Epidemiological and genomic analyses of human isolates of Streptococcus suis between 2005 and 2021 in Shenzhen, China.

Streptococcus suis (S. suis) is an important food-borne zoonotic pathogen that causes swine streptococcosis, which threatens human health and brings economic loss to the swine industry. Three-quarters of human S. suis infections are caused by serotype 2. A retrospective analysis of human S. suis cases in Shenzhen, a megacity in China, with high pork consumption, between 2005 and 2021 was conducted to understand its genomic epidemiology, pathogen virulence, and drug resistance characteristics. The epidemiological investigation showed that human cases of S. suis in Shenzhen were mainly associated with people who had been in close contact with raw pork or other swine products. Whole-genome sequence analysis showed that 33 human isolates in Shenzhen were dominated by serotype 2 (75.76%), followed by serotype 14 (24.24%), and the most prevalent sequence types (STs) were ST7 (48.48%) and ST1 (39.40%). ST242 (9.09%) and ST25 (3.03%), which were rarely reported, were also found. Phylogenetic analysis showed that the Shenzhen human isolates had close genetic relatedness to isolates from Guangxi (China), Sichuan (China), and Vietnam. We found a new 82 KB pathogenicity island (PAI) in the serotype 2 isolate that may play a role in sepsis. Similarly, a serotype 14 isolate, containing 78 KB PAI, was isolated from a patient presenting with streptococcal toxic shock syndrome (STSLS) who subsequently died. Multi-drug resistance (MDR) was high in human isolates of S. suis from Shenzhen. Most human isolates were resistant to tetracycline, streptomycin, erythromycin, and clindamycin, and 13 isolates had intermediate resistance to penicillin. In conclusion, swine importation from Guangxi, Sichuan, and Vietnam should be more closely monitored, and the use of antibiotics limited to reduce the potential for antimicrobial resistance (AMR).

A Novel Self-Assembled Graphene-Based Flame Retardant: Synthesis and Flame Retardant Performance in PLA.

In this study, a novel flame retardant (PMrG) was developed by self-assembling melamine and phytic acid (PA) onto rGO, and then applying it to the improvement of the flame resistance of PLA. PMrG simultaneously decreases the peak heat release rate (pHRR) and the total heat release (THR) of the composite during combustion, and enhances the LOI value and the time to ignition (TTI), thus significantly improving the flame retardancy of the composite. The flame retardant mechanism of the PMrG is also investigated. On one hand, the dehydration of PA and the decomposition of melamine in PMrG generate non-flammable volatiles, such as H2O and NH3, which dilute the oxygen concentration around the combustion front of the composite. On the other hand, the rGO, melamine, and PA components in PMrG create a synergistic effect in promoting the formation of a compact char layer during the combustion, which plays a barrier role and effectively suppresses the release of heat and smoke. In addition, the PMrGs in PLA exert a positive effect on the crystallization of the PLA matrix, thus playing the role of nucleation agent.

Functionalization of PET with Phosphazene Grafted Graphene Oxide for Synthesis, Flammability, and Mechanism.

Significant improvement in the fire resistance of polyethylene terephthalate (PET) while ensuring its mechanical properties is a tremendous challenge. A novel flame retardant (GO-HCCP, graphene oxide-hexachlorocyclotriphosphazene) was synthesized by nucleophilic substitution of the graphene oxide (GO) and hexachlorocyclotriphosphazene (HCCP) and then applied in PET by an in situ polymerization technique. The scanning electron microscope (SEM) showed a better dispersion of GO-HCCP than GO in the PET matrix. The char yield at 700 °C increased by 32.5% with the addition of GO-HCCP. Moreover, the peak heat release rate (pHRR), peak smoke produce rate (pSPR)and carbon monoxide production (COP)values significantly decreased by 26.0%, 16.7% and 37.5%, respectively, which indicates the outstanding fire and smoke suppression of GO-HCCP. In addition, the composites exhibited higher elastic modulus and tensile strength without compromising the toughness of PET matrix. These significantly reduced fire hazards properties are mainly attributed to the catalytic carbonation of HCCP and the barrier effect of GO. Thus, PET composites with good flame-retardant and mechanical properties were prepared, which provides a new strategy for further flame retardant PET preparation.

Polarization of avian macrophages upon avian flavivirus infection.

Avian Tembusu virus (TMUV) is a newly emerging avian pathogenic flavivirus that spreads rapidly, has an expanding host range and undergoes cross-species transmission. Our previous study identified avian monocytes/macrophages as the key targets of TMUV infection, since the infection of host monocytes/macrophages was crucial for the replication, transmission, and pathogenesis of TMUV. The polarization of host macrophages determines the functional phenotypes of macrophages; however, the effect of TMUV infection on macrophage polarization remains unclear. Here, we analysed the expression spectra of the marker genes of macrophage polarization upon TMUV infection in the HD11 chicken macrophage cell line and primary monocytes/macrophages isolated from the peripheral blood of specific pathogen-free (SPF) chickens and ducks. We found that viral replication mainly induced M1 marker genes and triggered nitric oxide (NO) release at different levels, suggesting that TMUV infection led mainly to host macrophages polarizing into the classically activated (M1) type. The NO that was increased upon infection did not function as an antiviral agent against TMUV, since the replication of TMUV in HD11 cells was not affected by the addition of an organic NO donor. Furthermore, upon TMUV infection, polarized HD11 cells exhibited increased migration but reduced phagocytosis, as evidenced by scratch assay and neutral red uptake assay, respectively. Our present study characterized the polarization of host monocytes/macrophages upon TMUV infection, which may lay a foundation for further research on the immune escape mechanism and pathogenic mechanism of TMUV.

Self-assembling peptide-based hydrogels: Fabrication, properties, and applications.

The hierarchical formation of self-assembling peptide-based hydrogels (SAPHs) starts from peptide to nanofibers, following with the entanglement into hydrogels with nanofibrous network. Such characteristic structure and extraordinary biocompatibility, and the peptide components endow the SAPHs with diverse applications in biotechnological field. Therefore, the thorough comprehension of SAPHs is significant to broadening their application. In this review, fabrication, properties, and biological applications of the SAPHs are introduced, and the factors influencing the synthesis process as well as the properties of the SAPHs products are also systematically explained. Meanwhile, we conclude the problems to be solved and provide our perspective to the future development of SAPHs in the biotechnology.

Global exploration of the metabolic requirements of gallid alphaherpesvirus 1.

Although therapeutics targeting viral metabolic processes have been considered as promising strategies to treat herpesvirus infection, the metabolic requirements of gallid alphaherpesvirus 1 (ILTV), which is economically important to the poultry industry worldwide, remain largely unknown. Using the ILTV-susceptible but nonpermissive chicken cell line DF-1 and the ILTV-permissive chicken cell line LMH as models, the present study explored the metabolic requirements of ILTV by global transcriptome analysis and metabolome assays of ILTV infected cell lines in combination with a set of functional validations. The extensive metabolic exploration demonstrated that ILTV infection tended to promote a metabolic shift from glycolysis to fatty acid (FA) and nucleotide biosynthesis and utilizes glutamine independently of glutaminolysis, without significant general effect on the TCA cycle. In addition, different metabolic pathways were found to be required for distinct stages of ILTV replication. Glucose and glutamine were required for the transcription of viral immediate early gene ICP4 and subsequent steps of viral replication. However, FA synthesis was essential for assembly but not required for other upstream steps of ILTV replication. Moreover, the metabolic requirements of ILTV infection revealed in chicken cell lines were further validated in chicken primary cells isolated from chicken embryo kidneys and chicken embryo livers. The present study, to the best of our knowledge, provides the first global metabolic profile of animal herpesviruses and illustrates the main characteristics of the metabolic program of ILTV.

Coupling effect of molecular weight and crosslinking kinetics on the formation of rubber nanoparticles and their agglomerates in EPDM/PP TPVs during dynamic vulcanization.

It is well-known that a fine dispersed rubber phase in thermoplastic vulcanizates (TPVs) is a key to obtain good mechanical properties and high elasticity of TPV products. Previous studies reported that the rubber nanodroplets formed during shearing blending can transform into rubber nanoparticles by in situ rapid crosslinking and these rubber nanoparticles spontaneously form agglomerates dispersed in a plastic matrix during dynamic vulcanization (DV). However, important influencing factors on the formation of rubber nanoparticles and their agglomeration during DV have not been reported yet. In this study, the coupling effect of the molecular weight (MW) of polypropylene (PP) and crosslinking kinetics including the crosslinking rate (CR) and crosslinking degree (CD) on the size of ethylene propylene diene monomer (EPDM) rubber nanoparticles and their agglomerates in EPDM/PP TPVs was systematically studied for the first time. The minimum diameter of EPDM nanodroplets was theoretically calculated by using the critical break-up law of viscoelastic melts for the blend with high MW PP or the critical capillary equation for the blend with low MW PP, and the real size of the EPDM nanoparticles was experimentally verified. Interestingly, the results show that the lower MW of the PP phase, lower CD and higher CR contribute to the formation of smaller rubber nanoparticles, whereas the higher MW of the PP phase and higher CD of the rubber phase contribute to the formation of smaller rubber nanoparticle agglomerates. This study provides guidance to optimize the microstructure of EPDM/PP TPVs for the preparation of high-performance TPV products.

Avian Flavivirus Infection of Monocytes/Macrophages by Extensive Subversion of Host Antiviral Innate Immune Responses.

Avian Tembusu virus (TMUV) is a newly emerging avian pathogenic flavivirus in China and Southeast Asia with features of rapid spread, an expanding host range, and cross-species transmission. The mechanisms of its infection and pathogenesis remain largely unclear. Here, we investigated the tropism of this arbovirus in peripheral blood mononuclear cells of specific-pathogen-free (SPF) ducks and SPF chickens and identified monocytes/macrophages as the key targets of TMUV infection. In vivo studies in SPF ducks and SPF chickens with monocyte/macrophage clearance demonstrated that the infection of monocytes/macrophages was crucial for viral replication, transmission, and pathogenesis. Further genome-wide transcriptome analyses of TMUV-infected chicken macrophages revealed that host antiviral innate immune barriers were the major targets of TMUV in macrophages. Despite the activation of major pattern recognition receptor signaling, the inductions of alpha interferon (IFN-α) and IFN-ß were blocked by TMUV infection on transcription and translation levels, respectively. Meanwhile, TMUV inhibited host redox responses by repressing the transcription of genes encoding NADPH oxidase subunits and promoting Nrf2-mediated antioxidant responses. The recovery of either of the above-mentioned innate immune barriers was sufficient to suppress TMUV infection. Collectively, we identify an essential step of TMUV infection and reveal extensive subversion of host antiviral innate immune responses.IMPORTANCE Mosquito-borne flaviviruses include a group of pathogenic viruses that cause serious diseases in humans and animals, including dengue, West Nile, and Japanese encephalitis viruses. These flaviviruses are zoonotic and use animals, including birds, as amplifying and reservoir hosts. Avian Tembusu virus (TMUV) is an emerging mosquito-borne flavivirus that is pathogenic for many avian species and can infect cells derived from mammals and humans in vitro Although not currently pathogenic for primates, the infection of duck industry workers and the potential risk of TMUV infection in immunocompromised individuals have been highlighted. Thus, the prevention of TMUV in flocks is important for both avian and mammalian health. Our study reveals the escape of TMUV from the first line of the host defense system in the arthropod-borne transmission route of arboviruses, possibly helping to extend our understanding of flavivirus infection in birds and refine the design of anti-TMUV therapeutics.

Host Src controls gallid alpha herpesvirus 1 intercellular spread in a cellular fatty acid metabolism-dependent manner.

Viral spread is considered a promising target for antiviral therapeutics, but the associated mechanisms remain unclear for gallid alpha herpesvirus 1 (ILTV). We previously identified proto-oncogene tyrosine-protein kinase Src (Src) as a crucial host determinant of ILTV infection. The present study revealed accelerated spread of ILTV upon Src inhibition. This phenomenon was independent of either viral replication or the proliferation of infected cells and could not be compromised by neutralizing antibody. Neither extracellular vesicles nor the direct cytosol-to-cytosol connections between adjacent cells contributed to the enhanced spread of ILTV upon Src inhibition. Further genome-wide transcriptional profile analyses in combination with functional validation identified fatty acid metabolism as an essential molecular event during modulation of the intercellular spread and subsequent cytopathic effect of ILTV by Src. Overall, these data suggest that Src controls the cell-to-cell spread of ILTV in a cellular fatty acid metabolism-dependent manner, which determines the virus's cytopathic effect.

Fibrous strain sensor with ultra-sensitivity, wide sensing range, and large linearity for full-range detection of human motion.

It is challenging to construct exquisite microstructures for integrating extraordinary sensitivity, wide strain range detectability, low hysteresis, good linearity, and excellent reliability and stability in a single type of strain sensor. In this paper, we report a high-performance fibrous strain sensor with ultrahigh sensitivity (gauge factor up to 350), wide sensing range (0.1% to 150% strain), low hysteresis, good linearity over a large strain range (up to 50%), and excellent reliability and stability (>2000 cycles). Our fibrous strain sensor exhibits superior comprehensive properties to previous strain sensors, attributed to its hierarchical microstructure composed of twisted polyurethane fibers and microcracked poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) sensing layer on each fiber, bridged by carbon nanotube agglomerates. This sensor is attractive and promising for the full-range detection of human motion from subtle deformations to large movements. In addition, the spatial extensional strain distribution of human skin can also be detected by the sensing fabric woven by this fibrous sensor due to its knittability.

Transparent Polymeric Strain Sensors for Monitoring Vital Signs and Beyond.

Wearable sensors that can precisely detect vital signs are highly desirable for monitoring personal health conditions and medical diagnosis. In this paper, we report an ultrasensitive strain sensor consisting of a 150 nm thick highly conductive dimethylsulfoxide-doped poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) sensing layer and an elastic fluorosilicone rubber substrate. This sensor exhibits a high sensitivity at small strains (e.g., gauge factor at 0.6% strain = 280), low limit of detection (<0.2% strain), and excellent repeatability and cycling stability. Therefore, it is promising for practically detecting vital signs, tiny human motions, and sounds. Furthermore, the semitransparent shallow blue color and the soft rubbery substrate make the strain sensor beautiful and comfortable to the human body.

Effect of Rubber Nanoparticle Agglomeration on Properties of Thermoplastic Vulcanizates during Dynamic Vulcanization.

We previously reported that the dispersed rubber microparticles in ethylene-propylene-diene monomer (EPDM)/polypropylene (PP) thermoplastic vulcanizates (TPVs) are actually agglomerates of rubber nanoparticles. In this study, based on this new understanding of the microstructure of TPV, we further revealed the microstructure-properties relationship of EPDM/PP TPV during dynamic vulcanization, especially the effect of the size of rubber nanoparticle agglomerates (dn), the thicknesses of PP ligaments (IDpoly) and the rubber network on the properties of EPDM/PP TPV. We were able to simultaneously obtain a high tensile strength, elongation at break, elastic modulus, and elasticity for the EPDM/PP TPV by the achievement of a smaller dn, a thinner IDpoly and a denser rubber network. Interestingly, the effect of dn and IDpoly on the elastic modulus of EPDM/PP TPV composed of rubber nanoparticle agglomerates is different from that of EPDM/PP TPVs composed of rubber microparticles reported previously. The deformation behavior of the TPVs during stretching was studied to understand the mechanism for the achievement of good mechanical properties. Interestingly, the rubber nanoparticle agglomerates are oriented along the tensile direction during stretching. The TPV samples with smaller and more numerous rubber nanoparticle agglomerates can slow down the development of voids and cracks more effectively, thus leading to increase in tensile strength and elongation at break of the EPDM/PP TPV.

New understanding of microstructure formation of the rubber phase in thermoplastic vulcanizates (TPV).

The breakup of the rubber phase in an ethylene-propylene-diene monomer (EPDM)/polypropylene (PP) blend at the early stage of dynamic vulcanization is similar to that in an unvulcanized EPDM/PP blend because of the low crosslink density of the EPDM phase. In this work, the minimum size of the rubber phase in the unvulcanized EPDM/PP blend was first calculated by using the critical breakup law of viscoelastic droplets in a matrix. The calculated results showed that the minimum size of the rubber phase in the unvulcanized blend was in the nanometer scale (25-46 nm), not the micrometer scale as reported in many works. Meanwhile, the actual size of the rubber phase in the thermoplastic vulcanizate (TPV) at both the early stage and the final stage of dynamic vulcanization was observed by using peak force tapping atomic force microscopy (PF-AFM). The results indicated that the EPDM phase indeed broke up into nanoparticles at the early stage of dynamic vulcanization, in good agreement with the calculated results. More interestingly, we first revealed that the micrometer-sized rubber particles commonly observed in TPV were actually the agglomerates of rubber nanoparticles with diameters between 40 and 60 nm. The mechanism for the formation of rubber nanoparticles and their agglomerates during dynamic vulcanization was then discussed. Our work provides guidance to control the microstructure of the rubber phase in TPV to prepare high performance TPV products for a wide range of applications in the automobile and electronic industries.

Smart responsive microcapsules capable of recognizing heavy metal ions.

Smart responsive microcapsules capable of recognizing heavy metal ions are successfully prepared with oil-in-water-in-oil double emulsions as templates for polymerization in this study. The microcapsules are featured with thin poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (P(NIPAM-co-BCAm)) membranes, and they can selectively recognize special heavy metal ions such as barium(II) or lead(II) ions very well due to the "host-guest" complexation between the BCAm receptors and barium(II) or lead(II) ions. The stable BCAm/Ba(2+) or BCAm/Pb(2+) complexes in the P(NIPAM-co-BCAm) membrane cause a positive shift of the volume phase transition temperature of the crosslinked P(NIPAM-co-BCAm) hydrogel to a higher temperature, and the repulsion among the charged BCAm/Ba(2+) or BCAm/Pb(2+) complexes and the osmotic pressure within the P(NIPAM-co-BCAm) membranes result in the swelling of microcapsules. Induced by recognizing barium(II) or lead(II) ions, the prepared microcapsules with P(NIPAM-co-BCAm) membranes exhibit isothermal and significant swelling not only in outer and inner diameters but also in the membrane thickness. The proposed microcapsules in this study are highly attractive for developing smart sensors and/or carriers for detection and/or elimination of heavy metal ions.