Integrated and DC-powered superconducting microcomb.

Frequency combs, specialized laser sources emitting multiple equidistant frequency lines, have revolutionized science and technology with unprecedented precision and versatility. Recently, integrated frequency combs are emerging as scalable solutions for on-chip photonics. Here, we demonstrate a fully integrated superconducting microcomb that is easy to manufacture, simple to operate, and consumes ultra-low power. Our turnkey apparatus comprises a basic nonlinear superconducting device, a Josephson junction, directly coupled to a superconducting microstrip resonator. We showcase coherent comb generation through self-started mode-locking. Therefore, comb emission is initiated solely by activating a DC bias source, with power consumption as low as tens of picowatts. The resulting comb spectrum resides in the microwave domain and spans multiple octaves. The linewidths of all comb lines can be narrowed down to 1 Hz through a unique coherent injection-locking technique. Our work represents a critical step towards fully integrated microwave photonics and offers the potential for integrated quantum processors.

Near-Field Probing of Microwave Oscillators with Josephson Microscopy.

Voltage-controlled oscillators, serving as fundamental components in semiconductor chips, find extensive applications in diverse modules such as phase-locked loops, clock generators, and frequency synthesizers within high-frequency integrated circuits. This study marks the first implementation of superconducting Josephson probe microscopy for near-field microwave detection on multiple voltage-controlled oscillators. Focusing on spectrum tracking, various phenomena, such as stray spectra and frequency drifts, were found under nonsteady operating states. Parasitic electromagnetic fields, originating from power supply lines and frequency divider circuits, were identified as sources of interference between units. The investigation further determined optimal working states by analyzing features of the microwave distributions. Our research not only provides insights into the optimization of circuit design and performance enhancement in oscillators but also emphasizes the significance of nondestructive near-field microwave microscopy as a pivotal tool in characterizing integrated millimeter-wave chips.

Toroidic phase transitions in a direct-kagome artificial spin ice.

Ferrotoroidicity-the fourth form of primary ferroic order-breaks both space and time-inversion symmetry. So far, direct observation of ferrotoroidicity in natural materials remains elusive, which impedes the exploration of ferrotoroidic phase transitions. Here we overcome the limitations of natural materials using an artificial nanomagnet system that can be characterized at the constituent level and at different effective temperatures. We design a nanomagnet array as to realize a direct-kagome spin ice. This artificial spin ice exhibits robust toroidal moments and a quasi-degenerate ground state with two distinct low-temperature toroidal phases: ferrotoroidicity and paratoroidicity. Using magnetic force microscopy and Monte Carlo simulation, we demonstrate a phase transition between ferrotoroidicity and paratoroidicity, along with a cross-over to a non-toroidal paramagnetic phase. Our quasi-degenerate artificial spin ice in a direct-kagome structure provides a model system for the investigation of magnetic states and phase transitions that are inaccessible in natural materials.

Unconventional Superconducting Diode Effects via Antisymmetry and Antisymmetry Breaking.

Symmetry breaking plays a pivotal role in unlocking intriguing properties and functionalities in material systems. For example, the breaking of spatial and temporal symmetries leads to a fascinating phenomenon: the superconducting diode effect. However, generating and precisely controlling the superconducting diode effect pose significant challenges. Here, we take a novel route with the deliberate manipulation of magnetic charge potentials to realize unconventional superconducting flux-quantum diode effects. We achieve this through suitably tailored nanoengineered arrays of nanobar magnets on top of a superconducting thin film. We demonstrate the vital roles of inversion antisymmetry and its breaking in evoking unconventional superconducting effects, namely a magnetically symmetric diode effect and an odd-parity magnetotransport effect. These effects are nonvolatilely controllable through in situ magnetization switching of the nanobar magnets. Our findings promote the use of antisymmetry (breaking) for initiating unconventional superconducting properties, paving the way for exciting prospects and innovative functionalities in superconducting electronics.

Linear and phase controllable terahertz frequency conversion via ultrafast breaking the bond of a meta-molecule.

The metasurface platform with time-varying characteristics has emerged as a promising avenue for exploring exotic physics associated with Floquet materials and for designing photonic devices like linear frequency converters. However, the limited availability of materials with ultrafast responses hinders their applications in the terahertz range. Here we present a time-varying metasurface comprising an array of superconductor-metal hybrid meta-molecules. Each meta-molecule consists of two meta-atoms that are "bonded" together by double superconducting microbridges. Through experimental investigations, we demonstrate high-efficiency linear terahertz frequency conversion by rapidly breaking the bond using a coherent ultrashort terahertz pump pulse. The frequency and relative phase of the converted wave exhibit strong dependence on the pump-probe delay, indicating phase controllable wave conversion. The dynamics of the meta-molecules during the frequency conversion process are comprehensively understood using a time-varying coupled mode model. This research not only opens up new possibilities for developing innovative terahertz sources but also provides opportunities for exploring topological dynamics and Floquet physics within metasurfaces.

A compact multi-pixel superconducting nanowire single-photon detector array supporting gigabit space-to-ground communications.

Classical and quantum space-to-ground communications necessitate highly sensitive receivers capable of extracting information from modulated photons to extend the communication distance from near-earth orbits to deep space explorations. To achieve gigabit data rates while mitigating strong background noise photons and beam drift in a highly attenuated free-space channel, a comprehensive design of a multi-functional detector is indispensable. In this study, we present an innovative compact multi-pixel superconducting nanowire single-photon detector array that integrates near-unity detection efficiency (91.6%), high photon counting rate (1.61 Gcps), large dynamic range for resolving different photon numbers (1-24), and four-quadrant position sensing function all within one device. Furthermore, we have constructed a communication testbed to validate the advantages offered by such an architecture. Through 8-PPM (pulse position modulation) format communication experiments, we have achieved an impressive maximum data rate of 1.5 Gbps, demonstrating sensitivities surpassing previous benchmarks at respective speeds. By incorporating photon number information into error correction codes, the receiver can tolerate maximum background noise levels equivalent to 0.8 photons/slot at a data rate of 120 Mbps-showcasing a great potential for daylight operation scenarios. Additionally, preliminary beam tracking tests were conducted through open-loop scanning techniques, which revealed clear quantitative dependence indicating sensitivity variations based on beam location. Based on the device characterizations and communication results, we anticipate that this device architecture, along with its corresponding signal processing and coding techniques, will be applicable in future space-to-ground communication tasks.

High-timing-precision detection of single X-ray photons by superconducting nanowires.

Precisely acquiring the timing information of individual X-ray photons is important in both fundamental research and practical applications. The timing precision of commonly used X-ray single-photon detectors remains in the range of one hundred picoseconds to microseconds. In this work, we report on high-timing-precision detection of single X-ray photons through the fast transition to the normal state from the superconductive state of superconducting nanowires. We successfully demonstrate a free-running X-ray single-photon detector with a timing resolution of 20.1 ps made of 100-nm-thick niobium nitride film with an active area of 50 µm by 50 µm. By using a repeated differential timing measurement on two adjacent X-ray single-photon detectors, we demonstrate a precision of 0.87 ps in the arrival-time difference of X-ray photon measurements. Therefore, our work significantly enhances the timing precision in X-ray photon counting, opening a new niche for ultrafast X-ray photonics and many associated applications.

Modulo-addition operation enables terahertz programmable metasurface for high-resolution two-dimensional beam steering.

Electrically controlled terahertz (THz) beamforming antennas are essential for various applications such as wireless communications, security checks, and radar to improve coverage and information capacity. The emerging programmable metasurface provides a flexible, cost-effective platform for THz beam steering. However, scaling such arrays to achieve high-gain beam steering faces several technical challenges. Here, we propose a pixelated liquid crystal THz metasurface with a crossbar structure, thereby increasing the array scale to more than 3000. The coding pattern on the programmable device is generated by the modulo-addition of the coding sequences on the top and bottom layers. We experimentally demonstrate the programmable liquid crystal metasurface capable of active beam deflection in the upper half-space. This scale-up of programmable devices opens exciting opportunities in pencil beamforming, high-speed information processing, and optical computing.

The value of using heterogeneous detector groups for the development of time-of-flight (TOF) positron emission tomography (PET) systems.

Objective. Much recent attention on positron emission tomography (PET) is the development of time-of-flight (TOF) systems with ever-improving coincidence time resolution (CTR). This is because, when all other factors remain the same, a better CTR leads to images of better statistics and effectively increases the sensitivity of the system. However, detector designs that aggressively improve the CTR often compromise the detection efficiency (DE) and offset the benefit gained. Under this circumstance, in developing a TOF PET system it may be beneficial to employ heterogeneous detector groups to balance the overall CTR and DE of the system. In this study, we examine the potential value of this system design strategy by considering two-dimensional systems that assume several representative ways of mixing two detector groups.Approach. The study is based on computer simulation and specifically considers medium time-resolution (MTR) detectors that have a 528 ps CTR and high time-resolution (HTR) detectors that have a 100 ps CTR and a DE that is 0.7 times that of the MTR detector. We examine contrast recovery, noise, and subjective quality of the resulting images under various ways of mixing the MTR and HTR detectors.Main results. With respect to the traditional configuration that adopts only the HTR detectors, symmetric heterogeneous configurations may offer comparable or better images while using considerably fewer HTRs. On the other hand, asymmetric heterogeneous configurations may allow the use of only a few HTRs for improving image quality locally.Significance. This study demonstrates the value of the proposed system-level design strategy of using heterogeneous detector groups for achieving high effective system sensitivity by factoring into the tradeoff between the CTR and DE of the detector.

Image distortion by ambiguous multiple-photon detections in a superconducting nanowire single-photon imager and the correction method.

Scaling up superconducting nanowire single-photon detectors (SNSPDs) into a large array for imaging applications is the current pursuit. Although various readout architectures have been proposed, they cannot resolve multiple-photon detections (MPDs) currently, which limits the operation of the SNSPD arrays at high photon flux. In this study, we focused on the readout ambiguity of a superconducting nanowire single-photon imager applying time-of-flight multiplexing readout. The results showed that image distortion depended on both the incident photon flux and the imaging object. By extracting multiple-photon detections on idle pixels, which were virtual because of the incorrect mapping from the ambiguous readout, a correction method was proposed. An improvement factor of 1.3~9.3 at a photon flux of µ = 5 photon/pulse was obtained, which indicated that joint development of the pixel design and restoration algorithm could compensate for the readout ambiguity and increase the dynamic range.

Topotactic fabrication of transition metal dichalcogenide superconducting nanocircuits.

Superconducting nanocircuits, which are usually fabricated from superconductor films, are the core of superconducting electronic devices. While emerging transition-metal dichalcogenide superconductors (TMDSCs) with exotic properties show promise for exploiting new superconducting mechanisms and applications, their environmental instability leads to a substantial challenge for the nondestructive preparation of TMDSC nanocircuits. Here, we report a universal strategy to fabricate TMDSC nanopatterns via a topotactic conversion method using prepatterned metals as precursors. Typically, robust NbSe2 meandering nanowires can be controllably manufactured on a wafer scale, by which a superconducting nanowire circuit is principally demonstrated toward potential single photon detection. Moreover, versatile superconducting nanocircuits, e.g., periodical circle/triangle hole arrays and spiral nanowires, can be prepared with selected TMD materials (NbS2, TiSe2, or MoTe2). This work provides a generic approach for fabricating nondestructive TMDSC nanocircuits with precise control, which paves the way for the application of TMDSCs in future electronics.

van der Waals Self-Epitaxial Growth of Inch-Sized Superconducting Niobium Diselenide Films.

Ultrathin superconducting films are the basis of superconductor devices. van der Waals (vdW) NbSe2 with noncentrosymmetry exhibits exotic superconductivity and shows promise in superconductor electronic devices. However, the growth of inch-scale NbSe2 films with layer regulation remains a challenge because vdW structural material growth is strongly dependent on the epitaxial guidance of the substrate. Herein, a vdW self-epitaxy strategy is developed to eliminate the substrate driving force in film growth and realize inch-sized NbSe2 film growth with thicknesses from 2.1 to 12.1 nm on arbitrary substrates. The superconducting transition temperature of 5.1 K and superconducting transition width of 0.30 K prove the top homogeneity and quality of superconductivity among all of the synthetic NbSe2 films. Coupled with a large area and substrate compatibility, this work paves the way for developing NbSe2 superconductor electronics.

Directional terahertz holography with thermally active Janus metasurface.

Dynamic manipulation of electromagnetic (EM) waves with multiple degrees of freedom plays an essential role in enhancing information processing. Currently, an enormous challenge is to realize directional terahertz (THz) holography. Recently, it was demonstrated that Janus metasurfaces could produce distinct responses to EM waves from two opposite incident directions, making multiplexed dynamic manipulation of THz waves possible. Herein, we show that thermally activated THz Janus metasurfaces integrating with phase change materials on the meta-atoms can produce asymmetric transmission with the designed phase delays. Such reconfigurable Janus metasurfaces can achieve asymmetric focusing of THz wave and directional THz holography with free-space image projections, and particularly the information can be manipulated via temperature and incident THz wave direction. This work not only offers a common strategy for realizing the reconfigurability of Janus metasurfaces, but also shows possible applications in THz optical information encryption, data storage, and smart windows.

Antireflection Coatings Based on PEDOT:PSS Conductive Polymer Using d-Sorbitol Additives for Terahertz Spectroscopy and Imaging.

Optical antireflection has been employed for a variety of applications in terahertz spectroscopy and detectors. However, current methods encounter challenges in terms of cost, bandwidth, structural complexity, and performance. In this study, a low-cost, broadband, and easily processed THz antireflection coating scheme based on the model of impedance-matching effect is proposed, using a 6 wt % d-sorbitol-doped poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (s-PEDOT:PSS) film. By adjusting the thickness of the s-PEDOT:PSS film, these biocompatible conductive polymers enable a significant reduction of Fresnel reflection and operate over a broad bandwidth between 0.2 and 2.2 THz. Applying the antireflective coating to the surface of the sample substrate and electro-optic probe crystal in THz spectroscopy and near-field imaging shows that the spectral resolution is significantly improved, and the devices exhibit more excellent intended performance. The findings of this study could aid in improving the measurement capability of various THz time-domain spectroscopy and imaging system.

Modeling of a multireflector terahertz imaging system using a geometrical optics model based on angular spectrum theory.

We propose a simulation method for a multireflector terahertz imaging system. The description and verification of the method are based on an existing active bifocal terahertz imaging system at 0.22 THz. Using the phase conversion factor and angular spectrum propagation, the computation of the incident and received fields requires only a simple matrix operation. The phase angle is used to calculate the ray tracking direction, and the total optical path is used to calculate the scattering field of defective foams. Compared with the measurements and simulations of aluminum disks and defective foams, the validity of the simulation method is confirmed in the field of view of 50 cm × 90 cm at 8 m. This work aims to develop better imaging systems by predicting their imaging behavior for different targets before manufacturing.

Freestanding narrowband terahertz filters based on aluminum foil.

Terahertz (THz) filters with high transmission coefficient (T) in the passband and frequency selectivity are critical in numerous applications such as astronomical detection and next-generation wireless communication. Freestanding bandpass filters eliminate the Fabry-Pérot effect of substrate, thus providing a promising choice for cascaded THz metasurfaces. However, the freestanding bandpass filters (BPFs) using the traditional fabrication process are costly and fragile. Here, we demonstrate a methodology to fabricate THz BPFs using aluminum (Al) foils. We designed a series of filters with center frequencies below 2 THz and manufacture them on 2-inch Al foils with various thicknesses. By optimizing the geometry, T of the filter at the center frequency is over 92%, and the relative full-width half maxima (FWHM) is as narrow as 9%. The responses of BPFs show that "cross-shaped" structures are insensitive to the polarization direction. The simple and low-cost fabrication process of the freestanding BPFs promise their widespread applications in THz systems.

Terahertz Spin Current Dynamics in Antiferromagnetic Hematite.

An important vision of modern magnetic research is to use antiferromagnets (AFMs) as controllable and active ultrafast components in spintronic devices. Hematite (α-Fe2 O3 ) is a promising model material in this respect because its pronounced Dzyaloshinskii-Moriya interaction leads to the coexistence of antiferromagnetism and weak ferromagnetism. Here, femtosecond laser pulses are used to drive terahertz (THz) spin currents from α-Fe2 O3 into an adjacent Pt layer. Two contributions to the generation of the spin current with distinctly different dynamics are found: the impulsive stimulated Raman scatting that relies on the AFM order and the ultrafast spin Seebeck effect that relies on the net magnetization. The total THz spin current dynamics can be manipulated by a medium-strength magnetic field below 1 T. The control of the THz spin current achieved in α-Fe2 O3 opens the pathway toward tailoring the exact spin current dynamics from ultrafast AFM spin sources.

Polarizer-free measurement of the full Stokes vector using a fiber-coupled superconducting nanowire single photon detector with a polarization extinction ratio of ∼2.

The characterization and manipulation of polarization state at single photon level are of great importance in research fields such as quantum information processing and quantum key distribution, where photons are normally delivered using single mode optical fibers. To date, the demonstrated polarimetry measurement techniques based on a superconducting nanowire single photon detector (SNSPD) require the SNSPD to be either highly sensitive or highly insensitive to the photon's polarization state, therefore placing an unavoidable challenge on the SNSPD's design and fabrication processes. In this article, we present the development of an alternative polarimetry measurement technique, of which the stringent requirement on the SNSPD's polarization sensitivity is removed. We validate the proposed technique by a rigorous theoretical analysis and comparisons of the experimental results obtained using a fiber-coupled SNSPD with a polarization extinction ratio of ∼2 to that obtained using other well-established known methods. Based on the full Stokes data measured by the proposed technique, we also demonstrate that at the single photon level (∼ -100 dBm), the polarization state of the photon delivered to the superconducting nanowire facet plane can be controlled at will using a further developed algorithm. Note that other than the fiber-coupled SNSPD, the only component involved is a quarter-wave plate (no external polarizer is necessary), which when aligned well has a paid insertion loss less than 0.5 dB.

Simple terahertz metasurface with broadband and efficient functionality.

Pancharatnam-Berry (PB) metasurfaces have demonstrated mighty capability to manipulate electromagnetic (EM) waves, and exhibited potential applications for devices with broadband and efficient functionality. However, it remains a challenge to simultaneously achieve broadband and efficient wavefront manipulation for terahertz (THz) components with simple profiles. Herein, we introduce a simple ultra-thin PB metasurface with superior properties in the THz region. The structure is composed of a simple metallic C-Shaped Split Ring Resonator (CSRR) patterned on a flexible polyimide support layer. It is verified that the circular transmission efficiency is close to the theoretical limit of the single-layer metasurface in the range of 0.6 - 1.2 THz. Furthermore, we design metasurfaces based on the PB meta-atoms with spatially rotated orientation to achieve beam steering and superposition of vortex waves. The results are basically in line with expectations, validating the good performances of our proposal. This simple and easily deployable metasurface will give rise to more possibilities for the design of THz functional devices.

Electrically addressable integrated intelligent terahertz metasurface.

Reconfigurable intelligent surfaces (RISs) play an essential role in various applications, such as next-generation communication, uncrewed vehicles, and vital sign recognizers. However, in the terahertz (THz) region, the development of RISs is limited because of lacking tunable phase shifters and low-cost sensors. Here, we developed an integrated self-adaptive metasurface (SAM) with THz wave detection and modulation capabilities based on the phase change material. By applying various coding sequences, the metasurface could deflect THz beams over an angle range of 42.8°. We established a software-defined sensing reaction system for intelligent THz wave manipulation. In the system, the SAM self-adaptively adjusted the THz beam deflection angle and stabilized the reflected power in response to the detected signal without human intervention, showing vast potential in eliminating coverage dead zones and other applications in THz communication. Our programmable controlled SAM creates a platform for intelligent electromagnetic information processing in the THz regime.