Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
Bioresour Technol ; 220: 233-238, 2016 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-27573477

RESUMEN

The present study aims to investigate the thermal decomposition behaviors and kinetics of biomass (cellulose/Douglas fir sawdust) and plastics (LDPE) in a non-catalytic and catalytic co-pyrolysis over ZSM-5 catalyst by using a thermogravimetric analyzer (TGA). It was found that there was a positive synergistic interaction between biomass and plastics according to the difference of weight loss (ΔW), which could decrease the formation of solid residue at the end of the experiment. The first order reaction model well fitted for both non-catalytic and catalytic co-pyrolysis of biomass with plastics. The activation energy (E) of Cellulose-LDPE-Catalyst and DF-LDPE-Catalyst are only 89.51 and 54.51kJ/mol, respectively. The kinetics analysis showed that adding catalyst doesn't change the decomposition mechanism. As a result, the kinetic study on catalytic co-pyrolysis of biomass with plastics was suggested that the catalytic co-pyrolysis is a promising technique that can significantly reduce the energy input.


Asunto(s)
Biomasa , Plásticos/química , Catálisis , Celulosa/química , Cinética , Modelos Teóricos , Termogravimetría
2.
Bioresour Technol ; 214: 45-54, 2016 Aug.
Artículo en Inglés | MEDLINE | ID: mdl-27126079

RESUMEN

Enhanced carbon yields of renewable alkanes for jet fuels were obtained through the catalytic microwave-induced co-pyrolysis and hydrogenation process. The well-promoted ZSM-5 catalyst had high selectivity toward C8-C16 aromatic hydrocarbons. The raw organics with improved carbon yield (∼44%) were more principally lumped in the jet fuel range at the catalytic temperature of 375°C with the LDPE to cellulose (representing waste plastics to lignocellulose) mass ratio of 0.75. It was also observed that the four species of raw organics from the catalytic microwave co-pyrolysis were almost completely converted into saturated hydrocarbons; the hydrogenation process was conducted in the n-heptane medium by using home-made Raney Ni catalyst under a low-severity condition. The overall carbon yield (with regards to co-reactants of cellulose and LDPE) of hydrogenated organics that mostly match jet fuels was sustainably enhanced to above 39%. Meanwhile, ∼90% selectivity toward jet fuel range alkanes was attained.


Asunto(s)
Celulosa/química , Hidrocarburos/síntesis química , Polietileno/química , Carbono/química , Catálisis , Hidrogenación , Microondas
3.
Bioresour Technol ; 135: 659-64, 2013 May.
Artículo en Inglés | MEDLINE | ID: mdl-22840200

RESUMEN

Microwave pyrolysis of torrefied Douglas fir sawdust pellet was investigated to determine the effects of torrefaction on the biofuel production. Compared to the pyrolysis of raw biomass, the increased concentrations of phenols and sugars and reduced concentrations of guaiacols and furans were obtained from pyrolysis of torrefied biomass, indicating that torrefaction as a pretreatment favored the phenols and sugars production. Additionally, about 3.21-7.50 area% hydrocarbons and the reduced concentration of organic acids were obtained from pyrolysis of torrefied biomass. Torrefaction also altered the compositions of syngas by reducing CO2 and increasing H2 and CH4. The syngas was rich in H2, CH4, and CO implying that the syngas quality was significantly improved by torrefaction process.


Asunto(s)
Biocombustibles/análisis , Biomasa , Biotecnología/métodos , Calefacción , Microondas , Aceites/química , Pseudotsuga/química , Cromatografía de Gases y Espectrometría de Masas
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...