Efficient C-N coupling for urea electrosynthesis on defective Co3O4 with dual-functional sites.

Urea electrosynthesis under ambient conditions is emerging as a promising alternative to conventional synthetic protocols. However, the weak binding of reactants/intermediates on the catalyst surface induces multiple competing pathways, hindering efficient urea production. Herein, we report the synthesis of defective Co3O4 catalysts that integrate dual-functional sites for urea production from CO2 and nitrite. Regulating the reactant adsorption capacity on defective Co3O4 catalysts can efficiently control the competing reaction pathways. The urea yield rate of 3361 mg h-1 gcat-1 was achieved with a corresponding faradaic efficiency (FE) of 26.3% and 100% carbon selectivity at a potential of -0.7 V vs. the reversible hydrogen electrode. Both experimental and theoretical investigations reveal that the introduction of oxygen vacancies efficiently triggers the formation of well-matched adsorption/activation sites, optimizing the adsorption of reactants/intermediates while decreasing the C-N coupling reaction energy. This work offers new insights into the development of dual-functional catalysts based on non-noble transition metal oxides with oxygen vacancies, enabling the efficient electrosynthesis of essential C-N fine chemicals.

Selective Electrochemical Oxidation of Benzylic C-H to Benzylic Alcohols with the Aid of Imidazolium Radical Mediators.

Selective oxidation of benzylic C-H to benzylic alcohols is a well-known challenge in the chemical community since benzylic C-H is more prone to be overoxidized to benzylic ketones. In this work, we report the highly selective electro-oxidation of benzylic C-H to benzylic alcohols in an undivided cell in ionic liquid-based solution. As an example, the selectivity toward xanthydrol could be as high as 95.7% at complete conversion of xanthene, a typical benzylic C-H compound, on gram-scale in imidazolium bromide/H2O/DMF. Mechanism investigation reveals that the imidazolium radical generated in situ participants in a proton-coupled electron transfer process and low-barrier hydrogen bonds stabilize the reaction intermediates, together steering the redox equilibrium, favoring benzylic alcohols over benzylic ketones.

Modulating adsorbed hydrogen drives electrochemical CO2-to-C2 products.

Electrocatalytic CO2 reduction is a typical reaction involving two reactants (CO2 and H2O). However, the role of H2O dissociation, which provides active *H species to multiple protonation steps, is usually overlooked. Herein, we construct a dual-active sites catalyst comprising atomic Cu sites and Cu nanoparticles supported on N-doped carbon matrix. Efficient electrosynthesis of multi-carbon products is achieved with Faradaic efficiency approaching 75.4% with a partial current density of 289.2 mA cm-2 at -0.6 V. Experimental and theoretical studies reveal that Cu nanoparticles facilitate the C-C coupling step through *CHO dimerization, while the atomic Cu sites boost H2O dissociation to form *H. The generated *H migrate to Cu nanoparticles and modulate the *H coverage on Cu NPs, and thus promote *CO-to-*CHO. The dual-active sites effect of Cu single-sites and Cu nanoparticles gives rise to the catalytic performance.

Synthesis of d-Gluconic Acetal Surfactants and Their Foaming Behaviors.

Sugars are natural and environmentally benign substances, which can offer various hydroxyl groups. The understanding of details of the hydroxyl interactions in the hydrophilic groups of sugar-based surfactants, as well as the related properties, is still indistinct. Here, novel d-gluconic acetal surfactants with bicyclic and monocyclic structures in the head group were designed and synthesized. The obtained surfactant with a bicyclic architecture exhibited excellent foamability and a multistimulus-responsive behavior toward foam stabilization. In addition, the control of foamability from defoaming and foaming could be achieved by changing pH values or bubbling gas of CO2/N2. To explore the structural effects such as hydroxyl groups and rigidity of the head group on the properties of sugar-based surfactants, another kind of amphiphilic molecule with various OH- groups and a monocycle in the head group was designed for comparison. These two series of amphiphilic molecules both exhibited good surface activity. However, only the d-gluconic acetal surfactant with a bicyclic structure and a smaller number of OH- groups exhibited excellent foamability. Further studies showed that the foam behaviors were attributed to the conformation and arrangement of the surfactant molecule at the surface layer with the assistance of hydrogen bonds formed by hydroxyl groups and H2O molecules. In addition, the surfactant could provide an environmentally friendly foamer in many potential applications.

Highly efficient C(CO)-C(alkyl) bond cleavage in ketones to access esters over ultrathin N-doped carbon nanosheets.

Selective oxidative cleavage of the C(CO)-C bond in ketones to access esters is a highly attractive strategy for upgrading ketones. However, it remains a great challenge to realize this important transformation over heterogeneous metal-free catalysts. Herein, we designed a series of porous and ultrathin N-doped carbon nanosheets (denoted as CN-X, where X represents the pyrolysis temperature) as heterogeneous metal-free catalysts. It was observed that the fabricated CN-800 could efficiently catalyze the oxidative cleavage of the C(CO)-C bond in various ketones to generate the corresponding methyl esters at 130 °C without using any additional base. Detailed investigations revealed that the higher content and electron density of the graphitic-N species contributed to the excellent performance of CN-800. Besides, the high surface area, affording active sites that are more easily accessed, could also enhance the catalytic activity. Notably, the catalysts have great potential for practical applications because of some obvious advantages, such as low cost, neutral reaction conditions, heterogeneous nature, high efficiency, and broad ketone scope. To the best of our knowledge, this is the first work on efficient synthesis of methyl esters via oxidative esterification of ketones over heterogeneous metal-free catalysts.

Efficient synthesis of cyclic carbonates from CO2 under ambient conditions over Zn(betaine)2Br2: experimental and theoretical studies.

It is very interesting to synthesize high value-added chemicals from CO2 under mild conditions with low energy consumption. Here, we report that a novel catalyst, Zn(betaine)2Br2, can efficiently promote the cycloaddition of CO2 with epoxides to synthesize cyclic carbonates under ambient conditions (30 °C, 1 atm). DFT calculations provide important insights into the mechanism, particularly the unusual synergistic catalytic action of Zn2+, Br- and NR4+, which is the critical factor for the outstanding performance of Zn(betaine)2Br2. The unique features of the catalyst are that it is cheap, green and very easy to prepare.

Production of Piperidine and δ-Lactam Chemicals from Biomass-Derived Triacetic Acid Lactone.

Piperidine and δ-Lactam chemicals have wide application, which are currently produced from fossil resource in industry. Production of this kind of chemicals from lignocellulosic biomass is of great importance, but is challenging and the reported routes give low yield. Herein, we demonstrate the strategy to synthesize 2-methyl piperidine (MP) and 6-methylpiperidin-2-one (MPO) from biomass-derived triacetic acid lactone (TAL) that is produced microbially from glucose. In this route, TAL was firstly converted into 4-hydroxy-6-methylpyridin-2(1H)-one (HMPO) through facile aminolysis, subsequently HMPO was selectively transformed into MP or MPO over Ru catalysts supported on beta zeolite (Ru/BEA-X, X is the molar ratio of Si to Al) via the tandem reaction. It was found that the yield of MP could reach 76.5 % over Ru/BEA-60 in t-BuOH, and the yield of MPO could be 78.5 % in dioxane. Systematic studies reveal that the excellent catalytic performance of Ru/BEA-60 was closely correlated with the cooperative effects between active metal and acidic zeolite with large pore geometries. The related reaction pathway was studied on the basis of control experiments.

The in situ study of surface species and structures of oxide-derived copper catalysts for electrochemical CO2 reduction.

Oxide-derived copper (OD-Cu) has been discovered to be an effective catalyst for the electroreduction of CO2 to C2+ products. The structure of OD-Cu and its surface species during the reaction process are interesting topics, which have not yet been clearly discussed. Herein, in situ surface-enhanced Raman spectroscopy (SERS), operando X-ray absorption spectroscopy (XAS), and 18O isotope labeling experiments were employed to investigate the surface species and structures of OD-Cu catalysts during CO2 electroreduction. It was found that the OD-Cu catalysts were reduced to metallic Cu(0) in the reaction. CuO x species existed on the catalyst surfaces during the CO2RR, which resulted from the adsorption of preliminary intermediates (such as *CO2 and *OCO-) on Cu instead of on the active sites of the catalyst. It was also found that abundant interfaces can be produced on OD-Cu, which can provide heterogeneous CO adsorption sites (strong binding sites and weak binding sites), leading to outstanding performance for obtaining C2+ products. The Faradaic efficiency (FE) for C2+ products reached as high as 83.8% with a current density of 341.5 mA cm-2 at -0.9 V vs. RHE.

A depth-suitable and water-stable trap for CO2 capture.

In terms of CO2 capture and storage (CCS), it is highly desired to substitute of high efficiency process for the applied one which is far from the ideal one. Physical processes cannot capture CO2 effectively, meanwhile CO2 desorption is energy-intensive in chemical processes. Herein, a depth-suitable and water-stable trap for CO2 capture was discovered. Carboxylates can react with polybasic acid roots by forming united hydrogen bonds. Carboxylate ionic liquid (IL) aqueous solutions can absorb one equimolar CO2 chemically under ambient pressure, and its CO2 desorption is easy, similar to that in physical absorption/desorption processes. When used as aqueous solutions, carboxylate ILs can replace alkanolamines directly in the applied CCS process, and the efficiency is enhanced significantly due to the low regenerating temperature. CO2 (or polybasic acids) can be used as a polarity switch for ILs and surfactants. A new method for producing carboxylate ILs is also proposed.

Dehydroxyalkylative halogenation of C(aryl)-C bonds of aryl alcohols.

We herein report Cu mediated side-directed dehydroxyalkylative halogenation of aryl alcohols. C(aryl)-C bonds of aryl alcohols were effectively cleaved, affording the corresponding aryl chlorides, bromides and iodides in excellent yields. Aryl alcohols could serve as both aromatic electrophilic and radical synthetic equivalents during the reaction.

Expression levels and significance of miR-184 and miR-126 in burned rats.

Expression levels and significance of miR-184 and miR-126 in burned rats were investigated. A total of 30 healthy rats were selected to construct a burn rat model, and another 10 healthy rats as the control group. The modeled rats were divided into groups I, II and III according to burn area, 10 for each group. The reverse transcription-quantitative polymerase chain reaction (RT-q.PCR) was used to detect the expression of miR-184 and miR-126 in the serum of three groups of burned rats, and ELISA was employed to detect the expression levels in peripheral blood and the correlation. There was no difference in the expression levels of miR-184 and miR-126 among the four groups of rats before modeling (P>0.05). Those of miR-184 and miR-126 at each time point were lower than those at the previous one in groups I, II and III (P<0.05). There was no significant change in the expression levels of miR-184 and miR-126 in the control group (P>0.05). At the same time point, those of miR-184 and miR-126 decreased with the increase of burn degree, and the difference was statistically significant between every two groups (P<0.05). The results of Pearson's correlation analysis revealed that the expression level of miR-184 was positively correlated with that of miR-126 (r=0.832, P=0.002). miR-184 and miR-126 were positively correlated with burn degree (r=0.901, P=0.001, r=0.775, P=0.001) and time after burn (r=0.732, P=0.004, r=0.753, P=0.002). The expression levels of miR-184 and miR-126 decrease in burned rats. The changes of their levels may be used as a reference standard for clinical efficacy evaluation to evaluate burn degree, preventing burn wounds from deepening.

Catalysis of photooxidation reactions through transformation between Cu2+ and Cu+ in TiO2-Cu-MOF composites.

Novel porous TiO2@Cu3(BTC)2 composites, which were synthesized using ionic liquids (ILs) as solvents, exhibited excellent activity for photooxidation of styrene to 4-aryl tetralones and promoting the Glaser coupling reaction with O2 under light irradiation. It was discovered that the transformation between Cu2+ and Cu+ was crucial for enhancing the photocatalytic performance.

Highly effective photoreduction of CO2 to CO promoted by integration of CdS with molecular redox catalysts through metal-organic frameworks.

We propose a strategy to synthesize ternary CdS/UiO-bpy/Co composites by integration of CdS and molecular redox catalysts through metal-organic framework (MOF) UiO-bpy. The CdS/UiO-bpy/Co composites were very effective for photocatalytic conversion of CO2 to CO under visible light irradiation. The evolution rate of CO could reach 235 µmol g-1 h-1, which was a 10.2-fold improvement compared to that for the parent CdS, and selectivity for CO was 85%. The outstanding performance of the CdS/UiO-bpy/Co composites resulted from promoting the separation and migration of photo-induced charge carriers, enhancing the adsorption of CO2 molecules, and offering abundant active sites for CO2 reduction. As far as we know, this is the first study to integrate inorganic semiconductors and molecular redox catalysts through MOFs.

Efficient Generation of Lactic Acid from Glycerol over a Ru-Zn-CuI /Hydroxyapatite Catalyst.

The biodiesel production process generates a significant amount of glycerol as a byproduct. A drive to add value has attracted worldwide attention, with the aim of improving the overall effectiveness and profitability of biodiesel production. Herein, we report hydroxyapatite (HAP)-supported Ru-Zn-CuI (Ru-Zn-CuI /HAP) as effective catalysts for the transformation of glycerol to lactic acid (LA).The catalysts were characterized by using different techniques. The effects of catalyst composition, reaction time, and temperature on the conversion and product distribution were investigated. It was revealed that Ru nanoparticles of less than 2 nm were dispersed uniformly on HAP. CuI could effectively inhibit the cleavage of C-C bonds, which led to improved yields of LA. Under optimized conditions, the yield of LA could reach 70.9 % over Ru-Zn-CuI /HAP. Furthermore, the catalyst could be reused at least four times without an obvious loss of activity or selectivity.

Water-in-Supercritical CO2 Microemulsion Stabilized by a Metal Complex.

Herein we propose for the first time the utilization of a metal complex for forming water-in-supercritical CO2 (scCO2 ) microemulsions. The water solubility in the metal-complex-stabilized microemulsion is significantly improved compared with the conventional water-in-scCO2 microemulsions stabilized by hydrocarbons. Such a microemulsion provides a promising route for the in situ CO2 reduction catalyzed by a metal complex at the water/scCO2 interface.

Preparation of Ru/Graphene using Glucose as Carbon Source and Hydrogenation of Levulinic Acid to γ-Valerolactone.

The preparation of functional materials and value-added chemicals using biomass-derived feedstocks is an interesting topic. Herein, we propose a method to prepare Ru/graphene catalyst using glucose as the carbon source. The catalyst was characterized by scanning and transmission electron microscopies, Raman and X-ray photoelectron spectroscopies, and X-ray diffraction. It was found that Ru particles of 2-6 nm were supported uniformly on high-quality graphene. The performance of the Ru/graphene for hydrogenation of levulinic acid to γ-valerolactone was studied. The Ru/graphene had much higher activity for the hydrogenation reaction than commercial Ru/C, and was active even at room temperature. The high activity was partially due to the unique structure of graphene, which resulted in an electron-enriched Ru nanocatalyst. In addition, the Ru/graphene could be reused at least four times without considerable decrease in activity, indicating the excellent stability of the catalyst under our conditions.

Bromide promoted hydrogenation of CO2 to higher alcohols using Ru-Co homogeneous catalyst.

Iodides are commonly used promoters in C2+OH synthesis from CO2/CO hydrogenation. Here we report the highly efficient synthesis of C2+OH from CO2 hydrogenation over a Ru3(CO)12-Co4(CO)12 bimetallic catalyst with bis(triphenylphosphoranylidene)ammonium chloride (PPNCl) as the cocatalyst and LiBr as the promoter. Methanol, ethanol, propanol and isobutanol were formed at milder conditions. The catalytic system had a much better overall performance than those of reported iodide promoted systems because PPNCl and LiBr cooperated very well in accelerating the reaction. LiBr enhanced the activity and PPNCl improved the selectivity, and thus both the activity and selectivity were very high when both of them were used simultaneously. In addition, the catalyst could be reused for at least five cycles without an obvious change of catalytic performance.

Using the hydrogen and oxygen in water directly for hydrogenation reactions and glucose oxidation by photocatalysis.

Direct utilization of the abundant hydrogen and oxygen in water for organic reactions is very attractive and challenging in chemistry. Herein, we report the first work on the utilization of the hydrogen in water for the hydrogenation of various organic compounds to form valuable chemicals and the oxygen for the oxidation of glucose, simultaneously by photocatalysis. It was discovered that various unsaturated compounds could be efficiently hydrogenated with high conversion and selectivity by the hydrogen from water splitting and glucose reforming over Pd/TiO2 under UV irradiation (350 nm). At the same time, glucose was oxidated by the hydroxyl radicals from water splitting and the holes caused by UV irradiation to form biomass-derived chemicals, such as arabinose, erythrose, formic acid, and hydroxyacetic acid. Thus, the hydrogen and oxygen were used ideally. This work presents a new and sustainable strategy for hydrogenation and biomass conversion by using the hydrogen and oxygen in water.

Cu and Boron Doped Carbon Nitride for Highly Selective Oxidation of Toluene to Benzaldehyde.

A novel Cu and boron doped graphitic carbon nitride catalyst (Cu-CNB) was synthesized using cheap precursors and systematically characterized. The selective oxidation of toluene proceeded very smoothly over the catalyst at 70 °C using tert-butyl hydroperoxide (TBHP) as the oxidant to exclusively afford benzaldehyde. The catalyst can be used for at least five cycles without decrease in activity and selectivity.

Gas promotes the crystallization of nano-sized metal-organic frameworks in ionic liquid.

Herein it was found that gas can be utilized as an activator to promote metal-organic framework (MOF) crystallization in IL at room temperature. The ultra-small MOF nanoparticles were obtained, and their size and porosity properties can be easily modulated by controlling gas pressure. The as-synthesized nano-sized Cu-MOF is an excellent candidate catalyst for the solvent-free oxidation of cyclohexene with oxygen.