer CO2 with cyclic anhydride, the well-defined polyether-block-polyester copolymers can also be synthesized. This work provides a rare example of sequence-controlled polymerization from epoxide mixtures, broadening the arsenal of switchable catalysis that can produce oxygen-rich polymers in a controlled manner.

Highly Selective Preparation and Depolymerization of Chemically Recyclable Poly(cyclopentene carbonate) Enabled by Organoboron Catalysts.

Poly(cyclopentene carbonate) (PCPC) produced by copolymerization of CO2 and cyclopentene oxide (CPO) is a promising but challenging chemical recyclable polymer that has high potential in minimizing plastic pollution and maximizing CO2 utilization. Currently, problems remain to be solved, include low reactivity of toxic metal catalysts, inevitable byproducts, and especially the ambiguous mechanism understanding. Herein, we present the first metal-free access to PCPC by using a series of modular dinuclear organoboron catalysts. PCPC was afforded in an unprecedented catalytic efficiency of 1.0 kg of PCPC/g of catalyst; while the depolymerization of PCPC abides by a combination pathway of random chain scission and chain unzipping, returning CPO in near-quantitative yield (>99 %). The preparation and depolymerization of PCPC along with in depth understanding of related mechanisms would be helpful for further development of advanced catalysts and recyclable plastics.

Insights into Thiourea-Based Bifunctional Catalysts for Efficient Conversion of CO2 to Cyclic Carbonates.

The bifunctional thiourea catalyst system with both electrophilic and nucleophilic centers has been certified to be effective for fixing CO2 under mild reaction conditions; however, many questions remain, especially concerning the relationship between structure and performance. Herein, we systematically studied a series of such bifunctional catalysts with different chain lengths, nucleophilic anions, and substituents, which impact obvious influence on the catalytic performance. The activation energies of catalysts with different chain lengths are calculated via in situ IR. On this basis, we disclosed for the first time that the spacer length of tetramethylene -(CH2)6- is the optimal spatial effect for the coupling of epoxides and CO2. Particularly, the single crystal X-ray diffraction analysis of the molecular structures of the bifunctional catalyst C8 indicated the discovery of the existence of interaction force between the sulfur atom on the thiourea group and one hydrogen atom on the benzene ring, as well as the intermolecular hydrogen bonding interaction of the bromide (Br-) and two NH groups on the thiourea group. The catalyst structure performance, direct observation of the crystal structure, the thermodynamic study, and a wide range of substrates (12 examples) should be informative on the optimization of the existing catalysts or the design of new catalysts in the future.

One-Pot Construction of Sulfur-Rich Thermoplastic Elastomers Enabled by Metal-Free Self-Switchable Catalysis and Air-Assisted Coupling.

Construction of well-defined sulfur-rich macromolecules in a facile manner is an interesting but challenging topic. Herein, we disclose how to readily construct well-defined triblock sulfur-rich thermoplastic elastomers via a self-switchable isothiocyanate/episulfide copolymerization and air-assisted oxidative coupling strategy. During self-switchable polymerization, alternating copolymerization of isothiocyanate and episulfide occurs initially due to the lower energy barrier for isothiocyanate insertion with respect to successive episulfide ring-opening. After exhaustion of isothiocyanate, ring-opening polymerization of episulfide begins, providing diblock polymers. Subsequent exposure of the reaction to air leads to a transformation of diblock copolymers into triblock thermoplastic elastomers. This protocol can be extended to diverse isothiocyanates and episulfides, allowing fine-tuning of the performance of the produced sulfur-rich thermoplastic elastomers.

Modular Organoboron Catalysts Enable Transformations with Unprecedented Reactivity.

ConspectusElectron-deficient boron-based catalysts with metal-free but metallomimetic characteristics provide a versatile platform for chemical transformations. However, their catalytic performance is usually lower than that of the corresponding metal-based catalysts. Furthermore, many elaborate organoboron compounds are produced via time-consuming multistep syntheses with low yields, presenting a formidable challenge for large-scale applications of these catalysts. Given this context, the development of organoboron catalysts with the combined advantages of high efficiency and easy preparation is of critical importance.Therefore, we envisioned that the construction of a dynamic Lewis multicore system (DLMCS) by integrating the Lewis acidic boron center(s) and a Lewis basic ammonium salt in one molecule would be particularly efficient for on-demand applications because of the intramolecular synergistic effect. This Account summarizes our recent efforts in developing modular organoboron catalysts with unprecedented activities for several chemical transformations. A series of mono-, di-, tri-, and tetranuclear organoboron catalysts was readily designed and prepared in nearly quantitative yields over two steps using commercially available feedstocks. Notably, these catalysts can be modularly tailored by fine control over the electrophilic property of the Lewis acidic boron center(s), electronic and steric effects of the electropositive ammonium cation, linker length between the boron center and the ammonium cation, the number of boron centers, and the nucleophilic anion. This modular design allows systematic manipulation of the reactivity and efficacy of the catalysts, thus optimizing suitable catalysts for versatile chemical transformations. These include the coupling of CO2 and epoxides, copolymerization of CO2 and epoxides, ring-opening polymerization (ROP) of epoxides, and ring-opening copolymerization (ROCOP) of epoxides and cyclic anhydrides.The utilization of mononuclear organoboron catalysts provided a turnover frequency of 11050 h-1 for the CO2/propylene oxide coupling reaction, an unprecedented efficiency of 5.0 kg of polymer/g of catalyst for the copolymerization of CO2 and cyclohexene oxide, and a record-breaking catalytic efficiency of 7.4 kg of polymer/g of catalyst for the ROCOP of epoxides with cyclic anhydrides. A turnover number of 56500 was observed at a catalyst loading of 10 ppm for the ROP of epoxides using the dinuclear catalysts. The tetranuclear organoboron catalysts realized the previously intractable task of the copolymerization of CO2 and epichlorohydrin, producing poly(chloropropylene carbonate) with the highest molecular weight of 36.5 kg/mol reported to date.Furthermore, the study revealed that the interaction between the dynamic Lewis multicore, that is, the intramolecular synergistic effect between the boron center(s) and the quaternary ammonium salt, plays a key role in mediating the catalytic activity and selectivity. This was based on investigations of the crystal structures of the catalysts, key intermediates, reaction kinetics, and density functional theory calculations. The modular tactics for the construction of organoboron catalysts presented in this Account should inspire more advanced catalyst designs.

Record Productivity and Unprecedented Molecular Weight for Ring-Opening Copolymerization of Epoxides and Cyclic Anhydrides Enabled by Organoboron Catalysts.

Producing polyesters with high molecular weight (Mn ) through ring-opening copolymerization (ROCOP) of epoxides with cyclic anhydrides remains a major challenge. Herein, we communicate a metal-free, highly active, and high thermoresistance system for the ROCOP of epoxides with cyclic anhydrides to prepare polyesters (13 examples). The organoboron catalysts can endure a reaction temperature as high as 180 °C for the ROCOP of cyclohexane oxide (CHO) with phthalic anhydride (PA) without the observation of any side reactions. The average Mn of the produced poly(CHO-alt-PA) climbed to 94.5 kDa with low polydispersity (Ð=1.19). Furthermore, an unprecedented turnover number of 9900, equivalent to an efficiency of 7.4 kg of polyester/g of catalyst, was achieved at a feed ratio of CHO/PA/catalyst=20000:10000:1 at 150 °C. Kinetic studies, crystal structure analysis, 11 B NMR spectra, and DFT calculations provided mechanistic justification for the effectiveness of the catalyst system.

Pinwheel-Shaped Tetranuclear Organoboron Catalysts for Perfectly Alternating Copolymerization of CO2 and Epichlorohydrin.

The copolymerization of carbon dioxide (CO2) and epoxides to produce aliphatic polycarbonates is a burgeoning technology for the large-scale utilization of CO2 and degradable polymeric materials. Even with the wealth of advancements achieved over the past 50 years on this green technology, many challenges remain, including the use of metal-containing catalysts for polymerization, the removal of the chromatic metal residue after polymerization, and the limited practicable epoxides, especially for those containing electron-withdrawing groups. Herein, we provide kinds of pinwheel-shaped tetranuclear organoboron catalysts for epichlorohydrin/CO2 copolymerization with >99% polymer selectivity and quantitative CO2 uptake (>99% carbonate linkages) under mild conditions (25-40 °C, 25 bar of CO2). The produced poly(chloropropylene carbonate) has the highest molecular weight of 36.5 kg/mol and glass transition temperature of 45.4 °C reported to date. The energy difference (ΔEa = 60.7 kJ/mol) between the cyclic carbonate and polycarbonate sheds light on the robust performance of our metal-free catalyst. Control experiments and density functional theory (DFT) calculations revealed a cyclically sequential copolymerization mechanism. The metal-free feature, high catalytic performance under mild conditions, and no trouble with chromaticity for the produced polymers imply that our catalysts are practical candidates to advance the CO2-based polycarbonates.

Precisely Alternating Copolymerization of Episulfides and Isothiocyanates: A Practical Route to Construct Sulfur-Rich Polymers.

The development of a controlled and reliable method to construct well-defined sulfur-containing polymers has sparked great interest in polymer science. Herein, we present the trial on the copolymerization of isothiocyanates with episulfides in the presence of organic onium salts, which provides direct access to a class of sulfur-rich polymers. This methodology has combined advantages of simple operation, no metals, mild conditions (25-100 °C), controlled polymerization performance (Mn > 105 g mol-1, D < 1.3), and high reactivity (turnover frequency over 1000 h-1). The metal-free feature and versatility of the easily accessible monomers, along with fine adjustment of the final properties enable this strategy to be a feasible approach to produce sulfur-rich polymers (16 examples).

Scalable, Durable, and Recyclable Metal-Free Catalysts for Highly Efficient Conversion of CO2 to Cyclic Carbonates.

A series of highly active organoboron catalysts for the coupling of CO2 and epoxides with the advantages of scalable preparation, thermostability, and recyclability is reported. The metal-free catalysts show high reactivity towards a wide scope of cyclic carbonates (14 examples) and can withstand a high temperature up to 150 °C. Compared with the current metal-free catalytic systems that use mol % catalyst loading, the catalytic capacity of the catalyst described herein can be enhanced by three orders of magnitude (epoxide/cat.=200 000/1, mole ratio) in the presence of a cocatalyst. This feature greatly narrows the gap between metal-free catalysts and state-of-the-art metallic systems. An intramolecular cooperative mechanism is proposed and certified on the basis of investigations on crystal structures, structure-performance relationships, kinetic studies, and key reaction intermediates.

Boundary-directed epitaxy of block copolymers.

Directed self-assembly of block copolymers (BCPs) enables nanofabrication at sub-10 nm dimensions, beyond the resolution of conventional lithography. However, directing the position, orientation, and long-range lateral order of BCP domains to produce technologically-useful patterns is a challenge. Here, we present a promising approach to direct assembly using spatial boundaries between planar, low-resolution regions on a surface with different composition. Pairs of boundaries are formed at the edges of isolated stripes on a background substrate. Vertical lamellae nucleate at and are pinned by chemical contrast at each stripe/substrate boundary, align parallel to boundaries, selectively propagate from boundaries into stripe interiors (whereas horizontal lamellae form on the background), and register to wide stripes to multiply the feature density. Ordered BCP line arrays with half-pitch of 6.4 nm are demonstrated on stripes >80 nm wide. Boundary-directed epitaxy provides an attractive path towards assembling, creating, and lithographically defining materials on sub-10 nm scales.

Crosslinked Resin-Supported Bifunctional Organocatalyst for Conversion of CO2 into Cyclic Carbonates.

The development of solvent-free, metal-free, recyclable organic catalysts is required for the current chemical fixation of carbon dioxide converted into cyclic carbonates. With the goal of reducing the cost, time, and energy consumption for the coupling reaction of CO2 and epoxides, a series of highly active heterogeneous catalysts, based on a thiourea and quaternary ammonium salt system, are synthesized by using a thiol-ene click reaction under ultraviolet light. Benefitting from synergistic interactions of the electrophilic center (thiourea) and the nucleophilic site (ammonium bromide), the catalysts exhibit excellent catalytic selectivity (99 %) for the cycloaddition of carbon dioxide with a diverse range of epoxides under mild conditions (1.2 MPa, 100 °C). Moreover, the catalyst can be easily recycled by facile filtration and reused for 5 times without noticeable loss of activity and selectivity. This work provides a potential heterogeneous catalyst for the conversion of carbon dioxide into high value-added chemicals with the combined advantages of low cost, easy recovery, and satisfactory catalytic properties.

High-Activity Organocatalysts for Polyether Synthesis via Intramolecular Ammonium Cation Assisted SN 2 Ring-Opening Polymerization.

This manuscript describes a kind of bifunctional organocatalyst with unprecedented reactivity for the synthesis of polyethers via ring-opening polymerization (ROP) of epoxides under mild conditions. The bifunctional catalyst incorporates two 9-borabicyclo[3.3.1]nonane centers on the two ends as Lewis acidic sites for epoxide activation and a quaternary ammonium halide in the middle as the initiating site. The catalyst could be easily prepared in two steps from commercially available stocks on up to kilogram scale with ≈100 % yield. The organoboron catalyst mediated ROP of epoxides displays living behavior with low catalyst loading (5 ppm) and enables the synthesis of polyethers with molecular weights of over a million grams per mole (>106  g mol-1 ). Based on the investigations on crystal structure of catalyst, MALDI-TOF, and 11 B NMR spectroscopy, an intramolecular ammonium cation assisted SN 2 mechanism is proposed and verified by DFT calculations.

Scalable Bifunctional Organoboron Catalysts for Copolymerization of CO2 and Epoxides with Unprecedented Efficiency.

The metallic catalyst-dominated alternating copolymerization of CO2 and epoxides has flourished for 50 years; however, the involved multistep preparation of the catalysts and the necessity to remove the colored metal residue in the final product present significant challenges in scalability. Herein, we report a series of highly active metal-free catalysts featured with an electrophilic boron center and a nucleophilic quaternary ammonium halide in one molecule for copolymerization of epoxides and CO2. The organocatalysts are easily scaled up to kilogram scale with nearly quantitative yield via two steps using commercially available stocks. The organocatalyst-mediated copolymerization of cyclohexane oxide and CO2 displays high activity (turnover frequency up to 4900 h-1) and >99% polycarbonate selectivity in a broad temperature range (25-150 °C) at mild CO2 pressure (15 bar). At a feed ratio of cyclohexane oxide/catalyst = 20 000/1, an efficiency of 5.0 kg of product/g of catalyst was achieved, which is the highest record achieved to date. The unprecedented activity toward CO2/epoxide copolymerization for our catalyst is a consequence of an intramolecular synergistic effect between the electrophilic boron center and the quaternary ammonium salt, which was experimentally ascertained by reaction kinetics studies, multiple control experiments, 11B NMR investigation, and the crystal structure of the catalyst. Density functional theory calculations further corroborated experimental conclusions and provided a deeper understanding of the catalysis process. The metal-free characteristic, scalable preparation, outstanding catalytic performances along with long-term thermostability demonstrate that the catalyst could be a promising candidate for large-scale production of CO2-based polymer.

Impact of Thermal History on the Kinetic Response of Thermoresponsive Poly(diethylene glycol monomethyl ether methacrylate)-block-poly(poly(ethylene glycol)methyl ether methacrylate) Thin Films Investigated by In Situ Neutron Reflectivity.

The impact of thermal history on the kinetic response of thin thermoresponsive diblock copolymer poly(diethylene glycol monomethyl ether methacrylate)-block-poly(poly(ethylene glycol) methyl ether methacrylate), abbreviated as PMEO2MA-b-POEGMA300, films is investigated by in situ neutron reflectivity. The PMEO2MA and POEGMA300 blocks are both thermoresponsive polymers with a lower critical solution temperature. Their transition temperatures (TTs) are around 25 °C (TT1, PMEO2MA) and 60 °C (TT2, POEGMA300). Thus, by applying different temperature protocols (20 to 60 or 20 to 40 to 60 °C), the PMEO2MA-b-POEGMA300 thin films experience different thermal histories: the first protocol directly switches from a swollen to a collapsed state, whereas the second one switches first from a swollen to a semicollapsed and finally to a collapsed state. Although the applied thermal histories differ, the response and final state of the collapsed films are very close to each other. After the thermal stimulus, both films present a complicated response composed of an initial shrinkage, followed by a rearrangement. Interestingly, a subsequent reswelling of the collapsed film is only observed in the case of having applied a thermal stimulus of 20 to 40 °C. The normalized film thickness and the D2O amount of each layer in the PMEO2MA-b-POEGMA300 films are consistent at the end of the two different thermal stimuli. Hence, it can be concluded that the thermal history does not influence the final state of the PMEO2MA-b-POEGMA300 films upon heating. Based on this property, these thin films are especially suitable for the temperature switches on the nanoscale, which may experience different thermal histories.

Polyamide nanofilms synthesized via controlled interfacial polymerization on a "jelly" surface.

A thermal-sensitive "jelly" was used to control the diffusion of a diamine monomer for synthesizing polyamide free-standing nanofilms with an adjustable thickness of 5-35 nm. The reduced reaction rate of the interfacial polymerization at the hexane-"jelly" interface made the synthesized nanofilms show high water permeation flux and suitable salt rejection, and they also have highly negative surface charges and fairly smooth surfaces.