Synergetic effects during co-pyrolysis of waste textiles and Ca/Fe-rich industrial sewage sludge: Reaction kinetics and product distribution.

Co-pyrolysis is a promising technology for industrial organic waste to utilize their unique resource and energy properties for efficient conversion into valuable products. This study was the first time to characterize the co-pyrolysis of waste textiles with Ca-rich industrial sludge and Fe-rich industrial sludge on a laboratory-scale fixed bed. The properties, mechanisms, gas, oil and carbon production were investigated as a function of temperature and mixing type. Co-pyrolysis increased the total weight loss from 50.05 % to 69.81 % for Ca-rich industrial sludge mixed with 50 % waste textiles and from 49.13 % to 70.01 % for Fe-rich industrial sludge mixed with 50 % waste textiles. The activation energy of co-pyrolysis was approximately 50 % lower compared to the pyrolysis of waste textiles alone. The optimal reaction model for the different reaction stages for all samples was three diffusion (D3). Co-pyrolysis resulted in lower CO and CO2 emission temperatures of about 25-110 °C and produced more short-chain organic compounds (C < 10). Co-pyrolysis produced more aldehydes and ketones organics. Moreover, co-pyrolysis char exhibited an elevated level of fatty alkyl side chains and bridge branching, as well as higher degrees of aromatization and stability. This study offers valuable insights into the potential application of pyrolysis for the management of Ca/Fe-rich industrial sludge and waste textiles, thereby serving as a basis for future utilization endeavors.

Time-varying propagation model and dynamic-feedback-phase correction for multiplexed orbital angular momentum beams in atmospheric turbulence.

Freespace optical (FSO) communication in an outdoor setting is complicated by atmospheric turbulence (AT). A time-varying (TV) multiplexed orbital angular momentum (OAM) propagation model to consider AT under transverse-wind conditions is formulated for the first time, and optimized dynamic correction periods for various TV AT situations are found to improve the transmission efficiency. The TV nature of AT has until now been neglected from modeling of OAM propagation models, but it is shown to be important. First, according to the Taylor frozen-turbulence hypothesis, a series of AT phase screens influenced by transverse wind are introduced into the conventional angular-spectrum propagation analysis method to model both the temporal and spatial propagation characteristics of multiplexed OAM beams. Our model shows that while in weak TV AT, the power standard deviation of lower-order modes is usually smaller than that of higher-order modes, the phenomena in strong TV AT are qualitatively different. Moreover, after analyzing the effective time of each OAM phase correction, optimized dynamic correction periods for a dynamic feedback communication link are obtained. An optimized result shows that, under the moderate TV AT, both a system BER within the forward-error-correction limit and a low iterative computation volume with 6% of the real-time correction could be achieved with a correction period of 0.18 s. The research emphasizes the significance of establishing a TV propagation model for exploring the effect of TV AT on multiplexed OAM beams and proposing an optimized phase-correction mechanism to mitigate performance degradation caused by TV AT, ultimately enhancing overall transmission efficiency.