RESUMEN
Obtaining air-stable and high-performance flexible n-type single-walled carbon nanotube (SWCNT)-based thermoelectric films used in wearable electronic devices is a challenge. In this work, the microstructure and thermoelectric properties of n-type SWCNT-based films have been optimized via doping C60 and its derivative into polyethylenimine/single-walled carbon nanotube (PEI/SWCNT) films. The result demonstrated that the dispersity of triethylene glycol-modified C60 (TEG-C60) was better in PEI/SWCNT films than that of pure C60. Among the prepared composite films, TEG-C60-doped PEI/SWCNT (TEG-C60/PEI/SWCNT) films exhibited the highest TE performance, achieving a peak electrical conductivity of 923 S cm-1 with a Seebeck coefficient of -42 µV K-1 at a TEG-C60/SWCNT mass ratio of 1:100. Compared to that of PEI/SWCNT, the power factor was increased significantly from 40 to 162 µW m-1 K-2 after the addition of TEG-C60, which was higher than that of films after the addition of C60. In addition, the n-type doped SWCNT films had good air stability at high temperatures, and the Seebeck coefficients of C60/PEI/SWCNT and TEG-C60/PEI/SWCNT at 120 °C were still negative and remained at 92% and 85%, respectively, after 20 days. Furthermore, a flexible TE device consisting of five pairs of p-n junctions was assembled using the optimum hybrid film, which generated a maximum output power of 3.6 µW at a temperature gradient of 50.2 K. Therefore, this study provides a facile way to enhance the thermoelectric properties of n-type carbon nanotube-based materials, which have potential application in flexible power generators.
RESUMEN
A crucial problem for the promising absorbent aqueous ammonia (NH3) is the low CO2 absorption rate. The mass transfer coefficient (K(G)) of CO2 in aqueous NH3-based absorbents on a wetted wall column facility was investigated. Monoethanolamine (MEA), piperazine (PZ), 1-methyl piperazine (1-MPZ) and 2-methyl piperazine (2-MPZ) were introduced into NH3 solutions as additives, all of which significantly increased the mass transfer coefficient of CO2 in the solutions. With CO2 loading of 0, 0.1, 0.3, 0.5 mol x mol(-1), K(G) of 3 mol x L(-1) NH3 + 0.3 mol x L(-1) PZ blended solution increased by 2, 2.2, 2.2, and 1.9 fold as compared to that of 3 mol x L(-1) NH3. Typically, PZ, the additive with best performance, was chosen for further study. The effects of temperature and PZ concentration on CO2 absorption in PZ solution and the blended NH3/PZ solution. The calculated pseudo first order rate constant [42.7 m3 x (mol x s)(-1)] was analyzed to further elucidate the reaction mechanism in the blended NH3/PZ solution.